PLUMBING SUBMITTAL
22 40 00
ACADEMIC BUILDING & PATRIOT’S CASA
TEXAS A&M UNIVERSITY - SAN ANTONIO, TX
NO. 25-3122, VAC NO. 39019
OWNER:
THE TEXAS A&M UNIVERSITY SYSTEM
ARCHITECT:
KELL MUNOZ ARCHITECTS, INC.
1017 N. MAIN AVENUE, SUITE 300
SAN ANTONIO, TEXAS 78212
PHONE: 210-349-1163
MEP ENGINEER:
SHAH SMITH & ASSOCIATES, INC.
2825 WILCREST DR. SUITE 350
HOUSTON, TX 77042
PHONE: 713-780-7563
GENERAL CONTRACTOR:
BARTLETT COCKE
8706 LOCKWAY
SAN ANTONIO, TX 78217
PHONE: 210-655-1031
PLUMBING CONTRACTOR:
VICTORIA AIR CONDITIOING, LTD
513 PROFIT DRIVE
VICTORIA, TEXAS 77901
PHONE: 361-578-5241 (212)
PLUMBING SUBMITTAL
22 40 00
ACADEMIC BUILDING & PATRIOT’S CASA
TEXAS A&M UNIVERSITY - SAN ANTONIO, TX
NO. 25-3122, VAC NO. 39019
TABLE OF CONTENTS
SPEC #
ITEM
VENDOR
PLUMBING SUBMITTAL
22 40 00
ACADEMIC BUILDING & PATRIOT’S CASA
TEXAS A&M UNIVERSITY - SAN ANTONIO, TX
NO. 25-3122, VAC NO. 39019
LIST OF SUPPLIERS/SUBCONTRACTORS
MORRISON SUPPLY CO 10130 JONESMALTSBERGER RD
SAN ANTONIO, TX 78216 POC: STEVE TSCHIRHART
PHONE: 210-344-4436 EMAIL: [email protected]
ACADEMIC BUILDING & PATRIOT’S CASA
TEXAS A&M UNIVERSITY - SAN ANTONIO, TX
NO. 25-3122
PLUMBING SUBMITTAL
SPECIFICATION SECTION
SECTION 22 40 00
PLUMBING FIXTURES
2.2 WATER CLOSETS - WC-1,2
2.3 LAVATORIES - L-1,2
2.4 URINALS - UR-1,2
2.5 MOP SINKS - MS-1,2
2.6 SINKS - SK-1,2,3,4
2.7 FIXTURE CARRIERS - WC, UR, LAV, EDF
2.8 ROUGH-IN BOX - RB-1
2.9 EMERGENCY SAFETY EQUIPMENT - ES-1
* RFI – NOT INCLUDED IN SUBMITTAL AT THIS TIME
2.10 WATER HAMMER ARRESTORS - WHA, WHC
10130 JONES MALTSBERGER ROAD * SAN ANTONIO, TEXAS 78216-4149 SUBMITTAL & SPECIFICATIONS ******************************************************************************************* SUBMITTAL NO. 118548 PROJECT DATA: Q3491540
TEXAS A&M UNIVERSITY CENTRAL ACADEMIC & PATRIOT'S CASA
GENERAL CONTRACTOR:
ARCHITECT: KELL MUNOZ
ENGINEER: SHAH SMITH
*******************************************************************************************
*******************************************************************************************
DATED: 03/27/2013
CUSTOMER: VICTORIA AIR CONDITIONING LTD.
Page No. 1
SECTION NAME:
WC-1 & 2
ITEMS CONTAINED IN SECTION:
WHT 1.28GPF W/HUNG ELONG BOWL
-FLUSH VALVE
-Z5956SS-EL WHTE EL XH O/F L/C SEAT
-REV.A DWG. NO. 84322 DATE: 4/13/10 PRODUCT NO. Z5615-BWL ZURN INDUSTRIES, LLC. COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE SANFORD NC 27330
Phone: 1-800-997-3876 Fax: 919-775-3541 World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905-405-8272 Fax: 905-405-1292
These dimensions and specifications are subject to change without notice.
Fixture dimensions meet ANSI/ASME standard A112.19.2 and CAN/CSA B45 requirements.
Z5615-BWL
HET Elongated Wall Hung
EcoVantage
®Flush Valve Toilet System
Z5615 HET Series
• Zurn HET Toilet System designed for optimal
performance between Zurn fixture and Zurn flush valve at 1.28 gpf (4.8 Lpf), 1.6 gpf (6.0 Lpf) or Dual Flush volumes to save water.
•1.28 gpf (4.8 lpf) or 1.6 gpf (6.0 lpf) or Dual Flush •1.28 gpf offers 20% water savings over 1.6 gpf system • Vitreous china
• Elongated front rim • 2-1/8" fully glazed trapway
• High efficiency siphon jet flush action • Shipping Weight: 40 lbs.
TAG
Meets the American Disabilities Guidelines and ANSI A117.1 requirements when installed according to these requirements.
Z5615 Series Elongated
See Zurn One Systems for suggested packages.
Engineering Specification Z5615-BWL
EcoVantage High Efficiency Toilet System
- Vitreous China, 1.28 gpf [4.8 lpf] or greater high efficiency, wall hung toilet with siphon jet flushing action and elongated front rim with 1-1/2” top spud. This bowl is designed to perform to industry standards with as little as 1.28 gallons per flush, engineered to provide optimal performance and 20% water savings over conventional 1.6 gpf toilets.
*Replaces Zurn Z5610 Z5616-BWL
EcoVantage High Efficiency Toilet System
- Vitreous China, 1.28 gpf [4.8 lpf] or greater high efficiency, wall hung toilet with siphon jet flushing action and elongated front rim with integral bedpan lugs, and 1-1/2” top spud. This bowl is designed to perform to industry standards with as little as 1.28 gallons per flush, engineered to provide optimal performance and 20% water savings over conventional 1.6 gpf toilets.
*Replaces Zurn Z5611
This space is for Architectural/Engineering Approval
Suffix Options:
-RF Retro-Fit Nut Kit for extending carrier
studs from existing wall.
Recommended Trim:
Z5955SS-EL
Elongated, standard white,
open front toilet seat less cover with stainless
steel check hinge.
Note:
To ensure system performance:
Minimum Running Water Pressure = 25 psi.
EcoVantage® is a registered trademark of Zurn Industries
REV. A DWG. NO. 84322 DATE: 4/13/10 PRODUCT NO. Z5615-BWL ZURN INDUSTRIES, LLC. COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE SANFORD NC 27330
Phone: 1-800-997-3876 Fax: 919-775-3541 World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905-405-8272 Fax: 905-405-1292
Z5615-BWL
HET Elongated Wall Hung
EcoVantage
®Flush Valve Toilet System
Rough-in
TAG
Meets the American Disabilities Guidelines and ANSI A117.1 requirements when installed according to these requirements.
These dimensions and specifications are subject to change without notice.
Fixture dimensions meet ANSI/ASME standard A112.19.2 and CAN/CSA B45 requirements.
Rough-in dimensions for Z5615 Series
• Z5615-BWL with top spud, shown with Z6000AV manual valve
Note: For ADA compliance, rim
height should be installed 17” from
finished floor.
EcoVantage® is a registered trademark of Zurn Industries
FINISHED WALL 712 [191] 934 [248] 9 [229] 1214 [311] 312 [89] Ø1 [Ø25] 514 [134] 1314 [337] FINISHED FLOOR 18 716 [468] 512 [140] 1438 [365] 434 [121] 1 [25] I.P.S. 134 [45] 158 [41] 15 [381] C/L S.A. C/L OUTLET 1112 [292] 2434 [628] 1 16 [2] 5 8 [16] 338 [86] 512 [140]
BACK VIEW OF FLANGE SECTION THRU. OUTLET 234[70]
ZURN INDUSTRIES, LLC. ♦♦♦♦♦ COMMERCIAL BRASS OPERATION ♦♦♦♦♦ 5900 ELWIN BUCHANAN DRIVE ♦♦♦♦♦ SANFORD NC 27330 Phone: 1-800-997-3876 ♦♦♦♦♦ Fax: 919-775-3541 ♦♦♦♦♦ World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED ♦♦♦♦♦ 3544 Nashua Drive ♦♦♦♦♦ Mississauga, Ontario L4V1L2 ♦♦♦♦♦ Phone: 905-405-8272 Fax: 905-405-1292
Aquaflush® is a registered trademark of Zurn Industries, LLC.
AquaSense® is a registered trademark of Zurn Industries, LLC.
