INDUSTRIAL DISTRIBUTION

(1)

All prices are subject to change without notice Typographical errors are subject to correction

AVOID ERRORS: use catalog numbers when ordering PRICES EFFECTIVE

APRIL 5, 2021

INDUSTRIAL DISTRIBUTION

FOR ORDERS & ORDER INQUIRIES ONLY CONTACT:

PHONE (800) 722-7290 FAX (800) 722-7236

FOR OTHER INFORMATION PHONE (828) 835-9765

INDUSTRIAL & FORCE

POWER TOOLS & ACCESSORIES PRICE LIST

• Date: April 5, 2021

• Supercedes ZPR0021 RevS dated February 1, 2020

PRINTED IN USA

250 SNAP-ON DRIVE • PO BOX 1596 • MURPHY, NC 28906 • USA • PHONE: 800-722-7290 • www.siouxtools.com

(2)

SIOUX TOOLS WARRANTS TO THE ORIGINAL PURCHASER THAT THE COMPANY’S POWER TOOLS ARE FREE FROM DEFECTS IN MATERIALS AND WORKMANSHIP. For One (1) year following the date of purchase, Sioux Tools will repair or replace, at Sioux Tools’ option, any part that is defective in materials or workmanship. All warranty requests or claims must be made no later than 60 days following the end of the 1‑year warranty period. Repair or replacement shall be at the election and expense of Sioux Tools, and is the exclusive remedy in place of all other rights and remedies.

NO OTHER WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AND ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. Sioux Tools’ warranty applies only to new products purchased from Sioux Tools. or its authorized distributors.

Sioux Tools does NOT provide warranty for products subjected to abnormal use.

Abnormal use includes: misuse, accident, modification, unreasonable use, neglect, lack of maintenance, or use after the tool is significantly worn or repaired by someone other than Sioux Tools or its Authorized Service Representatives.

A consumable product or part is warranted at the time of sale, only against defects in workmanship and materials that prevent its use. Consumable items are goods reasonably expected to be used up or damaged during use, including but not limited to drill bits, saw blades, grinding discs, sanding discs, batteries, and light bulbs.

SIOUX TOOLS SHALL NOT BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL COSTS OR DAMAGES INCURRED BY THE PURCHASER OR OTHERS (including, without limitation, lost profits, revenues, anticipated sales, business opportunities or goodwill, interruption of business and any other injury or damage.) This warranty is non‑transferable. Sioux Tools reserves the right to make changes in design and/or construction at any time without incurring any obligation related to tools previously sold.

9-7-21

(3)

1

ACC Accessory AER Aerospace FOR Force Tool IND Industrial Tool

US $ DISC SHIP

CATALOG NO. DESCRIPTION PRICE CODE CODE

Discount Code Legend:

US $ DISC SHIP

SHIP Code Legend:

A Ship within 2 to 5 days B Ship within 5 to 10 days C Ship within 2 to 3 weeks

CNR Ship within 2 to 3 weeks — Non-returnable S Call for delivery

SNR Call for delivery — Non-returnable

1198 LUBRICANT-6 OZ 23.20 ACC C

1198-1B LUBRICANT (2LBS) 88.60 ACC C

1198-2B LUBRICANT (6LBS) 181.00 ACC C

1211B WOOL POLISHING PAD 10 PK 270.20 ACC B 1211BK100 WOOL POLISHING PAD 100PK 2,080.40 ACC B 1220 LOOP POLISHING PAD (10 PACK) 321.30 ACC B

1232A-04 GREASE 4 OZ 18.60 ACC C

1232A-1 GREASE 1 QT. 63.20 ACC C

1238L PORT POLISHER-AIR (LEVER HDL) 1,322.10 IND C

1285L 7IN AIR GRINDER (LEVE 1,253.60 IND B

1287L 7 AIR SANDER (LEVER) 1,253.60 IND B

1290 AIR SANDER 954.50 IND C

1290L SANDER 1,001.30 IND C

1291 AIR GRINDER 954.50 IND C

1291L SIOUX GRINDER WITH PADDLE TRIG 1,001.30 IND C

1292 AIR POLISHER 954.50 IND C

1292L AIR POLISHER 3000 RPM W/LEVER 1,001.30 IND C 1296 3 SERS AIR POLISHER 2000 RPM 954.50 IND C

1300 REC. AIR SAW 1,510.50 IND A

1316 MALE-NIPPLE (1/4 PT) 12.60 ACC C

1317 3/8" NPT MALE COUPLER 53.30 ACC C

1318 MALE-NIPPLE (1/2 PT) 17.10 ACC C

1326B AIR HOSE 1/4" NYLON RECOIL RED 64.90 ACC C 1327B AIR HOSE 3/8IN NYLON RECOIL 93.30 ACC C

1335B VALVE AIR ADJ 36.00 ACC C

1338-25 1/4IN AIR SWIVEL CONNECTOR 26.40 ACC C

1338-38 3/8IN NPT AIR SWIVEL 43.00 ACC C

1338-50 1/2IN NON-REGULATED AIR SWIVEL 61.00 ACC C 1338FC-25 FLOW CONTROL SWIVEL REGULATOR 30.80 ACC C

1376-10 AIR HOSE 10 FOOT 104.10 ACC C

1391B QUICK CHANGE COUPLER 1/4 PT 48.80 ACC C 1392B 3/8" NPT QC COUPLER SOCKET 71.40 ACC C 1393 QUICK CHANGE COUPLER 1/2 PT 85.20 ACC C 1395 FEMALE COUPLER NIPPLE 1/4 PT 10.90 ACC C 1396 FEMALE COUPLER NIPPLE 3/8 PT 11.50 ACC C

