Name B. Radha Krishnan, M.E., (Ph.D). Designation Assistant Professor
Department Mechanical Engineering Contact no: 9159989767
Mail id: [email protected]
Qualification M.E., (Ph.D).
Area of Specialization Manufacturing Engineering, Soft Computing Approaches for Machining Processes
Teaching Experience 5 Years 1 month Industrial Experience Nil
Research Guidance Nil
Publications International Journal: 16 National Journal: 0
International Conference: 10 National conference: 02 Books: Nil
Project Guidance UG: 12
PG: Nil Ph.D: Nil FDP /WORKSHOP/CONFERENCE Organized: 06
Attended: 06
Out Reach Guest Lecture Given: Nil
As Judge: Nil Other Roles: Nil
Membership In Professional Bodies ISTE (Indian Society for Technical Education) IAENG ( International Association of Engineers )
Certification 02
Accomplished NPTEL Courses 2
Awards & Accolades Awards : 10 Accolades: Nil
EXPERIENCES
Sl. No.
Previous &Current experience
Teaching Industry
Institution Position Years Organization Position Years 1 K.Ramakrishnan College of Engineering,
Trichy Professor Assistant 4 Years
Nil 2 Nadar Saraswathi College of Engineering &
PUBLICATIONS:
INTERNATIONAL JOURNALS:
Research paper published on “Caribbean Journal of Science “(Anna University Annexure -I) in the title of “Effect of Process Parameters on Weld Deposits in Pulsed Gas Metal Arc Welding” at June 2019. ISSN 0008-6452.
Research paper published on “Transactions of the Canadian Society for Mechanical Engineering “(Anna University Annexure -I) in the title of “Influence of Surface Roughness in Turning Process-an Analysis Using Artificial Neural Network” at March 2019. ISSN 0315-8977.
Research paper published on “Applied Mathematics and Information Science “(Anna University Annexure -I) in the title of “Performance Analysis of Surface Roughness modeling using Soft Computing Approaches” at November 2018. ISSN 2325-0399.
TAGA Journal of Graphic Technology;, ISSN: 1748-0345 (Online) / 1748-0345 (Online) published in the title of “Prediction of Surface Roughness in turning process by using artificial neural network model” Vol 14-2018.
International Journal of Mechanical Engineering and Technology (Scopus Indexed);, ISSN Online: 0976-6359 published in the title of “Design and Analysis of Modified Idler in Drag Chain Conveyor”Volume 9, Issue 1, January 2018, pp. 378–387.
Published the paper in “International Journal for Research & Development in Technology” ISSN (O) :- 2349-3585in title of ‘Prediction of Surface Roughness (AISI 4140 Steel) in Cylindrical Grinding Operation by RSM’ in Volume-9,Issue-3(Mar-18).
Published the paper in “International Research Journal of Engineering and Technology” (IRJET); ISSN: 2395-0056, in title of ‘Determination of Surface Roughness in AA6063 Using Response Surface Methodology’ in Volume: 05 Issue: 03, Mar-2018.
Published the paper in“International journal of Mechanical Engineering” ISSN 2348-8360; Special Issue. In the title of ‘Optimization of CNC Machining Parameters for Surface Roughness in Turning of Aluminium 6063 t6 With Response Surface Methodology.
Published the paper in“International journal Of Mechanical Engineering” ISSN 2348-8360; Special Issue. In the title of ‘Optimization of Surface Roughness in CNC Milling Process Using RSM”.
Published the paper in“International journal Of Industrial Engineering & Technology” ISSN (Online):2278-9456; Volume: 3; Issue: 2; Impact Factor (JCC): 4.3729”, in the title of ‘Utilization of Natural Energy’.
Published the paper in “International Journal of Business Management & Research” ISSN (Online):2249-8036; Volume: 3; Issue: 2; Impact Factor (JCC): 4.8712”, in the title of ‘Six Sigma Concept and DMAIC Implementation’.