Exposed ZER6000PL-HET-CPM Model
1.28 GPF Sensor Operated Battery Powered Flush Valve
For Water Closets
Suffix Options (Check/Specify Appropriate Options) _____ -YJ Split Ring Pipe Support
_____ -YK Solid Ring Pipe Support
_____ -YO Bumper On Angle Stop
_____ Other
This space is for Architectural/Engineering Approval
Rev. A Date: 9/18/09
Dwg. No. 200225 Product No. ZER6000PL-HET-CPM
ENGINEERING SPECIFICATION: ZURN ZER6000PL-HET-CPM AquaSense Exposed Closet Flush Valve - Exposed,
quiet diaphragm-type, chrome plated, flushometer valve with a polished exterior. Complete with Zurn's 1.28 gpf AquaVantage®
TPE chloramine resistant, dual seal diaphragm with a clog resistant by-pass. The valve incorporates a 6VDC motor ac-tuator, a battery powered automatic sensor, high impact re-sistant polycarbonate housing and chrome plated metal cover with manual override push button and 10 degree angled sen-sor, high back pressure vacuum breaker, one piece hex cou-pling nut, adjustable tailpiece, spud coucou-pling and flange for top spud connection. Control stop has internal siphon-guard protection. The AquaFlush® Plus is also furnished with a sweat solder kit, vandal resistant stop cap, and cast wall flange with set screw. Internal seals are made of chloramine resistant materials.
AquaSense
®®®®®Model
TAG
The information contained in this document is subject to change without notice. Please contact Zurn for most up to date information.
Page No. 9
SECTION NAME:
L-1
ITEMS CONTAINED IN SECTION:
UNDRCOUNTER WHT 19X16 LAVATORY
-BATTERY SENSOR LAV-FAUCET
-3/8" THERMO MIXING VALVE
-Z8746 CP W'CHR LAV STRN
-Z8802LR-LK CP 1/2IPX3/8OD LAV SPLY
-Z87019BN CP 1-1/4X1-1/2 P-TRAP/CO 17GA
-Z8910 CP 1-1/2OD CAST FLG W/SCREW
-102 WH TRUBRO TRAP & H/C ANG VLV CVR
-Zurn Plumbing Products Group Commercial Brass and Fixtures Operation
2640 South Work Street · Falconer, NY 14733 · Phone: 716-665-1132 · Fax: 716-665-1135 · www.zurn.com
REV. A DWG. NO. 80597 DATE: 7/31/06 C.N. NO. 94625 PRODUCT NO. Z5220
These dimensions and specifications are subject to change without notice.
Fixture dimensions meet ANSI/ASME standard A112.19.2 and CAN/CSA B45 requirements.
Z5220
19” x 16” Undermount Lavatory
Z5220
• 19" [483 mm] x 16" [406 mm]
• Vitreous china
• Rimless oval design for undermount
installation
• Front overflow
• Waste: 1-1/4" O.D.
• Depth: 5"
• Shipping Weight: 22 lbs.
TAG
Meets the American Disabilities Guidelines and ANSI A117.1 requirements when lavatory is installed 864mm (34”) from finished floor.
Z5220 19" x 16" vitreous china undermount
lavatory.
Z5220 Series
See Zurn One Systems for suggested packages.
Engineering Specification
:
This space is for Architectural/engineering Approval
Recommended Trim
:
Z8743-PC Grid Strainer
Z8700 SERIES P-Trap
Z8800 SERIES Stop with flexible supplies
Z8946-1-NT ADA trap, stop, and supply
protectors
Optional Trim
:
Z8746-PC ADA grid Strainer
Z8946-3-NT ADA trap, stop, and supply
protectors for offset grid strainers.
Zurn Plumbing Products Group Commercial Brass and Fixtures Operation
2640 South Work Street · Falconer, NY 14733 · Phone: 716-665-1132 · Fax: 716-665-1135 · www.zurn.com
REV. A DWG. NO. 80597 DATE: 7/31/06 C.N. NO. 94625 PRODUCT NO. Z5220
Z5220
19” x 16” Undermount Lavatory
Rough-in
TAG
Meets the American Disabilities Guidelines and ANSI A117.1 requirements when lavatory is installed 864mm (34”) from finished floor.
These dimensions and specifications are subject to change without notice.
Fixture dimensions meet ANSI/ASME standard A112.19.2 and CAN/CSA B45 requirements.
Rough-in dimensions for Z5220
8 [203] 12 [305] 10 [254] 712 [191] 31 [787] 1 2 [13] 5 [127] 19 [483] 1634 [425] 14 [356] 16 [406]
ZURN INDUSTRIES, LLC. ♦♦♦♦♦ COMMERCIAL BRASS OPERATION ♦♦♦♦♦ 5900 ELWIN BUCHANAN DRIVE ♦♦♦♦♦ SANFORD NC 27330 Phone: 1-800-997-3876 ♦♦♦♦♦ Fax: 919-775-3541 ♦♦♦♦♦ World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED ♦♦♦♦♦ 3544 Nashua Drive ♦♦♦♦♦ Mississauga, Ontario L4V1L2 ♦♦♦♦♦ Phone: 905-405-8272 Fax: 905-405-1292
AquaSense® is a registered trademark of Zurn Industries, LLC.
AquaSense Sensor Faucet
Rev. F Date: 924/09
Dwg. No. 80689 Product No. Z6915
Suffix Options (Check/Specify Appropriate Options) _____ -F .5 GPM Vandal Resistant Aerator
_____ -IA3 Inlet Adaptor (3/8"[10] compression)
_____ -J 1.5 GPM Laminar Flow Control
_____ -K 1.0 GPM Laminar Flow Control
_____ -L 1.0 GPM Vandal Resistant Aerator _____ -MJ Mini Junction Box
_____ -MT Mixing Tee
_____ -MV Temperature Mixing Valve
_____ -SH Supply Hoses for Mixing Valve
_____ -TMV Thermostatic Mixing Valve for Multiple Faucets
_____ -TMV-1 Thermostatic Mixing Valve for Single
Faucets
_____ Other
AquaSense
®®
TAG
Z6915
AquaSense Battery Powered Faucet
ENGINEERING SPECIFICATION: The Z6915 sensor faucet is a battery powered sensor faucet with an integral four inch
cover plate for retrofit and new construction. The faucet incorporates an infrared convergence-type proximity sensor into the chrome plated cast brass spout. The faucet is furnished complete with sensor module, spout module and in-line filter, 4 "AA" batteries, a 1.5 GPM vandal resistant aerator, an inlet for a 1/2"[13] ball riser, and a single supply hose. Sensor range is factory set for optimum performance.
Z6915-ACA
AquaSense Plug-In Powered Faucet
ENGINEERING SPECIFICATION: The Z6915-ACA sensor faucet is a plug-in powered electronic sensor faucet with an
integral four inch cover plate for retrofit and new construction. The faucet incorporates an infrared convergence-type proximity sensor into the chrome plated cast brass spout. The faucet is furnished complete with sensor module, spout module, in-line filter, a 1.5 GPM vandal resistant aerator, 6 VDC plug-in power converter, an inlet for a 1/2"[13] ball riser, and a single supply hose. Also included are 4 'AA' batteries that provide battery backup power to the faucet during power outages. Sensor range is factory set for optimum performance.
Z6915-CWB
AquaSense Hardwire Powered Faucet
ENGINEERING SPECIFICATION: The Z6915-CWB sensor faucet is a hardwired electronic sensor faucet with an integral
four inch cover plate for retrofit and new construction. The faucet incorporates an infrared convergence-type proximity sensor into the chrome plated cast brass spout. The faucet is furnished complete with sensor module, spout module, in-line filter, a 1.5 GPM vandal resistant aerator, connecting wire to power converter, an inlet for a 1/2"[13] ball riser, and a single supply hose. Also included are 4 'AA' batteries that provide battery backup power to the faucet during power outages. Sensor range is factory set for optimum performance.
NOTE: For Hardwire applications furnish P6000-HW6 power converter. The P6000-HW6 will power up to 8 sensor faucets. Order P6000-HW6 power converter seperately.
ZURN INDUSTRIES, LLC. ♦♦♦♦♦ COMMERCIAL BRASS OPERATION ♦♦♦♦♦ 5900 ELWIN BUCHANAN DRIVE ♦♦♦♦♦ SANFORD NC 27330 Phone: 1-800-997-3876 ♦♦♦♦♦ Fax: 919-775-3541 ♦♦♦♦♦ World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED ♦♦♦♦♦ 3544 Nashua Drive ♦♦♦♦♦ Mississauga, Ontario L4V1L2 ♦♦♦♦♦ Phone: 905-405-8272 Fax: 905-405-1292
AquaSense® is a registered trademark of Zurn Industries, LLC.
TYPICAL Z6915
AquaSense Battery
Powered Faucet
TYPICAL Z6915-ACA
AquaSense Plug-In
Powered Faucet
TYPICAL Z6915-CWB
AquaSense Hardwire
Powered Faucet
Optional:* Optional -MJ mini junction box for connecting up to 8 faucets
Optional Mixing Valves
P6900-MV
Temperature Mixing Valve P6900-MT
Mixing Tee
NOTE: MUST USE EITHER ZURN P6000-HW6 HARDWIRE POWER CONVERTER OR ZURN P6000-PC6 PLUG-IN POWER CONVERTER TO ENSURE PROPER OPERATION. USING A POWER CONVERTER OTHER THAN ZURN MAY RESULT IN OPERATION MALFUNCTION OR UNIT FAILURE.
