03/13
© Copyright 2013 Parchem Construction Supplies Pty Limited This publication is copyright. All rights are reserved. Reproduction in whole or in part is prohibited without written permission.
Application details are provided as a suggestion only of intended use.
This catalogue is produced as a guide to the product range. Some items may not be available at all outlets. Owing to a continual product improvement, designs & specifications may be subject to change without notice.
The complete range of products and solutions for the waterproofing contractor....
Manufacturer and distributor of industry leading brands
®
stencil
CONTENTS
Primers
4-5
Patching Compounds
5
Liquid Applied Membranes
5-6
Tile Adhesive
7
Liquid Applied Accessories
7
Self Adhesive Membranes
7
Pre-applied Membrane & Accessories
7-8
Torch Applied Accessories
8
Torch Applied Membranes
9-10
Cementitous Membranes
10-11
Adhesives
11
Sealants
11-12
Concrete Jointing
13
Waterstops
13
Concrete Repair
13
Industrial Flooring
14
Tools & Equipment
15-19
Primer 4
Used on non porous surfaces with Thioflex 600 GG & Thioflex 600 PG.
Part ID DescrIPtIon
665207 PRIMR NO.4 250ML
Primer 7
Used on porous surfaces with Thioflex 600 PG / GG & Colpor 200 PF.
Part ID DescrIPtIon
665209 PRIMER NO.7 1L
Primer 9
Used on plastics with Hilastic. Other sealants after testing.
Part ID DescrIPtIon
665212 PRIMER NO.9 250ML
Primer 11
Used on non porous surfaces with Hilastic.
Part ID DescrIPtIon
665216 PRIMER NO.11 250ML
Primer 13
2 part epoxy primer - Used on porous surfaces with NS 280, Emer-Seal 200; also Emer-Seal PU 40, Thioflex 600 (PG & GG) Emer-Seal CR when sealant in being immersed.
Part ID DescrIPtIon
665221 PRIMER NO.13 A-B/250ML
Primer 21
Used on porous surfaces with Emer-Seal PU 25 & Emer-Seal PU 40 if required.
Part ID DescrIPtIon
665228 PRIMER NO.21 250ML
Primer 10
Used on porous surfaces with Hilastic.
Part ID DescrIPtIon
665214 PRIMER NO.10 250ML
emer-Proof WB Primer
Economical, water based concrete and masonry primer.
USES
Emer-Proof WB Primer can be used as a primer/sealer coating on concrete, brick, tilt-up panels etc. Provides an even non absorbent substrate over which Emer-Proof 695 membrane systems can be applied.
Part ID DescrIPtIon
320030 EMER-PROOF WB PRIMER 5L
emer-Acrylic SeAler
Economical, water based concentrate and masonry primer.
USES
Emer-Acrylic Sealer can be used as a primer/sealer coating on concrete, brick, tilt-up panels etc. Provides an even non absorbent substrate over which Emer-impact, Emer-Clad membrane systems and Emer-Acrylic Low Sheen can be applied.
Part ID DescrIPtIon
561452 EMER-ACRYLIC SEALER 4L 561785 EMER-ACRYLIC SEALER 15L
emer-coAt cleAr SeAler
Penetrating, solvent based, clear masonry and concrete binder/sealer.
USES
As a primer, sealer coating on fibre cement, masonry, blockwork, brick or other masonry surfaces. Provides an excellent seal over aged, weathered paintwork and will penetrate powdery coatings such as “kalsomine” and “distemper”.
Part ID DescrIPtIon
561017 EMER-COAT CLEAR SEALER 1L 561018 EMER-COAT CLEAR SEALER 4L 561019 EMER-COAT CLEAR SEALER 20L
emer-Proof SBr Primer
SBR latex primer & waterproofing additive.
USES
Emer-Proof SBR Primer is a single component fast drying primer that provides excellent high bonding and penetrating properties into concrete and masonry surfaces. In addition to its priming properties (for Emer-Proof 250), Emer-Proof SBR Primer can also be used as a waterproofing additive for cement based products to enhance adhesion, water resistance and compressive strength.
Part ID DescrIPtIon
74326 0 EMER-PROOF SBR PRIMER
PRIMERS
PRIMERS / lIqUID aPPlIED MEMbRaNES
PrimerS
emer-Bond
Waterborne, anti-corrosive primer.
USES
For fabrication and maintenance work generally. Suitable as a shop primer due to its quick drying, outstanding adhesion, good resistance to corrosion and the absence of health and fire hazards. For application in special conditions, consult Parchem for detailed information.
Part ID DescrIPtIon
PRIMERS
PRIMERS / lIqUID aPPlIED MEMbRaNES
liquid APPlied memBrAneS
emer-clAd WAterProofing
Acrylic, flexible waterproofing membrane, for internal and UV exposed external areas - colour range available.
USES
Emer-Clad is suitable for application to many common substrates including concrete, fibrous cement products, metals, timber with priming required on most substrates.
Part ID DescrIPtIon
740040 EMER-CLAD MATT LIGHT GREY 4L 561723 EMER-CLAD MATT LIGHT GREY 15L 561724 EMER-CLAD MATT MID GREY 15L 561726 EMER-CLAD MATT SANDSTONE 15L 561720 EMER-CLAD MATT WHITE 15L 561770 EMER-CLAD MATT A BASE 15L 561765 EMER-CLAD MATT B BASE 15L 561760 EMER-CLAD MATT C BASE 15L 740015 EMER-CLAD MATT WHITE 4L 740045 EMER-CLAD MATT MID GREY 4L 561755 EMER-CLAD SATIN A BASE 15L 561750 EMER-CLAD SATIN B BASE 15L 561745 EMER-CLAD SATIN C BASE 15L 740205 EMER-CLAD SATIN WHITE 4L 561700 EMER-CLAD SATIN WHITE 15L 740220 EMER-CLAD SATIN LIGHT GREY 4L 561703 EMER-CLAD SATIN LIGHT GREY 15L 740225 EMER-CLAD SATIN MID GREY 4L 561704 EMER-CLAD SATIN MID GREY 15L 740245 EMER-CLAD SATIN SANDSTONE 4L 561706 EMER-CLAD SATIN SANDSTONE 15L 561722 eMer-cLaD Matt caLsIL WHIte 15L 561729 eMer-cLaD Matt creaM 15L 561728 eMer-cLaD Matt cUMBerLanD stone 15L 561727 eMer-cLaD Matt JasMIne 15L 561733 eMer-cLaD Matt LIGHt Green 15L 561702 eMer-cLaD satIn caLsIL WHIte 15L 561709 eMer-cLaD satIn creaM 15L 561708 eMer-cLaD satIn cUMBerLanD stone 15L 561707 eMer-cLaD satIn JasMIne 15L 561712 eMer-cLaD satIn LIGHt Green 15L 740220 eMer-cLaD satIn LIGHt GreY 4L 561704 eMer-cLaD satIn MID GreY 15L
emer-tAn
Tannin phosphate, rust-converter for corroding metal, pre-painting treatment.
