Owner Manual Kone

(1)

lïåÉêÛë=açÅìãÉåí~íáçå=

= ₌ = = = «=OMNR=hlkb=éäÅ= = oÉîáëáçå=^=J=MQLMULNR= ^ää=êáÖÜíë=êÉëÉêîÉÇ=

ltkboÛp=j^kr^i=

j^pqbo

=

fk=`ljmif^k`b=tfqe=

b`=ifcqp=afob`qfsb=VRLNSLb`=

~åÇ=

qeb=ifcqp=obdri^qflkp=pKfK=NVVT=L=UPN=

=

pÉêá~ä==

kìãÄÉê=

QONQRPTT=

=

páíÉ==

^ÇÇêÉëë=

iáÑí=^I=

P=pí=m~ìäë=mä~ÅÉI=

`Ü~êäÉë=píêÉÉíI=

pÜÉÑÑáÉäÇI=

pN=Ok_=

(2)

Owner’s Documentation

OWNER’S DOCUMENTATION IN COMPLIANCE WITH

THE LIFTS DIRECTIVE 95/16/EC,

THE LIFTS REGULATIONS S.I. 1997/831

And

BS EN 81-1 : 1998 + A3 : 2009

Elevator Type - KONE MonoSpace

®

0. Introduction

1. Basic Documentation

1.1 Declaration Of Conformity 1.2 Basic Characteristics. 1.3 Log Book

1.4 Copies Of Examinations, Inspection Reports, Observations Etc.

2. Technical Documentation

2.1 Plans Of The Lift In The Building 2.2 Electric Schematic Diagrams

2.3 Basic Characteristics Of Safety Components 2.4 Basic Characteristics Of Ropes

3. Maintenance Instructions

3.1 General Maintenance Instructions For The Elevator 3.2 Maintenance Instructions For Safety Components 3.3 Periodical Inspections

4. Instructions For Use

4.1 Instructions For Normal Use Of The Elevator 4.2 Instructions For Rescue Operation.

5. Additional Information

5.1 Communication System Manual

(3)

Owner’s Documentation

Introduction

0. INTRODUCTION

The purpose and scope of this elevator user guide is to provide you with some general tips on how to get the best use from the elevator(s) in your building and what to do if the elevator should malfunction for some reason.

Safety and reliability are KONE's primary concerns and have been strongly emphasized in the design, manufacture, installation and maintenance processes of this elevator. The revolutionary elevator technology, together with KONE's quality, guarantees you a modern, ecologically-friendly elevator which will maintain its functionality in the years to come.

Planned preventive maintenance helps you take care of your elevator. You can ensure the future value of your investment by implementing a carefully-planned preventive maintenance program, carried out by a competent maintenance company. KONE has the experience and knowledge needed to plan and carry out a program that will meet all the maintenance needs of your elevator

Note that only Section 1 “Basic Documentation) is supplied on paper. Sections 2 (Technical Information), 3 (Maintenance), 4 (Operation) and 5 of the manual are provided on the enclosed CD-ROM in Adobe® Acrobat® PDF Format, in compliance with The Lifts Regulations 1997.

Most computers will be able to open the PDF file. If the file does not open you can download Adobe Reader®

from the Adobe®

website www.adobe.com.

The master copy must be maintained by the owner throughout the life of the elevator installation.

Printed copies of the manual should only include Section 1.2 “Basic Characteristics”. Copies should not include Sections 1.1, 1.3 and 1.4 since there is no requirement under the Lifts Regulations 1997 to maintain copies of the manual.

Notice This manual should be stored so that it is accessible to authorised persons if needed.

Notice MAINTENANCE ACCESS PANEL KEY

The keys to the Maintenance Access Panel and landing doors must be kept in a secure place inaccessible to unauthorized persons. The keys may be given only to competent maintenance persons as defined in Section 3.1.1.3.

Copyright

This document has been developed from the industry guideline for "Owner’s Documentation" published by the European Elevator Association.

All rights reserved. No part of the contents of this document may be copied, reproduced or transmitted in any form or by any means, or translated into another language or format, in whole or part, without prior written permission of KONE Corporation.

Copyright is held by KONE plc and KONE Corporation.

KONE EcoSpace™, MonoSpace®_{, MiniSpace™, S-MiniSpace™, EcoDisc}®_{, EcoDom}®_{, TranSys™, KoneXion}®_and

KRM and all other product names are trademarks or registered trademarks of KONE Corporation in various countries.

The proprietor of the elevator to which this manual relates, his employees and agents, have a licence to use the information contained herein for the sole purposes of operation and maintenance of the Elevator installation defined within this manual. Such information imparted to any such employee or agent shall be held as confidential by such employee or agent.

(4)

Owner’s Documentation

Introduction

National Statutory Requirements

In addition to The Lifts Regulations 1997 you may need to follow national statutory requirements that are not discussed in this document. Typical requirements include the following:

• Fire regulations • Safe Working rules

• Elevator maintenance regulations • Electromagnetic compatibility

Readers of this document must also take note of the following documentation: EN 81-1: Safety rules for the construction and installation of lifts - Part 1: Electric lifts

EN 12015: Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission

EN 12016: Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity

EN 81-21: Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 21: New passenger and goods passenger lifts in existing building

EN 81-58: Safety rules for the construction and installation of lifts - Examination and tests - Part 58: Landing doors fire resistance test

EN 81-70: Safety rules for the construction and installations of lifts - Particular applications for passenger and good passenger lifts - Part 70: Accessibility to lifts for persons including persons with disability

EN 81-71:Safety rules for the construction and installation of lifts - Particular applications to passenger lifts and goods passenger lifts - Part 71: Vandal resistant lifts

EN 81-72: Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 72: Firefighters lifts

EN 81-73: Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 73: Behaviour of lifts in the event of fire

Authorisation Notice

This publication is for informational purposes only. All persons participating in the maintenance of KONE equipment, or participating in the rescue of trapped passengers, and using these instructions must be familiar with KONE equipment and technology and must be qualified to perform such work.

Disclaimer Of Warranties And Liabilities

KONE reserves the right at any time to alter the product design, specifications and procedures reflected in this document.

NO STATEMENT CONTAINED IN THIS DOCUMENT IS TO BE CONSTRUED AS A WARRANTY OR CONDITION, EXPRESS OR IMPLIED, AS TO ANY PRODUCT, SPECIFICATION OR PROCEDURE, ITS MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE OR QUALITY, OR AS A MODIFICATION OR REPRESENTATION OF THE TERMS OF ANY PURCHASE AGREEMENT.

KONE DISCLAIMS ANY LIABILITY RESULTING FROM OR IN CONNECTION WITH THE USE OR DISCLOSURE OF INFORMATION IN THIS DOCUMENT. KONE HAS NO LIABILITY FOR TYPOGRAPHICAL OR OTHER ERRORS OR OMISSIONS CONTAINED IN THIS DOCUMENT OR ANYONE'S INTERPRETATION OF THE INSTRUCTIONS. THE USER OF THIS DOCUMENT ASSUMES ALL RISKS ASSOCIATED WITH THE USE OR DISCLOSURE OF THIS DOCUMENT.

(5)

Owner’s Documentation

Introduction

Illustration Notice

The illustrations in this manual (with the exception of project specific drawings) are generic and may differ in some cases from the material used for the actual elevator.

Audience

This document is intended for the elevator owner, competent maintenance company and authorities performing periodical inspections.

(6)

Owner’s Documentation

Contacts

Sales And Servicing Offices - KONE plc

KONE plc Call Centre

Tel :- 0800 652 0692

KONE plc Head Office

Global House, Station Place, Fox Lane North, Chertsey, Surrey, KT16 9HW Tel :- 0845 1 999 999 Fax :- 0870 770 1144

[email protected] www.kone.co.uk

KONE (NI) Ltd

Unit B2, 19 Heron Road, Sydenham Business Park, Belfast, BT3 9LE

Tel :- 028 9073 5900 (0845 330 5850 Outside office hours) Fax :- 028 9073 5901 [email protected]

(7)

Owner’s Documentation

Basic Documentation

1. BASIC DOCUMENTATION

1.1 Declaration Of Conformity

2 1.2 Detailed Specification

3 1.3 Log Book

5

(8)

lïåÉêÛë=açÅìãÉåí~íáçå=

_~ëáÅ=açÅìãÉåí~íáçå

= = = = = «=OMNR=hlkb=éäÅ= = ^ää=êáÖÜíë=êÉëÉêîÉÇ= O=E=NN=F=

ab`i^o^qflk=lc=`lkclojfqv=clo=^=jçåçpé~ÅÉ

∆

_=bibs^qlo=

fkpq^iibo=

il`^qflk=lc=fkpq^ii^qflk=

hlkb=éäÅ= däçÄ~ä=eçìëÉI= pí~íáçå=mä~ÅÉI= cçñ=i~åÉ=kçêíÜI= `ÜÉêíëÉóI= hqNS=Vet= iáÑí=^I= P=pí=m~ìäë=mä~ÅÉI= `Ü~êäÉë=píêÉÉíI= pÜÉÑÑáÉäÇI= pN=Ok_=

pÉêá~ä=kìãÄÉê=

QONQRPTT=

vÉ~ê=çÑ=fåëí~ää~íáçå=

OMNR=

hlkb= éäÅI= ÇÉÅä~êÉë= íÜ~í= íÜÉ= jçåçpé~ÅÉ∆_{= bäÉî~íçê= ÇÉí~áäÉÇ= ÄÉäçï= ãÉÉíëI= ~ë= Ñ~ê= ~ë= áí= áë= ïáíÜáå= çìê= ëÅçéÉ= çÑ=} áåÑäìÉåÅÉ=~åÇ=êÉëéçåëáÄáäáíóI=íÜÉ=ÑçääçïáåÖ=äÉÖáëä~íáçå=~åÇLçê=êÉÖìä~íáçåëK= qÜÉ=pìééäó=lÑ=j~ÅÜáåÉêó=Ep~ÑÉíóF=oÉÖìä~íáçåë=OMMU=EpKfK=OMMU=kìãÄÉê=NRVT=ÄÉáåÖ=íÜÉ=rh=íê~åëéçëáíáçå= çÑ=br=j~ÅÜáåÉêó=aáêÉÅíáîÉ=OMMSLQOLb`F=

qÜÉ= iáÑíë= oÉÖìä~íáçåë= NVVT= EpKf= NVVT= kìãÄÉê= UPN= ÄÉáåÖ= íÜÉ= rh= íê~åëéçëáíáçå= çÑ= iáÑíë= aáêÉÅíáîÉ= VRLNSLb`F=çéÉê~íáåÖ=çåÉ=çê=~=ÅçãÄáå~íáçå=çÑ=íÜÉ=ÑçääçïáåÖW=

