Diagnostic Test Equipment

www.3M.com/telecom

3

Diagnostic

Test Equipment

Dynatel

™

_{Subscriber Loop Test}

Products 900 Series

Rugged and portable for harsh

environments, Dynatel test sets 900

Series offer the right mix of functions,

from loop diagnostic routines to fault

locating, transmission testing and

combination test/terminal capabilities.

3M

_Dynatel

_Subscriber

Loop Analyzer 965DSP

The Dynatel

_{Subscriber Loop}

Analyzer 965DSP is a

microprocessor-controlled integrated test set that

provides full-featured POTS,

wideband and DSL-specific testing.

The functions include fault location

and repair verification on twisted-pair

and drop cables (utilizing capacitance

bridge, resistance bridge and Time

Domain Reflectometer (TDR)

functions).

The Dynatel Subscriber Loop

Analyzer 965DSP executes a wide

range of individual tests, or performs

automatic test routines to categorize

and sectionalize problems. The

hand-held 965DSP test set is housed in

a lightweight, ergonomically designed

case for portability and ease of

handling. The unit is weather-resistant

and weighs only 4.3 pounds (1.95 kg)

with battery, test leads and soft case.

3M

_Dynatel

_Subscriber

Loop Analyzer 965DSP/SA

The Dynatel Subscriber Loop

Analyzer 965DSP/SA delivers all

the multi-function capabilities of

the Dynatel 965DSP and provides a

Spectrum Analyzer and E, F and G

noise-weighted filters. Wideband noise

measurements are made with the E

(ISDN/ISDL), F (HDSL) and G

(ADSL) filters. The Spectrum

Analyzer test function enables the

operator to view the high-frequency

communications spectrum and identify

spectral interferers such as crosstalk

noise generated by other services.

351 350

3M

_Dynatel

_Subscriber

Loop Analyzers 965DSP/ADSL

and 965DSP/SA/ADSL

The Dynatel

_{Subscriber Loop}

Analyzers 965DSP/ADSL and

965DSP/SA/ADSL feature an Alcatel

MTK-20150 modem chipset in the

proven 965DSP platform. The

965DSP/ADSL provides the ability

to perform active ADSL testing to

address the growing number of

residential and business ADSL

customers. It delivers all the

multi-function capabilities of the

965DSP plus the testing functions

of the new ADSL modem.

The 965DSP/SA/ADSL adds

comprehensive DSL parametric

measurements to this integrated

solution. Extended loss measurement

ranges, spectrum analyzer and E, F

and G filtered wideband noise

measurements complete this

comprehensive family of rugged loop

testers.

The units are weather resistant and

weigh only three pounds (4.5 lbs. with

test leads and soft case). Preserving the

rugged dependability of all Dynatel

products, the /ADSL option

incorporates an innovative design that

adds a durable “spacer” element to the

current 965DSP molded plastic case.

This spacer permits easy and robust

expansion of the new circuit board in

the existing test set.

3M

_{Far End Device II}

Designed to provide remote controlled

far end testing assistance during

subscriber loop testing, the 3M Far

End Device (FED) II is the perfect

companion to the Dynatel 965DSP

family of subscriber loop analyzers.

The FED enhances technician

productivity by connecting to the far

end of a cable pair to enable diagnostic

testing from the near end using the

DTMF signaling capability of the

965DSP, 965DSP/SA, 965DSP/ADSL

and 965DSP/SA/ADSL test sets.

3M

_Dynatel

_Subscriber

Loop Tester 945DSP

The Dynatel Subscriber Loop Tester

945DSP is a microprocessor-controlled

test set that provides full-featured

POTS testing. The 945DSP subscriber

loop tester performs a wide range of

voice band tests to analyze problems

on twisted-pair cables.

Weather-resistant and weighing only 1 pound,

the hand-held 945DSP test set is

housed in a lightweight case for

portability and ease of handling.

