Product Catalogue. Including a comprehensive Application Guide.

(1)

Product Catalogue

(2)

1100 mm 40" 1 Low 1115 mm 44" 2 Medium/Low 1600 mm 62" 2 Medium 1550 mm 61" 2 Medium/Low 1600 mm 62" 3 Medium/High 1600 mm 62" 3 Medium/High 1600 mm 62" 2 Medium 1600 mm 62" 3 High 2030 mm 80" 3 High Level of Training Output Volume Cold Mounting/Laminating Hot Mounting/Laminating Encapsulation

Rigid Indoor Displays Flexible Indoor Displays Floor Graphics Backlit Displays Pop-up Displays Roll-up Displays Rigid Outdoor Displays Textile Banner Displays

Print Guard Jet Guard UV Sol Lam Print Shield Print Mount Optimount Thermashield (PS) Stoplight SEAL 80 Pr o Suit able Consumables Ap plic at ions Pr ocesses Ca pa bi lit y SEAL 62 Pr o SEAL 62 Plus SEAL 62 S SEAL 62 C SEAL 62 U ltra P lus SEAL 62 Base SEAL 44 U ltra P lus SEAL 40 Manual La m in at or s Level of Training 1 - No training required 2 - Minimal 3 - Moderate 4 - Advanced Machine capability Application compatible Application compatible

(Pressure Sensitive materials only) Use SEAL Inkjet Solvent & Water-based Textiles Maximum Working Width

Heat Activated Product

Pressure Sensitive Product

Top Roller only

Machine Selector

SEAL Inkjet Media Re com mendat ion Solvent Photobase Paper Solvent Photobase Paper WB Stoplight CA WB Longlast Vinyl Solvent Eco Vinyl WB / Solvent Stoplight CA WB / Solvent Display Board

Solvent Eco Vinyl Solvent White Film PP Solvent Photobase Paper WB Light Display Film

WB White Film Solvent White Film PP

Solvent Photobase Paper Solvent Photobase Paper SEAL 600 MD 1550 mm 61" 3 High

(3)

Key

Heat Activated Product Pressure Sensitive Product Environmentally Conscious Production Contains UV Protection Rigid Indoor Displays Floor Graphics Pop-up Displays Rigid Outdoor Displays Flexible Indoor Displays Backlit Displays Roll-up Displays Outdoor Banner Displays Vehicle Graphics Indoor Banner Displays

SEAL Graphics produces a complete range of image finishing equipment and materials, enabling large format prints to be quickly and easily enhanced, transforming them into purposeful and more valuable display graphics.

To illustrate the scope of presentation graphics, this product catalogue outlines various everyday appli cations. Each application is matched to recommended SEAL laminates, adhesives, inkjet media and wide format laminators. Below is an overview of the pictures used to represent each application.

Besides indicating the suitable applications for each product, this product catalogue also mentions whether a film or adhesive is pressure sensitive (cold), heat activated (hot), UVprotected or is warranted. Below is an overview of the

representative symbols that are used.

Key / Contents

Corporate Information

About SEAL ... 4

Films & Adhesives Pressure Sensitive Laminates ... 6

UV Sol Lam ... 6

Print Shield ... 8

Heat Activated Laminates ... 12

Jet Guard ... 12

Print Guard ... 14

Floor Guard ... 14

Pressure Sensitive Adhesives ... 15

Print Mount ... 15 Optimount ... 16 Encapsulation Films ... 16 Thermashield ... 16 Backing Films ... 18 Stoplight ... 18

Inkjet Media & Textiles Water-based Printing ... 20

Solvent-based & UV Printing ... 24

Digital Wallpapers ... 31

Display Solutions Display Films & Media ... 32

Premium Solutions... 32 Base Solutions ... 33 Display Systems ... 34 L-Banner ... 34 Roll Banner... 34 Move Up ... 34 AdSeat ... 35 Poster profiles ... 35

Wide Format Laminators SEAL Laminators ... 36 Liquid Lamination Liquid Laminators ... 41 UV Coaters ... 43 SEAL Academy ... 45 Application Guide Application Guide ... 46

Rigid Indoor Displays ... 47

Flexible Indoor Displays ... 48

Floor Graphics ... 49

Backlit Displays ... 50

Pop-up Displays ... 51

Roll-up Displays ... 52

Textile Banner Displays ... 53

Rigid Outdoor Displays ... 54

(4)

SEAL Graphics supplies to the wide format graphics market predominantly through authorised distributors. This worldwide network of SEAL distributors offers quality service and solutions to end user markets such as digital print providers, photo-labs, trade-show houses, sign makers, screen printers, copy shops, quick printers and service bureaus.

Global presence

The SEAL organisation stretches globally through a collection of manufacturing sites, distribution centres and sales offices to service a truly international marketplace. SEAL’s European headquarters are located in Raalte, The Netherlands.

SEAL Graphics Europe, Raalte, The Netherlands

The SEAL brand has been synonymous with quality mounting and laminating products for over thirty years and has evolved through acquisition of complimentary businesses that make it today, the global market leader in wide format print finishing solutions. With a diverse portfolio spanning laminating films, adhesives, inkjet media & textiles, display solutions, wide format laminators, UV coaters, superwide liquid coaters and liquid laminates, SEAL Graphics offers the widest choice of image finishing products in the world.

The complete solution

to image finishing

(5)

Corporate Information

The European office is home to a 400m2_showroom featuring the complete SEAL machine & consumable range. It also houses a fully equipped training centre where distributors and end users are provided with application and hands-on machine trainings for the SEAL Academy.

SEAL’s other offices are based in Germany and in Basildon, UK. The UK facility has got five production machines including coating, laminating and converting. Other manufacturing sites are located in Ontario, Canada, Elkridge, USA and Sun Prairie, USA where the laminators are being designed and manufactured. Located in Hong Kong is the sales branch of SEAL Graphics in Asia.

Innovating for an evolving market

SEAL has pioneered innovative equipment that meets the evolving market demand for low-cost, fast and simple processing of almost every type of print imaginable. Unique products like Stoplight Backing Film and Jet Guard Deep Crystal led the way forward on cutting edge applications for powerful flexible displays in the ever changing world of presentation and display graphics. Today, SEAL

SEAL Graphics UK, Basildon, United Kingdom

Graphics boasts the most comprehensive and diverse range of finishing products in the world. Always focusing on its core strengths, each SEAL product is developed to compliment other SEAL products for compatibility and peace of mind performance. Traditional mounting and laminating has evolved to fast and effortless print finishing using either a combination of laminating films and adhesives or liquid coating systems. In its quest for excellence, SEAL continuously tests its products with other industry manufacturers products and has developed strategic warranty programs with printer partners to provide the ultimate finished product and choice.

