NM-HDV-1T1-12 1-port 12-channel digital T1 packet voice trunk network module
Provides a single T1 connection with support for 12 channels of medium complexity voice compression using any of the following codecs:
G.729A, G.729AB, G.726 all versions, G.711 and fax relay. This module can also be configured to provide six channels of high- and medium-complexity voice compression using any of the following codecs:
G.729A, G.729AB, G.726 all versions, G.711, G.729, G.729B, G.723.1 all versions, G.728, GSM, GSMEFR, fax relay.
Also supports audio-conferencing; up to 15 conferences of six partici-pants and G.729.a to G.711 transcoding of up to 60 sessions in conjunction with Cisco CallManager.
Modular Router Solutions Voice and Fax Integration
3800 Series – 12.3(11)T 3700 Series – 12.2(8)T 3600 Series – 12.0(5)XK 2811, 2821, and 2851 – 12.3(8)T4 2691 – 12.2(8)T1 2600XM Series – 12.1(14) Mainline, 12.2(12) Mainline, 12.2(8)T1 2650 Series – 12.1(3)T 2620 Series – 12.0(5)XK 2610 Series – 12.0(5)XK
Prior to Cisco IOS 12.3 Mainline, requires a Cisco IOS “Plus” feature set.
12.3 Mainline and forward supported in “IP Voice”
feature set.
The NM-HDV-1T1-12 is a bundle of the following components:
• One network module (NM-HDV)
• One one-port T1 voice/
WAN interface card (VWIC-1MFT-T1) • One digital signal processor modules (PVDM-12)
NM-HDV-1T1-24 1-port 24-channel digital T1 packet voice trunk network module
Provides a single T1 connection with support for 24 channels of medium complexity voice compression using any of the following codecs:
G.729A, G.729AB, G.726 all versions, G.711 and fax relay. This module can also be configured to provide 12 channels of high- and medium-complexity voice compression using any of the following codecs:
G.729A, G.729AB, G.726 all versions, G.711, G.729, G.729B, G.723.1 all versions, G.728, GSM, GSMEFR, fax relay.
Also supports audio-conferencing; up to 15 conferences of six partici-pants and G.729.a to G.711 transcoding of up to 60 sessions in conjunction with Cisco CallManager.
Modular Router Solutions Voice and Fax Integration
3800 Series – 12.3(11)T 3700 Series – 12.2(8)T 3600 Series – 12.0(5)XK 2811, 2821, and 2851 – 12.3(8)T4 2691 – 12.2(8)T1 2600XM Series – 12.1(14) Mainline, 12.2(12) Mainline, 12.2(8)T1 2650 Series – 12.1(3)T 2620 Series – 12.0(5)XK 2610 Series – 12.0(5)XK
Prior to Cisco IOS 12.3 Mainline, requires a Cisco IOS “Plus” feature set.
12.3 Mainline and forward supported in “IP Voice”
feature set.
The NM-HDV-1T1-24 is a bundle of the following components:
• One network module (NM-HDV)
• One one-port T1 voice/
WAN interface card (VWIC-1MFT-T1) • One digital signal processor modules (PVDM-12)
Product Description
Supported Platforms and Minimum Cisco
IOS Versions Comments
Cisco Network Modules
T1/E1/J1 Digital Voice Network Modules
Product Description
Supported Platforms and Minimum Cisco
IOS Versions Comments
NM-HDV-2T1-48 2-port 48-channel enhanced digital T1 packet voice trunk network module
Provides two T1 connections with support for 48 channels of medium complexity voice compression using any of the following codecs:
G.729A, G.729AB, G.726 all versions, G.711 and fax relay. This module can also be configured to provide 24 channels of high- and medium-complexity voice compression using any of the following codecs:
G.729A, G.729AB, G.726 all versions, G.711, G.729, G.729B, G.723.1 all versions, G.728, GSM, GSMEFR, fax relay.
Also supports audio-conferencing; up to 15 conferences of six partici-pants and G.729.a to G.711 transcoding of up to 60 sessions in conjunction with Cisco CallManager.