clo=qeb=abpfdk=me^pbW=

^å=ÉäÉî~íçê=Åçãéäá~åí=ïáíÜ=b`=qóéÉ=bñ~ãáå~íáçå=`ÉêíáÑáÅ~íÉ=ki=NMJQMMJNMMOJMMOJQR=oÉîáëáçå=kçK=Q=fëëìÉÇ=Äó= iáÑíáåëíáíììí=ÄKîKI=^ãëíÉêÇ~ã=EMQMMF================= = = = = =======================

clo=qeb=fkpq^ii^qflk=^ka=qbpqfkd=me^pbW=

`çãéäá~åÅÉ= ïáíÜ= mêçÇìÅíáçå=nì~äáíó=^ëëìê~åÅÉI= pÅÜÉÇìäÉ=NP=E^ååÉñ=ufsF= EïáíÜáå= çìê= ^ååÉñ= ufff= `ÉêíáÑáÅ~íÉF= fëëìÉÇ=ÄóW=kçíáÑáÉÇ=_çÇó==_ìêÉ~ì=sÉêáí~ë=EMMQNF============= ?m~êâä~åÇë?I=táãëäçï=oç~ÇI=aáÇëÄìêóI=j~åÅÜÉëíÉêI=jOM=Oob= abpfdk=fp=_^pba=lk=qeb=cliiltfkd=e^ojlkfpba=pq^ka^oapW= _p=bk=UNJNWNVVU=H=^PWOMMV=p~ÑÉíó=êìäÉë=Ñçê=íÜÉ=ÅçåëíêìÅíáçå=~åÇ=áåëí~ää~íáçå=çÑ=äáÑíë=Ó=m~êí=NW=bäÉÅíêáÅ=iáÑíëK= ^ÅÅÉëëáÄáäáíó=çÑ=íÜÉ=aáë~ÄäÉÇW=`çãéäá~åÅÉ=ïáíÜ=_p=bk=UNJTM=W=OMMP= léÉê~íáçå=áå=Å~ëÉ=çÑ=cáêÉW=`çãéäá~åÅÉ=ïáíÜ=_p=bk=UNJTP=W=OMMR= s~åÇ~ä=oÉëáëí~åÅÉW=kçí=~ééäáÅ~ÄäÉK= _p=bk=UNJOUWOMMPW=oÉãçíÉ=~ä~êã=çå=é~ëëÉåÖÉê=~åÇ=ÖççÇë=é~ëëÉåÖÉê=äáÑíëK= _p=bk=NPMNRWOMMN=j~áåíÉå~åÅÉ=Ñçê=äáÑíë=~åÇ=ÉëÅ~ä~íçêë=Ó=oìäÉë=Ñçê=j~áåíÉå~åÅÉ=áåëíêìÅíáçåëK= cáêÉ=êÉëáëí~åÅÉ=çÑ=ä~åÇáåÖ=ÇççêëW=`çãéäá~åÅÉ=ïáíÜ=_p=bk=UNJRU=W=OMMP=

qÜÉ= bäÉÅíêçã~ÖåÉíáÅ= `çãé~íáÄáäáíó= oÉÖìä~íáçåë= OMMS= EpKfK= OMMS= kìãÄÉê= PQNU= ÄÉáåÖ= íÜÉ= rh= íê~åëéçëáíáçå=çÑ=bj`=aáêÉÅíáîÉ=OMMQLNMULb`F=Äó=íÜÉ=ÑçääçïáåÖW= `çãéäá~åÅÉ=ïáíÜ=íÜÉ=e~êãçåáòÉÇ=pí~åÇ~êÇ=_p=bk=NOMNRWOMNQ=bäÉÅíêçã~ÖåÉíáÅ=Åçãé~íáÄáäáíóK==mêçÇìÅí=Ñ~ãáäó= ëí~åÇ~êÇ=Ñçê=äáÑíëI=ÉëÅ~ä~íçêë=~åÇ=ãçîáåÖ=ï~äâëK==bãáëëáçåK= `çãéäá~åÅÉ=ïáíÜ=íÜÉ=e~êãçåáòÉÇ=pí~åÇ~êÇ=_p=bk=NOMNSWOMNP=bäÉÅíêçã~ÖåÉíáÅ=Åçãé~íáÄáäáíóK==mêçÇìÅí=Ñ~ãáäó= ëí~åÇ~êÇ=Ñçê=äáÑíëI=ÉëÅ~ä~íçêë=~åÇ=ãçîáåÖ=ï~äâëK==fããìåáíó= bäÉî~íçê=qóéÉW= jçåçpé~ÅÉ=qê~Åíáçå=J=m~ëëÉåÖÉê=L=dççÇë= mä~ÅÉ=çÑ=páÖåáåÖ= = a~íÉ= = k~ãÉ=çÑ=êÉëéçåëáÄäÉ= éÉêëçå= = páÖå~íìêÉ= = kçíÉW=^=éÜçíçÅçéó=çÑ=íÜÉ=ëáÖåÉÇ=ÇÉÅä~ê~íáçå=ãìëí=ÄÉ=ëÉåí=íç=fåëí~ää~íáçå=aÉé~êíãÉåíI=`ÜÉêíëÉóK

K

(9)

lïåÉêÛë=açÅìãÉåí~íáçå=

_~ëáÅ=açÅìãÉåí~íáçå

= = = = = «=OMNR=hlkb=éäÅ= = ^ää=êáÖÜíë=êÉëÉêîÉÇ= P=E=NN=F=

NKOK=

aÉí~áäÉÇ=péÉÅáÑáÅ~íáçå=

NKOKN=

_~ëáÅ=`Ü~ê~ÅíÉêáëíáÅë=Ñçê=bäÉî~íçê=kìãÄÉê=W=QONQRPTT=

qóéÉ=çÑ=bäÉî~íçê=WJ= hlkb=jçåçpé~ÅÉ∆_=TMM= o~íÉÇ=iç~Ç=WJ= NMMMâÖ= kìãÄÉê=çÑ=éÉêëçåë=WJ= NP= kìãÄÉê=çÑ=iÉîÉäë=ëÉêîÉÇ=WJ= NM= qê~îÉä=WJ= PSKVNM=ãÉíêÉë= o~íÉÇ=péÉÉÇ=WJ= OKM=ãLë= o~íÉÇ=pí~êíë=éÉê=eçìê=WJ= NUM= aêáîÉ=WJ= hajQM= `çåíêçääÉê=léíáçåë=WJ= cfaI=mo`= aççê=póëíÉã=WJ= ^ja=N=J=O=é~åÉä=ÅÉåíêÉ=çéÉåáåÖ= aççê=léÉê~íçê=WJ= hlkb=^ja= mìëÜÉë=WJ= hlkb=hpp= fåÇáÅ~íçêë=WJ= hlkb=hpp= `çåíêçä=póëíÉã=WJ= hlkb=i`b= hlkb=aÉëíáå~íáçå=`çåíêçä=póëíÉã= `~ê=qçé=`çåíêçä=WJ= hlkb= p~ÑÉíó=dÉ~ê=WJ= hlkb=pd_=MN= lîÉêëéÉÉÇ=dçîÉêåçê=WJ= hlkb=li=PR= _ìÑÑÉê=WJ= l_=OM=láä= j~ÅÜáåÉ=WJ= ju=NM= ^ëÅÉåÇáåÖ=`~ê=lîÉêëéÉÉÇ=éêçíÉÅíáçå=WJ= ju=NM=j~ÅÜáåÉ=Äê~âÉ= `çããìåáÅ~íáçåë=L=fåíÉêÅçã=WJ= hoj=J=hlkb=oÉãçíÉ=jçåáíçêáåÖ=_{hlkb=bJiáåâ=bäÉî~íçê=j~å~ÖÉãÉåí=póëíÉã=} cáêÉ=o~íáåÖ=WJ= O=Üçìêë= líÜÉê=WJ= kL^=============================== mçïÉê=oÉèìáêÉãÉåíë=L=sçäí~ÖÉë=WJ= QMMsI=RMeò=qÜêÉÉ=mÜ~ëÉ=C=kÉìíê~äI=OPMs==ëáåÖäÉ=éÜ~ëÉ= =

(10)

Owner’s Documentation

Basic Documentation

1.2.2 Layout Characteristics

Description of the Elevator

The Monospace®

elevator is a machine room - less concept. The machine is installed in the headroom of the well.

The control cabinet is installed in the lift shaft with a Maintenance Access Panel (MAP) situated near the topmost landing door, on the machinery side.

The suspension is of the underslung type with a reeving factor 2: 1. The machine as well as the rope fixing brackets are mounted on the guide rails.

The main characteristics of the lay-out are shown below.

Lift Car

Fixing point

Car side

Fixing point

Counterweight side

Counterweight

MX

Machine

(11)

Owner’s Documentation

Basic Documentation

1.3 Log Book

The logbook shall be safely kept and maintained by the owner as long as the elevator is in existence.

BASIC INFORMATION OF ELEVATOR INSTALLATION

Installation No:

Contract No:

Hand over date:

Site address:

The Elevator was first put into service on:

Name of company performing maintenance:

Start date of the maintenance contract:

The log must be kept up-to-date in the case of:-

1. Important modifications to the Elevator (Annex E, EN81-1); 2. Replacement Ropes or important parts;

3. Accidents ;

You must carry out examinations and tests after important modifications or after an accident to ascertain that your elevator continues to conform to standard. You must carry out these examinations and tests in accordance with EN 81-1 Annex E.

The Owner of the installation must ensure that the risk assessment for maintenance is

updated :-

1. If the maintenance organisation is replaced;

2. If the use of the building and/or the installation changes; 3. After a major modification of the installation or of the building; 4. After an accident involving the installation.

(12)

Owner’s Documentation

Basic Documentation

LOG BOOK

Page 1

Event

1, 2 or

3 Date Name of

person and

Company

carrying out

the works

Brief description of Event. (Modifications,

replacement parts, ropes etc, accidents). If further

information is filed please reference to the Log entry

and file at the rear of Section one.

(13)

Owner’s Documentation

Basic Documentation

LOG BOOK

Page 2

Event

1, 2 or

3 Date Name of

person and

Company

carrying out

the works

Brief description of Event. (Modifications,

replacement parts, ropes etc, accidents). If further

information is filed please reference to the Log entry

and file at the rear of Section one.

(14)

Owner’s Documentation

Basic Documentation

LOG BOOK

Page 3

Event

1, 2 or

3 Date Name of

person and

Company

carrying out

the works

Brief description of Event. (Modifications,

replacement parts, ropes etc, accidents). If further

information is filed please reference to the Log entry

and file at the rear of Section one.

(15)

Owner’s Documentation

Basic Documentation

LOG BOOK

Page 4

Event

1, 2 or

3 Date Name of

person and

Company

carrying out

the works

Brief description of Event. (Modifications,

replacement parts, ropes etc, accidents). If further

information is filed please reference to the Log entry

and file at the rear of Section one.

