• No results found

VoIP Client

In document Windows Embedded Standard 7 (Page 39-44)

6. Sessions

6.11. VoIP Client

Menu path: Setup > Sessions > VoIP Client

In the VoIP Client section, you can configure the client for IP telephony. IGEL Universal Desktop provides the VoIP client Ekiga (http://ekiga.org (http://ekiga.org/ - http://ekiga.org/)). The client allows the use of SIP and H.323. In addition to local contacts, LDAP address books can be used too.

You will find a detailed description of the configuration options in the original documentation for the Ekiga client at http://wiki.ekiga.org/index.php/Manual (http://wiki.ekiga.org/index.php/Manual).

40

IGEL Technology GmbH Windows Embedded Standard 7 3.12.100

7. Accessories

Menu path: Setup > Accessories

Information on other accessories provided by the IGEL Universal Desktop can be found here.

7.1. Setup Session

Menu path: Setup > Accessories > Setup Session

If a password was set up for the administrator, the IGEL setup can only be opened with administrator rights, i.e. after entering the password (see Password (Seite 48)). However, individual areas of the setup can be enabled for the user, e.g. to allow them to change the system language or configure a left-handed mouse.

Under Security > Password, enable the password for the administrator and the setup user. 1.

Under Accessories > Setup Session > Page Permissions, enable those areas to which the user is to have 2.

access.

- A check in the checkbox indicates that the node is visible in the setup.

- A green symbol (open lock) indicates that the user is able to edit the parameters on this setup page.

Figure 6: Restricted access to the setup

If you enable a setup page on the lower levels, the node points required for access will automatically be marked as visible (but blocked for editing purposes).

41

IGEL Technology GmbH Windows Embedded Standard 7 3.12.100

7.2. Sound Mixer

Menu path: Setup > Accessories > Sound Mixer

Here, you can set the system volume or mute the sound. • Use IGEL Setup for configuring system audio settings:

 Use IGEL Setup  Do not use IGEL Setup • Mute sound:

 Mute  Do not mute

Master volume: Adjust the master volume by moving the volume control or entering a number between 0 and 100.

Enable display port audio device:

 Switch on  Do not switch on

7.3. Windows Services

Menüpfad: Setup > Zubehör > Windows Services

Here, you can launch or disable the following Windows services.: • .NET runtime optimization

• Discovery of UPnP devices • Remote desktop support

• IEEE 802.1X authentication for wired Ethernet interfaces • SCCM

• BITS • UNIX print

Services for USB redirection: • USB for remote desktop

• Leostream Connect USB redirection • vWorkspace USB redirection • Redhat Spicew USB redirection

42

IGEL Technology GmbH Windows Embedded Standard 7 3.12.100

8. User interface

Menu path: Setup > User Interface

8.1. Screen

Menu path: Setup > User Interface > Display

Here, you can configure the settings for the screens used. • Use IGEL Setup for configuring display settings

 The display settings are configured using this setup page.

 The display settings are not configured via the IGEL setup. The deactivation will be effective after a reboot.

Number of screens: Number of screens used • Arranges a number of screens in a single row. • Arranges a number of screens in two rows. • Rotates the selected screen anti-clockwise. • Rotates the selected screen clockwise.

• or Selected screen: Selects the screen whose settings are to be changed.

Screen resolution: Specifies the resolution for the selected screen. From Version 3.12.100, the setting is configured via a slider. If the slider is at the far left, the screen resolution will be detected

automatically.

In order for automatic detection to work, the monitor must supply the correct data.

For details of the maximum resolutions supported by IGEL models, please see the data sheet for the relevant device.

For the rotation (pivot), at least 128 MB as video memory must be configured in the thin client's BIOS.

Advanced

43

IGEL Technology GmbH Windows Embedded Standard 7 3.12.100

8.1.1. Options

Menu path: Setup > User Interface > Display > Options

Here, you can set the color depth of the screen and the screen saver. • Color Depth

Possible values:

- True Color: Up to 16.8 million colors are displayed. - 65535 Colors: Up to 65535 colors are displayed. • Use blanking screensaver

You can also set up a screen saver in the Energy options (Seite 62).

 If no user interaction takes place within the period defined under Inactivity timeout for the blanking of screensaver, the screen saver will start.

 The screen saver will never be started. • On resume, password protect

 The user must enter their password in order to end the screen saver and gain access to the screen, keyboard and mouse again.

 Access to the screen, keyboard and mouse is possible without entering a password.

Inactivity timeout for the screen saver: If no user interaction takes place within the number of minutes specified here, the screen saver will start.

Possible values: 1 to 300

8.2. Language

Menu path: Setup > User Interface > Language

Select the setup language and the keyboard layout, and configure your local settings (format for time, numbers etc.).

For UD W7 systems, language packages are available as partial updates on the http://myigel.biz (http://myigel.biz - http://myigel.biz) website. These allow you to change the system language too.

Installing language packages for UD-W7 can take up to 45 mins! Do not cancel the procedure prematurely as this could result in system inconsistencies!

44

IGEL Technology GmbH Windows Embedded Standard 7 3.12.100

8.3. Input

Menu path: Setup > User Interface > Input

In the Input area, you can define the keyboard and mouse specifications such as keyboard layout, left-hand mode for the mouse or double-click settings. These settings override the Windows system settings.

In document Windows Embedded Standard 7 (Page 39-44)

Related documents