Modular Router Solutions Voice and Fax Integration
3800 Series – 12.3(11)T 3700 Series – 12.2(8)T 3600 Series – 12.0(5)XK 2811, 2821, and 2851 – 12.3(8)T4 2691 – 12.2(8)T1 2600XM Series – 12.1(14) Mainline, 12.2(12) Mainline, 12.2(8)T1 2650 Series – 12.1(3)T 2620 Series – 12.0(5)XK 2610 Series – 12.0(5)XK
Prior to Cisco IOS 12.3 Mainline, requires a Cisco IOS “Plus” feature set.
12.3 Mainline and forward supported in “IP Voice”
feature set.
The NM-HDV-2T1-48 is a bundle of the following components:
• One network module (NM-HDV)
• One 2-port T1 voice/WAN interface card (VWIC-2MFT-T1) • Four digital signal processor modules (PVDM-12) NM-HDV-1T1-24E
1-port 24-channel enhanced digital T1 packet voice trunk network module
Provides a single T1 connection with support for 24 channels of high- and medium- complexity voice compression using any of the following codecs: G.729A, G.729AB, G.726 all versions, G.711, G.729, G.729B, G.723.1 all versions, G.728, GSM, GSMEFR, fax relay.
Also supports audio-conferencing; up to 15 conferences of six partici-pants and G.729.a to G.711 transcoding of up to 60 sessions in conjunction with Cisco CallManager.
Modular Router Solutions Voice and Fax Integration
3800 Series – 12.3(11)T 3700 Series – 12.2(8)T 3600 Series – 12.0(5)XK 2811, 2821, and 2851 – 12.3(8)T4 2691 – 12.2(8)T1 2600XM Series – 12.1(14) Mainline, 12.2(12) Mainline, 12.2(8)T1 2650 Series – 12.1(3)T 2620 Series – 12.0(5)XK 2610 Series – 12.0(5)XK
Prior to Cisco IOS 12.3 Mainline, requires a Cisco IOS “Plus” feature set.
12.3 Mainline and forward supported in “IP Voice”
feature set.
The NM-HDV-1T1-24E is a bundle of the following components:
• One network module (NM-HDV)
• One one-port T1 voice/
WAN interface card (VWIC-1MFT-T1) • One digital signal processor modules (PVDM-12)
T1/E1/J1 Digital Voice Network Modules
NM-HDV-1E1-12 1-port 12-channel digital E1 packet voice trunk network module
Provides a single E1 connection with support for 12 channels of medium complexity voice compression using any of the following codecs:
G.729A, G.729AB, G.726 all versions, G.711 and fax relay. This module can also be configured to provide six channels of high- and medium-complexity voice compression using any of the following codecs:
G.729A, G.729AB, G.726 all versions, G.711, G.729, G.729B, G.723.1 all versions, G.728, GSM, GSMEFR, fax relay.
Also supports audio-conferencing; up to 15 conferences of six partici-pants and G.729.a to G.711 transcoding of up to 60 sessions in conjunction with Cisco CallManager.
Modular Router Solutions Voice and Fax Integration
3800 Series – 12.3(11)T 3700 Series – 12.2(8)T 3600 Series – 12.0(5)XK 2811, 2821, and 2851 – 12.3(8)T4 2691 – 12.2(8)T1 2600XM Series – 12.1(14) Mainline, 12.2(12) Mainline, 12.2(8)T1 2650 Series – 12.1(3)T 2620 Series – 12.0(5)XK 2610 Series – 12.0(5)XK
Prior to Cisco IOS 12.3 Mainline, requires a Cisco IOS “Plus” feature set.
12.3 Mainline and forward supported in “IP Voice”
feature set.
The NM-HDV-2T1-48 is a bundle of the following components:
• One network module (NM-HDV)
• One 2-port T1 voice/WAN interface card (VWIC-2MFT-T1) • Four digital signal processor modules (PVDM-12)
Product Description
Supported Platforms and Minimum Cisco
IOS Versions Comments
NM-HDV-1E1-30 1-port 30-channel digital E1 packet voice trunk network module
Provides a single E1 connection with support for 30 channels of medium complexity voice compression using any of the following codecs:
G.729A, G.729AB, G.726 all versions, G.711 and fax relay. This module can also be configured to provide 18 channels of high- and medium-complexity voice compression using any of the following codecs:
G.729A, G.729AB, G.726 all versions, G.711, G.729, G.729B, G.723.1 all versions, G.728, GSM, GSMEFR, fax relay.