Submittal Data Sheet S-841
April 2008
1360 Elmwood Avenue, Cranston, RI 02910 USA Phone: 401.461.1200 Fax: 401.941.5310
Email: [email protected]
Web Site: http://www.leonardvalve.com Engineer's Approval Job # ________________
Arch/Eng. ____________ Contractor ____________
THERMOSTATIC
MIXING
VALVE
MODEL 170
THERMOSTATIC POINT OF USE
MIXING VALVE
MODEL 3/8" inlets, 3/8" outlet, compression
connections
MATERIALS:
Bronze body Locked temperature adjustment cap (vandal resistant)
Copper encapsulated thermostat assembly with polymer thermoplastic shuttle
Stainless steel springs Buna-N O'rings
Integral check valves on hot and cold inlets Compression fittings on inlets and outlet
PRESSURE-TEMPERATURE:
Minimum Flow:0.5 GPM (1.9 l/Min) Maximum Pressure:125 PSI (8.6 BAR) Maximum Hot Water temperature: 200°F- (93°C) Approach Temperature 5°F (2.8°C) above set
point.
____BP- Cold water By-Pass ____BRKT- Mounting Bracket
ASSE 1070 Certified
C H COLD INLET HOT INLET MIXED OUTLET INTEGRAL CHECK LOCK SCREW TEMPERATURE ADJUSTMENT CAP VALVESOPTION: (Furnished separately)
C H BP-OPTION BRKT-OPTION 3.0 11.4 3.6 4.4 50 3.4 20 1.4 6.4 .35 5 .70 10 2.1 30 2.8 40 PRESSURE DROP BAR PSI MINIMUM FLOW 1.9 1.7 2.3 5.0 0.5 8.7 14 17 19 l/min GPM
APPLICATION
The Model 170 is a high performance Temperature Actuated Mixing Valve used to
supply single outlets. Can be used to supply one sensor faucet or one two handle
manual faucet.
1360 Elmwood Avenue, Cranston, RI 02910 USA Phone: 401.461.1200 Fax: 401.941.5310
Email: [email protected]
Web Site: http://www.leonardvalve.com
C H
218"
BRKT-OPTION
Two Handle Faucet
HOT COLD Sensor Faucet COLD HOT MIXED MIXED C H
BP-OPTION
© 2008 Leonard Valve Company Printed in USA 170-BP 170 C H 4" 2" 5 "
Note: Leonard Valve Company reserves the right of product, or design modifications without notice or obligation.
AquaSpec® is a registered trademark of Zurn Industries, Inc.
©2005 Zurn Industries, Inc.
ZURN INDUSTRIES, INC. ♦♦♦♦♦ COMMERCIAL BRASS OPERATION ♦♦♦♦♦ 2640 SOUTH WORK STREET ♦♦♦♦♦ FALCONER NY 14733 Phone: 1-716-665-1132 ♦♦♦♦♦ Fax: 1-716-665-1135 ♦♦♦♦♦ World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED ♦♦♦♦♦ 3544 Nashua Drive ♦♦♦♦♦ Mississauga, Ontario L4V1L2 ♦♦♦♦♦ Phone: 905/405-8272 Fax: 905/405-1292
PRODUCT B DIMENSIONS MASTER WEIGHT
NUMBER OUTLET D F CARTON CARTON
Z8746 1 1/4[32] 5 1/5[130] 8 3/4[222] 18 30
Engineering Specification: Zurn Z8746 – Cast brass body with cast brass open grid
drain strainer, cast brass elbow and 1 1/4[32] 17 gauge tubular brass offset tailpiece for sink depth to 2 1/2[57].
Rev. B Date: 11/28/05 C.N. No. 103280
Dwg. No. 60961 Product No. Z8746
________________________
OFFSET LAVATORY STRAINERS
ADA COMPLIANT
Z8746
TAG _______
____________________
STANDARD STOP WITH FLEXIBLE
LAVATORY SUPPLY
Z8800LR TO Z8809LR
TAG _______
Engineering Specification: Zurn Z8800LR TO Z8809LR Two Zurn chrome plated, solid brass angle stops with round wheel
handles or loose key as specified, two 12"[305mm] flexible chrome plated copper lavatory risers complete with two chrome plated steel flanges. Z8808LR and Z8809LR include 5"[127mm] chrome plated copper extension tubes.
Z8800 THRU Z8803 Z8804 THRU Z8805 Z8806 THRU Z8807 Z8808 THRU Z8809
SUFFIXES
____ - C1 Standard Line Lock Shield Cap ____ - CE Chrome Plated, Cast Brass, Setscrew
____ - D Chrome Plated Steel, Deep Bell Flange (Bell Type) ____ - Q Quarter-Turn Stops
____ - WE Wrot Brass, Deep Flange, (Bell Type) ____ - XP Cross Handle
____ - 3 3[76] Nipple ____ - 5 5[127] Nipple ____ - 15 15[381] Supply Tube ____ - 20 20[508] Supply Tube
PRODUCT MASTER WEIGHT CARTON
NUMBER CONNECTIONS EXT. CARTON LR LRLK
Z-8800LR 3/8 [10] IPS x 3/8 [10] OD - 25 24 Z8800LRLK 3/8 [10] IPS x 3/8 [10] OD - 25 25 Z8801LR 3/8 [10] IPS x 1/2 [13] OD - 25 24 Z8801LRLK 3/8 [10] IPS x 1/2 [13] OD - 25 25 Z8802LR 1/2 [13] IPS x 3/8 [10]OD - 25 24 Z8802LRLK 1/2 [13] IPS x 3/8 [10] OD - 25 25 Z8803LR 1/2 [13] IPS x 1/2 [13] OD - 25 24 Z8803LRLK 1/2 [13] IPS x 1/2 [13] OD - 25 25 Z8804LR 1/2 [13] NOM x 3/8 [10] OD - 25 24 Z8804LRLK 1/2 [13] NOM x 3/8 [10] OD - 25 25 Z8805LR 1/2 [13] NOM x 1/2 [13] OD - 25 24 Z8805LRLK 1/2 [13] NOM x 1/2 [13] OD - 25 25 Z8806LR 1/2 [13] SWT x 3/8 [10] OD - 25 24 Z8806LRLK 1/2 [13] SWT x 3/8 [10] OD - 25 25 Z8807LR 1/2 [13] SWT x 1/2 [13] OD - 25 24 Z8807LRLK 1/2 [13] SWT x 1/2 [13] OD - 25 25 Z8808LR 1/2 [13] SWT x 3/8 [10] OD 5 25 28 Z8808LRLK 1/2 [13] SWT x 3/8 [10] OD 5 25 30 Z8809LR 1/2[13] SWT x1/2[13] OD 5 25 28 Z8809LRLK 1/2 [13] SWT x 1/2 [13] OD 5 25 30
Rev. F Date: 11/15/07 C.N. No. 106919
Dwg. No. 60968 Product No. Z8800LR TO Z8809LR *REGULARLY FURNISHED UNLESS OTHERWISE SPECIFIED
AquaSpec® is a registered trademark of Zurn Industries, LLC
©2007 Zurn Industries, LLC
ZURN INDUSTRIES, LLC ♦♦♦♦♦ COMMERCIAL BRASS OPERATION ♦♦♦♦♦ 2640 SOUTH WORK STREET ♦♦♦♦♦ FALCONER NY 14733 Phone: 1-716-665-1132 ♦♦♦♦♦ Fax: 1-716-665-1135 ♦♦♦♦♦ World Wide Web: www.zurn.com
AquaSpec® is a registered trademark of Zurn Industries, LLC
©2009 Zurn Industries, LLC
Rev. i Date: 8/19/09 C.N. No. 125101 Dwg. No. 60111 Product No. Z8700-PC to Z8708-PC
ZURN INDUSTRIES, LLC ♦♦♦♦♦ COMMERCIAL BRASS OPERATION ♦♦♦♦♦ 2640 SOUTH WORK STREET ♦♦♦♦♦ FALCONER NY 14733 Phone: 1-800-997-3876 ♦♦♦♦♦ Fax: 1-919-775-3541 ♦♦♦♦♦ www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED ♦♦♦ 3544 Nashua Drive ♦♦♦ ♦♦♦♦ Mississauga, Ontario L4V1L2 ♦♦♦♦♦ Phone: 905/405-8272 Fax: 905/405-1292
Suffix Description
____ -B Brass Nuts ____ -BX Box Escutcheon
____ -CE Cast Brass Escutcheon with Setscrew ____ -D Deep Escutcheon
____ -J Metal to Metal Ground Joint Connection ____ -WC Waste Connections - Compression
____ -15 15[381] C Dim. 1 1/4[32] and 1 1/2[38] Only ____ -18 18[457] C Dim. 1 1/4[32] and 1 1/2[38] Only
Engineering Specification: Zurn Z8700-PC to Z8708-PC. – Chrome-plated cast brass (copper alloy) body P-trap with cleanout, tubular brass wall bend as specified, die-cast nuts, and shallow escutcheon with compression inlet.