353 352

Kit Contents for 3M

_Dynatel

_{Subscriber Loop Test Products 900 Series}

Product 965DSP 965DSP/SA 965DSP/ 965DSP/ 945DSP

Description ADSL SA/ADSL

Standard Accessories

Analyzer • • • • •

Nickel metal hydride battery pack • • • •

AC adapter • • • •

Specified test cables • • • • •

Alkaline battery holder • • • •

Conductor strap • • • •

Wire gauge • • • •

Self-test circuit board • • • •

Instruction manual • • • • •

ADSL modem Optional Optional • •

Spectrum Analyzer Optional • Optional •

Specified batteries 4 alkaline AA

1030 conductor gauge 054007-31253 054007-31253 054007-31253 054007-31253 054007-31253

Alkaline battery holder/adapter 051138-57685 051138-57685 051138-57685 051138-57685 —

110/220 VAC adapter 051138-58628 051138-58628 051138-58628 051138-58628 —

Softcase (Model 1151) 051138-87178 051138-87178 051138-87178 051138-87178 051141-04458

Nickel metal hydride battery pack 051138-57686 051138-57686 051138-57686 051138-57686 — 1144 Black/red test lead, 051138-57648 051138-57648 051138-57648 051138-57648 051138-57648 alligator, bed-of-nails

1142 Blue/yellow test lead, 051138-57649 051138-57649 051138-57649 051138-57649 —

alligator bed-of-nails

1143 Green test lead, alligator, 051138-57650 051138-57650 051138-57650 051138-57650 051138-57650 bed-of-nails

Shorting strap, alligator 051138-58529 051138-58529 051138-58529 051138-58529 —

Optional Accessories

Black/red test lead, 4 mm banana 051138-57608 051138-57608 051138-57608 051138-57608 — Blue/yellow test lead, 4mm banana 051138-57610 051138-57610 051138-57610 051138-57610 —

Green test lead, 4mm banana 051138-57612 051138-57612 051138-57612 051138-57612 —

Shorting strap, 4 mm banana 051138-58532 051138-58532 051138-58532 051138-58532 —

Video training tape 054007-71941 — — — —

Cigarette adapter 051138-57744 051138-57744 051138-57744 051138-57744 —

IR adapter cable 051138-58764 051138-58764 051138-58764 051138-58764 —

1342 Far End Device II 051138-87639 051138-87639 051138-87639 051138-87639 —

with alligator clips

1343 Far End Device II 051138-87640 051138-87640 051138-87640 051138-87640 —

(bed-of-nails Test clips)

1344 Far End Device II 051138-89794 051138-89794 051138-89794 051138-89794 —

Features of the 3M

_Dynatel

_{Subscriber Loop Test Products 900 Series}

Features 965DSP 965 DSP-B 965DSP/SA 965DSP/ 965DSP/ 945DSP ADSL SA/ADSL

Resistance fault locate • • • • •

Open fault locate • • • • • •

Load coil count • • • • • Optional

Longitudinal balance • • • • • •

Caller Identification (CID) • • • • •

Split fault locate • • • •

Voltage measurement • • • • • • Tone source • • • • • • Current measurement • • • • • • Ohms measurement • • • • • • Soak Test • • • • • • Ohms-to-distance conversion • • • • • Loss measurement • • • • • • Noise measurement • • • • • •

Ringers count • • • • • Optional

Self-test and self-calibration • • • • •

Wideband noise/loss for • •

ISDN and xDSL

Line Prequalification tests for • • • • •

basic rate ISDN service

TDR • • • •

IR port (communication port) • • • • •

Stored results internal memory • • • • •

Communications craft set • • • • •

Measurement units Feet, meters, Feet, meters, Feet, meters, Feet, meters, Feet, meters, Feet, meters, Fahrenheit, Fahrenheit, Fahrenheit, Fahrenheit, Fahrenheit, Fahrenheit,

Celsius Celsius Celsius Celsius Celsius Celsius

Graphic display (backlit) • • • • • •

Auto diagnostic DC testing (loop) • • • • •

Auto diagnostic AC testing • • • • •

(transmission)

High insulation resistance test • • • • •

Resistance difference and • • • • •

loop resistance

Spectrum analyzer Optional • • Optional •

(includes E,F, G noise filters)

Fast Kick test • • • • •

Onboard operating instructions • • • • •

Ordering Information for the 3M

_Dynatel

_{Subscriber Loop Test Products 900 Series}

Ordering 965DSP 965 DSP-B 965DSP/ 965DSP/ 965DSP/ 945DSP

Information SA ADSL SA/ADSL

Packaging 1/cs. 1/cs. 1/cs. 1/cs. 1/cs. 1/cs.