1420 SGHT. DRL 1/4 CHK 499.60 IND C

1464 DRILL AIR 1/2IN (2000 RPM) 1,313.20 IND C 1465 AIR 3/8IN DRILL-GRIP-1000 RPM 1,313.20 IND C 1465-1/2 AIR 1/2IN DRILL-GRIP 1000 RPM 1,313.20 IND C 1466 AIR 1/2IN DRILL-GRIP-550 RPM 1,313.20 IND B 1641HW HOSE WHIP ASSY 12IN X7/8IN 24 127.90 ACC CNR

1654B AIR REGULATOR 3/4IN 189.10 ACC C

1670 F-R-L UNIT, 1/2NPT 175.00 ACC B

1810 SAW BLADE 6" X 14TPI (5PK) 33.60 ACC C 1811 SAW BLADE 6" X 18TPI (5PK) 37.00 ACC C 1812 SAW BLADE 4" X 18TPI (5PK) 32.30 ACC C 1813 SAW BLADE 4" X 14TPI (5PK) 32.70 ACC C 1814 SAW BLADE 6" X 24TPT (5PK) 30.40 ACC C 1815B SAW BLADE 6" X 10TPI (5PK) 21.90 ACC C 1816 SAW BLADE 6" X 6TPI (5PK) 35.90 ACC C 1819 SAW BLADE 12" X 5/8TPI (5PK) 71.40 ACC C 1823 BLADE BIMETAL 18TPI, SET OF 5 39.50 ACC C 1824B BLADE BIMETAL 24TPI 4IN LON 39.50 ACC C 1825 BLADE BI METAL 32TPI(PACKSOF5) 39.50 ACC C

1980 AIR ROUTER 1,230.20 IND C

1980A AIR ROUTER-1/4IN COLLET 1,291.40 IND C 1981F AIR ROUTER-1/2IN COL(W/HAND GR 1,461.30 IND C 1982A AIR ROUTER 1/4IN COLLET (LARGE 1,610.00 IND C 1985-1/2 AIR DIE GRINDER (1/2IN CHUCK C 890.60 IND C 1985A DIE GRINDER (WITH 3/8IN COLLET 939.30 IND C 1991 ASSY-LAMINATE TRIMMER BASE 144.50 ACC C

1992 ASSY-ROUTER BASE 58.60 ACC B

1993 ASSY-3IN TEMPLATE GUIDE 55.40 ACC C

1994 ASSY-2IN TEMPLATE GUIDE 43.60 ACC C

1995 ROUTER HEAD ASSY 159.60 ACC C

1996 ROUTER HEAD ASSY 3IN BASE 304.50 ACC C 1AM1141 NMBR 1 ANGLE 45 DEG LEV ST 1,079.70 IND B 1AM1141-51K SEALANT KIT TOOL 1,512.30 IND C 1AM1141SRK KIT 45 DEG 1AM W/CUTTERS 1,191.90 IND C 1AM1151 1 ANGLE LEV START 90 DEG 1,048.10 IND B 1AM1151SRK KIT 90 DEG 1AM W/CUTTERS 1,191.90 IND B 1AM1441 1 ANG LEV ST,N-R,2200RPM,45 948.40 IND C

1AM1451 1 ANG LEV ST N-R 22 887.70 IND B

1AM1452 1 AIRCRAFT ANG LEV START,NON 948.40 IND C

1AM1541 1 ANGLE LEVER 2800R 887.70 IND A

1AM1542 1 AIRCRAFT ANGLE LEVER START 948.40 IND C 1AM1551 ANGLE DRILL LEVER 28000RP 887.70 IND A

1AM1552 AIRCRAFT DRILL 948.40 IND C

1AM2101 5.7N/M R/ANGLE DRIVER 1,185.70 IND C 1AM2102 1 ANGLE LEV ST REV 80 1,282.20 IND C 1AM2105 1 ANGLE LEVER START REV 800RP 1,405.70 IND C 1AM2106 1 ANG LEV ST,REV,800RPM,DIRE 1,185.70 IND C 1AM2201 1 ANG LEV ST,REV,1100RPM,DIR 1,185.70 IND C 1AM2205 1 ANG LEV ST,REV,1100RPM,ADJ 1,405.40 IND C 1AML1451 1 ANG LEV ST N-R 22 891.00 IND C 1AML1541 1 ANGLE LEVER 2800R (LOCK) 891.00 IND B 1AML1551 ANGLE DRILL LEVER 28000RP 891.00 IND B 1SM2103 1 STRAIGHT LEV START,REV,800 956.60 IND C

1SM2105Q SCREWDRIVER 1,059.80 IND C

1SM2107 SCREWDRIVER INLINE 931.00 IND C

1SM2205Q 1 ST LEV START,REV,1100RPM,A 1,059.80 IND C 1SM2305Q 1 ST LEV START REV 1500RPM, 1,059.80 IND C 1SM2405 1 ST LEV START,REV,2200RPM,A 954.50 IND C 1SM2405Q 1 STRAIGHT LEVER START, REV, 1,059.80 IND C 1SM2407 1 ST LEV START,REV,2200RPM,S 931.00 IND C