PRODUCT A B DIMENSIONS MASTER WEIGHT
NUMBER INLET in[mm] OUTLET in[mm] GAUGE C in[mm] D in[mm] E in[mm] CARTON CARTON [lbs]
Z8700-PC 1 1/4[32] 1 1/4[32] 17 10[254] 2 1/2[64] 7 1/2[191] 12 24 Z8700-8-PC 1 1/4[32] 1 1/4[32] 17 11[279] 2 1/2[64] 8 1/2[216] 12 24 Z8700-15-PC 1 1/4[32] 1 1/4[32] 17 15[381] 2 1/2[64] 12 1/2[318] 18 40 Z8701-PC 1 1/4[32] 1 1/2[38] 17 10 1/2[267] 3[76] 7 1/2[191] 12 24 Z8701-9-PC 1 1/4[32] 1 1/2[38] 17 12[305] 3[76] 9[229] 12 24 Z8701-15-PC 1 1/4[32] 1 1/2[38] 17 15[381] 3[76] 12[305] 18 42 Z8702-PC 1 1/2[38] 1 1/2[38] 17 10 1/2[267] 3[76] 7 1/2[191] 12 24 Z8702-9-PC 1 1/2[38] 1 1/2[38] 17 12[305] 3[76] 9[229] 12 24 Z8702-15-PC 1 1/2[38] 1 1/2[38] 17 15[381] 3[76] 12[305] 18 42 Z8703B-PC** 1 1/2[38] 2[51] 17 12 1/2[318] 3 1/2[89] 9[229] 6 18 Z8704B-PC** 2[51] 2[51] 17 12 1/2[318] 3 1/2[89] 9[229] 6 18 Z8706-PC 1 1/4[32] 1 1/4[32] 20 10[254] 2 1/2[64] 7 1/2[191] 12 24 Z8707-PC 1 1/4[32] 1 1/2[38] 20 10 1/2[267] 3[76] 7 1/2[191] 12 24 Z8708-PC 1 1/2[38] 1 1/2[38] 20 10 1/2[267] 3[76] 7 1/2[191] 12 24 _______________
SEMI-CAST P-TRAPS WITH WALL BEND
Z8700-PC TO Z8708-PC
TAG _______
OPTIONAL ACCESSORIES
** SHIPPED WITH BRASS NUTS UNLESS OTHERWISE SPECIFIED
______
CAST BRASS FLANGES WITH SET SCREW
Z8900-PC TO Z8912-PC
TAG _______
AquaSpec® is a registered trademark of Zurn Industries, LLC
©2008 Zurn Industries, LLC
Rev. C Date: 4/6//11 C.N. No. 127568
Dwg. No. 60990 Product No. Z8900-PC TO Z8912-PC
ZURN INDUSTRIES, LLC ♦♦♦♦♦ COMMERCIAL BRASS OPERATION ♦♦♦♦ 2640 SOUTH WORK STREET ♦♦ ♦♦♦♦ FALCONER NY 14733 Phone: 1-800-997-3876 ♦♦♦♦♦ Fax: 1-919-775-3541 ♦♦♦♦ www.zurn.com♦
In Canada: ZURN INDUSTRIES LIMITED ♦♦♦♦♦ 3544 Nashua Drive ♦♦♦♦♦ Mississauga, Ontario L4V1L2 ♦♦♦♦♦ Phone: 905/405-8272 Fax: 905/405-1292
Engineering Specification: Zurn Z8900PC to Z8912PC -Chrome plated, cast brass flange with set screw.
PRODUCT A B MASTER WEIGHT
NUMBER CARTON CARTON
Z8900-PC 3/8[10] IPS, 11/16 O.D. 2.38 100 20 Z8901-PC 1/2[13] IPS 2.25 100 20 Z8902-PC 5/8[16] OD 2.38 100 20 Z8904-PC 3/4[19] IPS 2.25 100 20 Z8905-PC 7/8[22] OD 2.25 100 20 Z8906-PC 1[25] IPS 2.75 100 20 Z8907-PC 1 1/4[32] IPS 2.75 50 12 Z8908-PC 1 1/4[32] OD 3.00 50 12 Z8909-PC 1 1/2[38] IPS 3.00 50 15 Z8910-PC 1 1/2[38] OD 2.94 50 15 Z8911-PC 2[51] IPS 3.62 50 15 Z8912-PC 2[51] OD 3.25 50 15
■
■ Model #99 E-Z
One angle valve and supply cover
__________________
■
■ Model #100 E-Z
One P-trap cover
_________________
■
■ Model #400W*
One P-trap cover
_________________
■
■ Model #101 E-Z
One P-trap cover, one angle valve cover
_________________
■
■ Model #401W*
One P-trap cover, one angle valve cover
General Description:
LAVGUARD®2 E-Z Series waste and supply piping
covers satisfy ADA compliance requirements. Built-in E-Z Grip internal fasteners and internal, E-Z Tear-To-Fit trimming feature allow for fast installation without tools. Series #100 E-Z kits are designed to fit on all tubular and cast brass P-trap assemblies.Series #400 kits are the “original” LAVGUARDdesign and fit schedule 40
ABS and PVC P-trap assemblies — regardless of their geometry or rotational offset. Valve cover completely encloses angle valve and supply tube for both handled and keyed type water stops.
____________________________________________
Material Molded vinyl
____________________________________________ Nominal Wall 1/8" constant
____________________________________________
Durometer 70 -80 - Shore A
____________________________________________ UV Protection Will not fade or discolor ____________________________________________ Durability Virtually indestructible ____________________________________________ Trimming (E-Z Series) Internal, E-Z Tear-To-Fit
trim feature
____________________________________________ Fasteners (E-Z Series) Internal E-Z Grip fasteners
(reusable)
____________________________________________
Color China white
____________________________________________ Paintability Apply Latex paint
____________________________________________ Burning Characteristics Self extinguished
ASTM D-635 0 sec (ATB) 0 mm (AEB) ____________________________________________ Bacteria/Fungus ASTM G21 and G22/ Resistance Result: 0 growth ____________________________________________ Maintenance Use common detergents ____________________________________________
Submittal Sheet
ADA-compliant undersink protection
TRUEBRO reserves the right to make product and material changes at any time without notice. 2 / 07 IPS Corporation, 202 Industrial Park Lane, Collierville, TN 38017
(901) 853-5001 (800) 340-5969 FAX: (901) 853-5008 e-mail: [email protected] Internet: http://www.truebro.com
Job/Location
________________________________________
Designer
_________________________________________
■
■Model #102 E-Z
One P-trap cover, two angle valves and covers
___________________
■
■Model #402W*
One P-trap cover, two angle valves and covers
___________________
■
■Model #103 E-Z
One P-trap cover, two angle valves and supply covers, one 5" offset tailpiece wheelchair strainer cover
___________________
■
■Accessory #105 E-Z
One 5" offset tailpiece wheelchair strainer assembly
#100 E-Z Series (shown above right) for tubular and cast brass P-trap assemblies.
#400W * Series(original design) for schedule 40 P-trap assemblies.
Manufactured under one or more of the following U.S. or Canadian patents. Other patents pending.
5,303,730 5,360,031 5,524,669 5,564,463 5,678,598 5,699,828 5,915,412 5,915,413 5,901,739 5,960,820 2,075,324 2,119,427 2,136,027 2,158,083
10" waste arm cover with internal E-Z Tear-To-Fit trim feature 9" supply tube cover with internal E-Z Tear-To-Fit trim grooves J-bend covers all tubular and cast brass
configurations Internal ribs add cushioning
and thermal resistance
10" tailpiece cover E-Z Tear-To-Fit trim grooves
E-Z Grip internal fasteners
Vent hole keeps P-trap dry Vent slots keep valve dry
Install over pipes. Press finger recesses to engage internal fasteners. To remove covers, firmly pull seam apart using a strong grip. Tear-to-fit on internal dimensioned tear lines. ■ ■ Accessory #105-K Kohler 6" offset
____________________
■ ■ Accessory #106 E-ZOne basket strainer cover and offset waste cover (adjustable to 18")
____________________
■
■ Accessory #107 E-Z
Two basket strainer covers and center or end outlet waste cover (adjustable)
____________________
■
■ Accessory #Ex99 E-Z
One 16" extension for water supply
____________________
■
■ Accessory #Ex100 E-Z
One 16" extension for drain waste arm or tailpiece
Center Outlet Accessory
106 E-Z End Outlet
Accessory 107 E-Z (Configuration Options Shown) Accessory
105 E-Z
Shown withAccessory #105 E-Z (fits all standard 5" offset
wheelchair strainers). Accessories105 E-Z,106 E-Z, and 107 E-Z can be purchased separately.