Minimum order 1 each 1 each 1 each 1 each 1 each 1 each

Nickel Metal Hydride batteries, 051138-57603 051138-57603 — 051138-57603 — —

bed-of-nails clips, US

Nickel Metal Hydride batteries, 051138-58528 051138-58528 — 051138-58528 — —

4 mm banana plugs, multi-language

Nickel Metal Hydride batteries, — 051138-58643 — — — —

bed-of-nails clips, US w/out TDR

Bed-of-nails clips/ — — — — — 051138-87220

c-message weighting

Bed-of-nails clips/psophometric filter — — — — — 051138-87221

Single needle clips/ — — — — — 051138-87222

c-message weighting

Single needle clips/ — — — — — 051138-87223

psophometric filter

Electrical Specifications for 3M

_Dynatel

_{Subscriber Loop Analyzer 965DSP (A, B & SA)}

Main Functions Range Resolution Accuracy

Voltage (DC) 0 to 99.9 V 0.1 V 1% ± 0.5 V 100 to 300 V 1 V 3% Voltage (AC) 0 to 99.9 V 0.1 V 1% ± 0.5 V 100 to 250 V 1 V 3% Current 0 to 59.9 mA 0.1 mA 1% ± 0.3 mA 60 to 110 mA 0.1 mA 2%

Resistance and Soak Test 0 to 9999 Ω 1 Ω 1% ± 5 Ω

With CO voltage 0 to 9999 Ω 1 Ω 1% ± 50 Ω 10 k to 99.9 kΩ 0.1 kΩ 1% 100 k to 999 kΩ 1 kΩ 3% 1 M to 9.9 MΩ 0.1 MΩ 3% 10 M to 99 MΩ 1 MΩ 5% 100 M to 990 MΩ 10 MΩ 10%

Opens (no noise) 0 to 3,000 ft. (0 to 1000 m) 1 ft. (1 m) 1% ± 3 ft. (1 m)

3,000 to 10,000 ft. (1 km to 3 km) 1 ft. (1 m) 3% 10,000 to 50,000 ft. (3 km to 15 km) 10 ft. (10 m) 5% 50,000 to 100,000 ft. (15 km to 30 km) 100 ft. (100 m) 10% RFL Fault range 0 to 20 MΩ — — Resistance to 0 to 99.99 ΩRTS 0.01 Ω 0.1% of RTS ± 0.01 Ω

fault (no noise) 100 to 999.9 ΩRTS 0.1 Ω 0.2% of RTS ± 0.01 Ω

1 kΩto 7 kΩRTS 1.0 Ω 1.0% of RTS ± 0.01 Ω

Loss (& frequency)

With 600 ΩZin -40 to +10 dBm, 200 to 20kHz 0.1 dB, 1Hz, 1kHz 0.5 dB, 1% With 135 ΩZin -50 to +2 dBm, 20 k to 1200 kHz 0.1 dB, kHz 2 dB, 1% Noise metallic 0 to 50 dBrnc (-90 to -40 dBm0p) 1 dB 2 dB Noise to ground 40 to 100 dBrnc (-50 to 10 dBm0p) 1 dB 2 dB Longitudinal balance 0 to 70 dB 1 dB 2 dB 70 to 85 dB 1 dB — Tone output ID 200 to 1000 Hz, fixed level — — Precision - 600 ΩZout 200 to 9999 Hz, -20 to +1 dBm 1 Hz, 0.1 dB 1% Hz, 0.2 dB 10 k to 19.99 kHz, -20 to +1 dBm 1 Hz, 0.1 dB 2% Hz, 1 dB Wideband - 135 ΩZout 20 k to 1200 kHz, 0 dBm 1 kHz 1 dB

Dial mode DTMF, Pulse — —

TDR

Under typical conditions a 100, 200, 500, 1,000, 2,000 1 ft. (1 m) 0.6% range

500 ft bridge tap can be seen 5,000, 10,000, 20,000, 30,000 ft, at 18,000 ft on a 20,000 ft (30, 60, 150, 300, 600, 1,500 24 AWG cable. (150 m bridge 3,000, 6,000, 10,000 m) tap at 5500 m on a 6000 m

0.5 mm cable).

