User Mode

Common Settings

Initial Functions Auto Clear Setting Audible Tones

Inch Entry

Drawer Enigibility For APS/ ADS

Store Paper Type

Energy Saver Mode Function Key Wake UP

Energy Consumption in Sleep Mode LTRR/STMT Originals Selection Tray Designation Printing Priority

Manual Paper Standard Settings

Local Printing Standard Mode

Initializing Common Settings

copy*/box/other return*, do not return

Use it to turn on/off the buzzer. (on*/off; input sound, alarm sound, job end sound)

Use it to use Inch input. (on*/off) Use it to turn on cassette selection for each cassette folder.

(manual feed: on/off*; cassette holder: on*/ off; paper type: consider/do not consider*) Use it to select a paper type for the front paper deck, each cassette, and side paper deck. (plain paper*, letterhead, thick paper, colored paper)

Use it to change the level of power save mode. (-10%*/-25%/-50%/None)

Use it to turn on/off the mechanism used to assign a function key for disabling sleep mode/power save mode. (on/off*)

Use it to set the level of power consumption for sleep mode. (low*/high)

Use it to turn off the mechanism used to distinguish an LTRR/STMT original. (manual/LTRR*/STMT)

Use it to select a delivery function for the finisher tray. (tray A: copy*/printer/other; tray B: copier/printer*/other)

Use it to set priority of printing. (copy*/print/other)

Use it to register standard mode for manual feed. (register/do not register*)

Use it to set standard mode for local printing. (number of prints: 1* to 2000; double-sided print: yes/no*; remove after printing: yes/no*; integrate text: yes/no*; sort: sort*/group/staple sort/shift sort/shift group; paper select: auto*/ select source)

Use it to return common settings to factory settings. (yes/no)

Timer Settings

Copier Settings Standard Key 1,2 Setting

Auto Orientation

Auto Collate

Job Duration Display Image

Orientation Priority Photo Mode

Standard Settings

Initialize Copier Settings Date & Time

Change Auto Sleep Time

Changing Auto Clear Time

Low Power Mode Time

Time Until Unit Quiets Down

Daily Timer Seting

Use it to set the current date and time. (12-digit number)

Use it to set the interval from the end of operation to the start of sleep state. (10, 15, 30, 40, 50, 90 min; 1*, 2, 3, 4 hr) Use it to set the interval from the end of operation to the start of the Basic screen on the touch panel. (0, 1 to 9 min; 2 min*) Use it to set the interval from the end of operation to the start of low power mode. (10, 15*, 20, 30, 40, 50, 60, 90 min; 2 to 4 hr)

Use it to set the interval from the end of operation to the start of silent mode. (in which the laser scanner motor is put to rest; 0 to 9 min; 1 min*)

Use it to set the time at which the control panel power switch is automatically turned Use it to register a Preference key on the Ba- sic screen. Select from mode keys and mode memory keys of mode memory on the Ex- tended Mode screen.

Use it to automatically rotate images based on the result of computing original size and reproduction ratio and to copy the resulting images on selected paper. (ON*/OFF) Use it to select a function by which sorter mode is switched to sort mode in response to the placement of originals in the feeder. (ON*/OFF)

Use it to specify whether to display copy wait time. (ON/OFF*)

Use it to select priority on image orientation. (ON/OFF*)

Use it to specify whether to use film photo mode. (ON/OFF*)

Use it to change copy mode items stored as standard modes. (register/initialize)

Use it to reset to factory settings for each item of copier settings. (yes/no)

Cleaning/Adjustment Zoom Fine Adjustment

Feeder Cleaning

Wire Cleaning Saddle Stitcher Staple Repositioning Saddle Stitch Position Adjustment

Exposure Recalibration

Use it to fine-adjust any small discrepancy between original and copy images for vertical and horizontal reproduction ratios. (-1.0% to +1.0%; 0.1% increments; 0%*)

Use it to clean the pickup roller assembly by feeding paper from the ADF.

Use it to clean the charging wire. Use it to edge out the staple unit in the saddle stitcher unit.

Use it to adjust the position of saddle stitch. (-2.0 to +2.0 mm; 0.1mm-incrmenets; 0 mm*) Use it to correct any discrepancy between original and print images occurring while the density adjustment index is kept at the middle. (9 steps; 5*) Mail Box Settings Box Set/Store

Photo Mode

Standard Scan Settings

Use it to register/set a box. (100 boxes max.; box No.: 0 to 99; ID No.: 4 digits; file storage period: 1, 2, 3, 6, 12 hr, 1, 2, 3, 7, 30 days, indefinite, 2 hr*; name: 24 characters max.;

initializing a box)

Use it to specify whether to use film photo mode in conjunction with the box function. (ON/OFF*)

Use it to change the standard mode for read settings. (registering/initializing) Report Settings Additional Functions

Settings

Use it to print additional function mode settings.

System Settings Administrator Info Setteing

Machine info Setting Department ID Management

Clear message Board Network Initial Settings

Setting Report UI (acces- sory accommodation)

Use it to register system administra- tor data. (control ID: 7 digits; pass- word: 7 digits; administrator name: 32 characters; administrator mail ad- dress; administrator contact info; ad- ministrator comment)

Use it to register a device name and location.

Use it to enable/disable* ID control by group. (group ID, ID No., counter upper limit, count control, count all clear, counter print, non ID-specific job print)

Use it to delete messages on the bul- letin board.

Use it to make settings related to TCP/IP, NetWare, AppleTalk, Ethernet driver.

Use it to make settings for remote UI. (use*/do not use)