NOTE: Accessory #105 E-Z is included in#103 E-Z kits.
E-Z Series Shown
*All #400W series items are the “original” LAVGUARD®design and
construction. Specifications may change without notice.
Page No. 18
SECTION NAME:
L-2
ITEMS CONTAINED IN SECTION:
W/HUNG 20X18 4"CC LAVATORY
-BATTERY SENSOR LAV-FAUCET
-3/8" THERMO MIXING VALVE
-Z8746 CP W'CHR LAV STRN
-Z8802LR-LK CP 1/2IPX3/8OD LAV SPLY
-Z87019BN CP 1-1/4X1-1/2 P-TRAP/CO 17GA
-Z8910 CP 1-1/2OD CAST FLG W/SCREW
-102 WH TRUBRO TRAP & H/C ANG VLV CVR
-Z5340
20” x 18” Wall Hung Lavatory
TAG
ZURN INDUSTRIES, LLC. ♦ COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE ♦ SANFORD NC 27330 Phone: 1-800-997-3876 ♦ Fax: 919-775-3541
www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED
3544 Nashua Drive ♦ Mississauga, Ontario L4V1L2 Phone: 905-405-8272 Fax: 905-405-1292
Rev. G Date: 8/20/12
Dwg. No. 80550 Product No. Z5340
Z5340 Series
• 20" [508 mm] x 18" [457 mm]
• Vitreous china
• Faucet holes for single, 4", or 8" centers
• Available with right or left side soap hole
punching (Single or 4” centers only)
• Wall hung lavatory provided with wall
hanger or for use with concealed arm
carrier systems
• Front overflow
• Waste: 1-1/4" O.D.
• Depth: 6-3/8"
• Shipping Weight: 42 lbs.
Meets the American Disabilities Guidelines and ANSI A117.1 requirements when lavatory is installed 34” [864mm] from finished floor.
Engineering Specification:
Z5341 20” x 18” vitreous china wall hung lavatory
with single faucet hole. Provided with hanger plate
and holes for concealed arm carrier systems.
Z5344 20” x 18” vitreous china wall hung lavatory
with 4” center faucet hole. Provided with hanger
plate and holes for concealed arm carrier
systems.
Z5348 20” x 18” vitreous china wall hung lavatory
with 8” center faucet hole. Provided with hanger
plate and holes for concealed arm carrier
systems. (Not available with the -LS or -RS)
These dimensions and specifications are subject to change without notice.
Fixture dimensions meet ANSI/ASME standard A112.19.2 and CAN/CSA B45 requirements.
Z5340 Series
See Zurn One Systems for suggested packages.
Architectural/Engineering Approval
Suffix Options:
___ -PED Vitreous china half pedestal
(for use with Z5341 & Z5344 Only)
___ -LS
Left Side Soap Hole.
___ -RS Right Side Soap Hole.
Recommended Trim:
Z8743-PC Grid Strainer.
Z8700 Series P-Trap.
Z8800 Series Stop with Flexible Supplies.
Z8946-1-NT ADA Trap, Stop, and Supply
Protectors.
Optional Trim:
Z8746-PC ADA Grid Strainer.
Z8946-3-NT ADA Trap, Stop, and Supply
Protectors for Offset Grid Strainers.
The information contained in this document is subject to change without notice. Please contact Zurn for most up to date information.
Z5340
20” x 18” Wall Hung Lavatory
TAG
ZURN INDUSTRIES, LLC. ♦ COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE ♦ SANFORD NC 27330 Phone: 1-800-997-3876 ♦ Fax: 919-775-3541
www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED
3544 Nashua Drive ♦ Mississauga, Ontario L4V1L2 Phone: 905-405-8272 Fax: 905-405-1292
Rev. G Date: 8/20/12
Dwg. No. 80550 Product No. Z5340
Meets the American Disabilities Guidelines and ANSI A117.1 requirements when lavatory is installed 34” [864mm ] from finished floor.
These dimensions and specifications are subject to change without notice.
Fixture dimensions meet ANSI/ASME standard A112.19.2 and CAN/CSA B45 requirements.
Rough-in dimensions for Z5340 Series • Z5341 Lavatory with single faucet hole • Z5344 Lavatory with 4" center faucet holes • Z5348 Lavatory with 8" center faucet holes
AVAT O R I E S
Note: Rough-in for concealed arm carrier, see Zurn Z-1231 Rough-in sheet.
(AVAILABLE IN CAST DUCTILE)
1 8 [3] 734 [197] 4 [102] 118 [29] Z1 BRACKET 2X SCALE 27 [686] MIN. 8 [203] MIN. 6 [152] MAX. ADA CLEARANCE9 [229] MIN. FINISHED FLOOR 712 [190] 20 [508] 1612 [418] 318 [79] 4 [102] 8 [203] 1814 [464] 34 [864] (ADA) 31 [787] 712 [190] 3212 [827] 3338 [848] 1014 [260] 1814 [464] 8 [203] 10 [254] 1234 [324] 1412 [368] (Pop-Up Drain) 112 [37] 212 [65] 17 [432] 2112 [546] 314 [83] 514 [133] 514 [133]
ZURN INDUSTRIES, LLC. ♦♦♦♦♦ COMMERCIAL BRASS OPERATION ♦♦♦♦♦ 5900 ELWIN BUCHANAN DRIVE ♦♦♦♦♦ SANFORD NC 27330 Phone: 1-800-997-3876 ♦♦♦♦♦ Fax: 919-775-3541 ♦♦♦♦♦ World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED ♦♦♦♦♦ 3544 Nashua Drive ♦♦♦♦♦ Mississauga, Ontario L4V1L2 ♦♦♦♦♦ Phone: 905-405-8272 Fax: 905-405-1292
AquaSense® is a registered trademark of Zurn Industries, LLC.
AquaSense Sensor Faucet
Rev. F Date: 924/09
Dwg. No. 80689 Product No. Z6915
Suffix Options (Check/Specify Appropriate Options) _____ -F .5 GPM Vandal Resistant Aerator
_____ -IA3 Inlet Adaptor (3/8"[10] compression)
_____ -J 1.5 GPM Laminar Flow Control
_____ -K 1.0 GPM Laminar Flow Control
_____ -L 1.0 GPM Vandal Resistant Aerator _____ -MJ Mini Junction Box
_____ -MT Mixing Tee
_____ -MV Temperature Mixing Valve
_____ -SH Supply Hoses for Mixing Valve
_____ -TMV Thermostatic Mixing Valve for Multiple Faucets
_____ -TMV-1 Thermostatic Mixing Valve for Single
Faucets
_____ Other
AquaSense
®®
TAG
Z6915
AquaSense Battery Powered Faucet
ENGINEERING SPECIFICATION: The Z6915 sensor faucet is a battery powered sensor faucet with an integral four inch
cover plate for retrofit and new construction. The faucet incorporates an infrared convergence-type proximity sensor into the chrome plated cast brass spout. The faucet is furnished complete with sensor module, spout module and in-line filter, 4 "AA" batteries, a 1.5 GPM vandal resistant aerator, an inlet for a 1/2"[13] ball riser, and a single supply hose. Sensor range is factory set for optimum performance.
Z6915-ACA
AquaSense Plug-In Powered Faucet
ENGINEERING SPECIFICATION: The Z6915-ACA sensor faucet is a plug-in powered electronic sensor faucet with an
integral four inch cover plate for retrofit and new construction. The faucet incorporates an infrared convergence-type proximity sensor into the chrome plated cast brass spout. The faucet is furnished complete with sensor module, spout module, in-line filter, a 1.5 GPM vandal resistant aerator, 6 VDC plug-in power converter, an inlet for a 1/2"[13] ball riser, and a single supply hose. Also included are 4 'AA' batteries that provide battery backup power to the faucet during power outages. Sensor range is factory set for optimum performance.
Z6915-CWB
AquaSense Hardwire Powered Faucet
ENGINEERING SPECIFICATION: The Z6915-CWB sensor faucet is a hardwired electronic sensor faucet with an integral
four inch cover plate for retrofit and new construction. The faucet incorporates an infrared convergence-type proximity sensor into the chrome plated cast brass spout. The faucet is furnished complete with sensor module, spout module, in-line filter, a 1.5 GPM vandal resistant aerator, connecting wire to power converter, an inlet for a 1/2"[13] ball riser, and a single supply hose. Also included are 4 'AA' batteries that provide battery backup power to the faucet during power outages. Sensor range is factory set for optimum performance.
NOTE: For Hardwire applications furnish P6000-HW6 power converter. The P6000-HW6 will power up to 8 sensor faucets. Order P6000-HW6 power converter seperately.