Also supports audio-conferencing; up to 15 conferences of six partici-pants and G.729.a to G.711 transcoding of up to 60 sessions in conjunction with Cisco CallManager.
Modular Router Solutions Voice and Fax Integration
3800 Series – 12.3(11)T 3700 Series – 12.2(8)T 3600 Series – 12.0(7)XK 2811, 2821, and 2851 – 12.3(8)T4 2691 – 12.2(8)T1 2600XM Series – 12.1(14) Mainline, 12.2(12) Mainline, 12.2(8)T1 2650 Series – 12.1(3)T 2620 Series – 12.0(7)XK 2610 Series – 12.0(7)XK
Prior to Cisco IOS 12.3 Mainline, requires a Cisco IOS “Plus” feature set.
12.3 Mainline and forward supported in “IP Voice”
feature set.
The NM-HDV-1E1-30 is a bundle of the following components:
• One network module (NM-HDV)
• One 1-port E1 voice/WAN interface card (VWIC-1MFT-E1) • Three digital signal processor modules (PVDM-12)
Cisco Network Modules
SERIES FEATURES OVERVIEW
T1/E1/J1 Digital Voice Network Modules
Product Description
Supported Platforms and Minimum Cisco
IOS Versions Comments NM-HDV-1E1-30E
1-port 30-channel enhanced digital E1 packet voice trunk network module
Provides a single E1 connection with support for 30 channels of high- and medium- complexity voice compression using any of the following codecs: G.729A, G.729AB, G.726 all versions, G.711, G.729, G.729B, G.723.1 all versions, G.728, GSM, GSMEFR, fax relay.
Also supports audio-conferencing; up to 15 conferences of six partici-pants and G.729.a to G.711 transcoding of up to 60 sessions in conjunction with Cisco CallManager.
Modular Router Solutions Voice and Fax Integration
3800 Series – 12.3(11)T 3700 Series – 12.2(8)T 3600 Series – 12.0(7)XK 2811, 2821, and 2851 – 12.3(8)T4 2691 – 12.2(8)T1 2600XM Series – 12.1(14) Mainline, 12.2(12) Mainline, 12.2(8)T1 2650 Series – 12.1(3)T 2620 Series – 12.0(7)XK 2610 Series – 12.0(7)XK
Prior to Cisco IOS 12.3 Mainline, requires a Cisco IOS “Plus” feature set.
12.3 Mainline and forward supported in “IP Voice”
feature set.
The NM-HDV-1E1-30E is a bundle of the following components:
• One network module (NM-HDV)
• One 1-port E1 voice/WAN interface card (VWIC-1MFT-E1) • Three digital signal processor modules (PVDM-12)
NM-HDV-2E1-60 2-port 60-channel digital E1 packet voice trunk network module
Provides two E1 connection with support for six channels of medium complexity voice compression using any of the following codecs:
G.729A, G.729AB, G.726 all versions, G.711 and fax relay. This module can also be configured to provide 30 channels of high- and medium- complexity voice compression using any of the following codecs:
G.729A, G.729AB, G.726 all versions, G.711, G.729, G.729B, G.723.1 all versions, G.728, GSM, GSMEFR, fax relay.
Also supports audio-conferencing; up to 15 conferences of six partici-pants and G.729.a to G.711 transcoding of up to 60 sessions in conjunction with Cisco CallManager.
Modular Router Solutions Voice and Fax Integration
3800 Series – 12.3(11)T 3700 Series – 12.2(8)T 3600 Series – 12.0(7)XK 2811, 2821, and 2851 – 12.3(8)T4 2691 – 12.2(8)T1 2600XM Series – 12.1(14) Mainline, 12.2(12) Mainline, 12.2(8)T1 2650 Series – 12.1(3)T 2620 Series – 12.0(7)XK 2610 Series – 12.0(7)XK
Prior to Cisco IOS 12.3 Mainline, requires a Cisco IOS “Plus” feature set.
12.3 Mainline and forward supported in “IP Voice”
feature set.