USES
The versatility of Emer-Tan application makes it suitable for small or large surfaces, inaccessible areas or wherever rust is present. As a surface pre-treatment for rusted structural steel, machinery, gates, railings, marine fittings, motor vehicle floors and all rusted surfaces where the complete removal of rust is not feasible or economical.
Part ID DescrIPtIon
561610 EMER-TAN 5L 561607 EMER-TAN 20L
emer-gArd Primer tyPe 2
Quick drying anti-corrosive primer .
USES
Emer-Gard Primer Type 2 can be used for all new or old steel surfaces in industrial, commercial or domestic situations. Used where high durability is desired when only a minimum of surface preparation is possible, for practical, safety or reasons of economy.
Part ID DescrIPtIon
561176 EMER-GUARD PRIMER TYPE 2 4L 561177 EMER-GUARD PRIMER TYPE 2 20L
emer-imPAct
Decorative façade coating, water based, durable, flexible with full colour range.
USES
Emer-Impact is suitable for application to most common facade substrates including concrete render, flush jointed block and brickwork, fibre cement sheeting, tilt-up constructions and AAC blocks and panels after recommended primer/sealer application.
Part ID DescrIPtIon
561776 EMER-IMPACT A BASE 15L 561778 EMER-IMPACT B BASE 15L 561780 EMER-IMPACT C BASE 15L 561393 EMER-IMPACT TINTS 15L
emer-Acrylic loW Sheen
A High quality, water based acrylic, low sheen coating.
USES
Suitable for application to brickwork, cement render, concrete, blockwork, fibre cement sheeting, plaster board and pre-primed metals. As a general purpose, high opacity, durable protective, decorative coating mainly for exterior use, but also suited for interior surfaces.
Part ID DescrIPtIon
561394 EMER-ACRYLIC LOW SHEEN TINTS 15L
emer-PAtch (Smooth)
Smooth acrylic patching compound.
USES
For the repair of surface imperfections and defects in concrete and masonry surfaces.
Part ID DescrIPtIon
773003 EMER-PATCH SMOOTH 15L
lIqUID aPPlIED MEMbRaNES
SElf aDhESIvE / PRE-aPPlIED MEMbRaNES
emer-Proof 695
Water based fibre reinforced, flexible, fast drying, modified polyurethane, waterproofing membrane, for under tile internal and external areas.
USES
Emer-Proof 695 has been developed for waterproofing of internal and external under-tile applications. Such as shower recesses, bathrooms, laundries, and balconies or terrace areas.
Part ID DescrIPtIon
734051 EMER-PROOF 695 15L
emer-Proof 250
Polymer / cementitious two part waterproofing membrane.
USES
Emer-Proof 250 is suitable for a wide range of under tile waterproofing applications such as foundations, wet areas & showers, podiums, terraces, balconies & deck areas tiled pools & water features, water tanks and water storage areas, including potable conditions. Also is suitable for subterranean areas like retaining walls.
Part ID DescrIPtIon
743250 Emer-Proof 250 Part A 743255 Emer-Proof 250 Part B 15kg
emer-Proof 750
High performance, tough, flexible, polyurethane waterproofing membrane, for internal and external under tile areas.
USES
The high elasticity, excellent bond and low water permeability of Emer-Proof 750 make it ideal for a wide range of water/vapour proofing applications such as foundations, basements, tunnels, ground floors, suspended floors, roof terraces, balconies, patios, bridges, inspection pits, sewage works, inverted roofs, bathrooms and wet areas.
Part ID DescrIPtIon
734101 EMER-PROOF 750 GREY 15L 734102 EMER-PROOF 750-LV GREY 15L
emer-Proof AquA BArrier
Water borne epoxy membrane / barrier for porous surfaces.
USES
Emer-Proof Aqua Barrier is a grey, two-component, matt to semi-gloss epoxy coating. When applied at 200 microns dry film thickness will provide a tenaciously bonded coating controlling the transmission of liquid moisture.
Part ID DescrIPtIon
405015 GREY 20L KIT
emer-Proof ecoflex
High performance, single component, water based rubberised waterproofing membrane.
USES
Developed for the residential & commercial construction industry. It is solvent free, non-flammable, and forms a highly flexible monolithic waterproofing membrane.
Part ID DescrIPtIon
730730 EMER-PROOF ECOFLEX 20L
emer-clAd firecheck
Fire retardant protective coating for concrete and masonry surface.
USES
On timber and all types of building boards, ceiling tiles, panelling etc. Over polyurethane and styrene foam insulation, pipe lagging or similar it provides a fire retardant, abrasion resistant, flexible skin that also withstands weather and wear.
Part ID DescrIPtIon
561005 EMER-CLAD FIRECHECK WHITE 15L
emer-clAd ArchitecturAl
Decorative and protective façade coating, water based acrylic, highly durable, elastomeric, waterproofing membrane with full colour range.
USES
Emer-Clad is suitable for application to many common substrates including concrete, render, masonry, fibrous cement products, metals, timber and bituminous membranes. Some special priming may be required.
Part ID DescrIPtIon
lIqUID aPPlIED MEMbRaNES
SElf aDhESIvE / PRE-aPPlIED MEMbRaNES
emer-Proof eJB tAPe
Superior sealing system for critical areas over traditional bondbreaking sealants and tapes.
USES
Emer-Proof EJB Tape has been developed as a superior alternative to traditional bond breaking methods for sealing critical movement zones. Emer-Proof EJB Tape is suitable for internal, external underground and fully immersed applications.
Part ID DescrIPtIon
743265 EMER-PROOF EJB TAPE 743270 EMER-PROOF EJB TAPE INTERNAL CORNERS 743275 EMER-PROOF EJB TAPE EXTERNAL CORNERS
PolyfAB ld 7230W
Part ID DescrIPtIon
771193 POLYFAB LD 7230W 1.27X1M
SontArA tAPe
Non woven reinforcement fabric.
