• No results found

Designed to last. MaxiSpeed FROM MAXIMUM PAYLOAD TO MAXIMUM VOLUME CLASSIC EASY LIFTOP COILER

N/A
N/A
Protected

Academic year: 2022

Share "Designed to last. MaxiSpeed FROM MAXIMUM PAYLOAD TO MAXIMUM VOLUME CLASSIC EASY LIFTOP COILER"

Copied!
12
0
0

Loading.... (view fulltext now)

Full text

(1)

MaxiSpeed

CLASSIC EASY LIFTOP COILER

FROM MAXIMUM PAYLOAD TO MAXIMUM VOLUME

Designed to last

(2)

The MaxiSpeed curtainsider represents the ideal answer to the logistical and just in time obligations: ease of loading and discharging, reduction of idle time, increasing productivity. The MaxiSpeed range offers transport solutions from maximum payload to maximum volume:

CLASSIC, Economical multi purpose.

EASY, Polyvalent with variable heights.

LIFTOP, For more loading height.

COILER, Dedicated to steel products.

MaxiSpeed Range

Fully welded platform structure with I-beam cross bearers at a pitch of 400 mm Running gear, the top technology from

the major axle manufacturers Total protection of the rear by large

galvanised buffers

(3)

ROBUST

Laminated hardwood floor 35 mm thick

with steel omega profiles Reinforced and corrugated front wall in steel or in aluminium

Side posts in high tensile steel strongly locked onto the siderave

The requirements of the transporters have largely changed these last years and have reverted back to a requirement of robustness, with no premature wear and risk of standstill of the trailers. With vehicles exploited full time, immobilisations are extremely costly.

Since always, FRUEHAUF designs and manufactures vehicles of which the robustness is highly appreciated in the market. Our fully welded chassis frames, our sturdy floors and our strong body design are perfectly adapted to intensive and heavy duty use.

Designed to last

(4)

SAFETY OF THE OPERATORS :

Adjustment to dock level

from inside the trailer Automatic actioning of

the parking brake Universal lashing system Safe release of stanchions under pressure M&B Inside ®

Raise and Lower command inside

SafeParking ®

Automatic parking brake

MultiFix ®

Multiple lashing positions in the

side raves Stanchion safety release

The FRUEHAUF style

To design vehicles adapted to the requirements of our clients also means to propose vehicles which can please from an aesthetical viewpoint.

The FRUEHAUF style has always integrated the aesthetics in the design and manufacturing of its products.

MaxiSpeed Range SAFETY

The MaxiSpeed range has been designed for maximum safety around two major aspects : • Safety of the operators in touch with the vehicle, by the ergonomics of the compo- nents and adapted equipment.

• Safety in road behaviour by the integration of electronic driver assistance systems, increasing the passive and active safety of the vehicle.

SAFETY IN ROAD BEHAVIOR :

Electronic operated brakes and stability

system

Protection against

reversing accidents Maintains tyres auto- matically at the correct

pressure

Monitors tyre pressure and temperature EBS & SAS

Electronic Braking System RCP ®

Reverse Collision Protection

APCS ®

Automatic Pressure Control System

TPMS ®

Tyre Pressure and temperature Monitoring System

(5)

ADAPTABILITY

FLOOR :

FROM TRADITIONAL TILL MOST DEMANDING

Mixed aluminium/wood for maximum payload

Solid hardwood planks Steel omega profiles resistant against punching

Laminated 35 mm Hardwood

Steel omega profiles

FRONTWALL :

THE CHOICE OF AESTHETICS AND TYPE OF USE

Corrugated steel or aluminium

Smooth plywood

Adjustable

SIDE CURTAINS:

FROM 900 gr/m2 CURTAINS TILL REINFORCED SIDE WALL

WITH DROP SIDES Curtain in 900 gr/m2 Drop sides

Anti theft reinforced curtain with reinforced side

From side loading of light weight products, to frequent loading with heavy forklift trucks on the floor : the diversity of these types of transport requires perfectly adapted trailers.

A single standard model can not optimally fulfil both requirements.

Fruehauf proposes thus in standard several alternatives for floor, front wall and side walls.

(6)

The easy handling and the speedy and safe opening and closing make the MaxiSpeed CLASSIC largely multipurpose and perfectly suitable for all traditional types of transports : Industrial supplies, Long distance, Groupage and Distribution.

C L A S S I C

ECONOMICAL MULTI PURPOSE

7 MODELS FROM 2700 TO 2900 MM

SIDE ACCESS HEIGHT / NECK THICKNESS

EUROTRAILER – Coupling height 1100 mm MAXITRAILER – Coupling height 1000 / 1050 MEGATRAILER – Coupling height 950 mm

2700 / 150 mm 2750 / 150 mm

2900 / 90 mm

2750 / 120 mm 2800 / 120 mm

2800 / 90 mm 2850 / 90 mm

(7)

ECONOMICAL MULTI PURPOSE THE POLYVALENT CURTAINSIDER

1 POLYVALENT MODEL - MULTIPLE COUPLING HEIIGHTS

SIDE ACCESS HEIGHT / CHASSIS NECK THICKNESS

EUROTRAILER – Coupling 1100 mm MAXITRAILER – Coupling 1000 / 1050 mm MEGATRAILER – Coupling 950 mm

FRONT 2750 to 3050 / 90 mm FRONT 2800 to 3050 / 90 mm FRONT 2900 to 3050 / 90 mm REAR 2900 to 3050 mm REAR 2900 to 3050 mm REAR 2900 to 3050 mm

E A S Y

Multiple coupling heights Fixed height alu doors Height adjustable roof

Liftable roof for loading

The MaxiSpeed EASY is the solution for a large variety of cargo flows, from the maxi-volume of the automotive industry to the maxi-weight of full trailer loads.

