Price

Miscellaneous Philippine Construction Materials as of September 2014 Prices in Philippine Pesos

DESCRIPTION UNIT UNIT COST

EARTHWORKS

Soil Poisoning s.m. 116

Gravel bed cu.m 1,097.00

CONCRETE WORKS

Portland Bags 271

1" Dia. Crush gravel cu.m 1,271.00

3/4" Dia. Crush Gravel cu.m 1,097.00

White Sand cu.m 982

REBARS

16 mm Dia. deformed bars kgs 44

12 mm Dia. deformed bars kgs 44

10 mm Dia. deformed bars kgs 44

Steel Deck s.m 473

Tie Wire ga. 16 rolls 2,541.00

FORMWORKS & SCAFFOLDINGS

Scaffolding and Shoring s.m 173

Footing Tie Beam s.m 173

Suspended slab s.m 231

Stairs s.m 347

PLUMBING WORKS

Water Supply Pipes (PPR) 69

25mm dia. length 687

25mm dia. elbow (90 deg.) pcs 55

20mm dia. threaded elbow (90 deg.) pcs 263

25mm dia. tee pcs 61

25x20mm dia. tee reducer pcs 50

20mm dia. threaded tee pcs 312

25mm dia. coupling pcs 40

20mm dia. coupling pcs 28

25x20mm dia. coupling reducer pcs 42

25mm dia. end cap pcs 44

20mm dia. end cap pcs 36

25mm dia. gate valve pcs 866

25mm dia. check valve pcs 788 Sewer & Drainage Line

PVC Pipes - S1000 50mmØ x 3m long pcs 404 75mmØ x 3m long pcs 866 100mmØ x 3m long pcs 1,155.00 PVC Elbow (1/4 bend) 50mmØ. pcs 40 75mmØ. pcs 69 100mmØ. pcs 104 PVC Elbow (1/8 bend) 50mmØ. pcs 40 75mmØ. pcs 69 100mmØ. pcs 104 PVC Wye 50mmØ. pcs 98 75mmØ pcs 144 100mmØ pcs 217 100 x 50mmØ pcs 179 PVC Tee 50mmØ. pcs 64 75mmØ. pcs 144 PVC P-trap 50mmØ. pcs 144 Consumables lot 5,775.00 PVC Pipe 20mm.dia. length 133 25mm.dia. length 200 50mm.dia. length 400 RSC Pipe 40mm.dia. length 1,432.00 Conduit Fittings PVC Coupling 20mm dia. pcs. 5 PVC Coupling 25mm dia. pcs. 8 PVC Coupling 50mm dia. pcs. 24 RSC Coupling 40mm dia. pcs. 74 PVC Adopter 20mm dia. pcs. 8

PVC Adopter 25mm dia. pcs. 11 PVC Adopter 50mm dia. pcs. 23 PVC Elbow 50mm dia. pcs. 71 RSC Elbow 40mm dia. pcs. 235 Locknut 15mm dia. pcs. 6 Locknut 20mm dia. 8 Locknut 40mm dia. 24 L&B 40mm dia. 107

Entrance cup 25mm dia. 360

Entrance cup 40mm dia. 490

WIRES AND CABLES

2.0 sq.mm. THHN l.m. 31

3.5 sq.mm. THHN l.m. 45

5.5 sq.mm. THHN l.m. 69

30.0 sq.mm. THHN l.m. 383

38.0 sq.mm. THHN l.m. 556

PANEL BOARS, CIRCUIT BREAKERS

Panel PP = Main : 125AT/225AF, 2P: 17-20AT, 2P set 4,515.00

Circuit breaker gutter in Nema 3R enclosure: 1-125AT, 2P set 11,637.00 WIRING DEVICES & ACCESSORIES

One gang switch set 301

Two gang switch set 435

Three gang switch set 569

Duplex outlet set 648

Range outlet set 1,650.00

Ref outlet set 447

ACU outlet set 586

Washing Machine outlet set 447

UTILITY BOXES, PULLBOXES, FITTING SUPPORT

Lighting fixtures set 144

Miscellaneous Philippine Construction Materials as of September 2010 Prices in Philippine Pesos

