TOTALS MENU SELECTIONS

Fwd Dist Trav

Machine Hrs Total Fuel

Total Rev Dist Trav

Total Load Cnt Total Time / Cycle Loads / Hr Distance / Cycle Fuel / Cycle Wait Time / Cycle Total Load Cnt

Max Idle Time Total Fwd Dist Trav

Machine Hrs Total Fuel

Total Rev Dist Trav

Total Load Cnt

Max Idle Time Total Fwd Dist Trav

Machine Hrs Total Fuel

Total Rev Dist Trav Total Load Cnt Totals Cycle Data Jobsite Totals Lifetime Totals Operator Totals

Cycle Data

- Total Load Cnt: This option displays the number of times that the machine discharged a load.

- Loads/hr: This option displays the average number of loads per hour. - Wait Time/Cycle: This option displays the average machine idle time per cycle. - Total Time/Cycle: This option displays the average machine cycle time.

- Distance/Cycle: This option displays the average distance that was travelled per cycle.

- Fuel/Cycle: This option displays the average amount of fuel that was used per cycle, shown in liters or US gallons.

Operator Totals

Use the scroll up/left button and the scroll down/right button to move between the various screens and use the "Back" button to return to the "Totals" Menu.

When an operator is activated with the Messenger system, all of the values are zeroed. The Messenger system resets the "Operator Totals" when an operator is activated on the system.

NOTE: If complete "Cycle Data" and "Operator Totals" history is desired, do not use "Activate" in the "Operator" menu. Also, previous "Cycle Data" and "Operator Totals" for all operators can be accessed by using Cat ET version 2005B or later.

- Total Load Cnt: This option displays the number of times that the machine has discharged a load since the activation of the current operator. - Tot Fwd Dist Trav: This option displays the distance that the machine has driven in

forward gear since the activation of the current operator.

- Tot Rev Dist Trav: This option displays the distance that the machine has driven in reverse gear since the activation of the current operator.

- Max Idle Time: This option displays the time that the machine has been stationary with the hoist in the FLOAT position and with the engine

running.

- Machine Hrs: This option displays the number of hours that the machine has been operating since the activation of the current operator. - Total Fuel: This option displays the information about the fuel consumption

Jobsite Totals

The "Jobsite Totals" menu option is intended to be used by dealers and rental fleet customers to help manage their machines.

Use the scroll up/left button and the scroll down/right button to move between the various screens and use the "Back" button to return to the "Totals" Menu:

NOTE: Cat ET version 2005B or later is required to zero the counters. Also, a password must be set within Cat ET to zero the "Jobsite Totals."

- Total Load Cnt: This option displays the number of times that the machine has discharged a load on the current jobsite.

- Tot Fwd Dist Trav: This option displays the distance that the machine has driven in forward gear on the current jobsite.

- Tot Rev Dist Trav: This option displays the distance that the machine has driven in reverse gear on the current jobsite.

- Max Idle Time: This option displays the time that the machine has been stationary with the hoist in the FLOAT position and with the engine running on the current jobsite.

- Machine Hrs: This option displays the number of hours that the machine has been operating on the current jobsite.

- Total Fuel: This option displays the information about the fuel consumption of the machine on the current jobsite.

Lifetime Totals

Use the scroll up/left button and the scroll down/right button to move between the various screens and use the "Back" button to return to the "Totals" Menu.

NOTE: These totals cannot be zeroed without a factory password.

- Total Load Cnt: This option displays the number of times that the machine has discharged a load during the machine's lifetime.

- Tot Fwd Dist Trav: This option displays the distance that the machine has driven in forward gear during the machine's lifetime.

- Tot Rev Dist Trav: This option displays the distance that the machine has driven in reverse gear during the machine's lifetime.

- Max Idle Time: This option displays the time that the machine has been stationary with the hoist in the FLOAT position and with the engine running during the machine's lifetime.

- Machine Hrs: This option displays the number of hours that the machine has been operating during the machine's lifetime.

- Total Fuel: This option displays the information about the fuel consumption of the machine during the machine's lifetime.

Settings Menu

The settings menu displays information within the following additional menu options: - Monitoring System

- Transmission

The settings menu allows for adjustment and viewing of various parameters for the Messenger System and the Transmission System. Several "Monitoring System" parameters are adjustable, but Cat ET is required to change any parameters in the Transmission/Chassis ECM.

Use the scroll up/left button and the scroll down/right button to move between the various screens and use the "Back" button to return to the "Main Menu."

21

Settings Menu Options Monitoring System

- Language: Select this option to change the language that is shown on the display. Currently English, Spanish, German, and French languages are available.

- Units: Select this option to choose either the US or the Metric measurement system.

- Contrast: Select this option to adjust the contrast of the display. This will improve the visibility of the information. The display provides a bar graph for viewing adjustments.

- Backlight Select this option to adjust the backlighting of the display. This will improve the visibility of the information. The display provides a bar graph for viewing adjustments.