1ST2108Q SCREWDRIVER 1,059.50 IND C

1ST2208Q SCREWDRVR TORQ CONTL 1100RPM 1,059.50 IND C

2187 CHISEL, 7IN BLANK HARDENED, S 14.80 ACC CNR 2188 CHISEL, 7IN FLAT 3/4IN WIDE 15.70 ACC CNR 2189 CHISEL, 7IN FLAT 1-3/8IN WIDE 16.90 ACC CNR 2190 CHISEL, 7IN SPOON 1 3/8IN WID 16.90 ACC CNR 2191 CHISEL, 7IN SPOON 2IN WIDE, S 35.80 ACC CNR 2192 CHISEL, 12IN FLAT 3/4IN WIDE 27.80 ACC CNR 2193 CHISEL, 12IN FLAT 1-3/8IN WID 21.70 ACC CNR 2194 CHISEL, 12IN SPOON 1-3/8IN WI 21.60 ACC CNR 2195 CHISEL, 12IN SPOON 2IN WIDE, 33.50 ACC CNR 2196 CHISEL, 18IN FLAT 3/4IN WIDE 27.40 ACC CNR 2197 CHISEL, 18IN FLAT 1-3/8IN WID 26.80 ACC CNR 2198 CHISEL, 18IN SPOON 1-3/8IN WI 26.10 ACC CNR 2199 CHISEL, 18IN SPOON 2IN WIDE, 58.70 ACC CNR

2201B CUTTERS 36.10 ACC C

2202B CHISEL #910-5/8 28.50 ACC C

2203 RIVET BUSTERS 28.50 ACC C

2204 EXT CHISELS 36.10 ACC C

2205 SCRAPER 36.10 ACC C

2206 PUNCHES 34.50 ACC C

2207 SPRING 14.00 ACC B

2208 SPRINGS 31.30 ACC B

2210B METAL PUNCHES 46.30 ACC C

2212 SPOT WELD BREAKER 51.20 ACC C

2213 MUFFLER SPLITTERS 34.90 ACC C

2214B EDGERS 36.10 ACC C

2215 CHISEL BLANK 28.50 ACC B

2216 FORK TOOL 97.20 ACC C

2217B TIE ROD RUST BREAKER 36.40 ACC C

2218 BUSHING SLITTER + REMOVER 27.80 ACC C

2219 BUSHING INSTALLER 54.50 ACC C

2220 CHISELS 27.80 ACC C

2229 BUTTON HEAD SETS 34.90 ACC C

2230B BUTTON HEAD SETS 39.60 ACC C

2231 BUTTON HEAD SETS 40.10 ACC C

2232 RD HEAD SETS 32.50 ACC C

2234B RD HEAD SETS 51.80 ACC C

2236 BRAZIER HEAD SETS 45.20 ACC C

2237B BRAZIER HEAD SETS 59.40 ACC C

2238 BRAZIER HEAD SETS 43.50 ACC B

2239 BRAZIER HEAD SETS 75.50 ACC C

2240 UNIVERSAL HEAD 75.50 ACC C

2241B 1/8" UNIVERSAL RIVET SET 75.50 ACC C

2242B UNIVERSAL HEAD SET 64.50 ACC C

2243B UNIVERSAL HEAD SET 59.40 ACC C

2244 BUTTON HEAD RIVET SETS 68.50 ACC C

2245 RD HEAD RIVET SETS 67.00 ACC C

2246 BRAZIER HEAD RIVET SET 56.70 ACC B

(4)

CATALOG NO. DESCRIPTION PRICE CODE CODE CATALOG NO. DESCRIPTION PRICE CODE CODE

2247 UNIVERSAL HEAD RIVET SETS 74.00 ACC B

2259 NEEDLE 5IN (SET OF 12) 20.60 ACC B

2260B NEEDLE SET OF 19 (5IN X .125) 34.10 ACC C 2262 NEEDLE SET OF 19 (7IN X .125) 13.50 ACC B 2270 CHUCK QUICK CHANGE AIR HAMMER 32.70 ACC B 2287 CHISEL, 7IN BLANK HARDENED, O 15.70 ACC CNR 2288 CHISEL, 7IN FLAT 3/4" WIDE 15.70 ACC CNR 2289 CHISEL, 7IN FLAT 1-3/8IN WIDE 23.20 ACC CNR 2290 CHISEL, 7IN SPOON 1-3/8IN WID 16.90 ACC CNR 2291 CHISEL, 7IN FLAT 2IN WIDE, O 48.70 ACC CNR 2292 CHISEL, 12IN FLAT 5/8IN WIDE, 19.60 ACC CNR 2293 CHISEL, 12IN FLAT 1-3/8IN WID 21.60 ACC CNR 2294 CHISEL, 12IN SPOON 1-3/8IN WI 21.70 ACC CNR 2295 CHISEL, 12IN FLAT 2IN WIDE, 33.50 ACC CNR 2296 CHISEL 18" FLAT 5/8" WIDE 25.40 ACC CNR 2297 CHISEL, 18IN FLAT 1-3/8IN WID 26.10 ACC CNR 2298 CHISEL, 18IN SPOON 1-3/8IN WI 26.10 ACC CNR 2299B CHISEL, 18IN SPOON 2IN WIDE, 37.50 ACC CNR