So whether you are already offering finishing products or considering it for the first time, consider SEAL, the complete solution to image finishing.

(6)

Films & Adhesives

SEAL Laminating Films & Adhesives

When you select a SEAL material to convert your print, you can be sure of quality, performance and value. With over 45 different heat-activated and pressure-sensitive materials to choose from, each roll of film is specially constructed for perfect mounting, laminating or encapsulating according to your print type and application.

Tried and tested on the market leading SEAL wide format laminators, every material is designed for high performance, optimum image vibrancy as well as protection and is available in a choice of many different finishes and sizes.

Outdoor Applications 1 UV Sol Lam 2 Print Shield Pro 3 Print Mount Pro 4 Print Shield Premium 5 Print Mount Delta

6 Print Shield Plus (also indoor) 7 Print Guard (also indoor) Indoor Applications

8 Print Mount Base/Print Shield Base 9 Optimount

10 Thermashield E 11 Thermashield R 12 Jet Guard/Stoplight

SEAL Consumables Range Positioning

Durabilit y 10 8 5 4 11 3 2 Application Performance Low-end Mid-range High-end Cold films Hot films

UV Sol Lam Gloss

Premium quality, solvent, pressure sensitive, PVC laminate with a high gloss surface specifically designed to provide outstanding protection. The film has an excellent adhesive bond to all media including UV- printed panels that often have a low energy surface due to the characteristics of the ink. This film contains UV-protection in the form of UV-absorbers in the adhesive system to protect against the damage and fade caused by UVA and UVB-exposure outdoors.

UV Sol Lam

UV Sol Lam is a range of highly durable, solvent-based, pressure-sensitive PVC lamination films offering the ultimate finishing solution for all digital printing technologies in particular UV-curable printing. These premium quality lamination films are ideal for indoor and especially outdoor use as they protect against the damage and fade caused by UVA and UVB exposure outdoors. UV Sol Lam films have an indoor durability of 5 and an outdoor durability of 3 years.

PRESSURE SENSITIVE Suitable applications: Solvent Acrylic PVC Silicone Coated Yellow Glassine 70 micron Yes 15˚C - 40˚C Indoor 5 years, Outdoor 3 years Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Durability 12 6 9 7

Size Order Code m²/roll

1040 mm x 50 m 1040 mm x 100 m 1300 mm x 50 m 1300 mm x 100 m 65071 65076 65072 65077 52 m² 104 m² 65 m² 130 m²

1370 mm x 50 m 1400 mm x 50 m 1540 mm x 50 m 1540 mm x 100 m 65073 65074 65075 65078 68,5 m² 70 m² 77 m² 154 m² 1

(7)

UV Sol Lam

Films & Adhesives

Premium quality, solvent, pressure-sensitive laminate with a semi-matte surface specifically designed to provide outstanding protection. The film has an excellent adhesive bond to all media including UV-printed panels that often have a low energy surface due to the characteristics of the ink. This film contains UV-protection in the form of UV-absorbers in the adhesive system to protect against the damage and fade caused by UVA and UVB-exposure outdoors.

UV Sol Lam Semi Matte

Suitable applications:

1370 mm x 50 m 1400 mm x 50 m 1540 mm x 50 m 1540 mm x 100 m 65083 65084 65085 65088 68,5 m² 70 m² 77 m² 154 m² Solvent Acrylic PVC Silicone Coated Yellow Glassine 70 micron Yes 15˚C - 40˚C Indoor 5 years, Outdoor 3 years Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Durability

Premium quality, solvent, pressure-sensitive laminate with a tough matte surface specifically designed to provide outstanding protection. The film has an excellent adhesive bond to all media including UV-printed panels that often have a low energy surface due to the characteristics of the ink. This film contains UV protection in the form of UV-absorbers in the adhesive system to protect against the damage and fade caused by UVA and UVB-exposure outdoors.

UV Sol Lam Matte

1370 mm x 50 m 1400 mm x 50 m 1540 mm x 50 m 1540 mm x 100 m 65093 65094 65095 65098 68,5 m² 70 m² 77 m² 154 m² Solvent Acrylic PVC Silicone Coated Yellow Glassine 70 micron Yes 15˚C - 40˚C Indoor 5 years, Outdoor 3 years Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Durability

Premium quality, solvent, pressure-sensitive laminate with a sand-textured surface specifically designed to provide outstanding protection. The film has an excellent adhesive bond to all media including UV-printed panels that often have a low energy surface due to the characteristics of the ink. This film contains UV-protection in the form of UV-absorbers in the adhesive system to protect against the damage and fade caused by UVA and UVB-exposure outdoors.

UV Sol Lam Sandtex

1540 mm x 50 m 1540 mm x 100 m 65116 65119 77 m² 154 m² Solvent Acrylic PVC Silicone Coated Yellow Glassine 70 micron Yes 15˚C - 40˚C Indoor 5 years, Outdoor 3 years Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Durability

(8)

Print Shield

®

Print Shield Pro Gloss Antigraffiti

High quality gloss solvent pressure sensitive laminate, specifically designed for outdoor use. This film provides excellent protection against UV exposure and is suitable for protecting your image against graffiti and vandalism. This tough laminate is perfect for resisting the cleaners and chemicals required for removing the toughest stains that are created by spray paints or marker pens, making it the ideal indoor and outdoor solution.

Print Shield

®

A broad range of pressure sensitive laminates suitable for photographic and digital media, that are offered in a variety of finishes to suit different application needs, from a premium outdoor range to a set of unique textured finishes. The Print Shield range is ideal for finishing a variety of applications including Pop-up Displays and Rigid Indoor Displays.

Size Order Code m²/roll Size Order Code m²/roll

1295 mm x 100 m 1540 mm x 50 m 13435 64174 129,5 m² 77 m² Solvent Acrylic OPP Silicone Coated PE Kraft 40 micron Yes 15˚C - 40˚C 2 years Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Durability 1040 mm x 50 m 1040 mm x 100 m 1295 mm x 50 m 10794 13107 10068 52 m² 104 m² 64,8 m²

High quality solvent pressure sensitive laminate, suitable for a wide range of digital media. This film provides outstanding protection against UVA and UVB exposure, making it the ideal outdoor finishing solution. Print Shield Pro Matte is a premium quality indoor & outdoor matte laminate containing UV-absorbers to protect against image fade.

