• No results found

Thermal-stress analysis and gearbox testing of spur gear tooth with relief holes

N/A
N/A
Protected

Academic year: 2020

Share "Thermal-stress analysis and gearbox testing of spur gear tooth with relief holes"

Copied!
10
0
0

Loading.... (view fulltext now)

Full text

Figure

Fig.2 and an array of tooth is removed which shows a gear with single tooth as in Fig.3
Fig. 5  Gear Tooth in Ansys
Fig. 7  Gear Tooth with Plot lines
Fig. 10  Meshed Gear tooth showing heat flux area
+5

References

Related documents

The empirical approach usually adopted to esti- mate the labor earnings consequences of mismatches between occupation and field of study among graduates is based on binary

These mech- anisms vary with the types of bacterial taxa used as probiotics and the kind of experimental disease, and the known effects mainly include maintenance of

The significant growth in colonoscopies nationwide since 1995 suggests that colonoscopy is being used as a primary screening and surveillance tool [30], instead of iFOBTs as

Viele Daten weisen stark darauf hin, dass die anti-Hu spezifische Immunantwort in Patienten mit anti-Hu Reaktivität und SCLC nicht nur eine B-Zell- Antwort ist, sondern auch

NCS = Number of cattle slaughtered; NBS = Number of bulls slaughtered; NCOS = Number of cows slaughtered; NFR = Number of foetuses recovered; %COS = Percentage

The characteristics of the land in the flood area can be seen from the constituent material of the land which is in the form of material carried by the river and deposited

Considering that Δ tr G° values are negative (Figure 8 (a)) and that TΔS° mic values are higher than ΔH° mic values as shown in Figure 8 (b) and (c), it is possible to conclude that

Under Regulation 5 (1) (c) you are required to: Compile a Statement of purpose that consists of all matters listed in Schedule 1 of the Health Act 2007 (Care and Welfare of