Pulse width 5 nS, 34 nS, 235 nS, 1600 nS — Fixed values

Velocity input 0.50 to 0.99 (150 to 299 m/µs) 0.01 (1 m/µs) —

Modes Single trace, dual trace, — —

differential, memory, crosstalk, peak

Auto tests Same specifications as full tests See above See above

SA Functions (ISDN/IDSL, HDSL, ADSL)

ISDN (2B1Q)

Link test Active/inactive — —

Error test (US & Canada only) Near-end & far-end block errors 1 block error 1 block error DSL

Loss (& frequency) -75 to +5 dBm, 20 kHz to 1200 kHz 1 dB 1 dB

With 100 Ωor 135 ΩZin Noise (with E, F, & G filters)

Metallic with100 Ω/135 ΩZin +10/+20/+30 to +90 dBrn 1 dB 2 dB

Longitudinal with 10 kΩZin +40/+50/+60 to + 120 dBrn 1 dB 2 dB

Wideband Spectrum Analyzer

Range 10 kHz to 1.8 MHz — —

5 Spans from 120kHz to 2 MHz — —

Dynamic range -90 to +10 dBm — —

Frequency resolution 1% of span — —

Specifications for 3M

_Dynatel

_{Subscriber Loop Analyzer 965DSP (A, B & SA)}

Physical Specifications Environmental Specifications

Size H x W x D in. (cm) 10.3 x 4.7 x 3.2 (26.2 x 12 x 8.1) Operating temperature 0° to 140°F (-18 to 60°C) Net weight lbs. (kg) 4.3 (1.95) with battery Storage temperature -40° to 165°F (-40 to 75°C)

and soft case

Shipping weight lbs. (kg) 7.8 (3.54) Humidity 0 to 95%, non-condensing

Material GE Xenoy

Accessories Description

Test leads U.S. – 5 ft. (1.5 m) test leads with 2 mm gold-plated banana plugs on one end and chrome-plated alligator clips on other end (black/red, blue/yellow, green)

European - 5 ft. (1.5 m) test leads with 2 mm gold-plated banana plugs on one end and 4 mm gold-plated banana plugs on other end (black/red, blue/yellow, green)

RFL strap U.S. – 1.5 ft. (0.5 m) with alligator clips on ends European – 1.5 ft. (0.5 m) with banana plugs on ends

AC/DC battery charger 100-250 Vac (50/60 Hz) input; 12 Vdc (1 A) output. For charging only. Do not operate when using charger. Soft case Heavy-duty fabric case for unit and test leads

Battery holder Plastic holder for 6 AA (LR6) batteries Battery pack Custom 1.5 amp-hour nickel metal hydride

Toolbox Functions Range Resolution Accuracy

Load coil count 0 to 5 1 ±1

Ohms/distance 0 to 9999 ohms 0.01Ω —

calculator 0 to 99999 ft (0 to 30 km) 1 ft (0.1 m) —

Caller ID (U.S. & Canada only) Date, time, number, name — —

Carrier level -4 to -32 dBm 1 dBm 2 dBm

Self-calibrate Pass/fail — —

Loop resistance 0 to 99.9 Ω 0.01 Ω 0.1% ± 0.01 Ω

100 to 999.9 Ω 0.1 Ω 0.2% ± 0.01 Ω

1000 to 7000 Ω 1 Ω 1.0% ± 0.01 Ω

Resistance difference 0 to 99.99 Ω 0.01 Ω 1% of loop resistance ± 0.01Ω

Ground resistance 5 to 500 Ω 1 Ω 1% ± 1 Ω

K-Test

Loop resistance 0 to 7K Ω __ __

Fault ratio (Fault Res1) > twice (Fault Res2) __ __

Resistance to fault 0 to 99 Ω 0.01 Ω 5%

(no noise) 100 to 999 Ω 0.1 Ω 5%

1K Ωto 3.5K Ω 1 Ω 5%

Stored results 100 results of each, minimum — —

(Autotest and TDR)

Ringers 0.0 to 4.0 0.1 ringer equivalent General Specifications

General Specifications

Ruggedness Survives 5 ft. (1.5 m) drop in soft case

Water-resistance Splashproof; may be used in light to moderate rain

Standards Meets FCC part 15, class A: Digital Devices for the US, and EN55022 (radiated emissions), EN55024-2 (electrostatic discharge), EN55024-3 (radiated immunity) EN55024-4 (transient immunity) and IEC1010 (product safety) for Europe. Built to ISO9001 certification for manufacturing facilities. Built to Bellcore (Telcordia Technologies) TSY000078 manufacturing methods.