Portland Cement, Republic Sand

Earth Fill Soil Treatment CHB 100x200x400mm, 150x200x400mm, 200x200x400mm, Rebars 10mm x 6m 12mm x 6m 16mm x 6m

#16 G.I Wire For Tying

Common Wire Nails 50mm (2") 75mm (3")

100mm(4")

Concrete Nails, 75mm (2") Concrete Nails, 75mm (3")

Formworks, Staging & Scaffoldings 1/4" x 4' x 8' Ord. Plywood

2" X 2" X 10' Coco Lumber 2" X 3" X 10' Coco Lumber

(Consumable) Nylon Chord, Chalk stone etc.. Finishing Materials

Decorative stone finish, wainscoating Glass Block

Counter tops

PLUMBING WORKS

Water line (for Roughing Items) 3/4" Ø PVC Blue Pipe

1/2" Ø PVC Blue Pipe 3/4" Ø PVC Blue Elbow 1/2" Ø PVC Blue Elbow

1/2" Ø PVC Blue Elbow (Threaded) 3/4" x 1/2" Ø PVC Blue Tee

1/2" Ø PVC Blue Tee (Threaded) 1/2" Ø PVC Blue Cap

3/4" Ø PVC Blue Union 3/4" Ø G.I. Check Valve 3/4" Ø G.I. Gate Valve 3/4" Water Meter Solvent (Neltex) Teflon tape

Water Line (For Finishing fixture items) Kitchen Sink

Kitchen Sink Faucet Kithcen Sink Supply Hose Kitchen Sink Angle Valve Lavatory, self-rimming Lavatory Faucet Lavatory Supply Hose Lavatory Angle Valve

Shower Set/s Shower Valve Shower Faucet

Service Area Sink Faucet Garage Hose Bibb Bathtub

Water Closet

Water Closet Supply hose Water Closet Angle Valve Soap holder

Tissue holder Mirror & Frame

Shower Rod (Curtain Enclosure) Shower Rod (Towels)

Water Tank 1hp Motor pump Overhead Tank

Storm drainage & Downspout (For Roughing items) 3" Ø PVC Pipe (DS) 3" Ø PVC 1/4 Bend Elbow (DS) 4" Ø PVC Pipe (Drainage) 2" Ø PVC Pipe 2" Ø PVC 1/4 Bend Elbow 3" x 2" Ø PVC Tee

Epoxy (Pioneer A&B)

Sanitary Line (For Roughing Items) 2" Ø PVC Pipe 3" Ø PVC Pipe 4" Ø PVC Pipe 4" x 2" Ø PVC Tee 2" Ø PVC 1/4 Bend Elbow 2" Ø PVC U-Type 4" Ø PVC 1/4 Bend Elbow 4" Ø PVC Clean Out 3" Ø PVC 1/8 Bend Elbow 4" x 3" PVC Ø Wye 2" Ø PVC P-Trap 2" Ø PVC Tee 4" x 2" Ø PVC Reducer 4" Ø PVC Wye 4" Ø PVC 1/8 Bend 4" x 2" PVC Wye 2" Ø PVC 1/8 Bend 4" Ø Tee

Solvent (Neltex brand) Epoxy (Pioneer A&B) ELECTRICAL WORKS Private Pole

Entrance Cap - 25mm Ø (1")

Conduit Clamp For 25mm RSC Metal Locknut w/ Bushing Automatic Circuit Breaker

100A Main Switch w/ 12 Branch Circuit RSC Elbow - 90° Longbend, 25mm Ø RSC Coupling - 25mm Ø

Neltex Electric Wire protection, Orange 3/4" Ø PVC Orange pipe

1/2" Ø PVC Orange pipe

3/4" Ø PVC Orange Longbend Elbow 1/2" Ø PVC Orange Longbend Elbow 38mm x 100mm x 54mm, PVC Utility Box 100mm x 100mm x 54mm, PVC Junction Box PVC Splice Box

Solvent (Neltex)

Electric Wire, Phelps-Dodge, THHN Electric Wire, (3.5mm²) For C.O. Electric Wire, (2.0mm²) For L.O.

