Built-in RFID reader ibell identification system. 2. Used for

Control of IP Door Entry Phone Stations using RFID cards Built-in RFID reader

iBell identification system

December 2020

3. Function description

The built-in RFID reader of the IP Door Entry Station is designed to identify incoming persons using chip cards, chip tags and mobile phones supporting NFC technology.

After successful and unsuccessful identification of the incoming person, it is possible to close the lock relay, take a picture from the camera, etc.

Any HTTP(s) server that supports the POST method can be used as the authentication server.

1. Features

•

•

•

•

•

2. Used for

•

•

•

•

•

Open the web interface of the IP Door Entry Phone Station on the RFID reader tab:

4. Built-in RFID reader configuration

Meaning of items:

Enable - activates the RFID reader (the period of detecting the presence of an RFID card is 0.5s)

Authentication server - URL address of any HTTP or HTTPs server that evaluates the validity of the attached RFID card.

URL must conform to standard format:

http[s]://[user[:password]@]host[:port][/[path]][?parameters]

The parameters that are part of this URL are only passed by the IP Door Entry Phone Station to the authentication server. It does not interfere with them in any way. Therefore, they are arbitrary in terms of the IP Door Entry Phone Station and can be used to pass other information specific to the authentication server used.

When communicating with the authentication server, the POST method is used, where the read card number is passed in the body of the message. The card number is not written to the parameters in the URL address.

The built-in RFID reader allows you to read more RFID cards at the same time. Then, all card numbers are passed in the body of the POST message as a list.

Actions to take on card authentication successful - If the authentication server responds to the POST message with the code 200 OK, the following actions will be performed, ie activating the tone, activating the relay, sending an e-mail message, including the option to insert camera images taken at the time the card was attached.

Actions to take on card authentication unsuccessful - If the authentication server responds to the POST message with the 403 Forbidden message, the following actions will be performed, ie activating the tone, activating the relay, sending an e-mail message, including the option to insert camera images taken at the time the card was attached.

The IP Door Entry Phone Station system variables can be used in the e-mail comment.

At the time of sending the e-mail, these system variables are supplemented as follows:

$Datum$ - current date DD.MM.YYYY format

$Date$ - current date YYYY-MM-DD format

$Time$ - current time HH:MM format

$Device$ - IP Door Entry Phone Station name

$Response$ - the text of the authentication server response The following variants apply to iBell.eu:

- RFID card accepted, user “Krejzla Josef”

- ERROR RFID card rejected

- WARNING deactivated RFID card was used

If you have any problems, please contact as at:

Step 1: Obtain login details on iBell.eu for the IP Door Entry Phone Station

If you already use iBell.eu as an IP PBX or as part of the iBell home mobile phone application, then you already have this login and will also use it in the RFID tab.

Otherwise, open the iBell.eu page in a web browser and ask for login details:

5. Connection to the evaluation HTTPs server iBell.eu

You will receive the following login details:

(for example)

Door phone User name: A555509 Door phone Password: P6411 Call group: C553425

Step 2: Set the authentication server URL

Open the web interface of the IP Door Entry Phone Station on the RFID reader tab:

In the Authentication server field, type:

https://ibell.eu:405?A=A555509&P=P6411

Where A555509 is the Door phone User name obtained in step 1 and P6411 is the Door phone Password also obtained in step 1.

The values must be adjusted according to reality !!!

Other items on this page must be filled in according to chapter 4. Build-in RFID reader configuration.

Step 3: Activate RFID cards on iBell.eu

Open the iBell.eu web interface on the RFID tab and log in using the obtained login data Call group: C553425 and Door phone Password: P6411 see above.

Creating an add-in card - press the Plus card -ID button and beep the new add-in card on the IP Door Entry Phone Station. Press the Refresh button and the card ID will appear in box.

Creating a removal card - press the Minus card -ID button and beep the new removal card on the IP Door Entry Phone Station. Press the Refresh button and the card ID will appear in the box.

Add an entry card to the list using the add-in card - beep the add-in card, and then beep the new card to be add. If you have a website table open, then you must refresh it using the Refresh button.

Remove an entry card from the list using the removal card - beep the removal card, and then beep the entry card to be removed. If you have a website table open, then you must refresh it using the Refresh button.

Add an entry card to the list using the web interface - press the button marked “+”

and beep the new card on the IP Door Entry Phone Station. Press the Refresh button and the card ID will appear in the table.

Remove an entry card from the list using the web interface - press the button marked “-” and beep the entry card to be removed on the IP Door Entry Phone Station.

Press the Refresh button.

This setting interface applies to all IP Door Entry Phone Station registered in the same Cxxxxxx call group. The evaluation does not distinguish at which entrance the RFID card was beeped.

If you have any problems, please contact as at:

[email protected]