2300-4 BALANCER 2-4 LB CAP 137.70 ACC C

2300-8 BALANCER 280.70 ACC C

2306 SILENCER 43.30 ACC C

2308 WRENCH 20.40 ACC C

2311 4IN X 3/8IN DIAMOND WHEEL 149.40 ACC B

2314B GUARD 115.30 ACC C

2316B GUARD 9IN 199.00 ACC C

2317 GUARD 7IN 199.00 ACC C

2336 GUARD 58.30 ACC C

2337 GUARD 57.90 ACC C

2338 GUARD VERTICAL 3IN 72.70 ACC C

2339 GUARD 6IN STATIONARY CUP WHEEL 793.50 ACC C

2341 GRINDING WHEEL GUARD 103.90 ACC B

2344 PAD - 5IN BACKING 69.90 ACC B

2346B GUARD 3IN WHEEL 39.70 ACC C

2347 GUARD 4WHEEL 34.10 ACC C

2349B GUARD 9IN FOR DCW 76.60 ACC B

2352 QUICK CHANGE CHUCK FOR 1/4IN H 54.40 ACC B

2355B AUXILIARY HANDLE 64.10 ACC C

2357 HANDLE - AUXILIARY 23.10 ACC C

2362 SIDE HANDLE 95.50 ACC C

2364 DISC BACKING 5IN 74.50 ACC C

2366 WRENCH CLUTCH ADJUSTMENT 1 PH 12.30 ACC C

2387 PISTON STANDARD STEEL 108.80 ACC CNR

2388 PISTON STANDARD STEEL, 2IN LO 90.20 ACC CNR 2390 PISTON CARBIDE TIPPED, STAR P 215.20 ACC CNR 2391 PISTON SOLID CARBIDE, CHISEL 215.20 ACC CNR

2470 QUICK CHANGE RETAINER 229.70 ACC CNR

270A RIVET HAMMMER 554.60 IND A

270A-2 AIR HAMMER SHORT BARREL 554.60 IND B

270A-4 AIR HAMMER LONG BARREL 609.00 IND A

288 OIL-AIR MOTOR (1/2 PT) 14.50 ACC C

288-1 OIL-AIR MOTOR (1 QT) 22.20 ACC C

288-2 OIL-SIOUX AIR MOTOR(2 LITRE) 31.80 ACC C

289A GREASE 9.30 ACC C

289A-1 GREASE 2 LB CAN 38.30 ACC C

289A-2 GREASE 6 LB CAN 108.30 ACC C

2925-10 SKIRT 5/8 DIA CUTTER 44.10 ACC B

2925-7 SKIRT 7/16 DIA CUTTER 63.60 ACC C

2925-8B SKIRT 1/2 DIA CUTTER 27.80 ACC C

2925-9 SKIRT 9/16" DIA CUTTER 44.10 ACC B 2925-9W SKIRT 9/16" DIA CUTTER WIDE 45.40 ACC B 2S1310 1/4 ANGLE AIR DRILL 2200 RPM 832.70 IND CNR

2S1330 3/8 ANGLE DRILL 832.70 IND CNR

2S2103AQ ANGLE AIR SCREWDRIVER-1000RPM- 1,042.20 IND CNR 2S2103Q AIR SCREWDRIVER-1000RPM POS. 1,094.80 IND CNR 2S2105Q AIR SCREWDRIVER-1000RPM ADJ. 1,357.10 IND CNR 2S2107 Z HANDLE SCREWDRIVER 866.50 IND CNR 2S2110 1/4 ANGLE AIR DRILL - 1000 RPM 872.50 IND CNR 2S2130 3/8 ANGLE AIR DRILL - 1000 RPM 872.50 IND CNR 2S2203AQ ANGLE AIR SCREWDRIVER-1600RPM- 1,042.20 IND CNR

2S2207 2S SERV SCRDRV 866.50 IND CNR

2S2230 3/8 ANGLE AIR DRILL 872.50 IND CNR

2S2300SR 2S ANGLE AIR,REV,2200RPM,SKI 1,016.50 IND C 2S2303AQ ANGLE AIR SCREWDRIVER-2200RPM- 1,042.20 IND CNR 2S2305Q AIR SCREWDRIVER-2200RPM ADJ. 1,357.10 IND CNR 2S2307 ANGLE AIR SCREWDRIVER-2200RPM 866.50 IND CNR

2S2310 REV. Z HANDLE DRILL 872.50 IND CNR

2S2330 3/8 ANGLE AIR DRILL 872.50 IND CNR

30002 CHUCK KEY K30 8.00 ACC B

30011B KEY CHUCK JACOBS K32 9.40 ACC C

35545R WRENCH SPANNER 2.50 ACC B

3A1140 3 AIR ANGLE DRILL-1/2IN-360 RP 2,166.00 IND C 3A1240 3 ANGLE AIR DRILL-1/2IN-600 RP 2,166.00 IND C 3A1530 3 ANGLE AIR DRILL 3/8IN-1800 R 1,931.70 IND C 3A2102 3 AIR ANGLE NR-REV-300-DIRECT 2,429.40 IND C 3A2104 3 AIR ANGLE NR-REV-300-DIRECT 2,429.40 IND C