USES
Sontara Reinforcement Fabric is a non woven fabric designed for use with liquid membrane and high build coating products for enhancing reinforcement, tensile strength and uniform layers in liquid membrane applications.
Part ID DescrIPtIon
771086 SONTARA TAPE 100MMX100M ROLL 771087 SONTARA TAPE 150MM X 100M ROLL 771088 SONTARA TAPE 200MMX100M ROLL 771089 SONTARA TAPE 300MMX100M ROLL 771090 SONTARA TAPE 1M X 100M ROLL
emer-Proof hdPe
Self adhesive bituminous membrane incorporating a cross laminated HDP film that provides the product excellent physical & application properties.
USES
Emer-Proof HDPE is used to waterproof foundations, basements, roofs, retaining walls and tunnels, box culverts and planter boxes.
Part ID DescrIPtIon
742034 1M X 20M ROLL
emer-Proof hd
Self adhesive bituminous membrane incorporating a polypropylene mesh for added strength and heat stability.
USES
Emer-Proof HD is used to waterproof bridge decks, ramps, car parks, and road pavements where the membrane will be overlaid with hot asphalt.
Part ID DescrIPtIon
742038 1M X 20M ROLL
Proofex engAge
Pre-applied waterproofing membrane which mechanically bonds to poured concrete.
USES
Proofex Engage is a unique patented waterproofing membrane for a range of waterproofing applications including basements and substructures. It provides water vapour and gas protection to water excluding structures and protects concrete from aggressive ground salts and chemicals.
Part ID DescrIPtIon
707070 1.27 X 30M ROLL
Proofex detAilS
Part ID DescrIPtIon
707071 PROOFEX DETAIL STRIP 10M 707072 PROOFEX EXT CORNER (200X200X200MM) 707073 PROOFEX INT CORNER (200X200X200MM) 707077 PROOFEX L SECTION 10M 707075 PROOFEX LM 28KG
tileBond flex
Rubber modified, flexible, off-white, cement based, ceramic tile adhesive for use with Emer-Proof 680.
USES
Tilebond Flex can be used both internal / external on walls and floors. It can be used to bond a variety of different tiles to a variety of different substrates. It is fast setting, meaning you can commence grouting 6-8 hours @ 20OC after
completion of tiling.
Part ID DescrIPtIon
307001 EMER-PROOF TILEBOND FLEX 20KG
tile AdheSive
emer-Proof Self AdheSive Primer
High tack primer for Emer-Proof HDPE and HD.
Part ID DescrIPtIon
742041 EMER-PROOF SELF ADHESIVE PRIMER 20L
liquid APPlied AcceSSorieS
Pre-APPlied memBrAne &
AcceSSorieS
PlAStic
Part ID DescrIPtIon
GD-FILMO450200 PLASTIC HIGH IMPACT ORANGE 2MX4M GD-FILMHI PLASTIC HIGH IMPACT BLACK 2MX4M
GD-FILM PLASTIC MEDIUM IMPACT BLACK 2MX4M
lIqUID / TORCh aPPlIED aCCESSORIES
TORCh aPPlIED MEMbRaNES
imPrABoArd
Polyethylene coreflute board for low duty membrane protection.
Part ID DescrIPtIon
771079 IMPRABOARD 1830 X 1220
emer-Proof drAin v
Dimpled protection and drainage membrane in high-density extruded polyethylene with continuous filament yarn.
USES
Emer-Proof Drain V is ideal for the protection of foundations and is perfect for “dry” roof gardens, as it replaces the traditional aggregate draining layer and speeds up the work, making it less expensive and reducing both the weight and thickness of the roof garden.
Part ID DescrIPtIon
743072 EMER-PROOF DRAIN V 2M X 20M ROLL
index Bitumen Primer
Bitumen primer for all torch applied Index membranes.
Part ID DescrIPtIon
742105 INDEX BITUMEN PRIMER 20L
gAS torch
For use with torch on membranes.
Part ID DescrIPtIon
742082 SMALL GAS TORCH, INCLUDING HOSE AND REGULATOR
742092 LARGE GAS TORCH, INCLUDING HOSE AND REGULATOR
771196 GAS TORCH HEAD LARGE 771195 GAS TORCH HEAD SMALL 771207 GAS TORCH STEM LONG 480MM 771206 GAS TORCH STEM SHORT 220MM
hdPe roller
970mm long pipe for rolling membranes out
Part ID DescrIPtIon
771200 HDPE ROLLER
index minerAl chiPS
Part ID DescrIPtIon
771202 INDEX MINERAL CHIPS GREEN 5KG 771201 INDEX MINERAL CHIPS GREY 5KG
PreSSure SeAl flAShing
Aluminium strips for sealing and flashing the edge of index sheet membranes.
USES
Parchem Pressure Seal Flashing is used to seal and flash the edge of Index membranes.
Part ID DescrIPtIon
752016 PRESSURE SEAL FLASHING 3M LENGTHS
helASto-ring
Plastic support ring for concrete pavers with leveling adjustment.
Part ID DescrIPtIon
771197 HELASTORING 771198 HELASTORING LEVELLER
one WAy ventS
Vapour relief roof vents for Index bituminous membranes.
USES
Vapour relief vents are used in conjunction with Index venting base sheet layers in a multi layer bituminious roof membrane system.
Part ID DescrIPtIon
771183 ONE WAY VENTS
SuPer non-return PiPe union
Roof outlets for torch on.
Part ID DescrIPtIon
771192 SUPER NON-RETURN PIPE UNION 100MM 771191 SUPER NON-RETURN PIPE UNION 90MM
lIqUID / TORCh aPPlIED aCCESSORIES
TORCh aPPlIED MEMbRaNES
torch APPlied memBrAneS
rollBASe
Polyester fabric backed base sheet, for heat sensitive substrates, in multi-layer torch-on membrane systems.
USES
Rollbase is particularly suited as a base sheet for heat sensitive substrates in multi-layer torch applied bitumenLose laid, mechanically fastened, fully or part adhered with Adhesive A901 (general purpose contact adhesive), hot asphalt roll & pour method membrane systems.
Part ID DescrIPtIon
742010 1M X 10M ROLL
vAPordiffuSer
Elastoplastomeric membrane with deep bitumen underside rivets, to allow water vapour to diffuse and provided waterproofing in the base layer in multi-layer systems.
USES
Vapordiffuser is used for both new construction and renovation work, on damp surfaces where blisters can form in the waterproof layer. It can be installed as a visible layer directly on concrete or to renovate an old bituminous layer which is no longer waterproof.