Meets UL50 Rain Test.

Language English and multi-languages

Units Feet or meters, Fahrenheit or Celsius, dBrnC or dBm0p, m/uS or Vp Battery life Rechargeable battery pack, 12 hours typical usage (no backlight),

Specifications for 3M

_Dynatel

_{Subscriber Loop Analyzer 965DSP Series with ADSL Modem}

Physical Specifications

Size H x W x D in. (cm) 10.3 x 4.6 x 3.75 (26.2 x 11.7 x 9.5) Net weight lbs. (kg) with soft case and test leads 4.5 (2)

Shipping weight lbs. (kg) 8 (3.6)

Environmental Specifications

Operating temperature 0˚ to 140˚ F (-18˚ to 60˚ C)

Storage temperature -40˚ to 165˚ F (-40˚ to 75˚ C)

Humidity 0 to 95%, non-condensing

Vibration Random 3-axis vibration for 20 minutes

Water Resistance Meets UL50 Rain Test

Shock 10 drops on corners and sides from 30 in. (without soft case)

and 10 drops on corners and sides from 60 in. (with soft case)

Safety IEC950

Operational Specifications

Product will incorporate all the features of the 965DSP and/or 965DSP/SA Subscriber Loop Analyzers at the accuracy currently specified for these products (see 965DSP family product documentation). ADSL Datalink capability is limited to link synchronization. No ‘PING’ or data application capability is provided. Modem will initiate a connection with the far-end under operator command. Status messages indicating link progress will be returned.

ANSI/ITU Standards Supported ITU G.992.2 (G.Lite), ITU G.992.1 (G.DMT), ANSI T1.413 Issue 2

ADSL Modes ANSI, G.DMT, G.Lite, MultiMode

Reach Designed to synchronize at distances from 0 ft. to 18,000 ft.

Statistics Actual and maximum upstream and downstream connect rates

Upstream and downstream percent used ADSL line capacity Upstream and downstream noise margin

Upstream and downstream signal attenuation Upstream and downstream power levels

Modem manufacturer identification (ANSI mode only) Upstream and downstream FEC, CRC, and HEC counts Alarm codes including LOS, LOF, LCD and LOM Graphical display of bits-per-bin count for the DMT signal

Operating Modes Captured – Modem auto-disconnects from the far-end after statistics gathered Continuous – Modem gathers statistics for up to ten minutes

Specifications for the 3M

_Dynatel

_{Subscriber Loop Tester 945DSP}

Measurement Function Range Resolution Accuracy ±

Size H X W X D in. (cm) 7.5 x 4 x 1.5 (19 x 10.2 x 3.8) Cord length ft. (m) 5 (1.5) Net weight lbs. (kg) 1 (.5) Shipping weight lbs. (kg) 1.5 (0.7) Operating temperature -30° to 140° F (-34° to 60° C) Storage temperature -40° to 140° F (-40° to 60° C) Relative humidity 0 to 95% Display in. (cm) 2.25 x 1.25 (5.7 x 3.2) AC voltage 0 to 75 V 1.0 V ±1 V 75 to 250 V 1.0 V ±3 V DC voltage 0 to ±100 V 1.0 V ±1 V ±100 to ±350 V 1.0 V ±3 V DC current 0 to ±110 mA 1.0 mA ±2 mA Resistance 0 to 999Ω 1Ω ±5 Ωor 3% 1KΩto 9.9KΩ 100Ω ±3% 10KΩto 999KΩ 1 KΩ ±3% 1MΩto 9.9MΩ 100KΩ ±3% 10MΩto 30MΩ 1 MΩ ±10% Noise metallic