(16)

Owner’s Documentation

Basic Documentation

LOG BOOK

Page

Event

1, 2 or

3 Date Name of

person and

Company

carrying out

the works

Brief description of Event. (Modifications,

replacement parts, ropes etc, accidents). If further

information is filed please reference to the Log entry

and file at the rear of Section one.

(17)

Owner’s Documentation

Basic Documentation

1.4 Copies Of Examinations, Inspection Reports,

Observations Etc.

This section in accordance with

BS EN 81-1:1998 Safety rules for

the construction and installation

of lifts – Part 1: Electric Lifts.

Clause 16.2.b,

is intended to keep duplicate

copies of examinations,

inspection reports, observations

etc.

(18)

Owner’s Documentation

Technical Documentation

2. TECHNICAL DOCUMENTATION

2.1 Plans of the Elevator in the Building ... 2

2.1.1 Description ... 2

2.2 Electric Schematic Diagrams ... 15

2.3 Basic Characteristics of Safety Components ... 80

2.4 Basic Characteristics for Ropes ... 81

2.4.1 Suspension Rope ... 81

2.4.2 Overspeed Governor Rope ... 81

(19)

Owner’s Documentation

Technical Documentation

2.1 Plans of the Elevator in the Building

2.1.1 Description

KONE’s MonoSpace®

elevator does not require a machine room; it is machine-room-less and is completely installed inside the shaft. The main compulsory characteristics are :-

• The machinery electric drive and controller are placed inside the headroom of the shaft;

• A Maintenance access Panel (MAP), containing switches for remote control, is positioned on the topmost (or, occasionally, topmost –1) landing.

KONE MonoSpace®

elevators are completely supported by their own guide rails. For this reason, the only interface between the elevator and the building are: doors, pit equipment, guide rail brackets, machinery, and rope fixings. All other accessories are fixed to the guide rails.

The guide rails are placed in the shaft following a "counterweight-on-the-side" scheme. The machinery and the counterweight itself are located on the same side of the shaft. Which side they are placed depends on whether the elevator is left-handed or right-handed (This is defined as viewed from the landing door with the Maintenance Access Panel on the topmost floor).

Due to this "counterweight-on-the-side" scheme, the guide rail fixings are of three different types: one combined bracket on the machinery side that fixes one car and one counterweight guide rail; one bracket that fixes the opposite counterweight guide rail (again on the machinery side); and one bracket on the non-traction side that fixes only the car guide rail.

(20)

(21)

(22)

(23)

(24)

(25)

(26)

(27)

(28)

(29)

(30)

(31)

(32)

Owner’s Documentation

Technical Documentation

(33)

KONE

Equipment

number:

42145377-79

3

5

0

4

5

8

1

4 -1

6 -

Customer:

KOU

Sales order

number:

_*350045814*

Part number:

*KM750172G01*

Designed by Issue Date Change description

RAGESH.E.G - 20.05.2015

Number Issue Page Title

864841E00 - 1 Position number table

350045814E01 1 1 Power Supply

1374505E01 A 1 Machinery, Controller and MAP

864842E01 B 1 KGC - LON ADAPTERS - CONTROL PANEL

350045814E01 - 4 MACHINE ROOM NETWORK

350045814E01 - 5 MACHINE ROOM NETWORK

350045814E02 - 1 Calls and Signals

811850E02 D 2 Safety chain

811850E02 D 3 Safety chain and lighting

50301204E02 - 1 KDCDOP

1356800E02 - 1 DCS electrification

350045814E02 - 6 SHAFT NETWORK ARRANGEMENT

350045814E02 - 7 Calls and signals

350045814E03 - 1 Car roof, AMD_D2

1356801E03 - 1 Car COP

350045814E03 - 3 Travelling cable I

1374506E04 A 1 Drive module

350045814E04 - 2 Drive module

811852E05 D 1 Safety chain

350045814E06 - 1 Optional PC-board wiring

350045814E06 - 2 DCS Group connections

861393E07 - 1 Control module

1356801E08 - 1 Signals in car, COP

1356802E08 - 2 Signals in car, COP

864841E09 - 1 Car calls

350045814E10 - 1 Landing calls and signals 350045814E10 - 2 Landing calls and signals 50301204E10 - 1 Landing Calls and Signals

(34)

Number Issue Page Title

350045814E10 - 4 Landing Calls and Signals 350045814E10 - 5 Landing Calls and Signals

861397E10 - 1 Landing Calls and Signals (ONLY FOR ORDER:350045816)

856476E11 A 1 AMD DRIVE2 A-side

713310E14 C 1 ADO/ACL-circuit

350045814E15 - 1 LCEOPT/FRD/FID/EPD/OSS/WSC/DCL/OSI/DAL

811853E15 - 1 Additional devices EPS

350045814E15 - 3 EN81-28

350045814E15 - 4 EN81-28

350045814E15 - 5 EN81-28

885520E18 - 1 Lift announcer ACU, LON interface

1374526E23 B 1 Lighting and alarm

880331E23 C 1 Lighting and alarm (ONLY FOR ORDER:350045816)

812301E24 C 1 KRM/Car

812301E24 C 2 KRM/Controller

781712E25 - 1 Maintenance intercom ISM

812305E26 A 1 FRD / FID

861951E26 C 1 FRD EN(ONLY FOR ORDER:350045816)

350045814E28 - 1 Connection of ELINK cables

350045814E60 - 1 Floor table

861393E60 C 1 Shaft vane diagram

350045814E90 - 1 Layout for MAP

350045814E90 - 2 Layout for switches and options module

350045814E90 - 3 Layout for top module

350045814E90 - 4 Layout for SEP

1374514E91 - 1 Layout for top module

350045814E90 - 6 LAyout for options module

771664 C 1 MCD/DELTA Electrification

ELEVATOR PARAMETERS:

Number Description Value

ELEVATOR CONFIGURATION:

Option Description

ACL Accurate Levelling

ACU Elevator announcer

ADO Advance door opening

AMD_D2 AMD Drive 2 doors

BFS Buffer switch

C_PROCESS C-Process elevator

CPU561 CPU 5.6.1

DAL_GP Disturbance alarm, general, potential free contact DAL_GP Disturbance alarm, general, potential free contact

(35)

Option Description

ELF Extra long floor

ELINK E-Link

EMH_T Emergency stop in pit

EN81_73 No entry light for EN81-73 EPD Operation stand-by + recovery

EPS Emergency power sequencer

FID Fire detection

FID_B Fire detection, whole building FID_B Fire detection, whole building

GB United Kingdom

ISM Maintenance intercom

KDM KDM Drive

KQT_E KQT Extension

KRM KRM system

KSS KSS COP

LCEOPT_POS1 Options provided by LCEOPT Pos.1 card (Hex 0 F) LCEOPT_POS1 Options provided by LCEOPT Pos.1 card (Hex 0 F) LCEOPT_POS1 Options provided by LCEOPT Pos.1 card (Hex 0 F)

LCERAL Remote alarm

MCD MCD car

MSW4S MSW4S distribution system

MX10 MX10 Machinery

NOCAB NoCabinet elevator

OPTIONS Options

ROPING_2_1 Roping 2:1

SEGMENTED_SHAFT Segmented shaft power supply

SHL Shaft lighting

SL_BRAKE Silent Brake

TOPMOST_1 MAP at topmost -1

TRIPLEX Triplex

COP2 Number of COP

MSWREV Main switch with reversed connection

SECOND_COP 2nd COP

(36)

HAT LCE

T.Hietala en

POSITION NUMBER TABLE

864841E00

-A4

Change description Date Des. by Appr. by Issue

H

Designed by Checked by Language Dept. Date Approved by Product code

Issue Page G F E D C

1/3

B A

Sales ref. no. Drawing no.

-SERVICE DRIVE LIMIT SWITCH

68:U

ENCODER 6:3

FIRE INDICATION IN MACHINE ROOM 18 SEISMIC DEVICE 25 FAN 10 BRAKE SOLENOID 11

SLACK ROPE CONTACT 13

THERMAL CONTACT 10:T

STOP SWITCH IN MACHINERY 14

MAIN SWITCH UNIT 20

OVERSPEED GOVERNOR CONTACT 22

HAND WHEEL CONTACT 28

DOOR ZONE SWITCH CAR CALL BUTTONS I/O-BOARD COPMUL EXPANSION BOARD LCEFCB 30

31 32 32:EXT

OVERSPEED GOVERNOR CONTACT FOR COUNTERWEIGHT 26 HOISTING MOTOR THERMISTORS RESOLVER 1 1:T 6:1 TRANSFORMER 7

LOAD WEIGHING DEVICE 64 SERVICE LIGHT 42:SL ATTENDANT SWITCH 33 ATTENDANT DOWN 33:N ATTENDANT BY-PASS 33:B LOCKING SWITCH 38 ATTENDANT UP 33:U

DOOR OPEN BUTTON DOOR CLOSE BUTTON DOOR EXTENSION TIME PRIORITY DRIVE SWITCH SWITCH FOR CAR LIGHTING SWITCH FOR CAR FAN 34 34:S 34:E 35 36 37 ALARM BUTTON

STOP SWITCH ON CAR ROOF SWITCH FOR INSPECTION DRIVE INSPECTION BUTTON "UP" INSPECTION BUTTON "DOWN" INSPECTION BUTTON "RUN" 39 41 42:DS 42:U 42:N 42:RB

ALARM BUZZER ON CAR ROOF OUT OF SERVICE SWITCH 65

66

CAR POSITION SENSOR CAR POSITION SENSOR B-SIDE LADDER CONTACT 61 B61 63 CAR ENCODER 60

EMERGENCY EXIT CONTACT 57

CAR FAN CAR LIGHTING EMERGENCY LIGHTING SOCKET ON CAR ROOF FINAL LIMIT SWITCH IN CAR SAFETY GEAR CONTACT 43 44 44:1-2 45 51 52 FIREMAN’S SWITCH

DECELERATION SWITCH "UP" DECELERATION SWITCH "DOWN" 71

77:U 77:N

COPYRIGHT (C) 2006 KONE CORPORATION

30.05.2006 PCM/Ari Jokivalli

(37)

HAT LCE

T.Hietala en

POSITION NUMBER TABLE

864841E00

-A4

H

2/3

B A

-CAR DOOR CONTACT

87

DOOR MOTOR 85

DOOR OPERATOR 84

SAFETY EDGE CONTACT 82

CAR DISPLAY 96

NEXT STOP INDICATOR 96:EXT

DESTINATION INDICATOR 96:EXT

DESTINATION OPERATING PANEL 101

CARD READER 108

SHAFT LIGHTING SOCKET IN SHAFT PIT OUT OF SERVICE LIGHT

CAR POS. INDICATOR AT FLOORS 166 176 DESTINATION INDICATOR 176:1-n PB,DC CALL BUTTONS 102 ELEVATOR IDENTIFIER 177:1-T IN USE LIGHT FEB CALL BUTTONS 105