Published the paper in “International Journal of Mechanical Engineering and Robotics Research” Scopus indexed Journal ISSN 2278 – 0149 Vol. 2, No. 4, October 2013, in the title of“Mechanical Properties of Woven Fabric Basalt/Jute Fibre Reinforced Polymer Hybrid Composites”.
Published the paper in “Intentional Journal Of Innovative Research In Science, Engineering And Technology” {ISSN(Online):2319-8753.ISSN(Print)2347-8753; volume:3; special issue:3, in the title of ‘Effect of Relational Coordination in Health Care System Measuring by Hypothesis and Questionnaire Framework’.
INTERNATIONAL CONFERENCES:
Attended and present the Research Paper in the title of “Performance Analysis of Aluminium Piston Coated by Ceramic Powder” in international conference on New Scientific Creations in Engineering and Technology at Nadar Saraswathi College of Engineering and Technology, Theni (22/03/2019).
Attended and present the Research Paper in the title of “Experimental investigation and analysis of ceramic coated in aluminium piston” International Conference On recent trends in Nano material for Energy, Environment & Engineering Application at K.Ramakrishnan College of Technology , Trichy (March 2019).
Attended International Conference and Paper Presented in the title of ‘Optimization of CNC Machining Parameters for Surface Roughness in Turning of Aluminium 6063 t6 With Response Surface Methodology’ (ICCREST-2017) International Conference on Current Science & Technology (Jayaram College of Engineering and Technology).
Attended International Conference and Paper Presented in the title of ‘Optimization of Surface Roughness In CNC Milling Process Using RSM’ in International Conference on Recent Trends in Engineering, Computers, Information Technology and Applications (PSNA College of Engineering and Technology ) 2017.
Attended International Conference and Paper Presented in the title of ‘Review of Prediction of Surface Roughness in Machine Vision by Using Various Parameters’ in International Conference on Smart Design & Sustainable Development (ACCET-KARAIKUDI) 2017.
International Conference and Paper Presented in the title of “Parameter Identification and Deformation of Al-Cu-Si-Mg-Al2o3 By p/m Process”in International Conference on Innovative Research Techniques in Management Aeronautical Mechanical and Electrical (Kalaignar Karunanithi Institute of Technology, Coimbatore) 2016.
Attended International Conference and Paper Presented in the title of “Parameter Selection for Relational Coordination in Health Care System” in International Conference In Advanced In Industrial Engineering Applications (Anna University Chennai) 2014 .
Attended IEEE International Conference and Paper Presented in the title of ‘Effect of Relational Coordination in Health Care System by measuring Hypothesis and Questionnaire Framework’. In International Journal of Innovative Research In Science, Engineering And Technology. ( KLN College of Engineering and Technology)2014.
Attended International Conference and Paper Presented in the title of“Review of Relational Coordination Issues in Healthcare System” in International Conference on Business Analytics and Intelligence (IIM-BANGLORE) 2013.
Attended International Conference and Paper Presented in the title of “Mechanical Properties of Woven Fabric Basalt/Jute Fibre Reinforced Polymer Hybrid Composites” in First International Conference in Emerging Trends in Engineering and Technology (ICETET 2013).
NATIONAL CONFERENCES:
Attended National Conference and presented paper in the title of “Six Sigma Concept and DMAIC Implementation”on RAMM 2013 conducted by Velammal Engineering College Chennai.
Attended National Conference and presented paper in the title of “WASTE TO ENERGY” on RAME 2013 conducted by P.S.R Engineering College Sivakasi.
FDP/WORKSHOP/CONFERENCE/SEMINAR ORGANIZED:
Organizing the International Conference on New Scientific Creations in Engineering and Technology for the Department of Mechanical Engineering in Nadar Saraswathi College of Engineering and Technology, Theni at 22/03/2019.
