EN - For pricing and availability in your local country please visit one of the below links:
DE - Informationen zu Preisen und Verfügbarkeit in Ihrem Land erhalten Sie über die unten aufgeführten Links:
FR - Pour connaître les tarifs et la disponibilité dans votre pays, cliquez sur l'un des liens suivants:
EN
This Datasheet is presented by
DE
Dieses Datenblatt wird vom
FR
Cette fiche technique est
DTC114EM / DTC114EE / DTC114EUA
Transistors
DTC114EKA / DTC114ESA
Rev.B
1/3
100mA / 50V Digital transistors
(with built-in resistors)
DTC114EM / DTC114EE / DTC114EUA /
DTC114EKA / DTC114ESA
zApplications
Inverter, Interface, Driver
zFeatures
1) Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see
equivalent circuit).
2) The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input. They also
have the advantage of almost completely eliminating parasitic effects.
3) Only the on/off conditions need to be set for operation, making the device design easy.
zStructure
NPN epitaxial planar silicon transistor (Resistor built-in type)
zDimensions (Unit : mm)
Abbreviated symbol : 24 Abbreviated symbol : 24
Abbreviated symbol : 24 Abbreviated symbol : 24
Abbreviated symbol : C114ES
DTC114EM DTC114EE
Each lead has same dimensions Each lead has same dimensions
Each lead has same dimensions Each lead has same dimensions
DTC114EUA (1) IN (2) GND (3) OUT ROHM : VMT3 (1) GND (2) IN (3) OUT ROHM : EMT3 1.6 0.7 0.15 0.1Min. 0.55 0.2 1.6 1.0 0.3 0.8 (2) 0.5 0.5 (3) 0.2 (1) (1) GND (2) OUT (3) IN ROHM : SPT EIAJ : SC-72 DTC114ESA (1) GND (2) IN (3) OUT ROHM : SMT3 EIAJ : SC-59 DTC114EKA (1) GND (2) IN (3) OUT ROHM : UMT3 EIAJ : SC-70 (3) 0.32 0.8 1.2 0.13 0.5 0.22 0.4 0.4 1.2 0.8 0.2 0.2 (2) (1) 0.2 0.15 0.1Min. 0.9 0.7 1.25 2.1 0.3 (3) 0.65 (2) 2.0 1.3 (1) 0.65 0.45 2.5 (1) (2) (3) (15Min.) 5.0 3.0 3Min. 0.45 0.5 4.0 2.0 (2) (1) 2.8 1.6 0.4 (3) 2.9 1.9 0.95 0.95 0.8 0.15 0.3Min. 1.1
Transistors
DTC114EKA / DTC114ESA
zPackaging specifications zEquivalent circuit
TL UMT3 EMT3 SMT3 SPT DTC114EE DTC114EM Part No. DTC114EUA 3000 T2L VMT3 8000 T106 3000 T146 3000 TP 5000 DTC114EKA DTC114ESA − − − − − − − − − − − − − − − − − − − − Package
Packaging type Taping Taping Taping Taping Taping
Code Basic ordering unit (pieces)
zAbsolute maximum ratings (Ta=25°C)
Limits Parameter Symbol VCC 150 200 300 50 −10 to +40 50 100 150 −55 to +150 DTC114EE
DTC114EM DTC114EUA DTC114EKA DTC114ESA
V V mA mW °C °C VIN IO IC(Max.) PD Tj Tstg Unit Supply voltage Input voltage Output current Power dissipation Junction temperature Storage temperature
zElectrical characteristics (Ta=25°C)
Parameter Symbol VI(off) VI(on) VO(on) II IO(off) R1 GI R2/R1 fT Min. − 3 − − − 7 30 0.8 − − − 0.1 − − 10 − 1 250 0.5 − 0.3 0.88 0.5 13 − 1.2 − V VCC=5V, IO=100µA VO=0.3V, IO=10mA IO/II=10mA/0.5mA VI=5V VCC=50V, VI=0V VO=5V, IO=5mA VCE=10V, IE=−5mA, f=100MHz ∗ V mA µA kΩ − − − − MHz
Typ. Max. Unit Conditions
Input voltage Output voltage Input current Output current Input resistance DC current gain Resistance ratio Transition frequency ∗ Characteristics of built-in transistor
R1 R2 IN GND OUT IN R1=R2=10kΩ GND OUT
DTC114EM / DTC114EE / DTC114EUA
Transistors
DTC114EKA / DTC114ESA
Rev.B
3/3
zElectrical characteristic curves
INPUT VOLTAGE : V
I(on)
(V)
OUTPUT CURRENT : IO (A)
100µ 200µ 500µ1m 2m 5m 10m 20m 50m 100m 100 50 20 10 5 2 1 500m 200m 100m VO=0.3V Ta=−40°C 25°C 100°C
Fig.1 Input voltage vs. output current (ON characteristics)
INPUT VOLTAGE : VI(off) (V)
OUTPUT CURRENT : Io (A) 0 3.0 10m 1µ 2m 5m 1m 200µ 500µ 100µ 20µ 50µ 10µ 2µ 5µ 0.5 1.0 1.5 2.0 2.5 VCC=5V Ta=100°C 25°C −40°C
Fig.2 Output current vs. input voltage (OFF characteristics)
OUTPUT CURRENT : IO (A)
DC CURRENT GAIN : G I 100µ200µ 500µ1m 2m 5m 10m 20m 50m100m 1k 500 200 100 50 20 10 5 2 1 VO=5V Ta=100°C 25°C −40°C
Fig.3 DC current gain vs. output current
OUTPUT CURRENT : IO (A)
OUTPUT VOLTAGE : V O(on) (V) 100µ 200µ 500µ1m 2m 5m 10m 20m 50m 100m 1 500m 200m 100m 50m 20m 10m 5m 2m 1m lO/lI=20 Ta=100°C 25°C −40°C
Fig.4 Output voltage vs. output current
The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance.
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