OTB NORMAL/BYPASS SWITCH 118:E

OTB BYPASS SWITCH 118:B

FPO/SGO 119

CONCEALED DOOR CONTACT 120

TENSION WEIGHT CONTACT 124

SHAFT DOOR CONTACT SHAFT DOOR LOCK CONTACT TENSION WEIGHT CONTACT 121 ATTENDANT UP 93:U ATTENDANT DOWN 93:N PHOTOCELL DEVICE 90

DOOR PHOTOCELL, RECEIVER 89

DOOR PHOTOCELL, TRANSMITTER 88

122 123

SAFETY GEAR CONTACT FOR COUNTERWEIGHT 126

OVERSPEED GOVERNOR CONTACT FIREMAN’S SWITCH

127 133

BUFFER CONTACT 125:1-2

EMERGENCY STOPPING SWITCH 136:UnA/B

BUTTON FOR SHAFT LIGHT 137

EMERGENCY STOPPING SWITCH 136:NnA/B

OUT OF SERVICE SWITCH 116 PRL-L CALL SWITCH 115 LOCKING SWITCH 117 113 STOP BUTTON 112

PRL-H/HEL CALL SWITCH

LOUDSPEAKER FOR ELEVATOR SPEECH UNIT 98 SWITCH OVERLOAD INDICATION 99 157 INTERCOM DEVICE 100

ALARM RECEIVED LIGHT 97

158 161

FET CALL BUTTONS 106

UP CALL BUTTONS 104

DOWN CALL BUTTONS 103

FINAL LIMIT SWITCH DOWN 151:N

FINAL LIMIT SWITCH UP 151:U

DERAILMENT CONTACT 190

FIRE DETECTION AT LANDINGS 193

FLOOR BOARD LCEFCB 197

FLOOR BOARD LCEFOB 198

COPYRIGHT (C) 2006 KONE CORPORATION

(38)

HAT LCE

T.Hietala en

POSITION NUMBER TABLE

864841E00

-A4

H

3/3

B A

-CONTROL CURRENT TRANSFORMER

239

BRAKE CONTACTOR 209

STOP BUTTON EMERGENCY BATTERY

POWER SUPPLY UNIT 267

227

251

REMOTE ALARM BOARD LCERAL 228

AUXILIARY MAIN CONTACTOR 201

SHAFT LIGHTING 268

THERMAL CONTACT

SWITCH FOR RECALL DRIVE RECALL DRIVE BUTTON "UP" RECALL DRIVE BUTTON "DOWN" RECALL DRIVE BUTTON "RUN" 273

270 270:U 270:N 270:RB

DOOR ZONE INDICATION

KDH DRIVE PANEL

279 PC-BOARD 370:1 LCEAMAX 370:2 BRAKING RESISTOR 306

I/O CONNECTION BOX 367

LCEHKM

PC-BOARD

BRAKE CONTROL UNIT 388:1-2

DCBH MODULE, POWER BOARD 385:A8 DCBH MODULE, KDNTS BOARD 385:A7 SWITCH MODULE 372 RESISTOR MODULE 391

ELEVATOR SPEECH UNIT 766 RFI FILTER -Z1 FUSE MONITOR -A101 CONTACTOR -K2 MAIN CONTACTOR -K1 TRANSFORMER -T10 RECTIFIER -G1 INVERTER UNIT -U2 CHOKE -Z2

LINE FILTER UNIT -L1

CONVERTER UNIT -U1

CONTACTOR -K101

DRIVE CONTROL UNIT

DDCS COMMUNICATION OPTION MODULE DRIVE CONTROL UNIT

=01-A1 =11-A1

DDCS COMMUNICATION OPTION MODULE =01-A2

RESOLVER INTERFACE -A10

MOTOR ENCODER INTERFACE -A9

=11-A2

DISCHARGING BOARD -P1

CPU-BOARD LCECPU

SAFETY CIRCUIT BOARD LCEADO DCBH MODULE, CPU BOARD 375

379 385:A1

SPEED SUPERVISORY BOARD LCEETSL 728:1-n

POWER SUPPLY UNIT DOOR ZONE CONTACTOR SUPERVISORY CONTACTOR ACCURATE LEVELLING RELAY SPEED MEASUREMENT CONTACTOR 806:REC2

K443 K486 K487 K553

POWER SUPPLY UNIT 806:REC1

CAR CONTROLLER BOARD LCECCBN2 806

EXPANSION BOARD LCEOPT POWER SUPPLY BOARD POWER MODULE 390

722 723

GATEWAY BOARD LCEGTW CAN-BOARD LCECAN 731

732

COPYRIGHT (C) 2006 KONE CORPORATION

(39)

A4

H G F E D C B A Title Designed by Checked by Page Sales ref. no.

Language Dept. Date Approved by Comp. fam. codes

Issue Appr. by Des. by Date Drawing no. Change description Issue

KONE Corporation

Copyright C 2011 KONE Corporation

ELECTRIFICATION

POWER SUPPLY

RAGESH.E.G

K.MOHAN

en

HCE

19.05.2015 NAVANEETHAN.T

LCE

-

1 350045814E01

1*16A +10%/-15% 230VAC PE 50-60Hz 1343770G*

POWER SUPPLY TO

GROUP CONTROL

COMPUTER

SEE PAGE -E28 G2 L2 N 1*16A

DELIVERY LIMIT

+10%/-15% 220 T1 T2 T3 230VAC PE 50-60Hz 1343770G*

POWER SUPPLY TO

GROUP CONTROL

COMPUTER

L1 262 2 1 SEE PAGE -E28 D2 L1 4 3 L2 L3 PEN

MAP/

L1 L2 L3 N +10%/-15% MAINS 400V 50-60Hz L PE

TN-C

(MSW 4S)

220 N T1 T2 T3 L1 262 2 1 4 3 L2 L3 PE +10%/-15% LIGHTING 1*16A/230V 50-60Hz

CONTROL PANEL ASSEMBLY

MAP/

L1 L2 L3 N +10%/-15% MAINS 400V 50-60Hz

CONTROL PANEL ASSEMBLY

BMV_MU BMV_MU BMV_MU 983937G** SHAFT

₃₈₆

BMV_MU

X1/1 X1/2 X1/3 F386:1 XECO2/1 983633G** XECO2/2 386:2 X2/1 X2/2 FILTER MODULE

385:A1

MACHINE ROOM -MAP PE mm2 MAINS

TN-S

2nd

(MSW 5)

= WHEN <10mm2 MAINS MAINS

MAP

DRIVE

PE MAINS mm2 PE + PE

(40)

262/2 8 262/4 PE MAP 2 1 XM25 1 775876G0* 781681G* 804639G0* 9 220:(T1) 220:(T2) 220:(T3) 10 3 X1

SEP

1 X5 XLH9 1 XL1 1 2 4 3 5 7 6 9 8 10 11 . XM5 1 2 XM7 X3 1 2 LCECPU XL5 XL8 1 2 3 4 1374458G* 3 . OSG XD1 LCEADO 1 LCE230/ 2 H157 XL1 3 TO SHAFT LIGHTING 1 2 3 4 5 1 XM17 3 12 13 XM16 2 1 2 1 XLH6 1 . 3 290:1/2 270 XL6 1 2 1 3 10 XL2 SEE E04 POWER MODULE 239 XLH3 1₃ XLH8 1 3 2 XLH2 1 2 4 5 270 379:1 270:RB N2 7 XLH5 1 3 5 7 PE 1 127:1 9 XH2 XM3 375 3 5 379 7 1 2 3 4 3 4 5 1374475G* 780292G02 274/L 14 1374477G* LOPCB LOP230 1 2 3 L1 1374476G* 220:1 4 11 L2 L3 1 12 13 14 5 6 7 2 X3 X2 1 Bn XLH1 ₄ 5 375:1 L1 L2 L3 L1 1 XM4 3 1374471G* 2 LWD Bk SEE PAGE *E01-1/2 FOR SUPPLY CONNECTIONS 1374472G* XM14 X4 983383G0*

A4

KONE Corporation

Copyright C 2011 KONE Corporation

ELECTRIFICATION

2 MACHINERY, CONTROLLER AND MAP

/

E.Riikonen / Jomine

J.Kantola

en

HAT

2011-09-07

J.Helvilä

LCE

-

2 1374505E01

L3 L3 L2 1 XM25 1 2 XM16 1 2 3 4 L2 290:3 723 LCEREC FUSE MODULE L2 L1 L2 F10/2 F10/4 3 1 XM5 1 2 4 5 1 XM17 1 2 V 1:T XT1 1 PE XBAT1 1 2 6:3 XLG1 2 1 987085G* XEIN1 2 MACHINERY 959935G0* 377 DCBG MX10/20 775877G0* 1 2 4 XW1 1 2 6 10:T XFB5 10:1-2 XBR2 XBR1 4 1 3 11:2 11:1 PREWIRED 923942G0* 923992G0* XLD5 2 50032188* 1 3 2 XD1 PE K201/1 1 3 K201/3 2 2 3 MODULE 395 KDA 923941G0* 3 1 4 3 5 W XMEN5 6 PE 385 DRIVE MODULE U K201/5 L1 2 3 1 4 K201/2 K201/4 K201/6 5 6 L2 XMEN1 L3 1 X6 1 2 1 X7 1 2 1:T 923943G0* MX14 1 4 220:(L1) 220:(L2) 220:(L3) SENSOR Gn 140 Ye Wh XL4 1 2 3 4 5 Bn Gn Ye Wh Bk

B

A LWI added 15/2012 JKa

763656G1* 3 1 2 3 2 1 XW 2 XB50 1 21 3 3 LWI LWD SENSOR CAR Gn Ye Wh LWI -LWI -LWI 2 3 1 4 1 XD5 1 2 3 4 7 6 4 5 6 5 XRS1 6 XAP1 SEE PAGE *E01-1/1

B Added LOPCB reference to page 1 2.4.2015 ettessa

SEE PAGE *E01-1/1

(41)

A4

H

Designer Checker

Page Language Dept. Date Approver Product c.

Issue

Change Date Des Appr

Issue G F E D C B A COM1

Sales ref. no. Draw. no.