Organizing the Tech- Expo in K.Ramakrishnan college of engineering , Trichy at August 2016
Organizing two days work shop in AUTOMOBILE with GOODWIN Motors, Trichy. Organizing the one day training program regarding the NAAC Accreditation work. Organizing the guest lecture for automation current scenario in K.Ramakrishnan college of
Engineering.
FDP/WORKSHOP/CONFERENCE/SEMINAR ATTENDED:
Attended the One Week Online Training Programme on “NBA Accreditation” held on June 2019 in Nadar Saraswathi College of Engineering and Technology, Theni.
Attended the Three days Short Term Training Programme on “Electric Vehicles and Fuel Cells” held on Dec 2018 in Thiagarajar college of Engineering, Madurai.
Attended the One day Training Programme on “Research Methodologies and Teaching Skills” held on June 2018 in Nadar Saraswathi College of Engineering and Technology, Theni.
Attended the one week Short Term Training on “Machine Learning Techniques in Manufacturing Optimization” held on 14 Dec 2017 in Thiagarajar college of Engineering, Madurai.
Attended the two days Training and Workshop on “Recent software used in TCS” held on May-2015 in TCS Campus Siruseri , Chennai.
Attended the two day national level seminar on “CHEMICAL GRAPH THEORY” held on 18th and 19th oct-2012 in Velammal College of Engineering and Technology.
Attended the two days Workshop on “Metrology Measurement and Machine vision system” held on 26th and 17th sep-2016 in PSG College of Technology.
Attended the two days Workshop on “How to do the Research” held on nov-2016 in K.Ramakrishnan College of Engineering.
NPTEL COURSE COMPLETITION:
Successfully completed the NPTEL Course in title of “Inspection and Quality Control in Manufacturing” With Elite Certificate on Apr 2019.
Successfully completed the NPTEL Course in title of “Ethics in engineering practice” With Elite Certificate on Dec 2018.
PROJECT GUIDANCE: UG:
Sl. No. Name of the Project Year
1 Design and Fabrication of Automatic Rubber Tapping machine April 2015 2 Optimization of CNC Machining Parameters for Surface Roughness in Turning of Aluminium 6063 T6 With Response Surface Methodology April 2017 3 Optimization of Surface Roughness in CNC Milling Process Using RSM April 2017 4 Design and Fabrication of Image processing system with MAT lab configuration (Conveyor model for Mass Production) April 2018 5 Determination of surface Roughness (AISI 4140) in Cylindrical Grinding process by RSM and ANN April 2018 6 Prediction of surface Roughness (AL6063) in Turning process by RSM and ANN April 2018
7 Process Parameter optimization in TIG welding By using Taguchi and ANN April 2018 8 Experimental Analysis and investigation of ceramic piston coating April 2019 Design and Fabrication of Off Road Vehicle April 2019 CERTIFICATION:
Certified as ISO Internal Auditor by the private consultancy in Chennai. Certified Master Diploma in Product Design by CADD Center Theni.
AWARDS & ACCOLADES: Awards:
Sl. No. Name of the Subject Pass Percentage Month & Year
1 Mechatronics 98.2% NOV/DEC 2014
2 Manufacturing Technology II 95.7 % APR/MAY 2015
3 Unconventional Machining process 100% APR/MAY 2015
4 Computer Aided Design 98.2% NOV/DEC 2015
5 Mechatronics 92% NOV/DEC 2015
6 Unconventional Machining process 100% APR/MAY 2016
7 Production Planning and Control 95% APR/MAY 2016
8 Computer Aided Design 98% NOV/DEC 2016
9 Mechatronics 100 % NOV/DEC 2016
10 Production Planning and Control 100 % APR/MAY 2017
11 Unconventional Machining process 100% APR/MAY 2018
12 Manufacturing Technology II 100% APR/MAY 2018
13 Computer Integrated Manufacturing System 91 % NOV/DEC 2018
14 Maintenance Engineering 96.87 % NOV/DEC 2018