ZURN INDUSTRIES, LLC. ♦♦♦♦♦ COMMERCIAL BRASS OPERATION ♦♦♦♦♦ 5900 ELWIN BUCHANAN DRIVE ♦♦♦♦♦ SANFORD NC 27330 Phone: 1-800-997-3876 ♦♦♦♦♦ Fax: 919-775-3541 ♦♦♦♦♦ World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED ♦♦♦♦♦ 3544 Nashua Drive ♦♦♦♦♦ Mississauga, Ontario L4V1L2 ♦♦♦♦♦ Phone: 905-405-8272 Fax: 905-405-1292
AquaSense® is a registered trademark of Zurn Industries, LLC.
TYPICAL Z6915
AquaSense Battery
Powered Faucet
TYPICAL Z6915-ACA
AquaSense Plug-In
Powered Faucet
TYPICAL Z6915-CWB
AquaSense Hardwire
Powered Faucet
Optional:* Optional -MJ mini junction box for connecting up to 8 faucets
Optional Mixing Valves
P6900-MV
Temperature Mixing Valve P6900-MT
Mixing Tee
NOTE: MUST USE EITHER ZURN P6000-HW6 HARDWIRE POWER CONVERTER OR ZURN P6000-PC6 PLUG-IN POWER CONVERTER TO ENSURE PROPER OPERATION. USING A POWER CONVERTER OTHER THAN ZURN MAY RESULT IN OPERATION MALFUNCTION OR UNIT FAILURE.
Submittal Data Sheet S-841
April 2008
1360 Elmwood Avenue, Cranston, RI 02910 USA Phone: 401.461.1200 Fax: 401.941.5310
Email: [email protected]
Web Site: http://www.leonardvalve.com Engineer's Approval Job # ________________
Arch/Eng. ____________ Contractor ____________
THERMOSTATIC
MIXING
VALVE
MODEL 170
THERMOSTATIC POINT OF USE
MIXING VALVE
MODEL 3/8" inlets, 3/8" outlet, compression
connections
MATERIALS:
Bronze body Locked temperature adjustment cap (vandal resistant)
Copper encapsulated thermostat assembly with polymer thermoplastic shuttle
Stainless steel springs Buna-N O'rings
Integral check valves on hot and cold inlets Compression fittings on inlets and outlet
PRESSURE-TEMPERATURE:
Minimum Flow:0.5 GPM (1.9 l/Min) Maximum Pressure:125 PSI (8.6 BAR) Maximum Hot Water temperature: 200°F- (93°C) Approach Temperature 5°F (2.8°C) above set
point.
____BP- Cold water By-Pass ____BRKT- Mounting Bracket
ASSE 1070 Certified
C H COLD INLET HOT INLET MIXED OUTLET INTEGRAL CHECK LOCK SCREW TEMPERATURE ADJUSTMENT CAP VALVESOPTION: (Furnished separately)
C H BP-OPTION BRKT-OPTION 3.0 11.4 3.6 4.4 50 3.4 20 1.4 6.4 .35 5 .70 10 2.1 30 2.8 40 PRESSURE DROP BAR PSI MINIMUM FLOW 1.9 1.7 2.3 5.0 0.5 8.7 14 17 19 l/min GPM
APPLICATION
The Model 170 is a high performance Temperature Actuated Mixing Valve used to
supply single outlets. Can be used to supply one sensor faucet or one two handle
manual faucet.
1360 Elmwood Avenue, Cranston, RI 02910 USA Phone: 401.461.1200 Fax: 401.941.5310
Email: [email protected]
Web Site: http://www.leonardvalve.com
C H
218"
BRKT-OPTION
Two Handle Faucet
HOT COLD Sensor Faucet COLD HOT MIXED MIXED C H
BP-OPTION
© 2008 Leonard Valve Company Printed in USA 170-BP 170 C H 4" 2" 5 "
Note: Leonard Valve Company reserves the right of product, or design modifications without notice or obligation.
AquaSpec® is a registered trademark of Zurn Industries, Inc.
©2005 Zurn Industries, Inc.
ZURN INDUSTRIES, INC. ♦♦♦♦♦ COMMERCIAL BRASS OPERATION ♦♦♦♦♦ 2640 SOUTH WORK STREET ♦♦♦♦♦ FALCONER NY 14733 Phone: 1-716-665-1132 ♦♦♦♦♦ Fax: 1-716-665-1135 ♦♦♦♦♦ World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED ♦♦♦♦♦ 3544 Nashua Drive ♦♦♦♦♦ Mississauga, Ontario L4V1L2 ♦♦♦♦♦ Phone: 905/405-8272 Fax: 905/405-1292
PRODUCT B DIMENSIONS MASTER WEIGHT
NUMBER OUTLET D F CARTON CARTON
Z8746 1 1/4[32] 5 1/5[130] 8 3/4[222] 18 30
Engineering Specification: Zurn Z8746 – Cast brass body with cast brass open grid
drain strainer, cast brass elbow and 1 1/4[32] 17 gauge tubular brass offset tailpiece for sink depth to 2 1/2[57].
Rev. B Date: 11/28/05 C.N. No. 103280
Dwg. No. 60961 Product No. Z8746
________________________
OFFSET LAVATORY STRAINERS
ADA COMPLIANT
Z8746
TAG _______
____________________
STANDARD STOP WITH FLEXIBLE
LAVATORY SUPPLY
Z8800LR TO Z8809LR
TAG _______
Engineering Specification: Zurn Z8800LR TO Z8809LR Two Zurn chrome plated, solid brass angle stops with round wheel
handles or loose key as specified, two 12"[305mm] flexible chrome plated copper lavatory risers complete with two chrome plated steel flanges. Z8808LR and Z8809LR include 5"[127mm] chrome plated copper extension tubes.
Z8800 THRU Z8803 Z8804 THRU Z8805 Z8806 THRU Z8807 Z8808 THRU Z8809
SUFFIXES
____ - C1 Standard Line Lock Shield Cap ____ - CE Chrome Plated, Cast Brass, Setscrew
____ - D Chrome Plated Steel, Deep Bell Flange (Bell Type) ____ - Q Quarter-Turn Stops
____ - WE Wrot Brass, Deep Flange, (Bell Type) ____ - XP Cross Handle
____ - 3 3[76] Nipple ____ - 5 5[127] Nipple ____ - 15 15[381] Supply Tube ____ - 20 20[508] Supply Tube
PRODUCT MASTER WEIGHT CARTON
NUMBER CONNECTIONS EXT. CARTON LR LRLK
Z-8800LR 3/8 [10] IPS x 3/8 [10] OD - 25 24 Z8800LRLK 3/8 [10] IPS x 3/8 [10] OD - 25 25 Z8801LR 3/8 [10] IPS x 1/2 [13] OD - 25 24 Z8801LRLK 3/8 [10] IPS x 1/2 [13] OD - 25 25 Z8802LR 1/2 [13] IPS x 3/8 [10]OD - 25 24 Z8802LRLK 1/2 [13] IPS x 3/8 [10] OD - 25 25 Z8803LR 1/2 [13] IPS x 1/2 [13] OD - 25 24 Z8803LRLK 1/2 [13] IPS x 1/2 [13] OD - 25 25 Z8804LR 1/2 [13] NOM x 3/8 [10] OD - 25 24 Z8804LRLK 1/2 [13] NOM x 3/8 [10] OD - 25 25 Z8805LR 1/2 [13] NOM x 1/2 [13] OD - 25 24 Z8805LRLK 1/2 [13] NOM x 1/2 [13] OD - 25 25 Z8806LR 1/2 [13] SWT x 3/8 [10] OD - 25 24 Z8806LRLK 1/2 [13] SWT x 3/8 [10] OD - 25 25 Z8807LR 1/2 [13] SWT x 1/2 [13] OD - 25 24 Z8807LRLK 1/2 [13] SWT x 1/2 [13] OD - 25 25 Z8808LR 1/2 [13] SWT x 3/8 [10] OD 5 25 28 Z8808LRLK 1/2 [13] SWT x 3/8 [10] OD 5 25 30 Z8809LR 1/2[13] SWT x1/2[13] OD 5 25 28 Z8809LRLK 1/2 [13] SWT x 1/2 [13] OD 5 25 30
Rev. F Date: 11/15/07 C.N. No. 106919
Dwg. No. 60968 Product No. Z8800LR TO Z8809LR *REGULARLY FURNISHED UNLESS OTHERWISE SPECIFIED
AquaSpec® is a registered trademark of Zurn Industries, LLC
©2007 Zurn Industries, LLC
ZURN INDUSTRIES, LLC ♦♦♦♦♦ COMMERCIAL BRASS OPERATION ♦♦♦♦♦ 2640 SOUTH WORK STREET ♦♦♦♦♦ FALCONER NY 14733 Phone: 1-716-665-1132 ♦♦♦♦♦ Fax: 1-716-665-1135 ♦♦♦♦♦ World Wide Web: www.zurn.com
AquaSpec® is a registered trademark of Zurn Industries, LLC
©2009 Zurn Industries, LLC
Rev. i Date: 8/19/09 C.N. No. 125101 Dwg. No. 60111 Product No. Z8700-PC to Z8708-PC
ZURN INDUSTRIES, LLC ♦♦♦♦♦ COMMERCIAL BRASS OPERATION ♦♦♦♦♦ 2640 SOUTH WORK STREET ♦♦♦♦♦ FALCONER NY 14733 Phone: 1-800-997-3876 ♦♦♦♦♦ Fax: 1-919-775-3541 ♦♦♦♦♦ www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED ♦♦♦ 3544 Nashua Drive ♦♦♦ ♦♦♦♦ Mississauga, Ontario L4V1L2 ♦♦♦♦♦ Phone: 905/405-8272 Fax: 905/405-1292
Suffix Description
____ -B Brass Nuts ____ -BX Box Escutcheon
____ -CE Cast Brass Escutcheon with Setscrew ____ -D Deep Escutcheon
____ -J Metal to Metal Ground Joint Connection ____ -WC Waste Connections - Compression
____ -15 15[381] C Dim. 1 1/4[32] and 1 1/2[38] Only ____ -18 18[457] C Dim. 1 1/4[32] and 1 1/2[38] Only
Engineering Specification: Zurn Z8700-PC to Z8708-PC. – Chrome-plated cast brass (copper alloy) body P-trap with cleanout, tubular brass wall bend as specified, die-cast nuts, and shallow escutcheon with compression inlet.
