SILT PUSHERS
NOTHING HOLDS YOU BACK.
CONVER C86 SILT PUSHER EN
SILT PUSHERS 2 SILT PUSHERS
CONVER C86 SILT PUSHER – nothing hold you back
The C86 silt pusher is designed with a view to efficiency, durability and operating ease and is ideal for effectively maintaining and cleaning ponds and waterways.
Thanks to the sustainable design of the C86 it removes sludge in a responsible manner and at the same time, it restores the soil profile.
The C86 is equipped with a double hydraulic winch. This tried-and-tested system gives the boat great thrust, even in shallow water and under the most unfavorable conditions, both forwards and backwards.
As a result, the C86 is hardly susceptible to tougher dirt and obstructions.
SILT PUSHERS 3 SILT PUSHERS
SILT PUSHERS 4 SILT PUSHERS
CONVER C86 SILT PUSHER – key features
Sturdy and durable SILT PUSHER
Front and back winch
Ideal for removal of silt from shallow inlands water ways
Electric proportional of all hydraulic functionsSILT PUSHERS 5 SILT PUSHERS
BENDS AND BRIDGES.
SILT PUSHERS 6 SILT PUSHERS
Customer-specific colour optional
Total blade width up to 9 meters
Optional side pontoons
Compliant to the latest emission requirementsCONVER C86 SILT PUSHER – key features
SILT PUSHERS 7 SILT PUSHERS
PUSH UP TO 11000 LBS WITH THE POWERFUL
FRONT WINCH
SILT PUSHERS 8 SILT PUSHERS
Adjustable comfort seat with armrests
Engine control panel with hour counter, fuel gauge and winch pressure gauge
Acoustic warning for oil pressure and cooling water temperature
Multifaster quick coupling
Anti-vandalism cover over the cabin
12V connection on dashboard
4x towing eye
CONVER C86 SILT PUSHER – standard equipment
SILT PUSHERS 9 SILT PUSHERS
RESTORE THE SOIL PROFILE.
SILT PUSHERS 10 SILT PUSHERS
CONVER C86 SILT PUSHER – technical specifications
DIMENSIONS (LxBxH) 8,00 x 1,70 x 1,42 m without pontoons
8,00 x 2,80 x 1,42 m with pontoons DIMENSIONS HULL (LxBxH) 4,75 x 1,70 x 0,80 m
MATERIAL 3 mm RAEX S420
PONTOONS (OPTINAL) 2x 950 l
WEIGHT EXCL. IMPLEMENTS 3.300 kg
DRAFT Approx. 0,45 m
COLOUR ENGINE
Orange RAL 2004 / Grey RAL 7012
Yanmar 4TNV88C Common-rail 4-cylinder Diesel (48 HP @ 3000 rpm)
FUEL CONSUMPTION 5 - 6 l/hr
FRONT WINCH 5.000 kg, Standard steel cable 12 mm x 240 m, 12 m/min REAR WINCH 2.500 kg, Standard steel cable 10 mm x 260 m, 24 m/min STEERING Height adjustable rear arm with a 2x 50° steering angle HYDRAULIC INSTALLATION 1x Load Sensing 1x gear heel pump
FUEL TANK 75 l
HYDRAUIC TANK 90 l with suction- and return filter
CREW 1 operator
SILT PUSHERS 11 SILT PUSHERS
SILT PUSHERS 12 SILT PUSHERS Industrieweg 18, 4283 GZ Giessen – The Netherlands
T +31 (0)183-447272 [email protected] I www.conver.com
Conver is a Dutch manufacturer that develops and builds cutting-edge machines. We have built a reputation for quality and reliability for over 30 years. Conver machines enable you perform water management responsibly. We rely on our knowledge and experience to provide custom solutions for floating, amphibious and on-land machines. At Conver, we know exactly what our customers need: professional advice and great service. That makes Conver your brand of choice for water management.
Nothing holds you back
IT’S IN OUR NATURE
Experience the C86 silt pusher
Conver C86 silt pusher
The C86 silt pusher was designed to be efficient, durable and easy to use.
This compact silt pusher is ideal for maintaining and cleaning ponds and watercourses. The durable design of the C86 enables it to restore the bottom profile while removing sludge at the same time.
Built on experience
The C86 silt pusher is the result of many years of experience and innovation. This is immediately evident in the ergonomic and user-friendly design that enables you to do your maintenance work efficiently.
Nothing holds you back
The C86 is equipped with a double hydraulic winch. This proved drive system gives the silt pusher major pulling power both forward and in reverse, even in shallow water and under the heaviest conditions. This means the silt pusher is virtually unaffected by coarse debris and obstructions.
Push blades
A variety of push blades are available for the C86. They can easily be switched.
You can choose blades with a maximum working depth up to 2 metres and a working width up to over 8 metres.
Custom work
Of course a number of implements are available for this machine, making it even more versatile. A number of options are also available for the operator to personalise the workplace.
Contact
For more information contact our office at +31 183 447272 or send an e-mail to [email protected].
Conver B.V. | Industrieweg 18, 4283 GZ, Giessen | Nederland T: +31 183 447272 | E: [email protected] | I: www.conver.com
Conver is part of the Dutch Power Company together with Herder, Precision Makers, Roberine and Votex.
SPECIFICATIONS CONVER C86
Dimensions (LxWxH)* 8,00 x 1,76 x 1,42 m
Weight 3.300 kg (Excluding implements)
Depth approx. 0,45 m
Colour Orange RAL2004/Grey RAL7012
Engine Water-cooled 4 cylinder, 36 kW at 3000 rpm Fuel consumption 5 – 6 L/hour
Front winch** 5,000 kg, 12 mm 6×36 WSC 240 m, 12 m/min Rear winch** 2,500 kg, 10 mm 6×36 WSC 260 m, 24 m/min Controls Electrical operation
Hydraulic system 1 x Load Sensing plunger pump, 1 x Gear pump
Fuel tank 75 L
Hydraulic tank 90 L with intake and return filter
* Operation without push blade
** Hydraulic winches with automatic spooling system