Part ID DescrIPtIon
742030 1M X 7.5M ROLL
Argo P
3 mm thick, plastomeric, torch-applied, reinforced with polyester and stabilised with fibre glass matt membrane, for single or multi layer systems.
USES
Argo P is used as a continuous waterproofing membrane for foundations, basements, tunnels, roofs, etc, as an economical single layer membrane or as the base layer in multi-layer systems.
Part ID DescrIPtIon
742230 ARGO P 3MM
fidiA
3 mm thick elastomeric, torch applied, reinforced with rot-proof non-woven polyester stabilised with glass matt, membrane. Used for single or multi layer systems.
USES
Fidia polyester is used as a continuous waterproofing membrane for foundations, basements, tunnels, roofs etc.
Part ID DescrIPtIon
742000 3MM 1M X 10M ROLL
PerfoBASe
Perforated reinforced base sheet, to relieve water vapour pressure, from under multi-layer torch-on membrane systems.
USES
Perfobase is used for spot bonding membranes with a torch. It should be used as a first connecting layer to avoid the formation of blisters in waterproofing membrane applied on concrete which will remain visible to the eye.
Part ID DescrIPtIon
742020 1M X 30M ROLL
modo/P
3.5 mm thick, elastoplastomeric, torch-applied, reinforced with polyester and stabilised with fibre glass matt membrane, for single or multi layer systems.
USES
Modo/P has been specifically designed for the
waterproofing of foundations, basements, tunnels, terraces and roofs as a single layer or in a multi-layer system.
Part ID DescrIPtIon
742015 3.5MM 1 X 10M ROLL
teStudo
4 mm thick, elastomeric, torch-applied, reinforced with rot-proof non-woven single strand spunbond polyester fabric, membrane. Used in single or multi layer systems.
USES
Testudo is used as a continuous waterproofing membrane for foundations, basements, tunnels, roofs etc. Testudo Mineral may be used as the top layer in a two layer membrane system or as a single roof membrane.
Part ID DescrIPtIon
742040 4MM 1M X 10M ROLL 742070 MINERAL GREEN 4.5KG 1M X 10M ROLL 742060 MINERAL GREY 4.5KG 1M X 10M ROLL
fidiA minerAl grey
Fidia Mineral may be used as the top layer in a two layer membrane system or as a single roof membrane for both new and renovation work.
USES
Fidia Mineral may be used as the top layer in a two layer membrane system or as a single roof membrane for both new and renovation work.
Part ID DescrIPtIon
742004 FIDIA MINERAL GREY 4.5KG
defend h Anti-root
4 mm thick, elastomeric, torch-applied, plant root repellent, reinforced with rot-proof single strand spunbound non-woven polyester fabric, membrane.
USES
Defend H is always applied as the last waterproofing layer in contact with the earth for gardens, foundations, underground garages and tunnels covered with soil, road structures and roofs under gravel etc.
Part ID DescrIPtIon
TORCh aPPlIED MEMbRaNES / CEMENTITIOUS MEMbRaNES
CEMENTITIOUS MEMbRaNES / aDhESIvES / SEalaNTS
cementitiouS memBrAneS
vAndex BB75-Z
Surface applied, cement based render, waterproofing barrier for positive and negative water pressure applications.
USES
Vandex BB75-Z is a cementitious membrane and does not rely on crystal growth to achieve its waterproofing. As a result, BB75-Z can be used on most masonry surfaces, including sandstone, provided that the surfaces are adequately prepared.
Part ID DescrIPtIon
751005 VANDEX BB75-Z 25KG
vAndex concrete grey
Concrete capillary penetrating, crystal growth sealing, cement based, waterproofing system for positive and negative water pressure applications.
USES
Vandex Concrete Grey can be applied to either the pressure or non-pressure faces of concrete and is excellent for solving the problem of water seepage through porous or cracked concrete in both new and old structures.
Part ID DescrIPtIon
751011 VANDEX CONCRETE GREY 25KG
vAndex cemelASt
Flexible, surface applied, cement based render, waterproofing barrier for positive and negative water pressure applications.
USES
Vandex Cemelast is excellent for solving the problem of water seepage through concrete and masonry where live cracks are present in both new and old structures.
Part ID DescrIPtIon
751009 VANDEX CEMELAST 9KG
vAndex Plug
Rapid setting, permanent plugging of water seepage through porous concrete and fast flowing water through cracks and construction joints in concrete and masonry.
USES
Applications include plugging in-situ and precast concrete segments in tunnels, water storage tanks, sewerage mains and processing tanks, basements, below ground car parks, access chambers, building foundations and mines.
Part ID DescrIPtIon
751006 VANDEX PLUG 15KG
vAndex BB75e-Z
High performance, crack accommodating, surface applied, cement based render, waterproofing barrier for positive and negative water pressure applications.
USES
Vandex BB75E-Z is ideal in applications where the high pressure face is not easily accessible. It is also ideal for waterproofing the inside face of swimming pools, sewerage processing tanks, concrete block walls and any masonry surface where crystal growth waterproofing will not be effective due to a lack of alkalinity in the substrate.
Part ID DescrIPtIon
751003 VANDEX ELASTICIZER PK75 10KG PAK
teStudo 30
Torch applied 5 mm thick high performance reinforced elastoplastomeric polymer waterproofing membrane.
USES
Testudo 30 membrane is characterised by a high resistance to puncture and is therefore particularly suitable for single layer waterproofing systems where high mechanical resistance is required.
Part ID DescrIPtIon
742046 5MM 1 X 10M ROLL
Autotene BASe P
Thermally self adhesive 3 mm thick waterproofing base sheet membrane.
USES
A waterproofing membrane which consists of distilled bitumen for industrial use, with a high content of elastomeric and plastomeric polymers.
Part ID DescrIPtIon
742011 BASE SELF ADH. WATERPROOFING
ProteAduo P
High performance 4 mm thick torch applied waterproofing membrane with multilayer composite polymer bitumen and reinforcement
USES
Proteaduo/P has been developed as a waterproofing membrane where high mechanical resistance, elasticity, thermal stability and durability is required.
Part ID DescrIPtIon
emer-SeAl Pu25
High performance, flexible, one component, polyurethane joint sealant.
USES
Sealing joints in concrete panels, fibrous cement products, external cladding panels, blockwork and brickwork. Also in sealing joints around aluminium and timber door and window frames and between metal. Also suitable for sealing sawn joints up to 10 mm wide in concrete floors and pavements.