Electric Wire, (8.0mm²) For Service Entrance Telephone & Television Cable

Wiring Devices

Plate Assemble For Single-Gang Switch Plate Assemble For Two-Gang Switch Plate Assemble For Three-Gang Switch Wall Switch Module, 5A, 250V, AC Three-Way Switch Module, 5A, 250V, AC Duplex Convenient Outlets

Range outlet W/ Cover plate, 3-Prongs AC W/ Cover plate, 3-Prongs

Telephone Outlet Television Outlet Electric Wire Tape Plastic Lamp Receptacle Utility Box, Deep Type (Painted)

Octagonal Box, Deep Type w/ cover (painted) Lighting Devices

Incandescent Lamp Pin lights

T-5

Circular Lamp & Cover DOORS AND WINDOWS

2.10 x 1.0 Tanguile Panel Door and 2"x6" Jamb (D-1) 2.10 x 0.8 Tanguile Panel Door and 2"x6" Jamb (D-2) 2.10 x 0.8 Tanguile Panel Door and 2"x6" Jamb (D-3) 2.10 x 0.8 Tanguile Sliding Door and 2"x8" Jamb (D-4) 2.10 x 0.8 Tanguile Panel Door and 2"x6" Jamb (D-5) 2.10 x 0.8 Tanguile Panel Door and 2"x6" Jamb (D-6)

2.10 x 1.8 Alum. Pwder. Coat Sliding Door (D-7) 2.10 x 2.55 Alum. Pwder. Coat Sliding Door (D-8) 1.75 x 0.5 Alum. Pwdr. Coated Slide-up Window (W-1) 0.5 x 1.25 Alum. Pwdr. Coated Sliding Window (W-2) 1.2 x 1.35 Alum. Pwdr. Coated Sliding Window (W-3) 1.2 x 1.15 & 1.2 x 0.35 Alum. Pwdr. Coated Sliding 1.2 x 1.2 Pwdr. Coated Fixed Window (W-4)

1.2 x 1.50 Alum. Pwdr. Coated Sliding Window (W-5) .05 x 1.0 Alum. Pwdr. Coated Sliding Window (W-6) 1.2 x 1.7 Alum. Pwdr. Coated Sliding Window (W-7) 1.2 x 2.0 Alum. Pwdr. Coated Sliding Window (W-8) 0.5 x 0.6 Alum. Pwdr. Coated Awning Window (W-9) TILING AND CLADDING

300 x 300 Floor Bathroom Homogenous Tiles 400 x 400 Floor Bathroom Homogenous Tiles 300 x 300 Wall Bathroom Homogenous Tiles 400 x 400 Floor Room Homogenous Tiles 5mm Tile Trim

Tile Grout

Tile Adhesive (ABC Brand) No. 10 Pebble washout finish 300mm x 300mm vinyl tiles

300mm x 300mm non-skid floor tiles

ROOF FRAMING, SHEETING, GUTTER AND STEEL WORKS Tile Roof 2" x 2" x 3/16 Angular (4.5mm thk) 2" x 2" x 3/16 Angular (4mm thk) 2" x 2" x 3/16 Angular (3.5mm thk) 1-1/2" x 3/16 Angular (4mm thk) 1-1/2" x 3/16 Angular (4mm thk) 1-1/2" x 3/16 Angular (3.5mm thk) C- Purlins 2"x6" Cee Purlins 2"x4" Cee Purlins (1.5mm thk) 2"x4" Cee Purlins (1.9mm thk) 2"x3" Cee Purlins 1" x 1" x 1.5 Tubular 2" x 2" x 1.5 Tubular 2" X 3" x 1.5 Tubular Hinges Welding Rod Grinding Wheel Grinding Wheel Inside Gutter HARDWARE

Concealed Hinges-Full Lap Concealed Hinges-Half Lap Main door Knob with Dead Bolt

Round Hand Door Knob Door Hinges

Closet Cabinet Door Handle Kitchen Cabinet Door Handle

CEILING METAL FRAMING AND BOARDS 10mm Plyboard (Boral)

25mm Angle x 25mm x 0.60mm x 2.44m 25mm Angle x 25mm x 0.60mm x 3.55m Furring Channel Double 50mm x 19mm x 5m Furring Clip Double