The NM-HDV-2E1-60 is a bundle of the following components:
• One network module (NM-HDV)
• One 2-port E1 voice/WAN interface card (VWIC-2MFT-E1) • Five digital signal processor modules (PVDM-12)
T1/E1/J1 Digital Voice Network Modules
Product Description
Supported Platforms and Minimum Cisco
IOS Versions Comments
NM-HDV-1J1-30 1-port 30-channel J1 voice/
fax network module
Provides a single J1 connection with support for 30 channels of medium complexity voice compression using any of the following codecs:
G.729A, G.729AB, G.726 all versions, G.711 and fax relay. This module can also be configured to provide 18 channels of high- and medium- complexity voice compression using any of the following codecs: G.729A, G.729AB, G.726 all versions, G.711, G.729, G.729B, G.723.1 all versions, G.728, GSM, GSMEFR, fax relay.
Also supports audio-conferencing; up to 15 conferences of six partici-pants and G.729.a to G.711 transcoding of up to 60 sessions in conjunction with Cisco CallManager.
Modular Router Solutions Voice and Fax Integration
3800 Series – 12.3(11)T 3700 Series – 12.2(8)T 3600 Series – 12.2(8)T 2811, 2821, and 2851 – 12.3(8)T4 2691 – 12.2(8)T1 2600XM Series – 12.2(8)T1 2600 Series – 12.2(8)T
Prior to Cisco IOS 12.3 Mainline, requires a Cisco IOS “Plus” feature set.
12.3 Mainline and forward supported in “IP Voice”
feature set.
The NM-HDV-1J1-30 is a bundle of the following components:
• One network module (NM-HDV)
• One one-port E1 voice/
WAN interface card (VWIC-1MFT-E1) • Three digital signal processor modules (PVDM-12)
NM-HDV-1J1-30E 1-port 30-enhanced- channel J1 voice/fax network module
Provides a single J1 connection with support for 30 channels of high and medium complexity voice compression using any of the following codecs: G.729A, G.729AB, G.726 all versions, G.711, G.729, G.729B, G.723.1 all versions, G.728, GSM, GSMEFR, fax relay.
Also supports audio-conferencing; up to 15 conferences of six partici-pants and G.729.a to G.711 transcoding of up to 60 sessions in conjunction with Cisco CallManager.
Modular Router Solutions Voice and Fax Integration
3800 Series – 12.3(11)T 3700 Series – 12.2(8)T 3600 Series – 12.2(8)T 2811, 2821, and 2851 – 12.3(8)T4 2691 – 12.2(8)T1 2600XM Series – 12.2(8)T1 2600 Series – 12.2(8)T
Prior to Cisco IOS 12.3 Mainline, requires a Cisco IOS “Plus” feature set.
12.3 Mainline and forward supported in “IP Voice”
feature set.
The NM-HDV-1J1-30 is a bundle of the following components:
Cisco Network Modules
T1/E1/J1 Digital Voice Network Modules
Product Description
Supported Platforms and Minimum Cisco
IOS Versions Comments NM-HDV
Digital T1/E1 packet voice trunk network module
— Spare
This network module is the carrier card for the PVDM-12 and VWIC cards. It is the basis for all six NM-HDV voice bundles. Up to 30 unique combinations of network module, DSP modules, and VWICs exist, allowing users to increase voice channel support from six up to 60 voice/fax channels. Also supports audio-conferencing; up to 15 conferences of six participants and G.711 to G.729, G.729a, G.729b, and G.729ab transcoding of up to 60 sessions in conjunction with Cisco CallManager.
Modular Router Solutions Voice and Fax Integration
3800 Series – 12.3(11)T 3700 Series – 12.2(8)T 3600 Series – 12.0(5)XK 2811, 2821, and 2851 – 12.3(8)T4 2691 – 12.2(8)T1 2600XM Series – 12.1(14) Mainline, 12.2(12) Mainline, 12.2(8)T1 2650 Series – 12.1(3)T 2620 Series – 12.0(5)XK 2610 Series – 12.0(5)XK
Prior to Cisco IOS 12.3 Mainline, requires a Cisco IOS “Plus” feature set.
12.3 Mainline and forward supported in “IP Voice”
feature set.
Requires at least one voice/WAN interface card (VWIC) or VIC-1J1 and a 12-channel DSP module (PVDM-12).
The VWIC2-1MFT-G703 is not supported on the NM-HDV.
NM-HDV-FARM-C36 Partitionable DSP resource farm; 36-port DSP network module
Includes 2 PVDMs allowing for up to six conference calls of six participants and G.711 to G.729, G.729a, G.729b, and G.729ab transcoding of up to 24 sessions in conjunction with Cisco CallManager. Expandable with the option to add additional PVDMs.