(with C-message weighting**) 0 to 60 dBrnc 1 dB ±2 dB

Noise to ground

(with C-message weighting**) 40 to 100 dBrnc 1 dB ±2 dB

Opens 0-9999 ft. 1 ft. ±20 ft., ±5%

10K to 20K ft. 1K ft. ±5%

0 to 6000 m 1 m ±6 m, ±5%

Ground Resistance 0 – 50 Ohm 1Ω ±3 Ω

Loop Loss -50 to +10 dBm 1 dB ±1 dB

Frequency during loss,

single frequency only 200 to 5,000 Hz 1 Hz ±3 Hz

Longitudinal Balance 0 to 65 dB 1 dB ±2 dB

Tone Output

ID 577.5 Hz

Precision - 600 ΩZout 404,1004,2804Hz 0 ±.5 dBm

Power Source 4 - Disposable Alkaline (AA or LR6) but will accept user provided Ni-Cad or NiMH batteries with user provided external charger

Typical battery life Alkalines: 40 hours of typical use, 15 hours continuous Over voltage protection 450 Vdc, 250 Vac. Between any leads to protect the internal circuit.

Vibration Random 3-axis vibration at 12.5Grms for 20 minutes

Rain proof/splash proof Meets UL50, rain test

Shock 10 drops on corners and sides from 30 in. without the soft case and 10 drops from 60 in. in soft case

EMI/EMC Meets FCC part 15, Class A: Digital Devices for the US, and EN55022 (radiated emissions), EN55024-2 (electrostatic discharge), EN55024-3 (radiated immunity),

EN55024-4 (transient immunity) and IEC1010 (product safety) for Europe.

Keypad ON/OFF switch, numeric key pads, which also function as the function keys.

Function keys V (voltage), mA (loop current/ground resistance), Ω(resistance/soak test), OPENS, TONE, DB, AUTO Cal. Two non-testing function keys are ‘*’ and ‘#’. ** Psophometric filter is available as a special order.

With the 3M Dynatel Cable Length

Meter/Time Domain Reflectometer

940CLM/TDR, technicians of all skill

levels can perform a variety of

time-saving tasks when installing or

maintaining metallic cable. This

lightweight, hand-held tester:

• identifies most “clear-opens” or

“dead-shorts” and displays the

distance to the event in seconds

• instantly measures and displays cable

length in feet or meters

• continually measures voltage to

identify live circuits

• transmits four different tone

frequencies and patterns to trace

hidden cables or identify cable pairs

• includes selectable automatic

power-down options (5, 15, 30 minutes or

continuous)

The versatile, compact Dynatel

940CLM/TDR provides installation

and repair technicians one simple

device that meets several key needs.

They can use it to detect faults up to a

distance of 2500 feet (750 meters);

determine the length of cable, whether

in a box, on a spool or behind a wall;

measure and display voltages

of up to 250 volts rms; and transmit

any of four tone frequencies to trace

hidden cable in walls and ceilings.

The 940CLM/TDR includes a

convenient, built-in library of over 60

cable types. The technician selects the

type of cable to test, attaches the test

leads and receives a reading of cable

length or distance to an open or short.

Compatible with all common cables, it

features standard banana jack

connectors that accommodate a variety

of leads or connectors.

The 940CLM/TDR can save

valuable installation time by enabling

technicians to determine how much

cable they have to work with — and to

detect shorts or opens in it — before

work begins, instead of taking the risk

that they may have to start over after

wiring is well underway. When used

with the 3M

_Dynatel

_Subscriber

Loop Tester 945DSP, repair

technicians can use the 940CLM/TDR

to pinpoint a fault location. Both the

Dynatel Subscriber Loop Tester

945DSP and the Dynatel Cable Length

Meter/Time Domain Reflectometer

940CLM/TDR are part of 3M’s

complete family of industry-leading

testing solutions for telco, CATV and

electrical installations.

3M

™

Dynatel

™

Cable Length Meter/

Time Domain Reflectometer

940CLM/TDR

3M

_Dynatel

_{Cable Length Meter/Time Domain Reflectometer 940CLM/TDR Specifications}

Physical Specifications

Size H x W x D in. (cm) 7.0 x 3.2 x 1.4 (17.8 x 8.1 x 3.6) Net weight (including batteries) 8.7 oz. (247 g)

Environmental Specifications

Operating temperature 32˚ to 122˚ F (0˚ to 50˚ C) Storage temperature 14˚ to 131˚ F (-10˚ to 55˚ C)

General Specifications

Power 4 AA alkaline batteries

Battery Life Up to 12 hours continuous depending on temperature

Display Graphical 122 x 32 pixels

Length

Accuracy +/- 2% plus +/- 2 ft. (with correct NVP)