Carrying Channel 38mm x 12mm x 5.00m Screw Gypsum 6 x 50mm Needle Point Blind Rivets 1/6" x 3/8" Streaker Graber 7 x 1 Cabinet Works 1/4" Marine Plywood 3/4" Marine Plyboard 1/2" x 1" Plyboard Casing 1" Finishing Nail 2" Finishing Nail Stikwell

Cabinet Pull, 4*, ordinary Wood cornices

Wooden base boards Wood louvers

PAINTING Flat Latex (white)

Semi-Gloss Latex (White Flexibond

Primer Oxide

Plasolux Glazing Putty Patching Compound Paint Thinner Lacquer Thinner

Black Quick Dry Enamel Concrete Neutralizer Trim Roller #7 Heavy Duty Permacoat Flat Latex Boysen Flatwall Enamel Paint, White Quick Drying Enamel, White Exterior Wood Primer and Sealer Interior Wood Primer and Sealer Oil Tinting Colors: Green Yellow

Brown Black

Primer Thinner

Acrylic Semi-Gloss Latex Paint Acrylic Concrete Primer Sealer Acrylic Tinting Colors: Brown Yellow

Dead Flat Lacquer Lacquer Primer Surfacer Wood Filler Paste 2" Nylon Brush 4" Nylon Brush Sand Paper # 120 Sand Paper # 80

QUANTITIES OF MATERIALS PER CUBIC

METRE OF CONCRETE

Quantity of materials such as cement, sand, coarse aggregates and water required per cubic meter of concrete and mortar varies with the mix design of the concrete and mortar respectively. Following table gives the estimated quantity of materials required per cubic meter of mortar and concrete for various nominal mixes.

NOMINAL MIX WAT

ER CEM ENT RATI O WAT ER PER 50K G BAG OF CEM ENT CEMENT SAN D (CU M) CRUS HED STON ES (CUM ) CEM ENT F.A . C. A. BY WEI GHT (KG) BY NUM BER OF BAGS 1 1 – 0.25 12.5 1015 20.3 0.71 0 – 1 1.5 0.28 14 815 16.3 0.85 5 – 1 2 – 0.3 15 687 13.74 0.96 3 – 1 2.5 – 0.35 17.5 585 11.7 1.02 3

1 3 – 0.4 20 505 10.1 1.06 – 1 4 – 0.53 26.5 395 7.9 1.10 6 – 1 6 – 0.7 35 285 5.7 1.19 7 – 1 8 – 0.9 45 220 4.4 1.23 2 – 1 1 2 0.3 15 560 11.2 0.39 2 0.784 1 2 2 0.42 21 430 8.6 0.60 2 0.602 1 1.5 3 0.42 21 395 7.9 0.41 4 0.828 1 1.6 6 3.3 3 0.48 24 363 7.26 0.41 9 0.838 1 2 3 0.5 25 385 7.7 0.53 9 0.808 1 2 3.5 0.53 26.5 330 6.6 0.46 2 0.808

1 2 4 0.55 27.5 310 6.2 0.43 4 0.868 1 2.5 3.5 0.57 28.5 305 6.1 0.53 4 0.748 1 2.5 4 0.6 30 285 5.7 0.49 9 0.798 1 3 4 0.65 32.5 265 5.3 0.55 6 0.742 1 2.5 5 0.65 32.5 255 5.1 0.44 6 0.892 1 3 5 0.69 34.5 240 4.8 0.50 4 0.84 1 3 6 0.75 37.5 215 4.3 0.45 2 0.904 1 4 8 0.95 47.5 165 3.3 0.46 2 0.924

Estimation of Cement, Sand, and Gravel in

Construction

In the estimation of cement, sand, and gravel volumes for concrete proportioning, we use the Fuller's Formula. This is an easy way to get a rough estimate in case you are in the field.

