An example of the output for a typical standalone installation is as follows:
[root@/h ~]# sh nsm2012.2_servers_linux_x86.sh
########## PERFORMING PRE-INSTALLATION TASKS ##########
Creating staging directory...ok Running preinstallcheck...
Checking if platform is valid...ok Checking for correct intended platform...ok Checking for CPU architecture...ok Checking if all needed binaries are present...ok Checking for platform-specific binaries...ok Checking for platform-specific packages...ok Checking in System File for PostgreSQL and XDB parameters...ok Checking for PostgreSQL...ok Checking if user is root...ok Checking if user nsm exists...ok Checking if iptables is running...ok Checking if system meets RAM requirement...ok Checking for sufficient disk space...ok Noting OS name...ok Stopping any running servers
########## EXTRACTING PAYLOADS ##########
Extracting and decompressing payload...ok Extracting license manager package...ok
########## GATHERING INFORMATION ##########
1) Install Device Server only 2) Install GUI Server only
3) Install both Device Server and GUI Server Enter selection (1-3) []> 3
Do you want to do NSM installation with base license? (y/n) [y]>
Enter base directory location for management servers [/usr/netscreen]>
Enable FIPS Support? (y/n) [n]>
########## GENERAL SERVER SETUP DETAILS ##########
Will this machine participate in an HA cluster? (y/n) [n]>
########## DEVICE SERVER SETUP DETAILS ##########
The Device Server stores all of the user data under a single directory.
By default, this directory is /var/netscreen/DevSvr. Because the user data (including logs and policies) can grow to be quite large, it is sometimes desirable to place this data in another partition.
Please enter an alternative location for this data if so desired, or press ENTER for the location specified in the brackets.
Enter data directory location [/var/netscreen/DevSvr]>
########## GUI SERVER SETUP DETAILS ##########
The GUI Server stores all of the user data under a single directory.
By default, this directory is /var/netscreen/GuiSvr. Because
the user data (including database data and policies) can grow to be quite large, it is sometimes desirable to place this data in another
partition.
Please enter an alternative location for this data if so desired, or press ENTER for the location specified in the brackets.
Enter data directory location [/var/netscreen/GuiSvr]>
The GUI Server stores all of the database logs under a single directory.
By default, this directory is /var/netscreen/GuiSvr/xdb/log. Because the database log can grow to be quite
large, it is sometimes desirable to place this log in another partition.
Please enter an alternative location for this log if
so desired, or press ENTER for the location specified in the brackets.
Enter database log directory location [/var/netscreen/GuiSvr/xdb/log]>
Enter the management IP address of this server [10.157.48.108]>
Enter the https port for NBI service [8443]>
Setting GUI Server address and port to 10.157.48.108:7801 for Device Server Please enter a password for the 'super' user
Enter password (password will not display as you type)>
Please enter again for verification
Enter password (password will not display as you type)>
Enter the one-time password for this Gui Server
Enter password (password will not display as you type)>
Please enter again for verification
Enter password (password will not display as you type)>
Will a Statistical Report Server be used with this GUI Server? (y/n) [n]>
==> CFM user is set to 'cfmuser' CFM password for user 'cfmuser'
Enter password (password will not display as you type)>
Please enter again for verification
Enter password (password will not display as you type)>
Enter the same password again for CFM user Changing password for user cfmuser.
New UNIX password:
Retype new UNIX password:
passwd: all authentication tokens updated successfully.
########## HIGH AVAILABILITY (HA) SETUP DETAILS ##########
Will server processes need to be restarted automatically in case of a failure?