Print Shield Pro Matte

1040 mm x 50 m 1040 mm x 100 m 1295 mm x 50 m 10310 12695 10500 52 m² 104 m² 64,8 m²

Suitable applications: 1295 mm x 100 m 1540 mm x 50 m 13617 64172 129,5 m² 77 m² Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Durability Solvent Acrylic PVC Silicone Coated PE Kraft 75 micron Yes 15˚C - 40˚C 4 years PRESSURE SENSITIVE

This product is warranted for 2 years when used in combination with

Solvent Eco Vinyl. See website for further details.

This product is warranted for 2 years when used in combination with WB Longlast

Vinyl. See website for further details.

Print Shield Premium is a water-based adhesive system that offers an excellent bond to a variety of digital output and provides improved protection against UV degradation. This film is a gloss laminate that offers outstanding protection against dirt and abrasion and is ideal for premium applications where longevity of the application is key.

Print Shield Premium Gloss

1295 mm x 100 m 1400 mm x 100 m 1540 mm x 50 m 13500 10197 64171 129,5 m² 140 m² 77 m² Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Durability Water-based PVC Silicone Coated Glassine 70 micron Yes 15˚C - 40˚C 3-4 years Suitable applications:

(9)

Print Shield

®

Films & Adhesives

As part of the Print Shield Premium range, this matte laminate offers outstanding protection against dirt and abrasion and is ideal for premium applications where longevity of the application is key.

Print Shield Premium Matte

Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Durability Water-based PVC Silicone Coated Glassine 75 micron Yes 15˚C - 40˚C 3-4 years

1040 mm x 50 m 1040 mm x 100 m 1295 mm x 50 m 1295 mm x 100 m 11296 12214 11392 13097 52 m² 104 m² 64,8 m² 129,5 m²

1400 mm x 100 m 1540 mm x 50 m 13695 64169 140 m² 77 m²

This product is warranted for 2 years when used in combination with Solvent Eco Vinyl. See website for further details.

Suitable applications: As part of the Print Shield Premium range, this laminate with a sparkling semi-gloss finish offers outstanding protection against dirt and abrasion and is ideal for premium applications where longevity of the application is key.

Print Shield Premium Lustre

1400 mm x 100 m 1540 mm x 50 m 11905 64170 140 m² 77 m² Water-based PVC Silicone Coated Glassine 60 micron Yes 15˚C - 40˚C 3-4 years Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Durability Suitable applications:

This product is warranted for 2 years when used in combination with Solvent Eco Vinyl. See website for further details.

Print Shield Plus Lustre

As part of the Print Shield Plus range, this laminate with a sparkling semi-gloss finish provides extra protection at an economical price and is offering excellent protection against UV degradation, dirt and abrasion of the image.

Suitable applications: Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Durability Water-based PVC Silicone Coated Glassine 75 micron No 15˚C - 40˚C 2-3 years

Print Shield Plus Gloss

Print Shield Plus is an excellent choice for a mid range product, it provides extra protection at an economical price. As part of the Seal warranty solution the Print Shield Plus range is all you need to cope with the demands of outdoor applications. This film is a gloss laminate offering excellent protection against UV degradation, dirt and abrasion of the image.

1400 mm x 50 m 1550 mm x 50 m 65033 65034 70 m² 77,5 m² Suitable applications: Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Durability Water-based PVC Silicone Coated Glassine 70 micron No 15˚C - 40˚C 2-3 years

This product is warranted for 1 year when used in combination with Solvent Eco Vinyl. See website for further details.

Size Order Code m²/roll Size Order Code m²/roll

1040 mm x 50 m 1040 mm x 100 m 1295 mm x 50 m 1295 mm x 100 m 65041 65045 65042 65046 52 m² 104 m² 64,8 m² 129,5 m² 1400 mm x 50 m 1550 mm x 50 m 65043 65044 70 m² 77,5 m²

(10)

Print Shield

®

Print Shield Plus Matte

As part of the Print Shield Premium range, this matte laminate offers outstanding protection against dirt and abrasion and is ideal for premium applications where longevity of the application is key.

1400 mm x 50 m 1550 mm x 50 m 65053 65054 70 m² 77,5 m²

Print Shield Base Gloss

Print Shield Base is specifically designed for short-term applications such as Point of Sale, where quick turnaround is key to achieving good promotional success. Although perfect for indoor applications the films can be used for basic protection in an outdoor environment. This cost effective gloss laminate provides a short-term protection against dirt and abrasion.

1295 mm x 100 m 1400 mm x 50 m 1550 mm x 50 m 65006 65003 65004 129,5 m² 70 m² 77,5 m² Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Durability Water-based PVC Silicone Coated Glassine 70 micron No 15˚C - 40˚C 2-3 years Suitable applications:

Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Durability Water-based PVC Silicone Coated Glassine 80 micron No 15˚C - 40˚C 1-2 years

Print Shield Base Lustre

As part of the Print Shield Base range, this cost-effective laminate with a sparkling semi-gloss finish provides a short-term protection against dirt and abrasion.

1295 mm x 100 m 1400 mm x 50 m 1550 mm x 50 m 65016 65013 65014 129,5 m² 70 m² 77,5 m²

Print Shield Base Matte

As part of the Print Shield Base range, this cost-effective matte laminate provides a short-term protection against dirt and abrasion.

1295 mm x 100 m 1400 mm x 50 m 1550 mm x 50 m 65026 65023 65024 129,5 m² 70 m² 77,5 m² Suitable applications: Suitable applications: Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Durability Water-based PVC Silicone Coated Glassine 80 micron No 15˚C - 40˚C 1-2 years Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Durability Water-based PVC Silicone Coated Glassine 80 micron No 15˚C - 40˚C 1-2 years

(11)

GLOSS

MATTE

Print Shield Wide Gloss / Matte

2 metre wide overlaminates, ideal for large format indoor applications.

2000 mm x 50 m 13309 100 m² 2000 mm x 50 m 13770 100 m² Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Water-based PVC Silicone Coated PE Kraft 80 micron No 15˚C - 40˚C

Print Shield Base Sandtex

Specifically designed for short-term Point-of-Sale applications, where quick graphic turnaround is critical to achieve good promotional success. Perfect for indoor applications, this film provides basic protection against dirt and abrasion. Print Shield Base Sandtex is a cost effective laminate providing a non-reflective textured finish for display graphics.

880 mm x 50 m 880 mm x 100 m 914 mm x 50 m 1040 mm x 50 m 1040 mm x 100 m 64355 64356 64350 64357 64358 44 m² 88 m² 45,7 m² 52 m² 104 m²

1067 mm x 50 m 1295 mm x 50 m 1295 mm x 100 m 1400 mm x 50 m 1550 mm x 50 m 64351 64359 64360 64361 64589 53,4 m² 64,8 m² 129,5 m² 70 m² 77 m² Suitable applications: Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Durability Water-based PVC Silicone Coated Glassine 80 micron No 15˚C - 40˚C 1-2 years

This product is warranted for removability after 30 days when used in combination with Solvent Eco Vinyl Gloss 80 RA/GRA. See website for further details.