FULLER'S FORMULA

Let:

C = number of bags of cement per cubic meter of concrete work (bag/m3)

S = volume of sand per cubic meter of concrete work (m3 of sand/m3)

G = volume of gravel per cubic meter of concrete work (m3 of gravel /m3)

c,s,g = cement-sand-gravel ratio (relative amounts of solids by volume in a mixture)

C = 55 / (c+s+g) S = 0.028*C*s G = 0.028*C*g

The classes of concrete mixture depends on the cement-sand-gravel ratio (c:s:g).

Class A (1:2:4) = for beams, slabs, columns, all members subjected to bending Class B (1:2.5:5) = member not reinforced for bending stress

Class C (1:3:6) = for footing (not under water)

Note: We use here 94 lbs Portland Cement per cubic meter of concrete

Determine the number of bags of cement, sand, and gravel of a proposed concrete pavement whose width and length are 100 m x 200 m. The thickness is 100 cm.

Given: Width = 100 m Length = 200 m Thickness = 0.1 m

Reqd: number of bags of cement, sand, and gravel

Solution: Volume of concrete = 100 * 200 * 0.1 = 2000 m3 Pavement = Class A (1:2:4) C = 55 / (c+s+g) = [ 55 / (1+2+4) ] * 2000 = 15,680 bags S = 0.028*C*s = {0.028* [ 55 / (1+2+4) ] * 2 } * 2000 = 800 m3 of sand G = 0.028*C*g = {0.028* [ 55 / (1+2+4) ] * 4 } * 2000 = 1760 m3 of sand

Reclaimed Timber Prices

“Came indoors and was in heaven with all the wood you have” All prices include VAT

This is a price guide to timber you might find for sale. There is no guarantee that the timber sizes you require will be in stock – phone first if you are travelling for something specific..

Timber – £ per metre

 Softwood

 Minimum 60p per metre

 Planed / Tanalised +10%

 Lengths less than 1m 50% discount

 Hardwood – CSA(inches) (£22 per cubic foot)

 Minimum 60p per metre

Size 1×1 1×2 1×4 1×6 2×2 2×3

2×4 2×5 2×6 2×7 2×8 2×9 2×10 3×3 3×4 4×4

Sheet Materials

PLY - Normal / Shuttering

PLY - Normal / Shuttering

PLY - Normal / Shuttering

PLY – High Quality

PLY – High Quality

PLY – High Quality

OSB OSB OSB Hardboard Faced Hardboard MDF

MDF MDF

Scaffold Boards

Pallets

Pallet Slats

Cutting

 We can cut clean timber up to 50mm x 250mm (2”x10”) in size for 50p per cut – usually while-you-wait

 We can cut clean sheet material for £1 per cut – usually takes a couple of days

 You are of course welcome to borrow a hand saw for free, once you have paid for your wood – to cut up the timber to fit into your car!

1 British Pound equals

66.50 Philippine Peso

BOYSEN

Permacoat™ Latex

DESCRIPTION: BOYSEN® Permacoat™ Latex

Paint is a 100% acrylic latex paint with excellent hiding, durability and dirt pick-up resistance. It finishes painting jobs in less coats, yet lasts longer than other brands allowing you to save a

lot on time, effort, worry and money.

PRINCIPAL USES: For interior and exterior

such as concrete, stucco, bricks plaster, hollow blocks, drywall surfaces, and properly primed wood.

PRACTICAL COVERAGE: 25-30 square meter /

4 liters / coat

SURFACE DRY: Thirty (30) minutes DRY THROUGH: Two (2) hours

DRY FILM THICKNESS: 1-1.5 mils/coat OVERCOATING INTERVAL: Allow one hour

before recoating.

THINNING: Use as supplied. If necessary, thin

with not more than ½ liter of water per 4-liter can

APPLICATION: paint brush, roller or airless

spray.

PACKAGING: 16-liter; 4-liter and 1-liter cans

(white only) AVAILABLE COLORS: B701 White B702 Off White B721 Cream B723 Moonlight B725 Bone Ivory B771 Tile Red B780 Chocolate Brown

COLORANTS: Use only BOYSEN® Latex Colors

for tinting to achieve pastel shades. To produce dark shades, use factory or Mix and Match™ pre-mixed colors. Do not use Hansa Yellow B-1466 and Toluidine Red B1407 for exterior applications.

