KAT Walk C PiSystem Adapter Owner s Manual

KAT Walk C PiSystem Adapter

Owner’s Manual

Thank you for purchasing

Contact Information

First Use Instructions

FAQs

First and Foremost Declaration

Safety and Health Cautions

04 05 06

Product Introduction

INDEX

Foreword

The owner’s manual contains all the information you need to install the KAT Walk C PiSystem Adapter. The following symbols are used to indicate crucial information and instructions for the set-up process:

First and Foremost

This symbol is a hint, letting you know what might be helpful at that particular point. This symbol is important: you must complete one or more of installations or settings as described in the manual.

This symbol is a safety warning to remind you to be wary of your personal safety while performing the task, be mindful of this symbol to avert any potential risks.

This symbol is a precaution: it usually provides additional information to help with a task, as well as information that applies only to certain situations.

Declaration

For the latest information, please feel free to check out our official website: http://www.kat-vr.com/

It is the trademark of Hangzhou Virtual and Reality Technology Co., Ltd. All trademarks, product identification and trade names of other companies appearing in this manual are owned by their respective owners. No parts or content of this manual may be copied or reproduced without the written permission of the company, and may not be shared in any form or used for any commercial or profitable purpose.

The contents of this manual are subject to change due to product upgrades or other reasons. Our company reserves the right to modify the contents of this manual without any notice or prompt. This manual is intended as a guide only. We do our best to provide accurate informa-tion in this manual, but we do not guarantee that the contents of the manual are completely error free. All statements, information, and recommendations in this manual do not constitute any warranty, express or implied.

This adapter is intended for use by people aged 14 to 60 years; if you do not meet the age requirement, please do not use it.

Please use this adapter according to proper instructions or under the guidance of a profes-sional to avoid damage. During its use by a minor, a guardian should always be present.

Choking hazard: Do not leave small components that pose a suffocation hazard to children or pets where they can reach.

Keep the adapter safely away from liquids or containers holding liquids.

Do not insert items into any openings on the adapter.

Do not place the adapter near fire or heat sources, nor try to leave it directly exposed to the sun.

Be sure to read and follow all product instructions and warnings related to your VR omni-directional platform and VR headset of choice.

If you violate the above cautions or carry out other violations, it may cause personal injury or adverse consequences, and KAT VR will not be responsible.

Those who use this adapter are considered to have full capacity of civil conduct and have complied with the aforementioned matters.

Safety and Health Cautions

To avoid injury or damage to the product, read and follow all installation and operation instructions before using the KAT Walk C PiSystem Adapter. If it is improperly used, potential risks may be triggered.

07

Product Introduction

Product Description

KAT Walk C PiSystem Adapter is a specialized adapter developed by KAT VR. It can synchronize the motion in the VR headset with the actual movement by its user.

Product Parameters

Adapter size Adapter weight Adapter power USB ports Micro USB cable Mini USB cable

95*70mm 165g 2.5w 4 x USB 2.0 ports 5m 1m Power cord spec

Work temperature 5V/2.5A 5V/2.5A USB Ports Power Port PS4 Port _mini

USB Cable USB Cablemicro Power cord

2 1

Please finish the KAT Walk C pairing in KAT Gateway at your PC before

con-necting the adapter.

2 1

01

Take out the KAT Walk C PiSystem Adapter and three cables.

02

Locate the mini USB cable (PS4 connecting cable) labeled with the sticker 1 and connect

09

2

2

03

Locate the micro USB cable (controller cable) labeled with the sticker 2 and connect it to the USB port of the PiSystem Adapter as sown in the picture.

04

Then, connect the same micro USB cabel to the dualshock 4 controller.

06

Locate the power cord labeled with “switch” sticker and connect it to the power port shown in the picture.

2

05

Locate the USB cable of the KAT Walk C and connect it to the PiSystem adapter as shown in the picture.

First Use Instructions

2

1

07

complete the connection as shown in the picture.

01

Wait one or two minutes for the KAT Walk C PiSystem adapter to start.

1-2 min

02 _{Before connecting the controller, make sure}

that the related equipment is turned on. Them, stand straight on the KAT Walk C walking platform. Keep your feet together and press the PS button on the Dualshock4 controller.

11

Before playing PSVR games that require the use of Dualshock4 controller, make sure that the controller cable is well organized and connected to the adapter. You can organize and connect the controller cable in the same way you connected the headset.

Before use of the device, please check if any of the cables is twisted. If needed, manually straighten them to avoid damage.

Go back to the STEP 6 and repeat the process.

03

If the process has not been succesfully com-pleted, disconnect the power cord and wait for five seconds.

E-mail： [email protected]

Q

I’ve finished connecting all the cables but why doesn’t the button on the

controller work?

Please press the PS button for adapting and pairing. If there is no response, please replug the power cord and restart the KAT Walk C PiSystem Adapter.

A

Q

What should I do when the controller cable accidentally disconnects during

gaming?

Reconnect the controller cable to KAT Walk C PiSystem Adapter and press the PS button for adapt-ing. If there is no response, please replug the power cord and restart the KAT Walk C PiSystem-Adapter.

A

Q

What if the controller still doesn’t work after I restart PS4?

Every time you start PS4, please replug the power cord and restart the KAT Walk C PiSystem Adapter.

A

There might be some non-scheduled updates for FAQs, please visit: http://katvr.com/knowledge.html#supportwz for more information.

FAQs

Contact Information

Company： Hangzhou Virtual and Reality Technology Co., Ltd

Room 901, Building 6, No 1818-2, West WenYi Road, Yuhang Street , Yuhang District, Hangzhou, Zhejiang Province, China.

Add：