1/1

en LCE T.Hietala

-

864842E01

B

PE EIA-232 2 N HAT

KGC - LON ADAPTERS - CONTROL PANEL

A Commomn Memory Network corrected 19.01.2007OP.Lignell

L PE 2 3 KM860523C01 3 E28 PE 5 EIA-232 L N L 2 COM1 N 5 COM2 2 PE 3 5 2 PE EIA-232 2 X1A 2 LON ADAPTERS 732:2 1 1 X2 2 1 KGC:1 UPS:1 X2 X1A 1 X1B 2 2 3 KM713256G07 L2 N2 5 N KM860506G*/C01 L PE 2 3 KM860523C01 KM860508G*/C01 KM713256G07

KGC CABINET

KM1346008G02

KM50026999 KM837059C01 1 X1B 2 1 E28 KM837059C02 E28 KM860519C01 E28 732:1 KM860536C02 E28 3 E28 PE

ELECTRIFICATION

5 EIA-232 L N L 2 N 5 COM2 2 PE 3 5 2 2 X1A 2 LON ADAPTERS 732:2 1 1 X2 2 1 KGC:2 UPS:2 X2 X1A 1 X1B 2 3 1 L2 N2 5 2 XG1:2 1 KM837059C01 1 X1B 2 1 E28 KM837059C02 E28 4 KM837879G01 3 2 XG1:1 732:1 E06 E06 KM860536C01 E28 2 1 XG5 4 3 2 1 XG5 120 Ohm./0.5W 120 Ohm./0.5W KM837879G01 LCEGTWO LCECPU561 731:1 SEE NEXT PAGES

731:2 1 2 XG4A LCEGTWO KM1343770G02 KM1343770G02 230VAC 50-60Hz 230VAC 50-60Hz 731:2 3 4 XG1B 3 4 XG1B 1 2 _XG4A 731:1 731:2 375 LCEGTWO 731:1 LCEGTWO 375 LCECPU561 LCEGTWO LCEGTWO 731:1 LCEGTWO 375 LCECPU561 LCECPU561 731:2 LCEGTWO 375 LCECPU561 731:1 LCEGTWO 731:2 LCEGTWO 375 CONTROL PANEL CONTROL PANEL CONTROL PANEL CONTROL PANEL CONTROL PANEL KM837879G01

COPYRIGHT (C) 2006 KONE CORPORATION

PCM/Mauno Manninen GROUP CONTROL COMPUTER

GROUP CONTROL COMPUTER

ACCESS SELECTION RJ45 RJ45

KGC CABINET

KM1346008G01

KM837879G01 KM50026999

(42)

RAGESH.E.G

K.MOHAN

19.05.2015 NAVANEETHAN.T

350045814E01

120 Ohm 0,5W

CONTROL PANEL

350045814

1 2

375 LCECPU561

1 2

XG4A

1 2

XG4B

KCG:1/X1A 713256G0*/C02 120 Ohm 0,5W

350045816

350045815

CONTROL PANEL

KCG:1/X1B 1 2

375 LCECPU561

713256G0*/C02

375 LCECPU561

1 2

XG4A

1 2 1 2

XG4A

1 2

XG4B

713256G0*/C01 1 2 1 2

XG4B

Designer Checker Page Language

A4

MACHINE ROOM

ELECTRIFICATION

Issue

Dept. Date Approver Product c.

Issue H G F E D C B A

4

en LCE

-

-HCE

NETWORK

COPYRIGHT (C) 2006 KONE CORPORATION

NETWORK 1

(43)

RAGESH.E.G

K.MOHAN

19.05.2015 NAVANEETHAN.T

350045814E01

A4

MACHINE ROOM

ELECTRIFICATION

NETWORK

Issue

Dept. Date Approver Product c.

Issue H G F E D C B A

5

en LCE

-

-HCE

350045816

350045815

350045814

CONTROL PANEL

1 2 860508G0*/C01

LCEGTWO

731:1

LCEGTWO

731:2

LCEGTWO

731:1

LCEGTWO

731:2

1 2

XG1A

806500G0*/C01 806500G0*/C01

XG1A

XG1B

LCEGTWO

731:1

1 2 2 1 2 3 4 1 2 +24V 0/24V 1 2 3 4 1 2

XG1A

806500G0*/C01 806500G0*/C01

XG1A

XG1B

LCEGTWO

731:2

2 3 1 2 3 4 1 2 +24V 0/24V 1 2 3 4 1 2 3 4 1 2 +24V 0/24V 1 2 3 4 1 2 3 4 +24V 0/24V 1 2 3 4 1 2 KGC 3 KGC 2 3 1 1 BR2 BR1 2 3 1 1 BR1 BR2 2 3 1-2 R=120ohm ON 2-3 R=120ohm OFF 2 3 1-2 R=120ohm ON 2-3 R=120ohm OFF 1 2 3 2 2 3 2 3 1 1 BR1 BR2 2 3 3 4 2 1 2 +24V 0/24V 1 2 3 4 1 2 3 4 +24V 0/24V 1 2 3 4 1 2 3 1 1 BR2 BR1 1-2 R=120ohm ON

2-3 R=120ohm OFF 1-2 R=120ohm ON2-3 R=120ohm OFF

2 3 1-2 R=120ohm ON (-KGC) 2-3 R=120ohm OFF (KGC) LON ADAPTER XG1:1 LON ADAPTER XG1:2 860506G0*/C01

COPYRIGHT (C) 2006 KONE CORPORATION

1 1 BR1 BR2 1 1 BR1 BR2 713256G0*/C01 1 2 120 Ohm 0,5W 1 2

XG3B

1 2

XG3A

1 2

XG3A

1 2

375 LCECPU561

120 Ohm 0,5W 713256G0*/C01 1 2

XG3B

1 2 1 2

XG3B

1 2

XG3A

1 2 KGC 1-2 R=120ohm ON (-KGC) 2-3 R=120ohm OFF (KGC) KGC

(44)

731 LCEGTWO MAP E10/1 SEP/ DOPMUL/ KDCMUL DOPMUL/ KDCMUL DOPMUL/ KDCMUL DOPMUL/ KDCMUL DOPMUL/ KDCMUL

A4

H Designer Checker XS1 Page Language Dept. Date Approver Product c.

Issue

Issue G F E D C B A

ELECTRIFICATION

1

en LCE

COPYRIGHT (C) 2006 KONE CORPORATION

-

-XS2

HCE XS2

SEGMENTED SHAFT NETWORK

CONTROL PANEL BK BN GNYE EZO KM283329 1

XH15

BK 2 WH 1 3 L BK BK LCEGTWO 2 251 3 713800G0* 197:T 806515G*/C01 WH BK WH LCEFCBG11 XS2 XS1 BU/GY BN KM273136 BK

X3

WH 198:T XS1 XS2 713800G0* -EZO 713863G01 120R 4 EZO 6 197:T-1 LCEFCBG11 BK GNYE BU/GY N PE L N XS2 XS1 198:T-1 PE TX+ TX-TE 1 2 +24V XS1 XS2 0/24V

X2

197:* LCEFCBG11 E10 XS2 XS1 -EZO XS2 XS1 198:* XS1 XS2 1 KM263918/KM283979 L LCEGTWO 2 251 3

X3

N PE L N PE TX+ TX-TE 1 2 +24V 0/24V

X2

XS1 XS2 713800G0* BK BN GNYE BU/GY BK WH BK WH 1 L LCEGTWO 2 251 3

X3

N PE L N PE TX+ TX-TE 1 2 +24V 0/24V

X2

197:* LCEFCBG11 XS2 XS1 198:* XS1 XS2 806515G*/C01 -EZO SUPPLY 835554G01 120R 197:1 LCEFCBG11 XS2 XS1 198:1 XS1 XS2 713800G0* 835629C01 835629C01 835629C01 1 2 3 4 5 6 L GNYE BU/GY 2x SUPPLY -2x BN SEE PAGE 251 -E23 1/1 N PE

RAGESH.E.G

K.MOHAN

19.05.2015 NAVANEETHAN.T

350045814E02

(45)

Sales ref. no. 122:T P122 PE 122:2-(T-1) P122 3 5

A4

Draw. no.

SHAFT ELECTRIFICATION

SAFETY CHAIN

en LCE J.Kantola Designer Checker Page Language 2 PE 3 5 2 122:1 P122 17.05.2002

COPYRIGHT (C) 2002 KONE CORPORATION

P110 XLH7

Issue Dept. Approver Product c. Date Issue

-

811850E02

3 5 2 H G F E D C B A

2/3

D

ECC A. Jokivalli P. Huotari 3 PE 1 PE 3 5 2 781661G** P122 PE 3 5 2 713806G01 713806G0* 713806G0* 713806G0* 713242G01 PE 1 3

MAP/

379:1 C

CONTROL PANEL

02/2/06 JKa

FRD EU rule added (page 3)

(46)

WSC P125:2 en 728762G0* P125:1 3 2

Issue

751279G0*

A4

3 2

4 Designer Checker Page Language Dept. Approver Product c. Date Issue - BFS 8 9 X5 722 LCEOPT 3 112 NOT INCLUDED 713865G0* SHAFT LIGHT 137 158 2 PE 1 2 3 - BFS 4 753557G01

SAFETY CHAIN AND LIGHTING

112:1 112:2 P112:1 2 -EMH T -EEC S

SHAFT ELECTRIFICATION

1 157 157 -OSG W LCE J.Kantola 17.05.2002

COPYRIGHT (C) 2002 KONE CORPORATION

-1

811850E02

P112:2 2 1

SEP

EMH T -EEC S D.2

CONTROL PANEL

Alternative top shaft light added

2 2 3 4 5 1 3 0.5m 1 3 5 H G F E D C B A

3/3

D

3 5 P123:1 P112:1 2 1 1 2 156 XLH4 4 5

MAP

379:1 LOP230 ECC A.Jokivalli P.Huotari Max. 11/2012 JKa D 6.0m 773313G0* H157 5/4/07 JKa P122 -> P110 on page 2 5 1 2 3 4 5 3 4 4 5 5 1 1 2 3 4 5 NOT INCLUDED 750267G* 750267G*

BOTTOM OF LIFT WELL

FRD EU +300mm PIT 125:1 123:1 125:2 WHEN ADDITIONAL DEVICES *E02 1/1 SEE OSG W / EEC S n*6.0m A) WHEN HALOGEN B) NOT HALOGEN 0.5m 750267G* 2 A) 777012G* 2 2 157 1 3 4 5 1 3 4 5

CEILING OF LIFT WELL A) 777011G*

B)

Max. 2 157 1 3 4 5 1 3 4 5 1.5-2.0m A) 6.0m B) 885592G* B) 750267G*

(47)