Part ID DescrIPtIon 620555 EMER-SEAL PU 25 BEIGE 600ML (20/CTN) 620545 EMER-SEAL PU 25 BLACK 600ML (20/CTN) 620525 EMER-SEAL PU 25 CONC.GREY 600ML (20/CTN) 620560 EMER-SEAL PU 25 DRIFTWOOD 600ML(20/CTN) 620535 EMER-SEAL PU 25 SANDSTONE 600ML (20/CTN) 620530 EMER-SEAL PU 25 WHITE 600ML (20/CTN)
emer-SeAl mS
One part elastomeric high performance paintable sealant.
USES
Sealing joints in concrete panels, marble, granite blockwork and brickwork. And also for use in sealing joints around aluminium and timber door and window frames and between metal and some plastics.
Part ID DescrIPtIon
620515 EMER-SEAL MS GREY 600ML SAUSAGE
TORCh aPPlIED MEMbRaNES / CEMENTITIOUS MEMbRaNES
CEMENTITIOUS MEMbRaNES / aDhESIvES / SEalaNTS
vAndex uni-mortAr 1-Z
Cement based reprofiling and waterproofing repair mortar - 6mm to 12mm thickness.
USES
Vandex Uni Mortar 1-Z is a surface applied, waterproof cementitious mortar for reprofiling concrete and masonry which does not rely on crystal growth to achieve its waterproofing. As a result, Vandex Uni Mortar 1-Z can be used on most masonry surfaces, including sandstone, provided that the surfaces are adequately prepared.
Part ID DescrIPtIon
751008 VANDEX UNI MORTAR 1-Z 25KG
vAndex BruSheS
For applying Vandex Concrete Grey slurry.
Part ID DescrIPtIon
751015 VANDEX BRUSHES SHORT HANDLE
vAndex conStruction Joint
tAPe
Waterproof joint bandage for moving joints. Used with Vandex BB75E-Z or Cemelast.
Part ID DescrIPtIon
751010 VANDEX CONSTRUCTION JOINT TAPE
conStruction AdheSiveS
General purpose, high strength, gap-filling adhesive suitable for bonding a wide range of common building materials.
Part ID DescrIPtIon
900083 300ML (10/CTN) CARTRIDGE
AdheSiveS
AdheSive A901
General purpose brush applied contact adhesive.
USES
Adhesive A901 is a general purpose brush applied contact adhesives. Based on polychloroprene, Adhesive A901 is formulated for fast, efficient bonding of decorative laminates to timber substrates.
Part ID DescrIPtIon
900006 ADHESIVE A901 20L
AdheSive A922
Pressure sensitive / contact adhesive for bonding polystyrene foam.
USES
Adhesive A922 is specifically formulated for the bonding of polystyrene foam to various substrates. Also suitable for bonding many plastics to various materials.
Part ID DescrIPtIon
900024 ADHESIVE A922 20L
SeAlAntS rAnge
emer-SeAl Pu40
Tough, abrasion resistant, one-component, polyurethane joint sealant, trafficable.
USES
For bonding or sealing joints between most construction materials, where a high bond strength is required.
Part ID DescrIPtIon
SEalaNTS
CONCRETE JOINTINg / waTERSTOPS / CONCRETE REPaIR
PlAStiSeAl
Rubberised bitumen, mastic joint sealant compatible with bitumen based membranes.
USES
For sealing joints in retaining walls, roofing (sealing horizontal chases, flashings, gutterings and sheet laps), sealing terminations of bitumen based waterproofing membranes.
Part ID DescrIPtIon
600222 PLASTISEAL 600ML
emer-SeAl cr
Highly chemical resistant, fast cure, durable, one component joint sealant.
USES
For sealing expansion and construction joints exposed to aggressive chemical environments.
Part ID DescrIPtIon
610501 EMER-SEAL CR CONCRETE GREY 600ML
emer-SeAl roAdSeAl
High performance, low modulus, high joint movement accommodation, one component silicone rubber joint sealant.
USES
For sealing joints in concrete roads, runways, carparks and pavements.
Part ID DescrIPtIon
610402 EMER-SEAL ROADSEAL CONCRETE GREY 600ML
flAmex Pu
Fire rated, high performance, flexible, one component, polyurethane sealant for external and internal applications.
USES
Flamex PU is designed for sealing exterior and interior movement joints where a fire rating of up to 4 hours is required.
Part ID DescrIPtIon
620035 FLAMEX PU CONCRETE GREY 600ML
hilAStic 44
Flexible, one-component, acetoxy cure silicone sealant for glass, ceramics, aluminium.
USES
For sealing joints in glass and window construction, aquariums and display cases, general bonding, sealing and insulation.
Part ID DescrIPtIon
610302 HILASTIC 44 TRANS 300G (20/CTN)
hilAStic 66
Mould and fungus resistant, flexible, one-component silicone rubber sealant for bathrooms & kitchens.
USES
Hilastic 66 is a one-component, non-acid, gun applied silicone rubber sealant which cures rapidly to form a durable, watertight seal.
Part ID DescrIPtIon
610321 HILASTIC 66 WHITE 300G (20/CTN)
lexel
Clear, all purpose gap sealant for interior and exterior use.
USES
The high clarity of Lexel (up to 19 times clearer than translucent silicone sealants) make it ideal for a wide range of gap filling and joint sealing applications where a high clarity sealant is required. Uses include, trim, countertops, splashbacks, sinks, tile thresholds, windows, doors, eaves, roof tiles, guttering, vents, ductwork, flashings and skylights.
Part ID DescrIPtIon
810115 LEXEL CLEAR ALL PURPOSE 270G (12/CTN)
hilAStic 88
Neutral cure, one-component silicone sealant, for sheet metal lap joint, gutters, downpipes, etc.
USES
Sealing joints in roof and wall sheets, guttering and downpipes, sheet metal water tanks, caravans, annexes and composite structures, suitable for use with laminated glass (nonstructural applications) and timber such as in window manufacture.
Part ID DescrIPtIon
610332 HILASTIC 88 TRANS 300G (20/CTN) 610333 HILASTIC 88 CONCRETE GREY 300G (20/CTN) 610334 HILASTIC 88 BLACK 300G (20/CTN) 610335 HILASTIC 88 WHITE 300G (20/CTN)
emer-SeAl conStruction
Silicone hm
Tough, pick and abrasion resistant, one-component silicone sealant / adhesive for civil and industrial applications.
USES
For bonding or sealing joints between most construction materials, where a high bond strength is required.