3A2108 1/2" SQ DR NR TC 300REV 3,102.50 IND C 3A2140 3 ANGLE AIR DRILL-1/2-REV-300 2,382.70 IND C 3A2208 3 AIR ANGLE NR-REV-480-T.C.-1 2,850.80 IND C 3A2240 3 ANGLE AIR DRILL-1/2-REV-480 2,382.70 IND C 3A2340 3 ANGLE AIR DRILL-1/2IN-REV-70 2,382.70 IND C 3A2430 3 AIR ANGLE DRILL-3/8IN-REV-10 2,382.70 IND C 3P1140 3 PISTOL AIR DRILL-1/2IN-360 R 1,471.80 IND C 3P1240 3 PISTOL AIR DRILL-1/2IN-650 R 1,371.60 IND C 3P1340 3 PISTOL AIR DRILL-1/2IN-1000 1,592.40 IND C 3P1430 3 PISTOL AIR DRILL-3/8IN-1400 1,592.40 IND C 3P1530 3 PISTOL AIR DRILL-3/8IN-2150 1,371.60 IND C 3P1540 3 PISTOL AIR DRILL 1/2IN 2150 1,311.50 IND C 3P1640 3 PISTOL AIR DRILL-1/2IN-2650 1,371.60 IND C 3P2140 3 PISTOL AIR DRILL-1/2IN-REV-3 1,803.10 IND C 3P2340 3 PISTOL AIR DRILL-1/2IN-REV-8 1,803.10 IND C 3T1140 3 "T" HDL AIR DRILL-1/2IN-36 1,674.40 IND CNR 3T1340 3 T HDL AIR DRILL 1/2 IN 10 1,674.40 IND CNR 3T1530 3 "T" HDL AIR DRILL-3/8IN-21 1,235.40 IND CNR

3T1630 3 T HNDL AIR DRILL 1,416.70 IND B

3T1630LTH 3 T HDL AIR DRILL 3/8IN 2 1,334.90 IND CNR 3T1640 3 "T" HDL AIR DRILL 1/2IN-26 1,416.70 IND CNR 3T2303 3 AIR "T" HDL SD-REV-850-POS 1,779.60 IND CNR

439 GREASE GUN 17.80 ACC C

442 GREASE GUN 30.40 ACC C

469A GREASE NOZZLE 8.30 ACC C

500 ABR. PROD. SPINDLE 36.30 ACC C

5000A 1/2 SQ IMP WRCH TWIN HAMMER 339.40 FOR A 5000AL MODEL 5000A W 2IN EXTNDED ANVI 369.70 FOR C

5002 GRIP LARGE 16.50 ACC C

5007 VALVE REV RATCHET 347.70 FOR B

5009 1/4 AIR RATCHET 347.70 FOR B

5011 3/8 RATCHET 280.70 FOR A

5013 1/2IN RATCHET W/COMPOSITE GRIP 292.20 FOR B 5038C PISTOL IMPACT 3/8" FR 430.10 FOR B 5039C IMPACT 3/8" PIN ANVIL 441.30 FOR B 5045 3/8IN BUTTERFLY THROTTLE IMPAC 491.10 FOR B 5045P 3/8IN BUTTERFLY THROTTLE IMPAC 497.60 FOR B

504A RUBBER DRUM REPLACEMENT 101.40 ACC C

5050C IMPACT 1/2" FRICTION RING 462.40 FOR B 5050CL IMPACT 1/2" FRICTION RING LONG 479.20 FOR B 5051C IMPACT 1/2" PIN ANVIL 473.70 FOR B

5053A 1/4 MINI DIE GRINDER 149.60 FOR A

5053AM6 MINI DIE GRINDER 172.30 FOR C

5054A 1/4 DIE GRINDER 149.60 FOR A

5054A-19K 1/4 DIE GRINDER 19K RPM 149.60 FOR A 5054A-5055A PROMOTIONAL FORCE ABRASIVE KIT 320.40 FOR B

5054AM6 1/4 DIE GRINDER 149.60 FOR B

5055A 1/4 DIE GRINDER 180.70 FOR A

5055AM6 6MM MINI 189.60 FOR C

5056 COMPOSITE GRIP RA DIE GRINDER 324.10 FOR B 5075C IMPACT 3/4" FRICTION RING 1,092.00 FOR B 5075CL IMPACT 3/4" FRICTION RING LONG 1,201.20 FOR B 5090C IMPACT 1" FRICTION RING 1,314.60 FOR B 5092C IMPACT 1" FRICTION RING 1,782.40 FOR B 5092CL IMPACT 1" FRICTION RING LONG 1,893.90 FOR B 5093C D-HANDLE IMPACT 1" FR 1,916.10 FOR B 5093CL D-HANDLE IMPACT 1" FR LONG 2,027.50 FOR B