A4

H

Designer Checker

Issue

Issue G F E D C B A

ELECTRIFICATION

1/1

en LCE K.Sinisaari

-

50301204E02

-A.Parviainen ALTE M.Nevalainen

LANDING CALLS AND SIGNALS

WH

COPYRIGHT (C) 2013 KONE CORPORATION

2013-10-02 TOUCH SCREEN & CONTROLLER 1 2 YE

X11

LCD BACKLIGHT 1 2 3

X5

4 USE PROXIMITY SENSOR (GPIO) KEYPAD LOCAL LOUDSPEAKER +

-X12

1 2 50301208G01

X10

1 1 2 YE 3

X13

20 1356781G03 51026203G01 1 4 5 6 7 8 50301206G01 50301205G01

S1

1 2

X6

XS1

2 3 4 5 6 1 ₁ 3 b a 2 4 2 (835629C01 -LAN) 3 4 5 6 1 1 3 b a 2 4

XS2

2 3

XS2

2 3 4 5 6 1 ₁ 3 b a 2 4 4 5 6 1 1 3 b a 2 4

101:n DESTINATION OPERATING PANEL

KDCTSDOP 20 KDCDAB LOCKING LVDS INTERFACE

X4

KDCTSDOP

J1

RJ45 1 12 1 12 KDCKPD

X1

1 12 3 GND 24VDC 0/24V 0/24V RS485 B ROLL CALL RS485 A 0/24V RS485 B ROLL CALL RS485 A 10 0/24V 24VDC

XS2

2 3 4 5 6 1 ₁ 3 b a 2 4 RS485 B ROLL CALL RS485 A

LAN ETHERNET (CAT6)

X7

RS232 ACS INTERFACE

X2

2 3 4 5 6 1 RX TX RTS CTS RS485 ACS INTERFACE

X3

2 1 A B 50301209G01

X8:1

USB

X8

3 4 5 1 VBUS D+ D-GND RD GN WH BK DRAIN WH BN BN 3 1 2 4 5 I2C INTERFACE 1 2 3 4 4 5 YE 3 1 2 4 5 BK BK BK 1 2 3 4 5 6 7 8 51026226G01 12V_BKLED GND YE YE YE BK BK BK Vdd OUT 3 1 2 GND

S2

Locally 1 2 3 1 Vdd OUT 3 1 2 GND 2 3

(48)

A4

H

Designer Checker

Issue

Issue G F E D C B A

ELECTRIFICATION

1/1

en LCE K.Sinisaari

-

1356800E02

-SD Card LOCKING HCE

LANDING CALLS AND SIGNALS

. . . . Locally DESTINATION INDICATOR USE

XS1

2 3 4 5 6 1 ₁ 3 b a 2 4 2 835629C* 3 4 5 6 1 1 3 b a 2 4

XS2

2 3

XS2

1 2 3 4 5 2 6 1 ₁ 3 b a 2 4 4 5 6 1 1 3 b a 2 4

101:n DESTINATION OPERATING PANEL

KDCDOP

COPYRIGHT (C) 2011 KONE CORPORATION

29.07.2011 J.Åberg J.Åberg KDCDOP XMM3 1 LOCAL 7 8 9 10 11 12 1356781G* 12 4 5 1 1 2 KDCMUL KEYPAD

J9

LOUDSPEAKER + 5 6 1 2

J7

3 4 2 3 4 5 6 7 8 9 - 0 * 7 8 9 10

-J1

2 1 2 3 11 10 11 12 5 3 4 3 4 3 4 1356783G* 3 4 6 1 2

J2

3 4 9 8 7 6 12 4 5 3 11 10 9 8 7 6 7 8 9 10 11 12 772817G01 12 4 5 1 5 6 1 2

J5

3 4 7 8 9 10 2 1 2 3 11 10 11 12 5 6 1 2

J1

3 4 9 8 7 6 12 4 5 3 11 10 9 8 7 6

(49)

LCEGTWO S1 DOPMUL:2 DOPMUL:4 LCEGTWO S1 LCEFCBG11

RAGESH.E.G

K.MOHAN

19.05.2015 NAVANEETHAN.T

350045814E02

HCE

A4

H Designer Checker Page Language Dept. Date Approver Product c.

Issue

Issue G F E D C B A

ELECTRIFICATION

6

en LCE

-

-=

SHAFT NETWORK ARRANGEMENT

BOARD

DOPMUL: DOPMUL:

LCEGTWO S2 LCEFCBG14 LCEFCBG15 DOPMUL: LCEGTWO S2 LCEFCBG14 LCEFCBG15 DOPMUL: DOPMUL: DOPMUL: LCEGTWO S2 LCEFCBG14 LCEFCBG15 DOPMUL: DOPMUL: DOPMUL: LCEGTWO S2 LCEFCBG14 LCEFCBG15 DOPMUL: DOPMUL: DOPMUL: LCEGTWO S2 LCEFCBG14 LCEFCBG15 DOPMUL: DOPMUL: DOPMUL: LCEGTWO S1 LCEGTWO S1 LCEGTWO S1 LCEGTWO S1 LCEGTWO S1 LCEGTWO S1

SUPPLY DOPMUL:3

LIFT 7

13 2 3 4 5 6 7 8 9 10 11 12 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 2 1 13 10 11 12 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 S2= 1 SUPPLY

350045814 350045815 350045816

LIFT 4

LIFT 5

LIFT 6

LIFT 8

32 31 32 3 4 5 6 7 8 9

DOPMUL:1

S1=

2

(50)

806515C01

7 -RAGESH.E.G

K.MOHAN

19.05.2015 NAVANEETHAN.T

350045814E02

HCE

A4

H Designer Checker Page Language Dept. Approver Product c. Date

Issue G F E D C B A

SHAFT ELECTRIFICATION

en LCE

-CONTROL PANEL 713868G01

R

SEP/ 375 LCECPU XH11 4

CALLS AND SIGNALS

6

139

1 2 MAIN FLOOR 713863G01 -E02 1/1 SEE PAGE 176:2 XF2 XF3 XF4 XF1 XS1 XS2 197:2 LCEFCB 713810G0*

(51)

A4

H Designer Checker Page Language Dept. Approver Product c. Date Issue

Issue G F E D C B A

1

en LCE

-

-PE PE XT1 XT2 XT3 XT4 XC11 XC12 XC20 XC1 XC3 XC4 375 LCECPU 379 LCE230 CONTROL PANEL 806 LCECCB* 51 52 42:DS 42:N 42:U 41 42:RB XB1 XB2 XB12 XB3 XW 63:B 45 -B87 65 SFD XB35 XB13 713859G0* 713856G0* 713864G01 713243G01 713873G01 44:2 77:S XB34 713203G0* 77:N XB27

CAR ROOF ELECTRIFICATION

AMD

DRIVE 2

XB26 713202G0* 53 713227G0* 713227G0* 77:U RAGESH.E.G 19.05.2015 350045814E03 HCE 227 XB32 713867G01 XB25 713227G0* 63:L

A-SIDE

XB7 XB16 XB28 XB29 DOOR DOOR B87 X16 B84 D2/5 7 X15 D2/1 D2/2 8 10,11 4,6 3 2 5 9 1 B90 X1/41 X1/+24 X1/G D1/3 D1/4

B-SIDE

X1/G X1/17 X1/16 X1/10 X1/30 X1/31 X1/SD D1/5 713359G0* AMD/B-48 49 45 44 46 B88 B89 XB8 XB17 XB30 XB31 B88 B89 2 1 1 1 2 3 4 TX RX 45 44 46 1). 2).PHOTOCELL CURTAIN OF LIGHT X2/13 87 X16 84 D2/5 7 X15 D2/1 D2/2 8 10,11 4,6 3 2 5 9 1 90 X1/41 X1/+24 X1/G D1/3 D1/4 X1/G X1/17 X1/16 X1/10 X1/30 X1/31 X1/SD D1/5 713359G0* AMD/A-48 49 464445 88 89 88 89 2 1 1 1 2 3 4 TX RX 45 44 46 1). 2).PHOTOCELL CURTAIN OF LIGHT X2/13 43 44 XB15 XB14 713201G0* 713200G0* K.MOHAN NAVANEETHAN.T 57 -57 57 XB6 57 B41 -B41 B41 B41 728777G0*&779496G01 XB5 XB4 713857G0* 68:U -SLS X2/1 X2/2 68:U XB45 -LCEABB XO28 XI28 -LCEABB XO30 XI30 983587G01 983587G01 762579G0* 804859G0* 762579G0* 804859G0* 717 LCEABB 717 LCEABB WHEN FRD RU SEE PAGE *E26 728777G0*&779496G01 53 XB23 XB22 XB21 61:U 30 G G 728776G0*/713226G0* 61:N G

(52)

X12

A4

ELECTRIFICATION

Issue

Dept.

Approver Product c. Date Issue en LCE K.Sinisaari

-

1356801E03

XS1 H G F E D C B A

1/1

-ALTE

806 LCECCBN

XB18 _INDUCTION LOOP AMPLIFIER 1375559G* 713815G* KNXRIF(KRM)

CAR

OR KNX99 OR LCEALM

Car operating panel

X1 COP:2 818923G* J3 J1 SD Card COP:2 -ILS 772819G* ILS 50057251G* 100 INDICATION XMM3 J2 J1

32 KDCMUL:1

1356781G* -COP:2 -LCECOB 801118G* 96 801047G* 1 2 Jumper 804141G* J4

KDCCDM

3 CAR POSITION INDICATOR 29.07.2011 J.Åberg J.Åberg

COP:1

4 JM DIN1 JM DIN2 -TTC J10 R=120ohm ALARM _J7 J11 X1 96:EXT2 713810G* DESTINATION INDICATOR 5 J6 BUTTON BUS 6 7 8 9 - 0 * J5 J1 J8 J2 1356782G* KEYPAD KEY SWITCHES FUNCTION BUTTONS 31:1 31:2 31:3 31:T 31:T-1 31:n CALL BUTTONS 713810G* LCECOB CH 885908G* LCECOB 772817G* 856300G* 772815G* 39 44:1 -CH CH 801119G* 96:EXT1 DESTINATION INDICATOR ILS 766: AUDIO

(53)

1

BLACK 1

SEP

_{CAR TOP BOX}

NOTE:REMOVE XC11/1 CONNECTION FOR ADDITIONAL CAR POWER SUPPLY

713864G01

GN-YE

8

9

10

1

2

3

4

5

BLACK 3 BLACK 4 14x0.75 mm2 + (NUMBERED 1 - 14 / BLACK) 1x1,5 mm2 + (GREEN-YELLOW) 2x0,5 mm2 + (SHIELDED PAIR / BLUE & WHITE) 2x0,5 mm2 (SHIELDED PAIR / ORANGE & WHITE)

6

BLACK 5 BLACK 6 BLACK 7 BLACK 8 WHITE

1

2

3

4

5

6

7

8 XT1

7 XT2

BLACK 1 BLACK 2 BLUE BLACK 13 BLACK 9 BLACK 10 BLACK 11 BLACK 12 BLACK 14 WHITE ORANGE Shield

A4

Travelling cable I

ELECTRIFICATION

Issue

Dept.