Part ID Description
610375 EMER-SEAL CON SILICONE HM CON.GREY 600ML
cAulking gunS
Part ID DescrIPtIon
ARW055 CAULKING GUN 380MM DW-DC547-KIT CAULKING GUN DEWALT CORDLESS (KIT) DW-DC547-XE CAULKING GUN DEWALT CORDLESS (SKIN)
PAveroc
Floor / pavement large area, repair mortar (15-50 mm depth).
USES
Paveroc is used for the reinstatement of large areas of concrete pavements and floors to avoid the total replacement of bays.
Part ID supply (kg)
402080 20
SEalaNTS
CONCRETE JOINTINg / waTERSTOPS / CONCRETE REPaIR
PolyStyrene
Lightweight, versatile material used for a wide variety of applications in the construction industry.
USES
Polystyrene is an economical, compressible filler. It is supplied in sheet form as well as various cut profiles in most shapes and sizes.
Available in sheets, blockouts and cylinders.
Part ID DescrIPtIon 2201090 POLYSTYRENE 2.4M X 1.2M X 10MM/EA 2201095 POLYSTYRENE 2.4M X 1.2M X 20MM/EA 2201100 POLYSTYRENE 2.4M X 1.2M X 50MM/EA 2201085 POLYSTYRENE 2.4M X 1.2M X 100MM/EA
leAkmASter
Gun applied, water-swellable, waterstop paste
Part ID Description
2200785 LEAKMASTER / 320ML CARTRIDGE
hydrotite
Premium grade, water swellable, waterstop range for use in cast in-situ concrete.
Part ID Description
2200560 HYDROTITE DSS0220 ADH BACK /LM 2200550 HYDROTITE CJ0725-3K ADH / LM 2200555 HYDROTITE CJ1020-2K ADH /LM
Pvc WAterStoPS
Centrally and externally placed, pvc waterstop profiles for use in cast in-situ concrete.
Part ID Description 720301 SUPERCAST H/F 150MMX15M ROLL 720302 SUPERCAST H/F 200MMX15M ROLL 720303 SUPERCAST H/F 250MMX12M ROLL 720330 SUPERCAST R/G 'R' 150MMX12M ROLL 720340 SUPERCAST R/G 'R' 200MMX12M ROLL 720350 SUPERCAST R/G ‘S’ 250MMX12M ROLL 720360 SUPERCAST R/G ‘R’ 250MMX12M ROLL
exPAndAfoAm BAcking rod
Medium density, closed cell polyethylene backing rod range.
USES
Expandafoam is a closed cell polyethylene foam rod supplied in circular section cords of varying diameters. Expandafoam is primarily used in expansion joints but is also suitable for use in any joint system requiring a readily compressible joint filler containing no migratory chemicals which could adversely affect joint sealants.
Part ID DescrIPtIon
665120 EXPANDAFOAM ROD 6MMX250M ROLL 665121 EXPANDAFOAM ROD 10MMX250M ROLL 665122 EXPANDAFOAM ROD 13MMX100M ROLL 665123 EXPANDAFOAM ROD 15MMX100M ROLL 665124 EXPANDAFOAM ROD 20MMX60M ROLL 665125 EXPANDAFOAM ROD 25MMX50M ROLL 665126 EXPANDAFOAM ROD 30MMX50M ROLL 665127 EXPANDAFOAM ROD 40MMX2M STRIP 665128 EXPANDAFOAM ROD 50MMX2M STRIP
emer-SeAl BAcking rod
Economical, low density, open cell, polyurethane, sealant backing rod range.
USES
Time saving – its flexibility, elasticity and round shape allows quick, efficient placement into both even and uneven joints. It can be stretched, squeezed or bent to conform to irregular surfaces. One size of diameter foam can be used in a range of joint sizes.
Optimal sealant curing – open cell construction allows air to reach both sides of the sealant, ensuring uniform curing.
Part ID DescrIPtIon
665200 EMER-SEAL BACKING ROD 16MM X 150M ROLL 665201 EMER-SEAL BACKING ROD 22MMX100M ROLL 665202 EMER-SEAL BACKING ROD 29MMX60M ROLL 665203 EMER-SEAL BACKING ROD 38MMX30M ROLL 665204 EMER-SEAL BACKING ROD 50MMX20M ROLL
renderoc hB
General purpose, economical, patch repair mortar, polymer modified.
USES
For the reinstatement of large areas of concrete and for small, localised patch repairs. Renderoc HB will protect embedded steel reinforcement. It is specifically designed for vertical and overhead high-build applications.
Part ID DescrIPtIon
306095 RENDEROC HB 15KG
nitomortAr AP
General purpose adhesive paste that will bond and fill to most building materials and form an impervious barrier to water.
USES
For speedy and permanent patching repairs to concrete structures; bonding of precast concrete components and repair work to cementitious substrates.
Part ID DescrIPtIon
620460 NITOMORTAR AP 3LT PAK 620463 NITOMORTAR AP BASE 15L PAK 620464 NITOMORTAR AP HARDENER 15L PAK
durAfloor level Prime
Concentrated, high performance primer for cementitious underlays.
USES
Durafloor Level Prime is the recommended primer for the Cemptop XD, GP Advanced, Durafloor Leveltop, Leveltop Rapid and Levelbase.
Part ID DescrIPtIon
480005 DURAFLOOR LEVEL PRIME 1L 480017 DURAFLOOR LEVEL PRIME 20L 480016 DURAFLOOR LEVEL PRIME 5L
cemtoP gP AdvAnced
High performance floor underlay, self smoothing, levelling mortar for carpet / tiles (2-50 mm thickness) with enhanced flow properties for fast and easy application.
USES
Cemtop GP Advanced is designed as a heavy duty underlay which forms a smooth, hard surface for a variety of floor finishes including carpet and ceramic tiles.
Part ID DescrIPtIon
430088 CEMTOP GP ADVANCED 18KG
durAfloor leveltoP rAPid
Floor underlay, trowellable, rapid-set, levelling mortar for carpet / tiles / vinyl (0-50 mm thickness).
USES
Durafloor Leveltop Rapid is designed as a heavy duty floor repair compound which provides a very smooth surface allowing the smooth installation of carpet, ceramic tiles sheet rubber, sheet vinyl and vinyl tiles.
Part ID DescrIPtIon
430105 DURAFLOOR LEVELTOP RAPID 20KG
durAfloor levelBASe
Floor underlay, economical sub-base build mortar (up to 200 mm thickness).