5095C D-HANDLE IMPACT FR 1,548.60 FOR B

5095CL D-HANDLE 1" IMPACT FR LONG 1,615.40 FOR B 510 DEPRESSED CENTER WHEEL HOLDER 47.10 ACC C

512 NUT LOCK 15.20 ACC C

5205 BACKING PAD 5IN 19.60 ACC C

5207 BACKING PAD 7IN 25.00 ACC B

520DA DRUM ABR 180 GRIT (5 PCK) 74.00 ACC C 521DA SANDING DRUM SHEET (5 PCK) 65.70 ACC C 522DA SANDING DRUM SHEET (5 PCK) 74.00 ACC C

523DA DRUM ABR 50 GRIT (5 PCK) 74.00 ACC C

524 NUT 18.30 ACC B

5250C IMPACT 1/2" FRICTION RING 462.40 FOR B

5262 NEEDLE SCALER PISTOL 458.90 FOR B

5263 NEEDLE SCALER SHORT 243.90 FOR A

5265 5 125MM RIGHT ANGLE 670.60 FOR A

5266 NEEDLE SCALER 539.40 FOR B

5268 GRINDER ANGLE 671.90 FOR A

5272A SHORT AIR HAMMER 133.40 FOR B

5273A MEDIUM AIR HAMMER 159.80 FOR B

5274A LONG AIR HAMMER 189.60 FOR C

5285 5IN R.A. GRINDER 626.80 FOR A

5287A SANDER ANGLE AIR 7IN 6000 RPM 749.30 FOR B 5300A HIGH SPEED AIR SAW W/BLADES 350.50 FOR A

5338A IMPACT 3/8IN COMPOSITE 349.00 FOR C

5338AP IMPACT 3/8IN COMP PIN ANVIL 389.80 FOR C

5350A IMPACT 1/2IN COMPOSITE 366.30 FOR B

5350AL IMPACT COMP. 1/2" LONG ANVIL 400.30 FOR C 5350AP IMPACT 1/2IN COMP PIN ANVIL 391.00 FOR C

5375A IMPACT 3/4IN COMPOSITE 925.00 FOR C

5375AP IMPACT 3/4IN COMPOSITE 881.80 FOR C

5430KL DRILL ANGLE AIR 3/8IN KEYLESS 484.60 FOR C 5430LC DRILL ANGLE AIR 3/8IN REV 1200 469.80 FOR C

(5)

3

US $ DISC SHIP

CATALOG NO. DESCRIPTION PRICE CODE CODE US $ DISC SHIP

5434 DRILL AIR STRAIGHT NON-REV 250 261.40 FOR A 5434KL DRILL AIR STRAIGHT NON-REV 250 261.40 FOR C

544 SANDING DISC HOLDER 65.20 ACC B

5440KL 3/8IN KEYLESS CHUCK PISTOL GR 243.90 FOR B

5445R AIR DRILL 270.30 FOR A

5445RKL 3/8 K/LESS CHUCK 270.30 FOR A

545 SANDING DISC HOLDER 7IN 63.60 ACC B

5450R 1/2 KEYED CHUCK P/GRIP 413.30 FOR B

5450RKL 1/2 DRILL-KEYLESS CHUCK-P/GRIP 413.30 FOR C

545H DISC HOLDER 88.10 ACC B

548 DISC PAD 19.40 ACC B

548H DISC PAD-H D 20.10 ACC B

5540 PISTOL GRIP SANDER 226.50 FOR A

5558A 6 DA SANDER 152.70 FOR B

5560 INLINE SANDER 341.70 FOR C

5564A 3IN CUT OFF TOOL W/COMFORT GRI 140.80 FOR A

562 NUT SANDING DISC 9.60 ACC C

581 DISC-BACKING 5IN 61.50 ACC B

583JV PAD 6 HOOK VACUUM 35.60 ACC C

585 5IN PSA TAPERED EDGE PAD 26.10 ACC C

585JV PAD 5IN HOOK VACUUM 40.10 ACC C

585V PAD - 5IN VACUUM 33.00 ACC C

586 BACKING DISC (PKG OF 6) 26.10 ACC B

587M PAD BACKING, 2IN MEDIUM 45.60 ACC B

588M PAD BACKING, 3IN MEDIUM 52.80 ACC C

591 PAD 3IN STD PSA SIOUX 27.90 ACC C

591J PAD 3IN STD HOOK SIOUX 27.90 ACC C

592 PAD 3.5IN STD PSA SIOUX 28.50 ACC C

592J PAD 3.5IN STD HOOK SIOUX 28.50 ACC C

593 BACKING PAD-5IN LOW PROFILE-NO 29.90 ACC B 593J BACKING PAD-5IN LOW PROFILE-NO 36.10 ACC C 593JV BACKING PAD-5IN LOW PROFILE-VA 36.10 ACC C 593SV BACKING PAD 5IN SCREEN VAC SX 41.40 ACC C 593V BACKING PAD-5IN LOW PROFILE-VA 29.90 ACC C 594 BACKING PAD-6IN HIGH PROFILE-T 33.00 ACC C 594J BACKING PAD-6IN HIGH PROFILE-T 36.10 ACC C 594JV BACKING PAD-6IN HIGH PROFILE-T 36.10 ACC C 594SV BACKING PAD 6IN SCREEN VAC SX 44.50 ACC C

594V 6 BACKING PAD 36.10 ACC C

5977 DIE GRINDER - PENCIL 385.60 FOR A

5977-78A-79A 5977, 5978A & 5979A 813.30 FOR B 5978A PENCIL DIE GRINDER, 54,000RPM 198.40 FOR A 5979A PENCIL DIE GRINDER, 70,000RPM 254.20 FOR A