Modular Router Solutions Voice and Fax Integration
3800 Series – 12.3(11)T 3700 Series – 12.2(13)T 3600 Series – 12.2(13)T 2650 Series – 12.2(13)T 2600XM Series – 12.2(13)T 2811, 2821, and 2851 – 12.3(8)T4 2691 – 12.2(13)T VG200 – 12.2(13)T
Prior to Cisco IOS 12.3 Mainline, requires a Cisco IOS “Plus” feature set.
12.3 Mainline and forward supported in “IP Voice”
feature set.
Similar to NM-HDV, but no VWIC support.
NM-HDV-FARM-C54 Partitionable DSP resource farm; 54-port DSP network module
Includes 3 PVDMs allowing for up to nine conference calls of six participants and G.711 to G.729, G.729a, G.729b, and G.729ab transcoding of up to 36 sessions in conjunction with Cisco CallManager. Expandable with the option to add additional PVDMs.
Modular Router Solutions Voice and Fax Integration
3800 Series – 12.3(11)T 3700 Series – 12.2(13)T 3662 – 12.2(13)T 2600XM Series – 12.2(13)T 2811, 2821, and 2851 – 12.3(8)T4 2691 – 12.2(13)T VG200 – 12.2(13)T
Prior to Cisco IOS 12.3 Mainline, requires a Cisco IOS “Plus” feature set.
12.3 Mainline and forward supported in “IP Voice”
feature set.
Similar to NM-HDV, but no VWIC support.
SERIES FEATURES OVERVIEW
T1/E1/J1 Digital Voice Network Modules
Product Description
Supported Platforms and Minimum Cisco
IOS Versions Comments
PVDM-12
12-channel packet voice DSP module upgrade
— spare
Installable into an NM-HDV. It contains three T1 549 DSPs along with the necessary DSP SRAM to process six high- or medium-complexity compressed voice channels or 12 medium- complexity compressed voice channels.
Modular Router Solutions Voice and Fax Integration
3800 Series – 12.3(11)T 3700 Series – 12.2(8)T 3600 Series – 12.0(5)XK 2811, 2821, and 2851 – 12.3(8)T4 2691 – 12.2(8)T1 2600XM Series – 12.1(14) Mainline, 12.2(12) Mainline, 12.2(8)T1 2650 Series – 12.1(3)T 2620 Series – 12.0(5)XK 2610 Series – 12.0(5)XK
Prior to Cisco IOS 12.3 Mainline, requires a Cisco IOS “Plus” feature set.
12.3 Mainline and forward supported in “IP Voice”
feature set.
Requires at least one high-density voice network module (NM-HDV) and a voice/WAN interface card (VWIC).
Cisco Network Modules
NM-HDV-FARM-C90 Partitionable DSP resource farm; 90-port DSP network module
Includes 5 PVDMs allowing for up to 15 conference calls of six participants and G.711 to G.729, G.729a, G.729b, and G.729ab transcoding of up to 60 sessions in conjunction with Cisco CallManager.
Modular Router Solutions Voice and Fax Integration
3800 Series – 12.3(11)T 3700 Series – 12.2(13)T 3662 – 12.2(13)T 2600XM Series – 12.2(13)T 2811, 2821, and 2851 – 12.3(8)T4 2691 – 12.2(13)T VG200 – 12.2(13)T
Prior to Cisco IOS 12.3 Mainline, requires a Cisco IOS “Plus” feature set.
12.3 Mainline and forward supported in “IP Voice”
feature set.
Similar to NM-HDV, but no VWIC support.
PVDM2-8
8-channel packet voice/fax DSP module
Installable into a NM-HDV2 module or into the motherboard slots of a Cisco 2800 or 3800 Series router. Packet Voice Data Modules provide high-density voice connec-tivity, conferencing, and transcoding capabilities in Cisco IP Communications solutions.
Modular Router Solutions Voice and Fax Integration
3800 Series – 12.3(11)T 3700 Series – 12.3(7)T 2800 Series – 12.3(8)T4 2691 – 12.3(7)T 2600XM Series – 12.3(7)T
Requires Cisco IOS “IP Voice” feature set. Can be inserted into a PVDM slot on the motherboard of 2800 and 3800 routers.
When used with a 2600 or 3700 requires at least one NM-HDV2 module.