• No results found

Updating Your Firmware

N/A
N/A
Info
Download
Protected

Academic year: 2021

Share "Updating Your Firmware"

Copied!
9
0
0

Loading.... (view fulltext now)

Download now ( 9 Page )

Full text

(1)
(2)
(3)

4. The folder should contain the following files:

5. Double‐click on the “start” file to run the firmware update program – the following screen will appear:

6. Click on the OK button to start the program. The drive will now address all data blocks to re‐flash them.

(4)

8. Remove the jumper from the VERTEX and click on the OK button to confirm normal mode of the VERTEX. 

(5)
(6)
(7)

APPENDIX I (top), II (bottom) 

Firmware update Jumper

(8)

APPENDIX III. SATA Power and data cable connection (Notebook is different)

SATA  POWER Cable

SATA  DATA Cable

(9)

Firmware Version History

• Version 0112 (Feb. 2009)(Description: Basic I/O  optimized drive with SMART error logging) • Version 1199 (Feb. 2009) (Description: Enhanced performance I/O optimized drive)

References

Download now ( PDF - 9 Page - 355.52 KB )

Related documents

Updating Tape Drive Firmware

There are two ways to view the drive firmware version on a Quantum i40 or i80 tape library: from the operator panel on the library or the library’s web client..

Updating Device Firmware Via FTP

For the M-series, the following files should be copied from your vSpace folder(s) to your FTP host location:.. 

Backup Solutions with Linux on System z and z/vm. Wilhelm Mild IT Architect IBM Germany 2011 IBM Corporation

z/VM based recovery System z z/ VM Production Environment Backup Environment z/ VM Tape Backup - Real tapes - VTL/VTS z/VM Backup an Restore Manager z/VM based Backup

DiCE INSTALLATION INSTRUCTION

Updating of the internal software (also called Firmware) in a DiCE unit is done via the VIDA All-in-one client.. When updating the firmware, the DiCE unit shall be connected with a

Size and shape variations of the bony components of sperm whale cochleae

Variables like age, length and weight (closely related to growth, development and life history of the whales) could not be associated to shape and size variation of sperm whale

Crane

6.1 Sagging and slapping of the wire ropes; other hoist wire rope systems for container quay cranes and grab unloaders.. Section 2.1 showed one hoist wire rope system for

UFS Programming in LumenX

Software configuration for UFS programming consists of updating the version of LumenX Data Management Software on the Host PC, and then updating the firmware on the

MPC-based path following control of an omnidirectional mobile robot with consideration of robot constraints

7: The simulation results when the MPC-based control strategy was implemented: (a) superimposed snapshots, (b) wheel velocities, (c) robot velocities with respect to the body frame