5980 AIR ENGRAVING PEN 186.70 FOR A

650B 2IN INROL LOCIN PAD 13.30 ACC C

65692 GUARD WHEEL 4 1/2IN TYPE 27 50.40 ACC B 658 AIR SANDER - 5IN LEVER - MUFFL 550.40 IND C

68613-12 GUIDE - ROUTER COLLAR 57.50 ACC C

68613-14 GUIDE ROUTER COLLAR 62.60 ACC C

68813 WIRE BELT FINE 23MM STRAIGHT 28.00 ACC C 68814 COARSE WIRE BELT 23MM BENT 28.00 ACC B

68815 RUBBER ERASER MBX 23MM 47.90 ACC B

68848 SS WIRE BELT COARSE BENT 44.50 ACC C 68911 WIRE BELT STEEL MEDIUM 23MM 28.00 ACC C 68914 WIRE BELT S.S. MEDIUM 23MM 43.60 ACC C 69005 3/8IN KEYLESS ROHM CHUCK 191.10 ACC C 69006 1/2IN KEYLESS ROHM CHUCK 249.80 ACC C 690V AIR SANDER-5IN PALM-MUFFLER-VA 533.00 IND B 690X AIR SANDER - 5IN PALM - REMOTE 565.70 IND C

697 6" AIR PALM SANDER 515.50 IND B

74059 3IN CUTOFF WHEEL GUARD 25.70 ACC C

74097 TYPE 27 3IN WHEEL GUARD 27.20 ACC C

74274A STABILIZER ASSY 208.90 ACC B

74375 1/4IN KEYLESS ROHM CHUCK 174.10 ACC B 74994A TETHER PLATE KIT FOR IW750 46.00 ACC C

77033 4IN CUTOFF WHEEL GUARD 33.60 ACC C

77034 5IN CUTOFF WHEEL GUARD 40.50 ACC B

77035 6IN CUTOFF GUARD 47.30 ACC C

77057TA THREADED ADAPTER (CONE WHEEL) 28.40 ACC B 77605 5" TYPE-27 GRINDING GUARD 42.20 ACC B

79100 RETAINER GRINDING WHEEL 29.60 ACC B

79101 GUARD 5" T-27 40.10 ACC B

79665 4" T-27 FLAT BACK GUARD 40.00 ACC B 843 WOOL POLISHING BONNET (10PK) 270.20 ACC B

846C RUBBER POLISHING PAD HOLDER 54.90 ACC C

847 HOOK BACKING PAD 63.60 ACC C

AG16D106 AGL GNDR 1.6HP 6" 10K RPM T27 925.00 IND B AG16D1245 AGL GNDR 1.6HP 4.5" 12KRPM T27 900.00 IND B AG16D125 AGL GNDR 1.6HP 5" 12K RPM T27 900.00 IND B AG22D847 AGL GNDR 2.2HP 7" 8,400RPM T27 1,075.00 IND B AS16S125 AGL SNDR 1.6 HP 5" 12K RPM 900.00 IND B AS16S847 AGL SNDR 1.6 HP 7" 8,400 RPM 925.00 IND B AS16SG847 AGL SNDR 1.6 HP 7" 8,400 GUARD 975.00 IND B AS22S847 AGL SNDR 2.2 HP 7" 8,400 RPM 1,050.00 IND B

CPLR-TOOL COUPLER SERVICE TOOL 89.70 ACC C

DR1422 DRILL STRAIGHT 1/4IN 3600 RPM 524.70 IND C DR1467 AIR 1/2IN DRILL-GRIP-375 RPM 1,240.00 IND C DR3P2240 NMBR3 PISTOL AIRDRILL 1/2IN RV 1,803.10 IND C DVRS-EA REMOTE START ELECTRIC ADAPTER 200.80 ACC C DVRS-PA REMOTE START PNEUMATIC ADAPTER 294.10 ACC C FDR5430 DRILL ANGLE AIR 3/8IN REV, 480.70 FOR B FDR5440 3/8IN KEYED CHUCK,PISTOL GRIP 243.90 FOR B

GO459-34 6 IN PAD PSA 35.10 ACC C

GO459-34V 6 IN PAD PSA VAC 35.10 ACC C

GO459-34VHL 6 IN PAD HOOK N LOOP VAC 35.10 ACC C

GO459-35 8 IN PAD PSA 48.40 ACC C

GO459-35V 8 IN PAD PSA VAC 48.40 ACC C

GO459-60SNH 6 IN GEARED SNDR NON VAC HOOK 415.90 IND C GO459-60SNP 6 IN GEARED SNDR NON VAC PSA 415.90 IND C GO459-60SRH 6 IN GEARED SNDR REM VAC HOOK 415.90 IND C GO459-60SRP 6 IN GEARED SNDR REM VAC PSA 415.90 IND C GO459-80SNH 8 IN GEARED SNDR NON VAC HOOK 415.90 IND C GO459-80SNP 8 IN GEARED SNDR NON VAC PSA 415.90 IND C GO459-80SRH 8 IN GEARED SNDR REM VAC HOOK 415.90 IND C GO459-80SRP 8 IN GEARED SNDR REM VAC PSA 415.90 IND C