SURFACE PREPARATION:

Please refer to CHOOSE YOUR PAINT section for specifics.

1st Coat: BOYSEN® Permacoat™ Flat Latex #701

Putty:

BOYSEN® Masonry Putty #7311 (interior use)

BOYSEN® Acrytex Cast™ #1711 (exterior use)

2nd & 3rd Coat: BOYSEN® Permacoat™ Flat Latex (any desired color)

BOYSEN

Masonry Putty #7311

DESCRIPTION: BOYSEN® Masonry Putty

#7311 is a water based product especially prepared for filling minor surface

unevenness while using latex paint systems. Can also be used for full puttying.

PRINCIPAL USES: For interior concrete,

stucco, bricks plaster or any surface minor imperfection.

PRACTICAL COVERAGE:

Full Putty - 10-12 square meter / 4 liters / coat

Spot putty - 25 square meter / 4 liters / coat

SURFACE DRY: Thirty (30) minutes DRY THROUGH: Two (2) hours

OVERCOATING INTERVAL: Allow two

hours before recoating

THINNING: Use as supplied. APPLICATION: putty knife

PAINTING SCHEDULE:

1st Coat: BOYSEN® Permacoat™ Flat Latex #701

Putty: BOYSEN® Masonry Putty #7311

Topcoat: BOYSEN® Permacoat™ Latex (flat, semi-gloss, gloss)

Note: Interior use only. For exterior, use BOYSEN® Acrytex™ Cast #1711

BOYSEN

Acrytex™ Cast #1711

DESCRIPTION: BOYSEN® Acrytex™ Cast

#1711 is an acrylic solvent-based putty for correction of minor surface imperfections

when a plain finish of BOYSEN® Acrytex™

Topcoat is desired. Gives an elegant and durable textured finish when applied with a mortar gun. It is water tight thus can repel water and prevent seepage. Noted for excellent adhesion and long term durability.

PRINCIPAL USES: For new and previously

painted exterior and interior masonry, wood and fiber cement boards. It also acts as a water repellent. Creates a very tight film, serving as a moisture sealant for concrete and a stain inhibitor for wood.

PRACTICAL COVERAGE:

 As putty -- 10-12 sq.m./gal/coat

 As texture -- 5-6 sq.m./gal/coat

APPLICATION: by mortar gun (texture) or

putty knife (putty)

SURFACE DRY: Thirty (30) minutes DRY THROUGH: Two (2) hours

OVERCOATING INTERVAL: Four (4) hours THINNING: Use BOYSEN® Acrytex™

PACKAGING: 4-liter can SURFACE PREPARATION:

Allow new masonry to dry for 14 to 28 days under normal weather conditions before painting. No need to

treat new masonry with BOYSEN® Masonry Neutralizer #44. Surface to be painted should be clean and

dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar. Repainting

For surfaces previously painted with latex, enamel or lacquer coatings, scrape to bare substrate and clean surface thoroughly, then follow schedule for new painting.

PAINTING SCHEDULE:

Plain Finish:

1. Prime bare substrate with BOYSEN® Acrytex™ Primer #1705.

2. Putty minor surface imperfections with BOYSEN® Acrytex™ Cast #1711. Spot prime puttied

areas.

3. Brush on BOYSEN® Acrytex™ Primer #1705 when a high gloss finish on wood is desired.

4. Finish with two (2) coats of BOYSEN® Acrytex™ Topcoat to desired sheen.

Textured Finish:

1. Prime bare substrate with BOYSEN® Acrytex™ Primer # 1705.

2. Spray BOYSEN® Acrytex™ Cast # 1711 with mortar gun. Press Acrytex™ Cast with plain wooden

roller 10-15 minutes after spraying. Wet wooden roller with water to prevent the roller from sticking to the cast.

3. Finish with two (2) coats of BOYSEN® Acrytex™ Topcoat to desired sheen.

BOYSEN 0340 PAINT THINNER 16L

P 1,398.90

BOYSEN

PERMACOAT FLAT LATEX B-701 WHITE 16 LITERS PLASTIC

BOYSEN 1711 ACRYTEX CAST 4L

P 439.60

BOYSEN 7311 MASONRY PUTTY -4L