SFA OS Release 1.4.1
WOS7000, WOS6000, WOS1600
Revision: A0 September 2014
WOS Access S3
Version 2.0
Important Information
Information in this document is subject to change without notice and does not represent a commitment on the part of DataDirect Networks, Inc. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose other than the purchaser’s personal use without the written permission of DataDirect Networks, Inc.
© 2014 DataDirect Networks, Inc. All rights reserved.
DataDirect Networks, the DataDirect Networks logo, DDN, DirectMon, DirectRaid, EXAScaler, GRIDScaler, HScaler, IME, Infinite Memory Engine, Information in Motion, In-Storage Processing, NAS Scaler, NoFS, ObjectAssure, ReACT, SFA, SFA 10000 Storage Fusion Architecture, SFA10K, SFA12K, SFX, Storage Fusion Architecture, Storage Fusion Fabric, Storage Fusion Xcelerator, SwiftCluster, WOS, the WOS logo are registered trademarks or trademarks of DataDirect Networks, Inc. All other brand and product names are trademarks of their respective holders.
DataDirect Networks makes no warranties, express or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose of any products or software. DataDirect Networks does not warrant, guarantee or make any representations regarding the use or the results of the use of any products or software in terms of correctness, accuracy, reliability, or otherwise. The entire risk as to the results and performance of the product and software are assumed by you. The exclusion of implied warranties is not permitted by some jurisdictions; this exclusion may not apply to you.
In no event will DataDirect Networks, their directors, officers, employees, or agents (collectively DataDirect Networks) be liable to you for any consequential, incidental, or indirect damages, including damages for loss of business profits, business interruption, loss of business information, and the like, arising out of the use or inability to use any DataDirect product or software even if DataDirect Networks has been advised of the possibility of such damages by you. Because some jurisdictions do not allow the exclusion or limitation of liability for consequential or incidental damages, these limitations may not apply to you. DataDirect Networks liability to you for actual damages from any cause whatsoever, and regardless of the form of the action (whether in contract, tort including negligence, product liability or otherwise), is limited to the sum you paid for the DataDirect product or software.
Table of Contents
1.0 Overview ... 4
2.0 Product Description ... 4
2.1 Product Documentation ... 4
3.0 Hardware Requirements ... 4
WOS Access S3 Storage Firmware v2.5 or Above ... 4
Operating System ... 4
4.0 Resolved Issues ... 5
5.0 Known Issues ... 5
1.0
Overview
This document applies to the WOS Access S3, version 2.0 release for DataDirect Networks’
WOS7000, WOS6000, and WOS1600 systems.
2.0
Product Description
WOS Access S3 is a private cloud storage hardware and software solution compatible with the Amazon S31 web service. It is designed to provide a simple web-service interface that can be used to store and retrieve any amount of data, at any time, from anywhere on the local network or web.
The WOS Access S3 is a scalable platform for enterprise customers who wish to transfer huge in-house workloads to provide storage services to internal business units to improve security and lower the cost.
The DDN S3 API is compatible with the Amazon Web Service (AWS) REST S3 API, which provide a smooth transition for the S3 applications that can switch from Amazon’s public cloud to a S3 private cloud with just a reconfiguration.
2.1
Product Documentation
The current release includes:
• DDN WOS Access S3 Admin Guide
This guide is intended for field engineers, QA test engineers, and product administrators.
• DDN S3-Compatible API Reference Guide
This guide is intended for third party developers responsible for using the S3-Compatible API (DDN S3 API) and generating their own applications for their existing businesses. For details about the specific DDN S3 API calls, please refer to the Amazon Web Services S3 documentation at http://aws.amazon.com/documentation/s3/.
3.0
Hardware Requirements
WOS Access S3 Storage Firmware v2.5 or Above
• WOS Access S3 cluster components:
o Minimum four metanodes
o One management node per cluster
o WOS core nodes
Operating System
Linux RHEL or CentOS 6.5, EPEL, and HDP repositories (private mirrored by IT or public repo)
1 S3 is a trademark of Amazon.
DataDirect Networks WOS Access S3 v2.0 Product Release Notes | 4
4.0
Resolved Issues
None
5.0
Known Issues
None
6.0
Support
Please contact DataDirect Networks Support at any time for assistance. Support can be reached by the following methods:
Web
Support Portal https://portal.ddnsupport.com
Portal Assistance [email protected]
Technical Support Bulletins http://www.ddn.com/en/technical-support-bulletins
Support Email [email protected]
Mailing List Subscriptions [email protected]
Telephone