Approver Product c. Date Issue en LCE RAGESH.E.G 19.05.2015

-

350045814E03 H G F E D C B A

4

-HCE K.MOHAN NAVANEETHAN.T WHITE BLUE BLACK 13 GN-YE

1

2

3

4

5

6

7

8

1

2 XC20

XC12

2

3

4

5

6

7

8 XC11

BLACK 9 BLACK 10 BLACK 11 BLACK 12 ORANGE BLACK 14 WHITE BLACK 2 BLACK 3 BLACK 4 BLACK 5 BLACK 6 BLACK 7 BLACK 8 Shield

(54)

START PERMIT SW MAINS 400V +10%/-15% 50-60Hz (N)/230V *E23 F1 F10 1 3 2 4 L1 X4 XD1/7 XD1/3 XD1/5 -XD5/9 XD5/10 SEE PAGE -E04 2/2 D3 PE1

MODULE

XD1/1 XD5/1 XD5/3

KDA

395

-E04/2 A1 K201/2 K201/4 K201/6 XM17/2 XM17/1 XM16/2 XM16/1 F3/2A F2/2A F1/1A -X3/1

379:1

X4 LCECPU 400VAC +

379 MAP

723 LCEREC

375

-+ 24V 24V XM16/4 XLH9/1 F5/4A XM16/3 -F4/4A X3/3 _A B X1/3 XM5/5 XM5/4 XM5/1 XM5/2 X2/3 X2/1 PE 1a

LCE230

XM5/5 XM5/4 XM5/1 XM5/2 DOOR 230VAC F6/2A XH2/3 F7/2A SAFETY CHAIN SEE PAGE -E05 230VAC XLH2/5 XLH2/4 XLH2/1 XLH2/2 XLH1/5 XLH1/4 XLH1/1 XLH1/2 XLH3/3 X3/5 220 X1/1 X3/9 X3/10 X3/7 X3/8 XM16/3 XM16/4 XM16/1 XM16/2 XM17/1 XM17/2 + 24V X3 X5 F8/8A CONTROLLER CAR SHAFT LOP230 T1 T2 L1 L2 T3 L3 XLH9/2 XM25/2 XM25/2 XM25/1 XM25/1 -+ 20V L2 262/2 L1 230VAC 20VAC 20VAC 1b 3a 3b 2a 2b 239 MAIN RELAY OUTPUT FROM SW. 230VAC N/230VAC SAFETY CHAIN

A4

KONE Corporation

DRIVE MODULE

2 KDM

/

E.Riikonen / Jomine

J.Kantola

en

HAT

2011-09-19

J.Helvilä

LCE

A

1 1374506E04

34(84)

MCCB2

392

377

XRD/4 XRD/3 14 201:3 201:4 A1 33(83) X8/2

385

A2

DRIVE MODULE

A

13 X8/3 K201 10 1 XFB5/2 X4/2 K201 XD1

MACHINERY

(

395

22 21 XFB5/1 3 4 XLD5/1 XLD5/2

MODULE

K219 5(A1) 1(A2) XF1/1

KDA

XF1/2 XRD/1

367

A1 A2 A2

DCBG

OPTIONAL FAN ) XRD/2 X4/1 X4/3

I/O BOARD

A1

388

XB11/1 XB11/2

BCX08

XMS1/2 43(53) 44(54) XMS1/1 SEE PAGE -E04 2/2 B2 SEE PAGE -E04 2/2 D5 L’ L MAIN CONTACTOR CONTROL MAIN CONTACTOR STATUS PWM ENABLE MFAN OUT GND 24V MC INPUT L’ LRFI XD5/2 XS3/1 XS3/2

XD4 removed, F2/2A

XD1/2 387:1

20.4.-12

N’ N

JKa

RFI 387:2 N’ N N/230VAC L1 L2 L3 L1 L2 L3 L1 L2 L3

220:1

L2 201:3 21 22 201:3 201:4 1(13) 2(14) 2(14) 1(13) 22 21 201:4 201:4 5(33) 6(34) 201:3 6(34) 5(33) 201:3 201:4 3(43) 4(44) 4(44) 3(43)

(55)

A4

KONE Corporation

DRIVE MODULE

KDM

RAGESH.E.G

K.MOHAN

en

HCE

19.05.2015

NAVANEETHAN.T

LCE

-

2 350045814E04

4 1 2 XMEN1 5 1 2 6 XMEN5 1 2 3 K1 X6 3 +15V 4 5 6 1 2 X7 A -FRD UK/EN/HK, LPS VN K2 FRD UK,EN,HK, LPS VN RS485 A A+ B+ B-GND A- BC D E F +15V RS485 B +24V GND

367 I/O BOARD

1 2 ENCODER 6:3 XLG1 2 3 4 1 2 XEIN1 5 5 6 XRS1 1 2 XAP1 3 4 RS485 A RS485 B 24VDC/IN GND

379

15VDC/IN XBR4 1 2 XBAT1 GND ENCODER A+ ENCODER B+ ENCODER B-GND ENC ENCODER A-ENC PWR PAGE -E04 1/2 F6 TACHO OUT-TACHO OUT+ BAT 12V GND FRD UK/EN/HK, LPS VN

BUP2

3 1 2 1 2 3 XPB4 XAP1 4 GND 24VDC IN 24VDC OUT 24V WEIGHT+ WEIGHT-GND PTC IN TGND NTC IN BRAKE ENABLE GND BRAKE FB1 BRAKE CTRL2 BRAKE V RED1 BRAKE CTRL1 BRAKE FB2 BRAKE V RED1 DRIVE ENABLE GND PE 220/L1(220:1/L1) PAGE -E04 1/2 F6 4 BR1

375

-E04/1 A6

MODULE

220/L2(220:1/L2)

395 KDA

220/L3(220:1/L3) SEE PAGE -E04 1/2 E4 PE 2 1

MAP

LCECPUnc

2 0/12V 12V 1 1 2 3 XW1 2

MAP

HOISTING MOTOR ENCODER

375:1

LOPCB

1 SIGNAL 1 1:T THERMISTORS MX10/MX20 2 200V 11:1

MACHINERY

200V 11:2 5 6 BR2 2 1 XL6 XM14

377 DCBG

K201 2 1 4 3 6 5 71 72 MACHINERY 2 1 2 1:T 4 3 61 62 F298 3 XT1 MX14 XB1 MX10/MX20 1 1 3 XBR1 4 6 XBR2 5 4 2 3 1 8 10 6 7 9 MX14 PE

DRIVE MODULE

AC X20 DC PE L1 L2 L3 1 2

385

U W V DC AC D1 I(Q2) 2 K1 XB11 1 230V K2 TR1

388 BCX08

1 2 3 4 2 XS3 Q2 I(Q2) I(Q4) Q4 330 KR7 KR7 XB1 4 6 3 5 9 7 10 2 1 8 I(Q4) 1 15V

SEP

CAR

BU 1 BK 1 2 2 BN 3 64 LWD 3 3 2 1 XW XW XB50

(56)

A4

Issue G F E D C B A

SAFETY CHAIN

1

en

LCE J.Kantola

17.05.2002

-

_811852E05

LOPCB

SHAFT

MAP

379:1

INPUT 2

LOP230

-121:E 121:P XLH3/3 XLH3/1 -121:P XM4/3

CAR DOOR CONTACT XLH2/2 XLH8/9

SHAFT

INPUT 3 INPUT 1 INPUT TO SW. SHAFT DOOR CONTACT

STOP CONTACT INPUT TO SW. MAIN RELAY OUTPUT FROM SW. CONTACTOR R=0 ohm. F2/6,3A(MX20) F1/1A test

379:1

LOP230

LCEADO

XLH4/5 XLH4/1 XLH4/3 XLH5/7 XLH5/5 XLH5/1 XM4/1 XC1/3 INPUT TO SW. 2 1 127 XC1/1 XC1/5 4 763610G** 230VAC

379

713160G02 6 TEST RESET

375:1

(not in use) NORMAL XLH5/3 270:RB 5B6 0/24V X5/24,25 XC1/7 ECC TO MAIN

D

763610G**

MAP

XLH7/1 2 XLH8/1 XLH6/1 -E04,1/F2 XH2/1 XH2/3 XD1/5 XC1/9 XLH8/7 XM5/2 XM3/3 XM3/1 XLH1/1 XLH1/2 XLH8/3 XLH7/3 XLH6/3 COD POWER SUPPLY E04-1/C3 122:1 XD1/7 COD SOD COD SOD COD SOD SOD 121:2 121:1 121:T 122:T 122:2 122:T-1 121:T-1

CAR

CCB CCB 57 XT4/7 XB1/3 XB1/1 XB2/3 XB2/1 XB3/5 XB3/3 XB3/1 XB4/3 XB4/1 XB5/3 XB5/1 XB6/3 XB6/1 XB7/4 XB7/2 XB8/4 XB8/2 51 52 41 42:DS 42:RB 42:N 42:U B41 63:B 57 87 B87 XT5/3 -FRD CS -B41 -57 -B87 270 6 2 5 1 1 test K486 K443-1 K443-2 K487 K553

CIRCUIT

SEE PAGE 14 13 14 13 14 13 22 21 3 4

ADO/ACL--E14 XL8/1 XL8/2 XL8/3 _0/24V +24V XL8/4 763600G01 P. Huotari A. Jokivalli ADO/ACL 121:E ADO/ACL 125:2 -155 -125:2 -153 153 155 112:1 112:2 -125:3 123:1 125:3

SHAFT

-121:E -112:2 -63:L 63:L F2/2A(MX10) CCBN XT4/1 XB12H/1 -53 53 C 125:3 added 35/04 JKa 125:1 -125:1

D LCECCBN* connection added 15/04/05 JKa

XB12H/2 CCBN CCBN XT4/5 XT5/5 XB40/2 XT4/3 XT4/1 CCB

806 LCECCB*

713710G11/ 802850G11/ 802890G11 XB40/1 WHEN FRD RU SEE PAGE *E26

(57)

2 1

LIFT-1

350045814

LIFT-2

350045815

LIFT-3

350045816

1

X5

12 2 0 S1 FID1 0 BN 3 FID2

722:2 LCEOPT

GN 4 EPD1 YE 1 F S1

X5

722:2 LCEOPT

1

X5

8

X5

7 FIDA1 FIDA1 7 7 FIDA2 GY

OPT1

BN GN FIDA1 FID A 1 YE WH GY FRD EAQ 12 2 0 S1 FID1 0 1 EAQ BN 3 FID2 GN 4 EPD1 YE 1 F 1 S1 EAQ EAQ RD BU RD BU

X5

WH RD 8 FIDA2 GY

OPT1

751288G0* BU 1 2 2 0 RD BU S1 FID1 0 BN 3 _FID2 GN 4 _EPD1 YE 1 F S1

722:1 LCEOPT

WH 8 _FIDA2 GY 751288G0* FID B/S FID M EPD SIGNAL EPS G -EPS S FID A FRD 1 FRD

722:1 LCEOPT

X5

FRD WH 10 GND PK 10 GND PK PK 10 _GND PK 2 1 2X0,34 2X0,34 2 1 XC20 XC20 XC20

KRM

KNX M

KRM

KNX M

KRM

_{KNX M}

Controller

_Controller

Controller

A4

Issue G F E D C B A

1

en

LCE

-HCE

-OPTIONAL PC-BOARD WIRING

option Box 367

RAGESH.E.G

K.MOHAN

19.05.2015

NAVANEETHAN.T

350045814E06

Option BOX

SEP

XM13A

_{722 LCEOPT}

XM13B 1 2 3 4 5 6 1 2 3 4 5 6 713370G01 XM13

375 LCECPU561

1 2 3 4 6 5 +24V 0/24V TX+ TX-RX+ RX-RS485 713381G01

(58)