Height adjustable from 2,75m to 3,05m on the front wall and from 2,90m to 3,05m at the rear, within the European 4m overall height.

(8)

L I F T O P

The mechanical roof lifting system allows to increase the side access height for loads with large heights, in total safety and within the 4 meters overall height.

VOLUMINOUS TRANSPORTS FOR THE AUTOMOTIVE INDUSTRY

2 MODELS FROM 2850 TO 3000 MM Single or dual ride height

SIDE ACCESS HEIGHT / NECK THICKNESS

MAXITRAILER – Coupling height 1000 / 1050 mm MEGATRAILER – Coupling height 950 mm

2850 / 150 mm 2950 / 90 mm

2900 / 90 mm 3000 / 90 mm

Lifting handle in each corner

2 height positions 4 meters and + 50 mm

Roof thickness of 45 mm over the full internal width

Sliding side post with spring compensation

(9)

C O I L E R

MAXIMUM PAYLOAD

The rigidity of the chassis needed for transport of coils is assured by the use of high tensile steels.

INTERNAL HEIGHT MAINTAINED

The chassis neck thickness allows a standard side-access height, com- patible with most current palletised freight.

PERFORMANCE IN STEEL PRODUCTS TRANSPORT

Transport of steel products is regulated by extremely severe safety and product protection rules. The MaxiSpeed COILER fulfils all these requirements while guaranteeing optimal productivity for industrial loads.

Coil well with 35° angle Anti roll over

stanchions

7 pairs of lashing rings around the coil well

6,5 tons capacity Strong and light weight

coil well covers

(10)

Functional and practical options

Numerous optional accessories can be integrated in our vehicles to make usage easier or to adapt these to specific operational needs :

• Storage of the different accessories

• Securing of the freight

• Protection and additional reinforcements

• Handling of the freight

Plank box in rear

Rein- forced coupling plate Protection of doorlocks

Additional threshold plate

Doos with exte- rior lockrods

STORAGE MEANS

Pallet box

Toolbox

Transversal box

Document holder Sideplank storage rack

REINFORCED PROTECTION

(11)

Functional and practical options

SAFETY OF THE CARGO

Side planks with cargo securing rail

80 x 40 Stanchion pockets and stanchions

Drop sides

lift axle Intégral Open Top

Load length indication Spare wheel carrier

Universal cargo

securing ring Pallet retainer strip

TUV certification

ADDITIONAL EQUIPMENT

Brake pad wear indicators MultiFix side raves

Carry on forklift truck Retractable taillift Info Centre

(12)

Services

24 à 28, avenue Jean Mermoz - BP 209 - 89002 AUXERRE CEDEX - FRANCE Tél. : + 33 (0) 3 86 94 42 42 - Fax : + 33 (0) 3 86 48 32 11

[email protected] - www.fruehauf.com

Your Fruehauf contact person

FINANCING

In close partnership with the larger finance institutions, our specialised Department will recommend the financing method adapted to your needs:

Hire-purchase, Conventional credit, Financial lease or Operational lease.

www.fruehauf.com/financement

Maintenance, repair, spare parts, used trailers and finance: FRUEHAUF assures you professional assistance and performing services.

MAINTENANCE REPAIRS

500 Service Centres

in E urope

Our network of 500 Service Centres in Europe gives you quick and efficient service on all types of vehicles in your vicinity.

To locate your nearest Service Centre:

www.fruehauf.com/centres-service

SPARE PARTS

The Spare Parts Department guarantees the supply of original manufacturers components, wear parts immediately available from your local Service Point, delivery within 24 hours of specific parts. Identification and ordering on line of all parts for vehicles up to 15 years old.

www.fruehauf.com/servicepro

USED VEHICLES

The used vehicle Department offers a wide choice of vehicles and the professionalism of a leader: complete information on the status of the vehicle, a procedure of intake control covering 30 points (chassis, tyres, brakes, suspension, body) , a specialised workshop to adapt the vehicle to your needs, an on-line offer.

www.fruehauf.com/occasions

Designed to last

Non binding document. Printed on paper from sustainably managed forests. Visual © Fotolia.

References

Related documents

CSC: cancer stem cells; DCIS: ductal carcinoma in situ; DMEM: Dulbecco ’s modified Eagle ’s medium; EGFR: epidermal growth factor receptor; EMT: epithelial to mesenchymal

Table 4: Simulated Effects of Observed Changes in Contextual Variables Proportion of Childhood lived with the biological mother and: Married biological father Cohabiting

Good governance requires pathology services to integrate their quality management systems with those of their NHS host organisation, reporting on relevant measures that provide

b) Nearly 40% of Elis Portugal's sales outside of textile rental services, therefore only the revenues for the textile rental services market are included in the share calculation.

The discounted cash flow (DCF) method is regarded as the most appropriate valuation method for mining operations or projects where the mineral reserve is well defined and

High temperature pulse-echo contact measurements are performed up to 260C which is the hot stand by temperature for liquid metal cooled reactors, to study the performance of

[2006] used this method to compute the yield curve associated with a random isotropic geometry of floes and applied it in Arctic Basin scale simu- lations, showing that this