Print Shield Sandtex

1040 mm x 100 m 1067 mm x 50 m 1295 mm x 50 m 12621 60903 10048 104 m² 53,4 m² 64,8 m² Durable, pressure sensitive laminate with scuff/slip resistance, making it an ideal solution for producing Floor Graphics or finishing Pop-up display graphics. Its non-reflective textured surface enhances the image and protects against damage.

Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Water-based PVC Silicone Coated PE Kraft 100 micron No 15˚C - 40˚C Suitable applications:

880 mm x 50 m 880 mm x 100 m 914 mm x 50 m 1040 mm x 50 m 61193 64447 60902 61194 44 m² 88 m² 45,7 m² 52 m² Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Water-based Polyester Core Silicone Coated Glassine 150 micron No 15˚C - 40˚C

Print Shield Deep Crystal

Premium SEAL patented film offering a unique and uniform, crystal textured satin finish. Ideal for reducing glare from reflected light. Perfect for high performance Pop-up Displays.

880 mm x 50 m 880 mm x 100 m 914 mm x 50 m 1040 mm x 50 m 60894 64448 60899 60900 44 m² 88 m² 45,7 m² 52 m²

1040 mm x 100 m 1067 mm x 50 m 1295 mm x 50 m 1370 mm x 50 m 60905 60901 60920 60490 104 m² 53,4 m² 64,8 m² 68,5 m²

Print Shield

®

(12)

Print Shield Crystal Lite

880 mm x 50 m 914 mm x 50 m 65200 65201 44 m² 45,7 m² Suitable applications: Print Shield Crystal Lite is a lightweight crystal textured finish, with a pressure sensitive UV stabilised PP lamination film and a proven water-based adhesive system. Print Shield Crystal Lite is ideal for Pop-up and Roll-up systems where application longevity is not critical.

Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Durability Water-based OPP Silicone Coated Glassine 168 micron No 15˚C - 40˚C 1 Year

1040 mm x 50 m 1067 mm x 50 m 65202 65203 52 m² 53,4 m²

Jet Guard Crystal Matte

Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature EVA Polyester Core None 150 micron No 95˚C - 100˚C Clear matte finish, ideal for reducing glare from reflected light for easy viewing.

A unique SEAL patented product.

Jet Guard

®

A range of low temperature heat activated lamination films designed for use with inkjet prints. With no release liner, these films are easy to set up and use with minimal waste. The Jet Guard range is ideal for Pop-up and Roll-up Display graphics.

HEAT ACTIVATED

880 mm x 50 m 1040 mm x 50 m 13186 11213 44 m² 52 m²

1040 mm x 100 m 1370 mm x 100 m 12931 10714 104 m² 137 m²

Print Shield

®

Jet Guard

®

(13)

Jet Guard

®

Films & Adhesives

Jet Guard Deep Crystal

880 mm x 50 m 880 mm x 100 m 1040 mm x 50 m 10671 60107 13340 44 m² 88 m² 52 m²

Suitable applications: 1040 mm x 100 m 1295 mm x 50 m 1370 mm x 100 m 11041 60384 12805 104 m² 64,8 m² 137 m²

Jet Guard UV Gloss 75

Jet Guard UV Gloss 125

Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature EVA Polyester Core None 150 micron No 95˚C - 100˚C Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature EVA Polyester Core None 75 micron Yes 85˚C - 95˚C Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature EVA Polyester Core None 125 micron Yes 85˚C - 95˚C Unique and uniform, crystal textured satin finish. Ideal for reducing glare from reflected light.

A unique SEAL patented product.

High gloss finish offering high impact colour enhancement. Offers UV-protection against UVA and UVB-rays to protect images against fade.

1400 mm x 150 m 61412 210 m²

1040 mm x 150 m 61411 156 m²

1040 mm x 120 m 61424 124,8 m²

Jet Guard Crystal Lite

Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature EVA Polyester Core None 110 micron No 85˚C - 95˚C Jet Guard Crystal Lite is a lightweight crystal textured finish, which is suitable for general

lamination of photographic and inkjet media. Jet Guard Crystal Lite is ideal for Pop-up and Roll-up systems where application longevity is not critical.

880 mm x 100 m 1040 mm x 100 m 65209 65208 88 m² 104 m²

(14)

Print Guard UV Ultra Matte

Suitable applications: 1040 mm x 50 m 10055 52 m² Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Durability Solvent Acrylic PVC Silicone Coated PE Kraft 75 micron Yes 95˚C - 100˚C 4 years Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Durability Solvent Acrylic PVC Silicone Coated PE Kraft 50 micron Yes 95˚C - 100˚C 4 years

Print Guard UV Lustre

Print Guard

®

A range of heat activated laminates containing UV-absorbers to prevent fading and extend the life of the image. These laminates overcome surface imperfections for a smooth finish and prevent silvering whilst providing an instant, permanent bond for fast processing. The Print Guard range is ideal for a variety of applications including Rigid Indoor Displays.

HEAT ACTIVATED

Premium heat activated laminate with excellent UV protection and all round performance on a variety of media surfaces. Flat, matte finish, which softens images whilst eliminating reflections and glare.

Premium heat activated laminate with excellent UV protection and all round performance on a variety of media surfaces. Sparkling, semi-gloss finish that reduces reflections and glare.

1295 mm x 100 m 11895 129,5 m²

1295 mm x 100 m 10052 129,5 m²

Print Guard

®

Floor Guard

®

Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Durability Solvent Acrylic PVC Silicone Coated PE Kraft 100 micron Yes 95˚C - 100˚C 4 years

Floor Guard

Durable, heat activated laminate with scuff/slip resistance. An ideal finishing solution in the creation of Floor Graphics. Its non-reflective textured surface enhances the image and protects against damage.

1295 mm x 50 m 10475 64,8 m² 64587 60565 44 m² 52 m² 880 mm x 50 m 1040 mm x 50 m

(15)

Print Mount

®

Films & Adhesives

Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Water-based OPP construction Silicone Coated Glassine 25 micron N/A 15˚C - 40˚C

Print Mount Base

1295 mm x 100 m 1400 mm x 50 m 1550 mm x 50 m 64315 64316 64575 129,5 m² 70 m² 77,5 m² Clear mounting film, designed to complement SEAL Print Shield Base laminates in

providing a quick, yet affordable finishing solution when producing Point-Of-Sale graphics. Only suitable for creating indoor displays where application longevity is not critical.

Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Durability Solvent Free Polyester Silicone Coated PE Kraft 12 micron N/A 15°C - 35°C 6 months

Print Mount Delta

Suitable applications: 1295 mm x 100 m 1400 mm x 50 m 1400 mm x 100 m 60938 60939 60940 129,5 m² 70 m² 140 m²

Print Mount

®

A range of pressure sensitive adhesive films that offer a superior bond when mounting prints to a variety of substrates. Selection of adhesives for both indoor and outdoor applications.

High performing universal mounting film, perfect for mounting digital/photographic prints or posters. Ideal for Rigid Indoor and short term Outdoor Displays. Can last up to 6 months outdoors depending on the environment.

PRESSURE SENSITIVE Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Durability Solvent Acrylic Polyester Silicone Coated PE Kraft 12 micron N/A 15°C - 40°C 3 years

Print Mount Pro

1040 mm x 50 m 1040 mm x 100 m 1295 mm x 50 m 64195 64196 64197 52 m² 104 m² 64,8 m² Suitable applications: 1295 mm x 100 m 1400 mm x 50 m 1520 mm x 50 m 64198 64199 64201 129,5 m² 70 m² 76 m² High quality mounting film, coated on both sides with a permanent pressure-sensitive, moisture-stable adhesive, designed for pre-coating stable panels and media that are used for indoor and outdoor presentation purposes. Ideal for use with Print Shield Pro laminates.

(16)

Print Mount

®

_{/ Optimount}

®

Thermashield

®

Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Water-based PVC Silicone Coated PE Kraft 50 micron N/A 15˚C - 40˚C

Print Mount Removable

1040 mm x 50 m 61188 52 m²

Suitable applications: Clear double-sided pressure sensitive adhesive, with one side permanent and the other side

removable. Ideal for Floor Graphic displays.

1295 mm x 50 m 61189 64,8 m² Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Water-based PET Silicone Coated PE Kraft 12 micron N/A 15˚C - 40˚C

Print Mount Wide

Economical solution for mounting media to rigid substrates such as foam board or rigid PVC for indoor applications.

Optimount

Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Water-based Polyester Silicone Coated Polyester / White LDPE 80 micron N/A 15˚C - 40˚C Suitable applications:

Double sided, pressure sensitive, optically clear adhesive that creates a permanent bond to both graphics and substrates. Ideal for face mounting to clear acrylic.

1540 mm x 50 m 2000 mm x 50 m 64175 116026427 77 m² 100 m²

1040 mm x 50 m 1240 mm x 50 m 1300 mm x 50 m 116023048 116023049 116023050 52 m² 62 m² 65 m²

1400 mm x 50 m 1550 mm x 50 m 116023051 116026195 70 m² 77,5 m²

Encapsulation films

A range of economy and premium thermal polyester encapsulating films. Designed for smooth and consistent encapsulation of photographic and digital output to enhance, whilst protecting images from dirt and abrasion. The Thermashield range is ideal for Flexible Indoor Displays.

HEAT ACTIVATED

Thermashield E Gloss 75

Suitable applications: 1040 mm x 150 m 1295 mm x 150 m 61115 61116 156 m² 194,3 m²

1400 mm x 150 m 1560 mm x 150 m 61117 61410 210 m² 234 m² Economical solution where a high quality finish is not essential, suitable for encapsulating

posters, menus and P.O.S. displays. 75 micron thick film with a standard gloss finish. Laminate/ Adhesive Ratio Thickness 1:5 75 micron Adhesive Laminate/carrier UV Protection Recommended EVA Polyester None 95˚C - 110˚C

(17)

Thermashield

®

Films & Adhesives

Thermashield E Gloss 125

Suitable applications: 1040 mm x 120 m 1295 mm x 120 m 61403 61404 124,8 m² 155,4 m²

1400 mm x 120 m 1560 mm x 120 m 61405 61406 168 m² 187,2 m² Economical solution where a high quality finish is not essential, suitable for encapsulating

posters, menus and P.O.S. displays. 125 micron thick film with a standard gloss finish. Laminate/ Adhesive Ratio Thickness 1:4 125 micron Adhesive Laminate/carrier UV Protection Recommended Temperature EVA Polyester None 95˚C - 110˚C

Economical solution where a high quality finish is not essential, suitable for encapsulating posters, menus and P.O.S. displays. 250 micron thick film with a standard gloss finish.

Thermashield E Gloss 250

1400 mm x 60 m 61409 84 m² Laminate/ Adhesive Ratio Thickness 3:7 250 micron Adhesive Laminate/carrier UV Protection Recommended Temperature EVA Polyester None 95˚C - 110˚C

Thermashield E Matte 75

1400 mm x 150 m 60971 210 m² Economical solution where a high quality finish is not essential, suitable for encapsulating posters, menus and P.O.S. displays. 75 micron thick film with a standard matte finish.

Adhesive Laminate/carrier UV Protection Recommended Temperature EVA Polyester None 95˚C - 110˚C Laminate/ Adhesive Ratio Thickness 1:2 75 micron

Thermashield E Matte 125

1400 mm x 120 m 61415 168 m² Economical solution where a high quality finish is not essential, suitable for encapsulating

posters, menus and P.O.S. displays. 125 micron thick film with a standard matte finish. Laminate/ Adhesive Ratio Thickness 1:4 125 micron Adhesive Laminate/carrier UV Protection Recommended Temperature EVA Polyester None 95˚C - 110˚C

Thermashield R Gloss 75

1400 mm x 150 m 60978 210 m² High quality 75 micron thick film offering a sharp premium gloss finish.

Laminate/ Adhesive Ratio Thickness 1:2 75 micron Adhesive Laminate/carrier UV Protection Recommended Temperature EVA Polyester None 95˚C - 110˚C

(18)

Thermashield

®

Stoplight

®

1040 mm x 120 m 1295 mm x 120 m 61419 61426 124,8 m² 155,4 m²

1400 mm x 120 m 61427 168 m²

Thermashield R Gloss 125

High quality 125 micron thick film offering a sharp premium gloss finish.

Laminate/ Adhesive Ratio Thickness 2:3 125 micron Adhesive Laminate/carrier UV Protection Recommended Temperature EVA Polyester None 95˚C - 110˚C

1040 mm x 50 m 61167 52 m²

Stoplight 115

880 mm x 50 m 61166 44 m²

Unique white heat activated backing film with excellent flexibility, ideal for Roll-up Displays.

Backing films

A range of heat activated and pressure sensitive white backing films with a unique SEAL patented light blocking core, providing the ultimate finishing solution for Roll-up and Pop-up Display Systems.

