Volume 1
Hydraulics, Basic Principles and Components
Contents
• Basic principles
• Graphical symbols to DIN ISO 29 • Hydraulic fluids
• Hydraulic pumps • Hydraulic motors • Axial piston units • Hydraulic cylinders • Slew drives
• Hydraulic accumulators and their application • Isolator valves
• Directional valves
• Pressure control valves (flow control valves) • Filters and filtration techniques
• Accessories
• Connection techniques • Hydraulic small power units
Photos, drawings, circuit diagrams as well as graphics are available on CD-ROM “HYgraphics” R96000799.
No. of pages 325
Material no. DE R900018613 RD 00290 Material no. EN R900018614 RE 00290 Material no. ES R900018617 RS 00290
Volume 1 + CD-ROM “Hydraulic Trainer CBT“
Material no. DE R900884049 RD 00290 Material no. EN R90088400 RE 00290 Material no. ES R90088401 RS 00290
“The Hydraulic Trainer"
Training and informative books from the series "The Hydraulic Trainer“
The books describe the structure and operating principle of components of hydraulic drive and open and closed-loop con- trol technology.
Hydraulics Bosch Rexroth AG
RE 00843/02.07 DS4 137/64
Teachware / textbooks
“The Hydraulic Trainer"
Volume 2
Proportional and Servo-valve Technology
Contents
• Entry into proportional valve technology • Proportional valves, component technology • Load compensation by pressure compensator • Control techniques for proportional valves
• Criteria for engineering a control with proportional valves • Entry into servo-valve technology
• Servo-valves, component technology
• From the simple control to the closed control loop • Filtration in hydraulic systems with servo- and proportional
valves
• Examples of systems with servo- and proportional valves
No. of pages 286
Material no. DE R90001862 RD 0029 Material no. EN R900018626 RE 0029 Material no. ES R900018629 RS 0029
Volume 3
Planning and Design of Hydraulic Systems
Contents
• Engineering of hydraulic systems • Hydraulic fluids
• Heat balance in hydraulic systems • Hydraulic accumulators
• Safety regulations and arrangement of hydraulic accumula- tors in hydraulic systems
• Design of steel structures for hydraulic power units • Noise reduction measures
• Calculation and dimensioning of pipes in hydraulic systems • Internal preservation of hydraulic components and hydraulic
power units
• Corrosion protection by coating materials on outer surfaces • Packaging and transport
• Commissioning of hydraulic systems • Servicing of hydraulic systems
No. of pages 376
Material no. DE R90001838 RD 0028 Material no. EN R90001847 RE 0028 Material no. ES R90001849 RS 0028
Teachware / textbooks
Volume 4
Technology of 2-way cartridge valves
Contents
• Entry into the technology of 2-way cartridge valves
• Directional functions (design variants and notes on the application) • Pressure control functions
• Flow control functions
• Set-up of a control with 2-way cartridge valves • Examples of controls with 2-way cartridge valves
No. of pages 46 Material no. DE R90001837 RD 00280 Material no. EN R90001843 RE 00280 Material no. ES R90001846 RS 00280 Volume Fluidtechnik von A - Z Contents
Approx. 3000 terms with definitions and explanations of spe- cific terms in the field of hydraulics and pneumatics as well as their related areas such as measurement, open and closed- loop controls and electronics.
The keywords are listed in German and English. An English in- dex complements the book.
No. of pages 446
Material no. DE R900828272 RD 00249
“The Hydraulic Trainer"
Volume 6
Hydrostatic Drives with Control of the Secondary Unit including CD-ROM
Contents
• Terms and definitions • Symbols used
• History of the development of the secondary control at Rexroth • Basic principle of secondary control
• Axial piston units for use in secondary control systems • Dynamics of a drive with secondary control
• Electronic components of systems with drives with second- ary control
• Special characteristics of the secondary control
• Application examples of secondary controlled drives in the industrial and mobile sector
• Application examples of secondary controlled drives in test- ing and simulation technology
• Low-loss cylinder control in a hydraulic ring mains with im- pressed operating pressure
• The electric drive with variable speed
• Notes on the engineering of secondary controlled drives
No. of pages 96
Material no. DE R961002392 RD 00248 Material no. EN R961002391 RE 00248
Hydraulics Bosch Rexroth AG
RE 00843/02.07 DS4 139/64
Wörterbuch der Fluidtechnik/dictionary of fluid power technology
Contents
Approx. 4000 terms in five languages, source language Ger- man, i.e. the terms were translated into the individual foreign languages. Languages English French Spanish Italian No. of pages 360 Material no. DE R90001863 RD 09063
Teachware / textbooks
Hydraulics in Theory and Practice
Contents
The book deals in a compact form with all topics of "oil hydrau- lics" (excluding proportional and closed-loop control hydrau- lics) from the generation of pressure through to troubleshoot- ing in hydraulic systems. Apart from the description of compo- nents, the book focuses on the representation of circuits for practical applications in the field of stationary and mobile hy- draulics.
Drawings, circuit diagrams and colour graphics from the books are also available on the CD-ROM “HYgraphics” R9007007.
No. of pages 29
Material no. DE R961000782 Material no. EN R961000784
Hydraulics in Mobile Machinery
Contents
• Introduction into hydraulics
• Pumps and hydraulic motors in general • Gear pumps and motors
• Electrohydraulic pumps • Compact power units • Isolator valves
• Pressure control valves • Flow control valves • Directional valves
• Basic circuits of mobile hydraulics
• Directional valve blocks for mobile applications • Applications
• Electrohydraulic hitch control for tractors (EHR) • Hydrostatic fan drives in vehicles
• CAN bus in der mobile hydraulics • Fluids
No. of pages 202
Material no. DE R961000790 Material no. EN R961000791
Hydraulics Bosch Rexroth AG
RE 00843/02.07 DS4 141/64
Hydraulic Trainer CBT Version 4.0
Revised version of the Hydraulic Trainer with updated graphics and new user guidance.
The contents, circuits and sectional models were adapted to the new Hydraulic Trainer, Volume Hydraulics, Basic Princi- ples and Components
Contents
• Basic principles of hydraulics • Physical basic principles
• Exercises relating to the individual chapters • Specialist dictionary
• Secondary control • Axial piston units
• Animation of circuits and components System requirements
• Microsoft Windows 98 / NT 4.0 / ME / 2000 / XP SP • Pentium 200 MHz or better
• 32 MB RAM
• Min. XGA, monitor resolution 024 x 768 • Approx. 70 MB hard disk space
• CD-ROM drive
Material no. DE/EN/ES R900884371