(y/n) [y]>
########## BACKUP SETUP DETAILS ##########
Will this machine require local database backups? (y/n) [y]>
Enter hour of day to start the database backup (00 = midnight, 02 = 2am, 14 = 2pm ...)[02]>
Will daily backups need to be sent to a remote machine? (y/n) [n]>
Enter number of database backups to keep [7]>
Enter the rsync backup timeout [3600]>
Enter database backup directory [/var/netscreen/dbbackup]>
########## DEVSVR DB SETUP DETAILS ##########
Enter Postgres DevSvr Db port [5432]>
Enter Postgres DevSvr Db super user [nsm]>
Enter Postgres DevSvr Db password for user 'nsm' Enter password (password will not display as you type)>
Please enter again for verification
Enter password (password will not display as you type)>
########## POST-INSTALLATION OPTIONS ##########
Start server(s) when finished? (y/n) []> y
########## CONFIRMATION ##########
About to proceed with the following actions:
- Install Device Server - Install GUI Server
- Install High Availability Server
- Store base directory for management servers as /usr/netscreen - This machine will have base license with maximum 25 devices - This machine does not participate in an HA cluster
- Store Device Server data in /var/netscreen/DevSvr - Store GUI Server data in /var/netscreen/GuiSvr
- Store GUI Server database log in /var/netscreen/GuiSvr/xdb/log - Use IP address 10.157.48.108 for management
- Use port 8443 for NBI Service
- Connect to GUI Server at 10.157.48.108:7801 - Set password for 'super' user
- CFM user: cfmuser
- CFM Password set for 'cfmuser'
- Servers will be restarted automatically in case of a failure - Local database backups are enabled
- Start backups at 02
- Daily backups will not be sent to a remote machine - Number of database backups to keep: 7
- HA rsync command backup timeout: 3600
- Create database backup in /var/netscreen/dbbackup - Postgres DevSvr Db Server port: 5432
- Postgres DevSvr Db super user: nsm - Postgres DevSvr Db password set for 'nsm' - Start server(s) when finished: Yes Are the above actions correct? (y/n)> y
########## PERFORMING INSTALLATION TASKS ##########
INSTALLING Device Server
---Looking for existing RPM package...ok Removing existing Device Server RPM...ok Installing Device Server RPM...ok Installing JRE...ok Installing GCC...ok Creating var directory...ok Creating /var/netscreen/dbbackup...ok Putting NSROOT into start scripts...ok Filling in Device Server config file(s)...ok Setting permissions for Device Server...ok Setting up PostgreSQL for DevSvr
---Setting up PostgreSQL for DevSvr...ok Installation of Device Server complete.
INSTALLING GUI Server
---Looking for existing RPM package...ok Removing existing GUI Server RPM...ok Installing GUI Server RPM...ok Installing JRE...ok Installing GCC...ok Creating var directory...ok Putting NSROOT into start scripts...ok Filling in GUI Server config file(s)...ok Setting permissions for GUI Server...ok Running generateMPK utility...ok Running fingerprintMPK utility...ok Installation of GUI Server complete.
INSTALLING HA Server
---Looking for existing RPM package...ok Removing existing HA Server RPM...ok Installing HA Server RPM...ok Creating var directory...ok Putting NSROOT into start scripts...ok Filling in HA Server config file(s)...ok Setting permissions for HA Server...ok Installation of HA Server complete.
SETTING START SCRIPTS
---Enabling Device Server start script...ok Enabling GUI Server start script...ok Enabling HA Server start script...ok
########## PERFORMING POST-INSTALLATION TASKS ##########
Running nacnCertGeneration...ok Running idpCertGeneration...ok Converting GuiSvr SetDB to XDB ...ok Loading GuiSvr XDB data from init files ...ok ok
Running webproxy Cert Generation...ok Removing staging directory...ok Starting GUI Server...ok Starting Device Server...ok Starting HA Server...ok NOTES:
- Installation log is stored in
/usr/netscreen/DevSvr/var/errorLog/netmgtInstallLog.20080902134533 - This is the GUI Server fingerprint:
14:7C:3A:AD:F9:96:9A:80:7B:0B:D7:49:DE:CC:91:B8:4F:42:77:42
You will need this for verification purposes when logging into the GUI Server. Please make a note of it.
[root@C73-16 ~]#