USES
Durafloor Levelbase is designed as a heavy duty sub-base underlay which forms a smooth, hard surface to be used under Durafloor Leveltop and Fosroc Cemtop GP Advanced & XD where deep sections are required.
Part ID supply (kg)
430095 20
INDUSTRIal flOORINg
TOOlS & EqUIPMENT
nitoBond SBr
Water resistant polymer additive, to provide good adhesion to concrete.
USES
For floor levelling prior to membranes being applied. For improving and bonding concrete repair mortars, cementitious floor toppings and screeds, waterproof renders and cementitious slurries. Part ID DescrIPtIon 323105 NITOBOND SBR 20L 323115 NITOBOND SBR 200L
induStriAl flooring
durAfloor tc PluS
Trafficable Coating System
USES
To provide a hard wearing surface, reduce noise and improve the appearance of multi-storey car park floors and other trafficable areas in both new construction and refurbishment projects. Available as an external waterproof system for exposed car park decks and a wearing coat system for intermediate car park levels, basements and other internal trafficable areas.
Part ID Description
405750 PRIMER BASE 10KG KIT 405751 PRIMER HARD 10KG KIT 405752 MEMBRANE BASE KIT 15KG 405753 MEMBRANE HARD KIT 15KG 405754 BODY COAT BASE 20KG KIT 405755 BODY COAT HARD 20KG KIT 405756 T/COAT MED GRY BASE 10 405757 T/COAT ALL COLOUR HARD 405758 T/COAT SP COLOUR BASE
INDUSTRIal flOORINg
TOOlS & EqUIPMENT
Part ID Description
MH-FS150 FLOOR SCRAPER - 150MM HEAVY DUTY - ORANGE MH-FS200 FLOOR SCRAPER - 200MM HEAVY DUTY - ORANGE MH-FS300 FLOOR SCRAPER - 300MM HEAVY DUTY - ORANGE MH-FS150SB APARE BLADE - SUIT 150MM SCRAPER MH-FS200SB SPARE BLADE - SUIT 200MM SCRAPER MH-FS300SB SPARE BLADE - SUIT 300MM SCRAPER MH-HDFS200 HEAVY DUTY FLOOR SCRAPER - 200MM MH-HDFS200SB HEAVY DUTY FLOOR SCRAPER - 200MM - SPARE BLADE
floor ScrAPerS
MH-FS150 MH-FS200 MH-FS300 MH-HDFS200
Part ID Description
MH-MHRB30H BRICK SIZE - 200 X 90 X 38MM - COARSE - RED HANDLE - 30 GRIT MH-MHRB60H BRICK SIZE - 154 X 77 X 25MM - MEDIUM - RED HANDLE - 60 GRIT
concrete ruBBing BrickS
MH-MHRB30H MH-MHRB60H
Part ID Description
MH-RD REEL DEAL - ALL ALLOY CONSTRUCTION MH-WB WORK BELT - 50MM WIDE - OIL TANNED BROWN LEATHER
tie Wire reel diSPenSer - All Alloy
MH-RD MH-WB
Part ID Description
MH-CWT WIRE TWISTER - SPIRAL DRIVE TYPE MH-WTT WIRE TWISTER - HAND TWIST - ABS MATERIAL
Wire tWiSterS
MH-CWT MH-WTT
Part ID Description
MH-238F CLUB HAMMER - 3LB - FIBREGLASS HANDLE
cluB/mASh hAmmerS
Part ID Description
MH-DH4F DEMOLITION HAMMER - 4LB - 400MM F/G HANDLE MH-DEMO4 DEMO HAMMER - 4LB - 380MM F/G HANDLE MH-SLEDGE6 SLEDGE HAMMER - 6LB - 450MM HICKORY HANDLE
demolition hAmmerS
MH-DH4F
MH-SLEDGE6
Part ID Description
MH-FH20 CLAW HAMMER - FULLY FORGED 20oz - COMFORT GRIP MH-FG20 CLAW HAMMER - 20OZ - FIBREGLASS HANDLE - BUDGET
clAW hAmmerS
Part ID Description
MH-SLEDGE6 SLEDGE HAMMER - 6LB - 450MM WOOD HANDLE - HICKORY MH-SLEDGE8 SLEDGE HAMMER - 8LB - 900MM WOOD HANDLE - HICKORY MH-SLEDGE10 SLEDGE HAMMER - 10LB - 900MM WOOD HANDLE - HICKORY MH-SLEDGE12 SLEDGE HAMMER - 12LB - 900MM WOOD HANDLE - HICKORY
Part ID Description
MH-MALLET24 FIBREGLASS HANDLE MALLET - WHITE HEAD NON-MARKING
mAllet - fiBreglASS hAndle
Sledge hAmmerS - hickory hAndle
MH-SLEDGE6 MH-SLEDGE8
Part ID Description
MH-M2818 WRECKING BAR 450MM - 18IN MH-M2824 WRECKING BAR 600MM - 24IN MH-M2830 WRECKING BAR 750MM - 30IN MH-M2836 WRECKING BAR 900MM - 36IN
Wrecking BArS
MH-M2824
Part ID Description
MH-M3362 SPUD BAR - 1.8M X 25MM - HEX MH-M3368 SPUD BAR - 1.8M X 30MM - HEX
SPud (fencing) BArS - chiSel & knoB
Part ID Description
MH-M3410 CROW BAR - 1.8M X 25MM - CHISEL AND POINT
croW BAr - chiSel & Point
Part ID Description
MH-MPB-56 WAREHOUSE LOADING BAR - 1500MM X 30MM
Pry BAr
Part ID Description
MH-EN200 200MM END CUTTING NIPPERS MH-EN280 280MM END CUTTING NIPPERS
end cutting niPPerS
MH-EN200 MH-EN280
Part ID Description
MH-RCB ROD CUTTER AND BENDER - 16MM CAPACITY
rod cutter & Bender
Part ID Description
MH-PB BLACK RUBBER BUCKET - 12 LITRE - HEAVY DUTY MH-J40 BLACK BUILDERS BUCKET - 40 LITRE WITH TWO HANDLES
BuilderS BucketS
Part ID Description
MH-EL10 EXTENSION LEAD - 10M - 15 AMP LEAD/10 AMP PLUG MH-EL15 EXTENSION LEAD - 15M - 15 AMP LEAD/10 AMP PLUG MH-EL30 EXTENSION LEAD - 30M - 15 AMP LEAD/10 AMP PLUG