Resolution 1 ft. (0.2 m)

Maximum 2500 ft. (750 m)

Minimum 0 ft. (0 m)

Voltage (True rms Responding)

Range 0–250V (AC or DC)

Accuracy +/- 3% plus 1 volt

Tracing Tones Frequencies 575Hz, 977Hz, 1.0KHz, 7.82KHz Number of patterns 4 Fault Location “Opens” Accuracy +/- 2% plus +/- 2 ft. Resolution 1 ft. (0.2 m) Maximum 2500 ft. (750 m) Minimum 0 ft. (0 m) “Shorts” (R < 85Ω) Accuracy +/- 2% plus +/- 2 ft. Resolution 1 ft. (0.2 m) Maximum 2500 ft. (750 m) Minimum 0 ft. (0 m)

3M Dynatel Cable Length Meter/Time Domain Reflectometer 940CLM/TDR

Ordering Information

Product Name UPC

Subscriber Loop Tester/Analyzer Accessories for 965DSP

Product Description Pkg. Min. UPC Order

051138-Cigarette lighter adapter accessory 1/cs. 1 each 57744 for Dynatel 965DSP (not pictured)

1. Alkaline battery holder for 965DSP 1/cs. 1 each 57685 2. 110/220 Vac adapter for 965DSP 1/cs. 1 each 58628 Soft case for 965DSP (not pictured) 1/cs. 1 each 57605 3. Nickel metal hydride battery pack 1/cs. 1 each 57686

for 965DSP

Black/red test lead, alligator, bed of 1/cs. 1 each 57648 nails for 965DSP (not pictured)

Black/red test lead, banana plugs for 1/cs. 1 each 57608 965DSP(not pictured)

Blue/yellow test lead, alligator, bed 1/cs. 1 each 57649 of nails for 965DSP (not pictured)

Blue/yellow test lead, banana plugs 1/cs. 1 each 57610 for 965DSP (not pictured)

4. Shorting Strap, alligator 1/cs. 1 each 58529 Shorting Strap, banana (not pictured) 1/cs. 1 each 58532 Green test lead, alligator, bed- 1/cs. 1 each 57650 of-nails for 965DSP

Green test lead, banana plugs 1/cs. 1 each 57612 for 965DSP (not pictured)

5. Far end device for 965DSP 1/cs. 1 each 87639 6. IR Adapter Cable 1/cs. 1 each 58764

k 1. 356 2. 357 3. 358 4. 359 5. 360

3M

_Dynatel

_{Product Customer Training Information}

Product Description

Customer Training Seminars- Outside Plant Testing and Locating

3M Dynatel 965DSP Operation and Field Applications Workshop

Workshop Summary: A hands-on workshop that covers all of the features and applications of the latest hardware and software version

of the 965DSP. Each feature is covered button-by-button including all menus and sub-menus. Advanced features include wide-band testing with the FED II (far end device), the TDR (time domain reflectometer), the spectrum analyzer and the ADSL modem. Practical applications of each feature are covered by individual hands-on experience and by team exercises outdoors troubleshooting real OSP faults.

Target Attendee: Technicians and supervisors that are knowledgeable about testing and troubleshooting telephone outside plant cable,

splicing, cross-connects, pedestals and NIDS.

Length: 4-1/2 days Price: $750

Location: Austin Plant, 11705 Research Blvd., Austin, TX 78759 Scheduling: Call 1-800-426-8688 then 984-4112

3M Dynatel 22XXM Underground Utility Locating, Cable Fault Locating and Electronic Markers

Workshop Summary: A hands-on workshop that covers all of the features and applications of the latest hardware and software version

of the 22XXM Series underground utility locators, cable fault locators and electronic marker systems. Each feature is covered button-by-button. Practical experience is gained by outdoor exercises that are designed to reinforce the classroom theory.

Target Attendee: Suitable for technicians and supervisors working in the areas of telephone, CATV, electrical power, water, wastewater

and gas. No previous locating experience is required.

Length: 1-1/2 days Price: $150

Location: Austin Factory, 11705 Research Blvd., Austin, TX 78759 Scheduling: Call 1-800-426-8688 then 984-4112

Notes

Notes

Notes

Notes