HEAT ACTIVATED PRESSURE SENSITIVE

Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature EVA Metalised OPP N/A 115 micron N/A 95˚C - 100˚C

Stoplight 220

Suitable applications: 880 mm x 50 m 1040 mm x 50 m 13279 60086 44 m² 52 m²

1295 mm x 50 m 60760 64,8 m² Unique white heat activated backing film which gives a print the rigidity and opacity required

for use in Pop-up Display Systems. Ideal for end/curved panels where flexibility is essential. Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature EVA Polyester / Aluminium N/A 220 micron N/A 95˚C - 100˚C

(19)

Films & Adhesives

Stoplight 320

Stoplight

®

PS Stoplight

®

880 mm x 50 m 1040 mm x 50 m 64100 64101 44 m² 52 m²

1295 mm x 50 m 64102 64,8 m² Unique white heat activated backing film which gives a print the rigidity and opacity required

for use in Pop-up Display systems. Ideal for main front panels where rigidity is key. Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature EVA Polyester / Aluminium N/A 320 micron N/A 95˚C - 110˚C

PS Stoplight 115

PS Stoplight 220

PS Stoplight 320

Unique white pressure sensitive backing film, designed for users with cold lamination

facilities. Ideal for Roll-up displays. Adhesive

Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Water-based Metalised OPP Polyester 107 micron N/A 10˚C - 40˚C

880 mm x 50 m 1040 mm x 50 m 64143 64237 44 m² 52 m²

1040 mm x 50 m 60416 52 m²

880 mm x 50 m 60421 44 m²

Unique white pressure sensitive backing film, designed for users with cold lamination

facilities. Ideal for end/curved panels where flexibility is essential. Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Water-based Polyester / Aluminium Polyester 180 micron N/A 15˚C - 40˚C

1040 mm x 50 m 64125 52 m²

880 mm x 50 m 64124 44 m²

Unique ultra thick white pressure sensitive backing film, designed for users with cold

lamina-tion facilities to produce Pop-up graphics. Ideal for main front panels to provide rigidity. Adhesive Laminate/carrier Release Liner Thickness UV Protection Recommended Temperature Water-based Polyester / Aluminium Polyester 305 micron N/A 15˚C - 40˚C

(20)

Inkjet Media

WB Stoplight CA

SEAL Inkjet Media & Textiles

SEAL inkjet media & textiles exemplify SEAL’s vast experience in wide format digital graphics and are engineered from the latest coating technology. The SEAL inkjet range consists of a selection of display media, films, papers, self-adhesive vinyls, textiles and wallpapers that are fully tested with the most popular SEAL laminates and adhesives to ensure compatibility at every step in the graphic finishing process. All are suitable for either water-based or solvent-based and/ or UV printing in the production of indoor and outdoor applications.

CA inkjet coating

SEAL now offers its display media with a revolutionary new high performance inkjet coating. This new & improved CA coating allows print providers to drastically reduce the number of colour profiles they need to generate constant printing results. In addition, this new CA coating provides much better colour properties and offers

perfect print results with the latest printer models. Inkjet printers require less ink for the same colour density which means a considerable cost reduction. Next to better colour quality, the ink will dry much quicker as less ink is required.

ColorBase

To ensure optimal print quality and consistent, reproducible colours, SEAL provides a new tool for print media users and suppliers called ColorBase. ColorBase is a unique web-based centralised database that enables easy and efficient distribution of colour profiles. From now on every user has easy access to SEAL colour profiles on www.sealgraphics.nl 24/7. And what's more, any profile changes and updates are communicated automatically.

Media Thickness Coating Recommended Inks ICC Profile

PET, polyester film with a light blocking layer 175 micron, 300 micron, 380 micron Matte finish, Scratch resistant Pigmented (Dye-based: watch light fading) WB CA certified media SEAL Stoplight printable backing materials combine the unique properties of the traditional SEAL

Stoplight films providing excellent image quality. The 100% polyester base - offering best stability - is coated with a newly developed, high performance inkjet coating for water-based inkjet printers. In combination with SEAL Print Shield Deep Crystal the new WB Stoplight CA media provide a premium solution for high performance Pop-up, Roll-up and banner stand applications. WB Stoplight CA media are printable with all kinds of water-based inks.

914 mm x 20 m 116029154 18,3 m²

WB STOPLIGHT 300 CA

Water-based Printing -

Display Media

914 mm x 30 m 1067 mm x 30 m 116029150 116029151 27,4 m² 32 m² WB STOPLIGHT 200 CA

WB Stoplight B1 CA

This new Stoplight media family combines the unique Stoplight properties with B1 fire retardancy making it the first choice for producers of exhibition display systems. WB Stoplight B1 CA is coated with a newly developed, high performance inkjet coating for water-based inkjet printers. In combination with SEAL Print Shield Deep Crystal the new WB Stoplight B1 CA media provide a premium solution for high performance Pop-up, Roll-up and banner stand applications. WB Stoplight B1 CA are printable with all kinds of water-based inks.

914 mm x 20 m 116028506 18,3 m²

WB STOPLIGHT 400 CA

914 mm x 30 m 1067 mm x 30 m 116029146 116029147 27,4 m² 32 m² WB STOPLIGHT 200 B1 CA

914 mm x 20 m 116029145 18,3 m²

WB STOPLIGHT 400 B1 CA

Media Thickness Coating Recommended Inks Fire Rating ICC Profile Fire retardant Stoplight compound 230 micron (stoplight 200), 400 micron (stoplight 400) Matte finish, Scratch resistant Pigmented (Dye-based: watch light fading) B1

WB CA certified media

(21)

Water-based Media

Display Media

Self-adhesive Vinyls

WB Longlast Vinyl

Designed for greater gamuts and longer lifetime, this media for water-based inks represents a high performance inkjet coating, giving unsurpassed longevity and print quality at the same time. The WB Longlast Vinyl comes with a grey, solvent-free, permanent adhesive to make it the ideal choice for your outdoor applications.

Media Thickness Coating Recommended Inks Adhesive SEAL Finishing Solutions Soft Monomeric PVC 80 micron (vinyl) Waterproof and scratch-resistant (matte) Pigmented Solvent-free, grey, permanent Print Shield Pro Lustre/ Matte

When used in combination with Print

Shield Pro Matte this product

is warranted for 2 years. See website for further details. Media Thickness Coating Recommended Inks Adhesive Soft Monomeric PVC 80 micron (vinyl) Water- and scratch-resistant (glossy) Dye and Pigmented Solvent-free, permanent

WB Indoor Vinyl Gloss

This glossy finished, highly flexible print media is ideal for producing stunning indoor graphics. It can be printed with dye and pigmented inks and shows considerable water-resistance after drying if printed with pigmented inks. WB Indoor Vinyl Gloss offers the opportunity to create vivid graphics with almost every water-based ink and on almost every water-based printer.