HB02 HOLE BROACH DRIVE PIN 21.20 ACC S

ID375AP-2Q IMPACT DRIVER 550.40 IND A

ID375AP-2QRR IMPACT DRIVER RAPID REVERSE QC 574.00 IND B IW1000MH-5S H.D. #5 SPLINE ANVIL IMPACT WR 3,200.00 IND B IW1000MH-8H 1 IN H.D. IMPACT WRENCH 2,900.00 IND B IW1000MH-8H6 1 IN H.D. LONG ANVIL IMPACT 3,200.00 IND B IW1000MP-8H 1" AIR IMPACT WRNCH HR 1,676.80 IND B IW1000MP-8H5 1" AIR IMPACT WRENCH LONG 1,699.40 IND B IW1000MP-8H8 1 SQ DR IMPACT WRENCH LONG 1,735.60 IND C IW150HAI-12H 1 1/2IN D HANDLE I T IMPACT 7,012.50 IND C IW150HAI-5S 5 SPLINE D HANDLE I T IMPACT 7,422.40 IND C IW150HAO-12H 1 1/2IN D HANDLE O T IMPACT 7,012.50 IND C IW150HAO-5S 5 SPLINE D HANDLE O T IMPACT 7,422.40 IND C

IW375AP-3F IMPACT WRENCH 550.40 IND C

IW375AP-3P IMPACT WRENCH 550.40 IND B

IW375AS-3P INLINE IMPACT DRIVER (PIN) 1HP 666.70 IND B IW38TBP-2Q IMPACT DRIVER 1/4" QC 568.00 IND A IW38TBP-3P IMPACT DRIVER 3/8" SQ. DR. 568.00 IND B IW500-3 TETHER PLATE BLACK OXIDE 9.20 ACC B IW500MP-4P 1/2IN IMPACT PREMIUM PIN ANVIL 462.70 IND B IW500MP-4P3 1/2IN IMPACT PIN ANVIL LONG 460.10 IND B IW500MP-4PT 1/2IN IMPACT PIN ANVIL TETHER 482.10 IND C IW500MP-4R 1/2IN IMPACT PREMIUM RING ANVL 462.70 IND A IW500MP-4R3 1/2" IMPACT RING ANVIL LONG 460.10 IND C IW500MP-7Q 7/16" IMPACT QC ANVIL 484.00 IND C IW500MP-BOOT IW500MP IIMPACT BOOT 11.70 ACC B IW750MP-6H 3/4" IMPACT - THRU HOLE ANVIL 867.00 IND B IW750MP-6P 3/4" IMPACT - PIN DETENT ANVIL 867.00 IND B IW750MP-6PT 3/4I IMPACT PIN ANVIL TETHER 892.50 IND C IW750MP-6R SIOUX 3/4 IMPACT WRENCH 867.00 IND A IW75BP-6H 3/4SQ PISTOL HDL IMPACT WRENCH 1,481.30 IND C IW75BP-8H 1 SQ PISTOL HDL IMPACT WRENCH 1,481.30 IND C

MG725L12R REPAIR LONG ANVIL 38.80 ACC B

MV-21 HEPA FILTER 294.10 ACC C

MV-49 2 CUFF ADAPTER 30.40 ACC C

MV-50 25FT HOSE AND CUFFS 127.40 ACC C

MV-51 FILTER PACKAGE 100.50 ACC C

MV-52 MICRO PREFILTER BAG 2PK 53.80 ACC C

MV-54 6FT VACUUM HOSE 51.30 ACC C

PS690 5" AIR PALM SANDER 514.20 IND C

PSG468-34HL 6 IN PAD HOOK N LOOP BLACK 35.10 ACC B PSG468-35HL 8 IN PAD HOOK N LOOP BLACK 48.40 ACC B PSG468-35VHL 8 IN PAD HOOK N LOOP VAC BLACK 49.60 ACC B

RO25-095 LOCK RING WRENCH 42.10 ACC C

RO25-096 VISE PLATE 56.90 ACC C

RO2510-44FNC 1/4 SHEET JITTERBUG SANDER 295.30 IND C RO2512-30FNH 3IN 3/32IN NON VAC HOOK 295.30 IND C RO2512-30FNP 3IN 3/32IN NON VAC PSA 295.30 IND C RO2512-30FRH 3IN 3/32IN REMOTE VAC HOOK 302.40 IND C RO2512-30FRP 3IN 3/32IN REMOTE VAC PSA 302.40 IND C RO2512-30FVH 3IN 3/32IN VENTURI VAC HOOK 323.50 IND C RO2512-30FVP 3IN 3/32IN VENTURI VAC PSA 323.50 IND C RO2512-30SNH 3IN 3/16IN NON VAC HOOK 295.30 IND C RO2512-30SNP 3IN 3/16IN NON VAC PSA 295.30 IND C RO2512-30SRH 3IN 3/16IN REMOTE VAC HOOK 302.40 IND C RO2512-30SRP 3IN 3/16IN REMOTE VAC PSA 302.40 IND C RO2512-30SVH 3IN 3/16IN VENTURI VAC HOOK 323.50 IND C RO2512-30SVP 3IN 3/16IN VENTURI VAC PSA 323.50 IND C