PRODUCT A B DIMENSIONS MASTER WEIGHT
NUMBER INLET in[mm] OUTLET in[mm] GAUGE C in[mm] D in[mm] E in[mm] CARTON CARTON [lbs]
Z8700-PC 1 1/4[32] 1 1/4[32] 17 10[254] 2 1/2[64] 7 1/2[191] 12 24 Z8700-8-PC 1 1/4[32] 1 1/4[32] 17 11[279] 2 1/2[64] 8 1/2[216] 12 24 Z8700-15-PC 1 1/4[32] 1 1/4[32] 17 15[381] 2 1/2[64] 12 1/2[318] 18 40 Z8701-PC 1 1/4[32] 1 1/2[38] 17 10 1/2[267] 3[76] 7 1/2[191] 12 24 Z8701-9-PC 1 1/4[32] 1 1/2[38] 17 12[305] 3[76] 9[229] 12 24 Z8701-15-PC 1 1/4[32] 1 1/2[38] 17 15[381] 3[76] 12[305] 18 42 Z8702-PC 1 1/2[38] 1 1/2[38] 17 10 1/2[267] 3[76] 7 1/2[191] 12 24 Z8702-9-PC 1 1/2[38] 1 1/2[38] 17 12[305] 3[76] 9[229] 12 24 Z8702-15-PC 1 1/2[38] 1 1/2[38] 17 15[381] 3[76] 12[305] 18 42 Z8703B-PC** 1 1/2[38] 2[51] 17 12 1/2[318] 3 1/2[89] 9[229] 6 18 Z8704B-PC** 2[51] 2[51] 17 12 1/2[318] 3 1/2[89] 9[229] 6 18 Z8706-PC 1 1/4[32] 1 1/4[32] 20 10[254] 2 1/2[64] 7 1/2[191] 12 24 Z8707-PC 1 1/4[32] 1 1/2[38] 20 10 1/2[267] 3[76] 7 1/2[191] 12 24 Z8708-PC 1 1/2[38] 1 1/2[38] 20 10 1/2[267] 3[76] 7 1/2[191] 12 24 _______________
SEMI-CAST P-TRAPS WITH WALL BEND
Z8700-PC TO Z8708-PC
TAG _______
OPTIONAL ACCESSORIES
** SHIPPED WITH BRASS NUTS UNLESS OTHERWISE SPECIFIED
______
CAST BRASS FLANGES WITH SET SCREW
Z8900-PC TO Z8912-PC
TAG _______
AquaSpec® is a registered trademark of Zurn Industries, LLC
©2008 Zurn Industries, LLC
Rev. C Date: 4/6//11 C.N. No. 127568
Dwg. No. 60990 Product No. Z8900-PC TO Z8912-PC
ZURN INDUSTRIES, LLC ♦♦♦♦♦ COMMERCIAL BRASS OPERATION ♦♦♦♦ 2640 SOUTH WORK STREET ♦♦ ♦♦♦♦ FALCONER NY 14733 Phone: 1-800-997-3876 ♦♦♦♦♦ Fax: 1-919-775-3541 ♦♦♦♦ www.zurn.com♦
In Canada: ZURN INDUSTRIES LIMITED ♦♦♦♦♦ 3544 Nashua Drive ♦♦♦♦♦ Mississauga, Ontario L4V1L2 ♦♦♦♦♦ Phone: 905/405-8272 Fax: 905/405-1292
Engineering Specification: Zurn Z8900PC to Z8912PC -Chrome plated, cast brass flange with set screw.
PRODUCT A B MASTER WEIGHT
NUMBER CARTON CARTON
Z8900-PC 3/8[10] IPS, 11/16 O.D. 2.38 100 20 Z8901-PC 1/2[13] IPS 2.25 100 20 Z8902-PC 5/8[16] OD 2.38 100 20 Z8904-PC 3/4[19] IPS 2.25 100 20 Z8905-PC 7/8[22] OD 2.25 100 20 Z8906-PC 1[25] IPS 2.75 100 20 Z8907-PC 1 1/4[32] IPS 2.75 50 12 Z8908-PC 1 1/4[32] OD 3.00 50 12 Z8909-PC 1 1/2[38] IPS 3.00 50 15 Z8910-PC 1 1/2[38] OD 2.94 50 15 Z8911-PC 2[51] IPS 3.62 50 15 Z8912-PC 2[51] OD 3.25 50 15
■
■ Model #99 E-Z
One angle valve and supply cover
__________________
■
■ Model #100 E-Z
One P-trap cover
_________________
■
■ Model #400W*
One P-trap cover
_________________
■
■ Model #101 E-Z
One P-trap cover, one angle valve cover
_________________
■
■ Model #401W*
One P-trap cover, one angle valve cover
General Description:
LAVGUARD®2 E-Z Series waste and supply piping
covers satisfy ADA compliance requirements. Built-in E-Z Grip internal fasteners and internal, E-Z Tear-To-Fit trimming feature allow for fast installation without tools. Series #100 E-Z kits are designed to fit on all tubular and cast brass P-trap assemblies.Series #400 kits are the “original” LAVGUARDdesign and fit schedule 40
ABS and PVC P-trap assemblies — regardless of their geometry or rotational offset. Valve cover completely encloses angle valve and supply tube for both handled and keyed type water stops.
____________________________________________
Material Molded vinyl
____________________________________________ Nominal Wall 1/8" constant
____________________________________________
Durometer 70 -80 - Shore A
____________________________________________ UV Protection Will not fade or discolor ____________________________________________ Durability Virtually indestructible ____________________________________________ Trimming (E-Z Series) Internal, E-Z Tear-To-Fit
trim feature
____________________________________________ Fasteners (E-Z Series) Internal E-Z Grip fasteners
(reusable)
____________________________________________
Color China white
____________________________________________ Paintability Apply Latex paint
____________________________________________ Burning Characteristics Self extinguished
ASTM D-635 0 sec (ATB) 0 mm (AEB) ____________________________________________ Bacteria/Fungus ASTM G21 and G22/ Resistance Result: 0 growth ____________________________________________ Maintenance Use common detergents ____________________________________________
Submittal Sheet
ADA-compliant undersink protection
TRUEBRO reserves the right to make product and material changes at any time without notice. 2 / 07 IPS Corporation, 202 Industrial Park Lane, Collierville, TN 38017
(901) 853-5001 (800) 340-5969 FAX: (901) 853-5008 e-mail: [email protected] Internet: http://www.truebro.com
Job/Location
________________________________________
Designer
_________________________________________
■
■Model #102 E-Z
One P-trap cover, two angle valves and covers
___________________
■
■Model #402W*
One P-trap cover, two angle valves and covers
___________________
■
■Model #103 E-Z
One P-trap cover, two angle valves and supply covers, one 5" offset tailpiece wheelchair strainer cover
___________________
■
■Accessory #105 E-Z
One 5" offset tailpiece wheelchair strainer assembly
#100 E-Z Series (shown above right) for tubular and cast brass P-trap assemblies.
#400W * Series(original design) for schedule 40 P-trap assemblies.
Manufactured under one or more of the following U.S. or Canadian patents. Other patents pending.