heAvy duty electricAl leAdS
Part ID Description
MH-HS16 HARD POINT - 400MM
hAndSAW
Part ID Description
MH-JS JUMBO SPONGE - 200 X 125 X 75MM MH-JS2 KIDNEY SHAPE SEA SPONGE 290 X 170 X 75MM - XLARGE MH-JS3 JUMBO SPOMGE - 300 X 200 X 100MM TILERS TYPE
SPongeS
Part ID Description
MH-MHSS STAINLESS STEEL SCISSORS - COMFORT GRIP
SciSSorS
Part ID Description
MH-RT349 SNAP BLADE KNIFE - 18MM - AUTO LOCK
SnAP BlAde knife
Part ID Description MH-PB25 PAINT BRUSH - 25MM MH-PB40 PAINT BRUSH - 40MM MH-PB50 PAINT BRUSH - 50MM MH-PB75 PAINT BRUSH - 75MM MH-PB100 PAINT BRUSH - 100MM
PAint BruSheS
Part ID DescriptionMH-PSC25 PAINT SCRAPER - WOOD HANDLE - 25MM MH-PSC38 PAINT SCRAPER - WOOD HANDLE - 38MM MH-PSC50 PAINT SCRAPER - WOOD HANDLE - 50MM MH-PSC75 PAINT SCRAPER - WOOD HANDLE - 75MM MH-PSC100 PAINT SCRAPER - WOOD HANDLE - 100MM MH-PSC125 PAINT SCRAPER - WOOD HANDLE - 125MM
PAint ScrAPerS
Part ID Description MH-CT15036 150MM X 3.6MM - BLACK UV - PACK 100PCS MH-CT20048 200MM X 4.8MM - BLACK UV - PACK 100PCS MH-CT25048 250MM X 4.8MM - BLACK UV - PACK 100PCS MH-CT30048 300MM X 4.8MM - BLACK UV - PACK 100PCS. MH-CT37048 370MM X 4.8MM - BLACK UV - PACK 100PCS MH-CT45080 450MM X 8.0MM - BLACK UV - PACK 100PCS MH-CT55080 550MM X 8.0MM - BLACK UV - PACK 100PCScABle tieS - uv StABAliSed
Part ID Description
MH-MR ALLOY LANDSCAPE 36 TOOTH RAKE 915MM WIDE - F/G HANDLE
rAkeS
Part ID Description
MH-GT12 6LB ROAD PICK - HEAD ONLY - CHISEL AND POINT MH-TH5 5LB MADDOCK HEAD - CUTTER END
PickS & mAddockS
TOOlS & EqUIPMENT
TOOlS & EqUIPMENT
Part ID Description
MH-840 ROAD PICK/MADDOCK HANDLE - TIMBER - 900MM MH-840FG ROAD PICK/MADDOCK HANDLE - FIBREGLASS - 900MM
MH-U155 BROOM HANDLE - 1500 X 25MM
rePlAcement hAndleS
Part ID Description
MH-28600 HI GENIE HARD POLY FILL BROOM - 600MM MH-27600 HI GENIE MEDIUM POLY FILL BROOM - 600MM
MH-28600
MH-27600 HANDLE TO SUIT - MH-U155
BroomS
Part ID Description
MH-BL526 JUMBO UTILITY BRUSH - TAMPICO FIBRE - RED HANDLE
JumBo utility BruSh
Part ID Description
MH-34049 DAIRY SCRUB - POLY FILL - STIFF BRISTLE
dAiry ScruB
Part ID Description
MH-BL119 ACID BRUSH - PLASTIC STOCK NYLON FIBRE FILL
Brick Acid BruSheS
Part ID Description
MH-BL230 SQUEEGIE ALUMINIUM FRAME - 450MM MH-BL247 SQUEEGIE ALUMINIUM FRAME - 600MM MH-BL254 SQUEEGIE ALUMINIUM FRAME - 900MM
SqueegieS - neoPrene ruBBer
Part ID Description
MH-8-100MFY BRAIDED BRICKIES LINE - NO 8 X 100M FLURO YELLOW MH-8-100MFP BRAIDED BRICKIES LINE - NO 8 X 100M FLURO PINK MH-12-100MFY BRAIDED BRICKIES LINE - NO 12 X 100M FLURO YELLOW MH-12-100MFP BRAIDED BRICKIES LINE - NO 12 X 100M FLURO PINK MH-12-500MFY BRAIDED BRICKIES LINE - NO 12 X 500M FLURO YELLOW
Brick line - fluro
For use with handle fh0076
Part ID Description
MH-258 BRICK CARRIER - CAD PLATED
Brick cArrier
Part ID Description
TOOlS & EqUIPMENT
TOOlS & EqUIPMENT
SPiked roller
Part ID Description
SA6037 9+ Frame ACH081 18+ Frame
PAint roller frAme
Part ID Description
MH-PR2 230MM PAINT ROLLER FRAME - MEDIUM DUTY MH-PR3 230MM PAINT ROLLER FRAME - HEAVY DUTY
roller coverS
Part ID Description
MH-RC938 ROLLER COVER - 10MM NAP - 230MM SA6001 ROLLER COVER 460mm FINE TEXTURE SA6002 ROLLER COVER 270X 20mm PROD CODE 3313 SA6003 ROLLER COVER 230M LAMBSWOOL COVERS
WheelBArroWS
Various models available
nAilS, ScreWS, cloutS
Large range available
drAinAge - reln ProductS
Various available
Part ID Description
MH-CONE450 SAFETY CONE 450MM MH-CONE450RB SAFETY CONE 450MM - WITH REFLECTIVE BAND
MH-CONE700 SAFETY CONE 700MM MH-CONE700RB SAFETY CONE 700MM - WITH REFLECTIVE BAND
SAfety coneS
Part ID Description
MH-BOLLARD6 BOLLARD & 6KG RUBBER BASE MH-BOLLARD8 BOLLARD & 8KG RUBBER BASE
BollArdS
Part ID Description
MH-KP5 KNEE PADS - HEAVY DUTY
knee PAdS
Part ID Description
We’ve got
the gear
you need
TRAdE sTOREs
Customer service 1300 737 787
National Head Office: 7 Lucca Road, Wyong NSW 2259 02 4350 5000 NEw SOUTh walES
Beresfield 02 4964 4277 Coffs Harbour 02 6652 3599 Narellan 02 4647 0623 Padstow 02 9771 6626 Penrith 02 4722 9259 Riverstone 02 9627 9133 Tuggerah 02 4352 2287 Wetherill Park 02 8781 2051
aUSTRalIaN CaPITal TERRITORY