914 mm x 20 m 1067 mm x 20 m 1270 mm x 20 m 64515 64516 64517 18,3 m² 21,3 m² 25,4 m²

1370 mm x 20 m 1524 mm x 20 m 116019735 116019736 27,4 m² 30,5 m²

914 mm x 20 m 1067 mm x 20 m 1270 mm x 20 m 64519 64520 64521 18,3 m² 21,3 m² 25,4 m²

1372 mm x 20 m 1524 mm x 20 m 116012490 116012491 27,4 m² 30,5 m²

WB Display Board B1 CA

This hard PVC base is coated with the new developed, high performance CA inkjet coating for water-based inkjet printers. WB Display Board B1 CA media is the first choice for producers of exhibition display systems due to the B1 fire retardancy. These display media have an opaque appearance due to the thick hard PVC base. The material is printable with all kinds of water-based inks. In conjunction with SEAL Print Shield Crystal Lite the new WB Display Board CA family offers a good quality solution for your display system demands.

914 mm x 30 m 1067 mm x 30 m 116028514 116028526 27,4 m² 32 m² WB DISPLAy BOARD 200 B1 CA

Media Thickness Coating Recommended Inks Weight Fire Rating ICC Profile Fire retardant hard PVC 215 micron, 310 micron, 430 micron Matte finish, Scratch resistant Pigmented (Dye-based: watch light fading) 305 g/m², 445 g/m², 610 g/m² B1 WB CA certified media 914 mm x 20 m 1067 mm x 20 m 116028509 116028510 18,3 m² 21,3 m² WB DISPLAy BOARD 300 B1 CA

914 mm x 20 m 1067 mm x 20 m 116028507 116028508 18,3 m² 21,3 m² WB DISPLAy BOARD 400 B1 CA

(22)

Papers

Other Films

WB White Film PP

220 micron polypropylene film with a special inkjet coating for water-based inkjet printers. Suitable for pigmented and dye-based inks, this film provides excellent poster printing quality and is also suitable for display systems or simple backlit applications. When printed with pigmented inks the film is waterproof and suitable for indoor and outdoor use.

Media Thickness Weight Inkjet Coating Recommended Inks Polypropylene Film 220 micron 130 g/m2 Matte finish, scratch resistant Dye and Pigmented Suitable applications:

914 mm x 30 m 116023885 27,4 m²

1270 mm x 30 m 116023886 38,1 m²

WB Paper Matte

Paper Matte is a bright white paper with a matte surface that guarantees an excellent print quality, accepting high ink levels without cockling. This dimensionally stable, fast drying media is suitable for hot lamination and encapsulation and is designed for dye, pigmented and oil-based inks. Paper Matte is ideal for indoor applications like posters, indoor banners, Pop-up and Roll-up displays.

Media Thickness Coating Recommended Inks Weight

Matte coated paper 225 micron Matte inkjet coating Dye and Pigmented 180 g/m2 Suitable applications:

1372 mm x 30 m 1524 mm x 30 m 116019648 116019650 41,2 m² 45,7 m²

WB Photobase Paper

High quality, heavy microporous photo paper with a gloss and lustre finish designed for water-based printing. The microporous inkjet coating provides ‘instant dry’ performance and an improved smear resistance. Offering photo realistic print quality, this photo paper is suitable for cold and hot lamination and is designed for dye-based and pigmented inks.

Media Thickness Inkjet Coating Recommended Inks Weight White photobase inkjet paper 240 micron Microporous, gloss and satin finish Dye and Pigmented 235 g/m2 Suitable applications:

GLOSS

914 mm x 30 m 1067 mm x 30 m 1270 mm x 30 m 1524 mm x 30 m 116023897 116023898 116023899 116023900 27,4 m² 32 m² 38,1 m² 45,7 m² SATIN

914 mm x 30 m 1067 mm x 30 m 1270 mm x 30 m 1524 mm x 30 m 116023893 116023894 116023895 116023896 27,4 m² 32 m² 38,1 m² 45,7 m²

WB Light Display Film

Unique "Front print" film for use in lightbox applications to eliminate reverse image printing. The water-resistant coating protects the print from moisture, making it ideal for both indoor and outdoor use.

914 mm x 30,5 m 1270 mm x 30,5 m 61277 61278 27,8 m² 38,7 m²

1524 mm x 30,5 m 61279 46,4 m² Media Thickness Core Size Recommended Inks SEAL Finishing Solutions Polyester 225 micron 50 mm Dye, Pigmented and Eco-solvent Optimount

Papers

Other Films

(23)

Water-based Media

Inkjet Media & Textiles

Other Films

Textiles

914 mm x 15 m 1067 mm x 15 m 116026030 116025932 13,7 m² 16 m² Media Thickness Coating Recommended Inks Weight Canvas textile 470 micron Matt finish Dye and Pigmented 370 g/m2

WB Colour Canvas

A true cotton, matte coated heavy canvas, printable with all water-based inks, including pigmented inks. Suitable for art reproductions as well as display creation, this media provides bright colours and excellent printing quality. This material can be stretched around a frame without cracking.

1270 mm x 15 m 1524 mm x 15 m 116026032 116026034 19 m² 22,9 m²

1372 mm x 30 m 1524 mm x 30 m 116024522 116024523 41,2 m² 45,7 m² Media Thickness Coating Recommended Inks Weight Fire Rating Polyester 285 micron Waterproof and scratch-resistant (matte) Dye and Pigmented 240 g/m2 B1

WB Heavy Banner

As the heavyweight version of the WB Light Banner, this media has the same brilliant colour reproduction features and the unmatched performance in every kind of application. As it is slightly thicker WB Heavy Banner lends more opacity to banners or display panels. Because of the heavier construction, it can cope with even higher ink loads, as well. Due to its special inkjet coating, trimming can be performed with a cutter without the edges fraying, this fabric no longer requires hot cutting.

WB White Film

Media Thickness Core Size Recommended Inks SEAL Finishing Solutions Polyester 115 micron 50 mm Dye Optimount White polyester film with excellent photo realistic results and brilliant image quality.

Once printed, can also be used as a cost effective economy backlit display solution.

914 mm x 30 m 61231 27,4 m²

WB Light Banner

Matte finish polyester banner fabric with a universal coating specifically designed for printing with dye and pigmented inks. Particularly stable with high ink saturation and does not require a release liner on the rear of the media preventing ink from saturating through to the printer. The media is moisture-resistant, although not washable. This highly durable fabric is capable of withstanding cracking and stretching during application. Due to its special inkjet coating, trimming can be performed with a cutter without the edges fraying, this fabric no longer requires hot cutting.