120 Ohm./0.5W -E01 SEE PAGE 1/1 D3 230VAC HCE

A4

H

Issue Page G F E D C B A

2

LCE

-en

GROUP CONNECTIONS

-NETWORK 1

2xLCEGTWO

X2 1 2 XG1B XG1A 731:2 LCEGTWO 1 2 120 Ohm./0.5W SERIAL NET KGC KGC XG3A XG3B 1 2 1 2 XH15 1 2 3 X3 2 2 BR1 1 2 3 XS1 1 2 3 3 4 1 2 3 4 +24V 0/24V Roll Call +24VE 0/24VE +24VE 0/24VE 0/24VE TX-Roll Call TX+ +24VE 0/24VE TX+ TX-TX+ TX-TE XG1:1 1 2 LON ADAPTER MODULE 1 XH15 1 2 3 TX+ TX-TE KGC KGC BR2 1 3 1 3 X3 1 2 3 XS1 1 XH12 1 2 PE 3 2 3 +24V 0/24V TX+ TX-Roll Call RS485 4 6 5 SERIAL NET 4 5 6 XS2 1 2 3 4 5 6 -E10 X2 1 2 251 4 5 6 XS2 375 LCECPU561 XG1B XG1A 1 2 3 4 5 6 XG1:2 1 2 TX+ TX-TE XG4B XG4A 731:1 LCEGTWO 1 2 1 2 1 2 3 4 1 2 3 4 L N PE +24V 0/24V SEE PAGE +24VE 0/24VE +24VE 0/24VE TX+

TX-LIFT-1

350045814

+24V 0/24V Roll Call +24VE 0/24VE 0/24VE TX-Roll Call TX+ TX+ TX-TE SEE PAGE 3 A3 LIFT-2 -E28 SEE PAGE X1A KGC 1 2 KGC:1 NETWORK 1 KGC 2 2 BR1 BR2 1 3 1 3 KGC KGC

RAGESH.E.G

K.MOHAN

19.05.2015

NAVANEETHAN.T

350045814E06

(59)

X1B 1 2 NETWORK 2 KGC KGC KGC:1 SEE PAGE 4 A2 LIFT-3

RAGESH.E.G

K.MOHAN

19.05.2015

NAVANEETHAN.T

350045814E06

-E01 SEE PAGE 1/1 D3 230VAC HCE

A4

H

3

LCE

-en

-2xLCEGTWO

GROUP CONNECTIONS

NETWORK 1

X2 1 2 XG1B XG1A 731:2 LCEGTWO 1 2 SERIAL NET 2 XG3A XG3B 1 2 1 2 XH15 1 2 3 2 BR1 BR2 X3 1 3 1 1 2 3 XS1 1 2 3 3 4 1 2 3 4 +24V 0/24V Roll Call +24VE 0/24VE +24VE 0/24VE 0/24VE TX-Roll Call TX+ +24VE 0/24VE TX+ TX-TX+ TX-TE XH15 1 2 3 TX+ TX-TE 2 2 BR1 BR2 1 3 1 3 X3 1 2 3 XS1 1 XH12 1 2 PE 3 2 3 +24V 0/24V TX+ TX-Roll Call RS485 4 6 5 SERIAL NET 4 5 6 XS2 1 2 3 4 5 6 SEE PAGE 4 A3 LIFT-3 X2 1 2 251 4 5 6 XS2 375 LCECPU561 XG1B XG1A 1 2 3 4 5 6 TX+ TX-TE 3 XG4B XG4A 731:1 LCEGTWO 1 2 1 2 1 2 3 4 1 2 3 4 L N PE +24V 0/24V +24VE 0/24VE +24VE 0/24VE TX+

TX-LIFT-2

350045815

+24V 0/24V Roll Call +24VE 0/24VE 0/24VE TX-Roll Call TX+ TX+ TX-TE -E10 SEE PAGE SEE PAGE 2 G3 LIFT -1

(60)

SEE PAGE 3 G2 LIFT-2 -E01 SEE PAGE 1/1 D3 230VAC

A4

H

4

LCE

-en

-2xLCEGTWO

GROUP CONNECTIONS

NETWORK 2

120 Ohm./0.5W X2 1 2 XG1B XG1A 731:2 LCEGTWO 1 2 SERIAL NET 2 XG3A XG3B 1 2 1 2 XH15 1 2 3 2 BR1 BR2 X3 1 3 1 1 2 3 XS1 1 2 3 3 4 1 2 3 4 +24V 0/24V Roll Call +24VE 0/24VE +24VE 0/24VE 0/24VE TX-Roll Call TX+ +24VE 0/24VE TX+ TX-TX+ TX-TE XH15 1 2 3 TX+ TX-TE 2 2 BR1 BR2 1 3 1 3 X3 1 2 3 XS1 1 XH12 1 2 PE 3 2 3 +24V 0/24V TX+ TX-Roll Call RS485 4 6 5 SERIAL NET 4 5 6 XS2 1 2 3 4 5 6 X2 1 2 251 4 5 6 XS2 375 LCECPU561 XG1B XG1A 1 2 3 4 5 6 TX+ TX-TE 3 XG4B XG4A 731:1 LCEGTWO 1 2 1 2 1 2 3 4 1 2 3 4 L N PE +24V 0/24V +24VE 0/24VE +24VE 0/24VE TX+ TX-120 Ohm. 0.5W +24V 0/24V Roll Call +24VE 0/24VE 0/24VE TX-Roll Call TX+ TX+ TX-TE

LIFT-3

350045816

-E10 SEE PAGE

SEE PAGE 3 G3 LIFT-2

RAGESH.E.G

K.MOHAN

19.05.2015

NAVANEETHAN.T

(61)

GND XL1/9 XL1/9 +12Vbatt SW. SW. XL1/11 XL1/12 Designer Checker Page Language Dept. Approver Product c. Date Issue

Issue XL1/11 XL1/12 77:U 77:N 77:S XB27/2 XB27/1

SERVICE LIMIT INS. DOWN INS. UP INSPECTION GND 270:N XL1/6 XL1/5 XL2/1 +12Vbatt

CONTROL MODULE

+24VDC

379 LCEADO

-68:U XB45/1 XB45/2 -E04 1/2 D3 68:U XT6/2 -E04 1/2 B2 +24VDC SFD RX XL2/2 7 8 XL1/7 XL1/6 30 XL1/5

MAP

270 270:U XL1/7 XT2/4

A4

GND RS485 B30 61:U B-SIDE 61:N XB12N/1 XT6/1 HAS XT1/2 XB22/4 XB23/4 INSPECTION XB52/2 +24V GND XB52/1 F1 XT3/3 XT3/4 XB51/1 XC3/4 XC3/5 XB51/2 1A F5 4A +24VDC XM5/5 XM5/4 806:REC1 230VAC 24VDC N L -/24V +24V 230VAC XC11/2 -/24 XB21/4 XB24/4 68:U H G F E D C B A

1

en LCE J.Kantola 19.05.2005

-

861393E07

-77:U 77:N 42:DS 42:U 42:N XT1/5 XT1/6 XT1/3 XT1/4 XT1/7 XT1/8 XC11/5 XC11/6 XC11/3 XC11/4 XC11/7 XC11/8 XC12/4 0/12Vbatt 77:S RXD TXD SI2/0.5A +12Vbatt LOP24V

806 LCECCBN*

375 LCECPUnc

XL1/2 XL1/2

375:1 LOPCB

XL1/10 279 LOP0V DOWN UP DRIVE XL1/10 XL1/1 XL1/1 +24VDC F1/1.85A TX

CAR

LCM RDF RDF RDF RX XL1/3 +15V 61:U 61:N XL1/3 XL1/4 XL1/4 30 XL1/8 XL1/8 77:N 77:U B30 0/12Vbatt 0/12Vbatt A. Jokivalli P. Huotari R R

Owner Manual Kone

lïåÉêÛë=açÅìãÉåí~íáçå=

ltkboÛp=j^kr^i=

j^pqbo

=

=

fk=`ljmif^k`b=tfqe=

b`=ifcqp=afob`qfsb=VRLNSLb`=

~åÇ=

qeb=ifcqp=obdri^qflkp=pKfK=NVVT=L=UPN=

=

=

pÉêá~ä==

kìãÄÉê=

QONQRPTT=

=

=

páíÉ==

^ÇÇêÉëë=

iáÑí=^I=

P=pí=m~ìäë=mä~ÅÉI=

`Ü~êäÉë=píêÉÉíI=

pÜÉÑÑáÉäÇI=

pN=Ok_=

Owner’s Documentation

Contents

OWNER’S DOCUMENTATION IN COMPLIANCE WITH

THE LIFTS DIRECTIVE 95/16/EC,

THE LIFTS REGULATIONS S.I. 1997/831

And

BS EN 81-1 : 1998 + A3 : 2009

Elevator Type - KONE MonoSpace

Contents

0.

Introduction

1.

Basic Documentation

2. Technical Documentation

3.

Maintenance Instructions

4.

Instructions For Use

5.

Additional Information

Owner’s Documentation

Introduction

0. INTRODUCTION

Copyright

Owner’s Documentation

Introduction

National Statutory Requirements

Authorisation Notice

Disclaimer Of Warranties And Liabilities

Owner’s Documentation

Introduction

Illustration Notice

Audience

Owner’s Documentation

Contacts

Sales And Servicing Offices - KONE plc

KONE plc Call Centre

Tel :- 0800 652 0692

KONE plc Head Office

KONE (NI) Ltd

Owner’s Documentation

Basic Documentation

1. BASIC DOCUMENTATION

1.1 Declaration Of Conformity

2

1.2 Detailed Specification

3

1.3 Log Book

5

lïåÉêÛë=açÅìãÉåí~íáçå=

_~ëáÅ=açÅìãÉåí~íáçå

ab`i^o^qflk=lc=`lkclojfqv=clo=^=jçåçpé~ÅÉ

=bibs^qlo=

fkpq^iibo=

il`^qflk=lc=fkpq^ii^qflk=

pÉêá~ä=kìãÄÉê=

_=bibs^qlo=