5,303,730 5,360,031 5,524,669 5,564,463 5,678,598 5,699,828 5,915,412 5,915,413 5,901,739 5,960,820 2,075,324 2,119,427 2,136,027 2,158,083
10" waste arm cover with internal E-Z Tear-To-Fit trim feature 9" supply tube cover with internal E-Z Tear-To-Fit trim grooves J-bend covers all tubular and cast brass
configurations Internal ribs add cushioning
and thermal resistance
10" tailpiece cover E-Z Tear-To-Fit trim grooves
E-Z Grip internal fasteners
Vent hole keeps P-trap dry Vent slots keep valve dry
Install over pipes. Press finger recesses to engage internal fasteners. To remove covers, firmly pull seam apart using a strong grip. Tear-to-fit on internal dimensioned tear lines. ■ ■ Accessory #105-K Kohler 6" offset
____________________
■ ■ Accessory #106 E-ZOne basket strainer cover and offset waste cover (adjustable to 18")
____________________
■
■ Accessory #107 E-Z
Two basket strainer covers and center or end outlet waste cover (adjustable)
____________________
■
■ Accessory #Ex99 E-Z
One 16" extension for water supply
____________________
■
■ Accessory #Ex100 E-Z
One 16" extension for drain waste arm or tailpiece
Center Outlet Accessory
106 E-Z End Outlet
Accessory 107 E-Z (Configuration Options Shown) Accessory
105 E-Z
Shown withAccessory #105 E-Z (fits all standard 5" offset
wheelchair strainers). Accessories105 E-Z,106 E-Z, and 107 E-Z can be purchased separately.
NOTE: Accessory #105 E-Z is included in#103 E-Z kits.
E-Z Series Shown
*All #400W series items are the “original” LAVGUARD®design and
construction. Specifications may change without notice.
Page No. 27
SECTION NAME:
U-1 & 2
ITEMS CONTAINED IN SECTION:
HIGH-EFF URINAL WHT
-FLUSH VALVE
-S/S URINAL STRAINER
-REV. DWG. NO. 84162 DATE: 01/21/10 PRODUCT NO. Z5798.235.00 ZURN INDUSTRIES, LLC. ♦♦♦♦♦ COMMERCIAL BRASS OPERATION ♦♦♦♦ 5900 ELWIN BUCHANAN DRIVE ♦♦ ♦♦♦♦ SANFORD NC 27330
Phone: 1-800-997-3876 ♦♦♦ Fax: 919-775-3541 ♦♦♦ ♦♦♦♦ World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED ♦♦♦♦♦ 3544 Nashua Drive ♦♦♦♦ Mississauga, Ontario L4V1L2 ♦♦ ♦♦♦ Phone: 905-405-8272 Fax: 905-405-1292♦ EcoVantage® and “The Pint®” are a registered trademarks of Zurn Industries, LLC.
TAG
®
Z5798.235.00
"The Pint
®" 1/8 gpf, EcoVantage
®,
Ultra Low Consumption, Urinal System
This space is for Architectural/engineering Approval
These dimensions and specifications are subject to change without notice.
Fixture dimensions meet ANSI/ASME standards A112.19.2 and CAN/CSA B45 requirements.
Meets the American Disabilities Guidelines and ANSI A117.1 requirements when urinal is installed 17" [432 mm] from finished floor.
Z5798.235.00 Series
•Zurn One ultra low consumption urinal system designed for optimal performance between Zurn fixture and Zurn flush valve to save water while exceeding industry performance standards • 1/8 gallons per flush [0.5 Liters per flush] • Vitreous china
• High efficiency washout flushing action • Over 88% water savings over standard 1.0 gpf [4.0 Lpf] system
• Sensor operated battery powered actuation • Oversized footprint to make retrofit easy • 3/4" top spud
• 2" I.P.S. outlet flange and rubber gasket with integral trap
• 14" extended rim for handicap compliance when installed at proper height
• Vandal resistant outlet strainer included • Shipping Weight: 65 lbs.
Z5798.235.00 Series
ENGINEERING SPECIFICATION:
Z5798.235.00 EcoVantage® Sensor Operated High
Efficiency Urinal (HEU) System - System comes complete with exposed ZER6003AV-ULF high efficiency flushometer valve with sensor operated battery powered actuation and vit-reous china urinal. The system is designed to perform to in-dustry standards with as little as 1/8th gallon per flush. The valve is an exposed, quiet diaphragm-type, chrome plated flushometer valve with a polished exterior. Complete with Zurn's AquaVantage® TPE, chloramine resistant, triple filtered
by-pass. This valve incorporates a 6VDC motor actuater, a bat-tery powered automatic sensor, high impact resistant poly-carbonate housing and chrome plated ABS cover with manual over-ride push buttom, high back pressure vacumm breaker, one piece hex coupling nut, adjustable tailpiece, spud cou-pling and flange for top spud connection. Control stop has internal siphon-guard protection, vandal resistant stop cap, sweat solder kit, and a cast wall flange with set screw. Vitre-ous china urinal is supplied with 3/4" top spud, 2" outlet con-nection, vandal resistant outlet strainer and universal retrofit hanger bracket.
SEE NEXT PAGE
FOR VALVE
REV. DWG. NO. 84162 DATE: 01/21/10 PRODUCT NO. Z5798.235.00 ZURN INDUSTRIES, LLC. ♦♦♦♦♦ COMMERCIAL BRASS OPERATION ♦♦♦♦ 5900 ELWIN BUCHANAN DRIVE ♦♦ ♦♦♦♦ SANFORD NC 27330
Phone: 1-800-997-3876 ♦♦♦ Fax: 919-775-3541 ♦♦♦ ♦♦♦♦ World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED ♦♦♦♦♦ 3544 Nashua Drive ♦♦♦♦ Mississauga, Ontario L4V1L2 ♦♦ ♦♦♦ Phone: 905-405-8272 Fax: 905-405-1292♦ EcoVantage® and “The Pint®” are a registered trademarks of Zurn Industries, LLC.
TAG
®
These dimensions and specifications are subject to change without notice.
Fixture dimensions meet ANSI/ASME standard A112.19.2 and CAN/ CSA B45 requirements.
Meets the American Disabilities Guidelines and ANSI A117.1 require-ments when urinal is installed 17" [432 mm] from finished floor.
Rough-in dimensions for Z5798.235.00 Series *Z5798 with top spud
Z5798.235.00
"The Pint
®" 1/8 gpf, EcoVantage
®, Ultra Low
Consumption, Urinal System Rough-In
3 4 [19] VACUUM BREAKER TUBE 1414 [361] FINISHED WALL 24 [610] (17 [432] ADA) C.L. OUTLET 1912 [495] (122 [317.5] ADA)1 421 [114] 38 [965] (31 [787] ADA) 2558 [651] 212 [64] 3 4 [19] I.P.S. SUPPLY 1112 [292] 434±1/2 [121±13] 258 [67] FINISHED FLOOR 521 [140] 1812 [470] 15 MAX 12 MIN 4 [102] 1514 [387] 814 [210] 1114 [286] 14 [356] UNIVERSAL RETROFIT BRACKET (UB) 1 2 [13] TYP. SLOT SPACING 1821 [470] MAX 1521 [394] MIN
ZURN INDUSTRIES, LLC. COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE SANFORD NC 27330 Phone: 1-800-997-3876 Fax: 919-775-3541 World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905-405-8272 Fax: 905-405-1292 AquaVantage® and AV are trademarks of Zurn Industries, LLC.
AquaSense® is a registered trademark of Zurn Industries, LLC.
Exposed ZER6003PL-CPM Model
Sensor Operated Battery Powered Flush Valve
For 3/4" Urinals
Suffix Options (Check/Specify Appropriate Options) _____ -TFB Triple Filter Bypass (Not available for -ULF)
_____ -YJ Split Ring Pipe Support
_____ -YK Solid Ring Pipe Support
_____ Other
This space is for Architectural/Engineering Approval Flow Options -ULF 0.125 GPF -EWS 0.5 GPF -WS1 1.0 GPF 1.5 GPF Rev. B Date: 11/2/10 Dwg. No. 200027 Product No. ZER6003PL-CPM ENGINEERING SPECIFICATION: ZURN ZER6003PL-CPM AquaSense Exposed Urinal Flush Valve - Exposed, quiet diaphragm-type, chrome plated, flushometer with a polished exterior. Complete with chloramine resistant, dual seal dia-phragm with a clog resistant by-pass. The valve incorporates a 6VDC motor actuator, a battery powered automatic sensor, high impact resistant polycarbonate housing and chrome plated metal cover with manual override push button and 10 degree angled sensor, high back pressure vacuum breaker, one piece hex coupling nut, adjustable tailpiece, spud coupling and flange for top spud connection. The AquaFlush® Plus is also
fur-nished with a sweat solder kit, vandal resistant stop cap, and cast wall flange with set screw. Control stop has internal siphon-guard protection. Internal seals are made of chloram-ine resistant materials.
AquaSense
®Model
TAG
®The information contained in this document is subject to change without notice. Please contact Zurn for most up to date information.
Page No. 31
SECTION NAME:
MS-1
ITEMS CONTAINED IN SECTION:
