b) Click “#2” button, the Analog Alarm Setting will be displayed as below.
c) Click “#3” button, the Digital Alarm Setting will be displayed as below.
10. Device Setup
It is used to modify the properties of each SMS Alarm Messenger, and the routine operation parameters.
a) Selecting the option or modifying the parameters
11. Alarm Setup
It is used to setup the alarm properties associated with alarm inputs and relay outputs. • 8 x alarm inputs • 2 x analog inputs • 3 x relay Outputs • Low Voltage Alert a) Selecting the option or modifying the parametersb) Click or button to activate the command.
To verify the setting:
First, clear the displayed settings by click [Clear] button.
Then, click [#1], [#2] or [#3] button to read the parameter setting from the device.