914 mm x 45,7 m 1067 mm x 45,7 m 116024514 116024515 41,8 m² 48,8 m²

1270 mm x 45,7 m 1524 mm x 45,7 m 116024516 116024518 58 m² 69,7 m² Suitable applications: Polyester banner fabric 190 micron 165 g/m2 50 mm Dye and Pigmented Stand alone pro-duct that does not require finishing in application. B1 Media Thickness Weight Core Size Recommended Inks SEAL Finishing Solutions Fire Rating

Textiles

(24)

Solvent-based & UV-curable Printing

Solvent-based

Display Media

Solvent Stoplight CA

SEAL solvent-based Stoplight printable backing materials combine the unique properties of the traditional SEAL Stoplight backing films providing excellent image quality. The 100% polyester base - offering best stability - is coated with a newly developed, high performance inkjet coating for solvent inkjet printers. The material is printable with all kinds of solvent and UV- curable inks, offering consistent and photo-realistic print outs. In combination with SEAL Print Shield Deep Crystal the new Solvent Stoplight CA family provide a premium solution for high performance Pop-up, Roll-up and banner stand applications.

Display Media

914 mm x 20 m 116029155 18,3 m²

SOLVENT STOPLIGHT 300 CA

914 mm x 30 m 1067 mm x 30 m 116029152 116029153 27,4 m² 32 m² SOLVENT STOPLIGHT 200 CA

914 mm x 20 m 116026984 18,3 m²

SOLVENT STOPLIGHT 400 CA

Media Thickness Coating Recommended Inks ICC Profile

PET, polyester film with a light blocking layer 175 micron, 300 micron, 380 micron Matte finish, Scratch resistant, Water resistant Solvent, Eco-solvent and UV-curable Solvent CA certified media

Solvent Stoplight B1 CA

This new Stoplight media family combines the unique Stoplight properties with B1 fire retardancy making it the first choice for producers of exhibition display systems. Solvent Stoplight B1 CA is coated with a newly developed, high performance inkjet coating for solvent inkjet printers. The material is printable with all kinds of solvent and UV curable inks, offering consistent and photo-realistic printouts. In combination with SEAL Print Shield Deep Crystal the new Solvent Stoplight B1 CA media provide a premium solution for high performance Pop-up and banner stand applications.

Suitable applications: Media Thickness Coating Recommended Inks Fire Rating ICC Profile Fire retardant Stoplight compound 330 micron, 450 micron Matte finish, Scratch resistant, Water resistant Solvent, Eco-solvent and UV-curable B1 Solvent CA certified media 914 mm x 20 m 116029148 18,3 m² SOLVENT STOPLIGHT 400 B1 CA

914 mm x 20 m 116029149 18,3 m²

SOLVENT STOPLIGHT 300 B1 CA

Solvent Display Board B1 CA

This hard PVC base is coated with the new developed, high performance CA inkjet coating for solvent and UV printers. Solvent Display Board B1 CA is the first choice for producers of exhibition display systems due to the B1 fire retardancy. These display media have an opaque appearance due to the thick hard PVC base. In conjunction with SEAL Print Shield Crystal Lite the new Solvent Display Board CA family offers a good quality solution for your display system demands.

Fire retardant Hard PVC 310 micron, 430 micron Matte finish, Scratch resistant Water resistant Solvent, Eco-solvent, UV-curable B1 Solvent CA certified media Media Thickness Inkjet Coating Recommended Inks Fire Rating ICC Profile Suitable applications: 914 mm x 20 m 1067 mm x 20 m 116026982 116026983 18,3 m² 21,3 m²

SOLVENT DISPLAy BOARD 300 B1 CA

914 mm x 20 m 1067 mm x 20 m 116026980 116026981 18,3 m² 21,3 m²

SOLVENT DISPLAy BOARD 400 B1 CA

(25)

Solvent-based Media

Self-adhesive Vinyls - Monomeric

Solvent Eco Vinyl Gloss RA & GRA

Glossy finished, white 80 micron monomeric vinyl with a removable clear & grey adhesive. The grey removable adhesive is non-transparent and is suitable for stretching and elongation. Specially designed as a cost effective solution for solvent printers, which do not require an inkjet coating. This vinyl is suitable for indoor and short- to mid-term outdoor applications.

Monomeric PVC 80 micron Semi-permanent, clear & grey adhesive None

Solvent, Eco-solvent and UV-curable Print Shield Sandtex, Print Shield Media Media Thickness Adhesive Coating Inkjet Coating Recommended Inks SEAL Finishing Solutions

Solvent Eco Vinyl PA & GPA

Matte & gloss finish, white 80 and 100 micron monomeric vinyls with a permanent clear or grey adhesive. Specifically designed as a cost effective solution for solvent printers, which do not require an inkjet coating. The vinyls are suitable for short term outdoor applications. The Eco Vinyl Gloss GPA is specifically designed for applications, where preventing the substrate from showing through the graphic is of significant importance.

When used in combination with Print Shield Premium laminates these products are warranted for 2 years. When used with Print Shield Plus laminates these products are warranted for 1 year. See website for further details.

1372 mm x 50 m 1550 mm x 50 m 64387 64388 68,6 m² 77,5 m² Gloss 80GPA

1040 mm x 50 m 1372 mm x 50 m 1550 mm x 50 m 64383 64384 64385 52 m² 68,6 m² 77,5 m² Gloss 80PA

1040 mm x 50 m 1372 mm x 50 m 1550 mm x 50 m 64380 64381 64382 52 m² 68,6 m² 77,5 m² Matte 80PA

Monomeric PVC 80 micron 100 micron Clear Permanent/ Grey Permanent None Solvent, Eco-solvent and UV-curable Print Shield Premium Laminates Media Thickness Adhesive Coating Inkjet Coating Recommended Inks SEAL Finishing Solutions

Selfadhesive Vinyls Monomeric

1040 mm x 50 m 1372 mm x 50 m 1550 mm x 50 m 116027907 116027908 116027909 52 m² 68,6 m² 77,5 m² Gloss 100PA

1040 mm x 50 m 1372 mm x 50 m 1550 mm x 50 m See website See website See website 52 m² 68,6 m² 77,5 m² 80RA

When used in combination with Print Shield Sandtex this product is warranted for removability after 30 days. See website for further details.

1040 mm x 50 m 1372 mm x 50 m 1550 mm x 50 m See website See website See website 52 m² 68,6 m² 77,5 m² 80GRA