Cost-effective cutting through thick and thin.

Cost-effective

cutting through

thick and thin.

TruLaser:

TruLaser:

Benefits at a glance.

Contents

Up to the challenge. 2 In the best hands. 4 Abundant choice. 6 TruLaser Series 1000 8 TruLaser Series 2000 12 TruLaser Series 3000 16 TruLaser Series 5000 20 TruLaser Series 7000 24 TruLaser Series 8000 28 Focused knowledge. 32 Everything under control. 36 Software:

Programmed for success. 38 TruServices:

Service like no other. 39

When you choose TRUMPF you choose the most expedient entry into the world of laser cutting. As the world market leader, TRUMPF provides everything from a single source: machine, laser, automation, software and services. Our comprehensive product range in the sheet metal processing chain is supported by a large international service network. Whatever your requirements, our innovative technology will provide you with the most cost-efficient solution. Our equipment is so easy to operate that even with no experience you will quickly be able to cut the highest quality parts and benefit from the great advantages of the laser beam: Complete freedom in cutting contours across an extremely wide range of material types and thicknesses.

1

The most cost-efficient solution for every requirement.

2

The most innovative laser cutting technology.

3

Easy to operate.

4

Wide choice of contours, sheet thicknesses and materials.

Up to the

challenge.

TruLaser Series 1000

Low cost, compact and operator-friendly machines. Its ability to fit in

the smallest spaces combined with low investment and operating costs and easy operation are convincing features of the TruLaser Series 1000.

TruLaser Series 2000

Advanced compact machines. These compact machines pack outstanding

performance into a minimum amount of space.

TruLaser Series 3000

Flexible standard machines. The flexibility and reliability of these genuine

all-around machines is exceptional.

TruLaser Series 5000

Productive machines. These powerhouses set high standards of productivity

and cost efficiency.

TruLaser Series 7000

High-performance machines. These machines stand for absolute top

performance regarding both productivity and accuracy.

TruLaser Series 8000

Flexible oversize format machines. Built to deliver the highest cost efficiency

and excellent part quality in the oversize range.

1

The most cost-efficient solution for every requirement.

2

The most innovative laser cutting technology.

3

Easy to operate.

4

Wide choice of contours, sheet thicknesses and materials.

5

Everything from a single source: machine, laser, automation, software.

Quality thrives in the right environment.

TRUMPF machines are renowned for their reliability and superb quality. That’s because our high quality standards are deeply embedded in our corporate culture and are rigorously applied on a worldwide basis. Thanks to our SYNCHRO production system, we are continuously optimizing our processes, products and services. TRUMPF produces all of its machines on synchro-nized, standardized flow lines – because optimum quality can only be achieved through reliable processes.

In the best

hands.

Sustainable thinking.

We aim to run a cost-efficient and responsible business which makes efficient use of resources. For example, the tiny nozzle diameters of our lasers keep gas consumption to a minimum. With the TruFlow, we offer you the world’s most efficient CO₂ laser. The universal cooling interface provides efficient machine cooling.

Setting standards.

TRUMPF consistently invests in research and development at a level well above the industry average. Our innovative products and functions constantly set new standards in the field of laser processing. One example of this is BrightLine fiber – the quality breakthrough in solid-state laser cutting.

Making technology simple.

We are driven by our desire to make high-tech laser cutting available to everyone. That’s why we focus on developing machines that are user-friendly and easy to operate. Installa-tion, maintenance and programming can be performed with-out much effort. Many innovations make your everyday work easier: as an alternative to the control panel, the MobileControl app gives you the possibility of monitoring and controlling your machine.

Best choice based on experience.

Our expertise in lasers is based on four decades of experience and the installation of more than 60,000 lasers worldwide. For each laser cutting machine, we carefully select the most suitable option among our eight different types of lasers. As the technology leader, we provide you with neutral, results-oriented advice to help you find the optimum and most cost-effective solution for your particular field of application.

Abundant

choice.

TruLaser

Series 1000

Low cost, compact and operator-friendly machines.

These compact machines offer extremely low investment and operating costs combined with the ultimate in user-friendly operation. The dialog-based operating concept makes it quick and easy to find the function you need. It takes just a few hours to install a machine, so you will be cutting your first parts before you know it.

1

Low investment and operating costs.

2

Very easy to operate.

3

Small footprint of only 25 m².

4

Quick and easy installation.

5

Affordable entry into laser welding.

Low shipping and space costs.

Shipping is easy and therefore inexpensive. With their com-pact footprint, the machines of the TruLaser Series 1000 are delivered in just one standard container. Its footprint of just 25 m² also saves on space related costs.

Minimal setup and installation costs.

It takes just a few hours to get one of our machines up and running, reducing installation and setup costs. The machine’s low weight requires a floor thickness as low as 100 mm, and the machine does not need to be anchored to the floor, so no drilling is required.

Laser cutting for less.

Simple to operate.

The operating concept allows you to choose between begin-ner and advanced level. With the beginbegin-ner level, only the keys needed for fast part cutting are visible. The machines of the TruLaser Series 1000 ensure operation is safe even if you have never used a laser machine before. At the advanced level, you can easily adjust all the technological settings yourself.

Low training costs.

The intuitive operating system in the TruLaser Series 1000 is quick and easy to learn – so you can keep training costs to a minimum.

TruLaser

Series 1000

Laser data

TruCoax 2500 TruDisk 2001 TruDisk 3001

Max. power 2500 W 2000 W 3000 W Wavelength 10.6 μm 1.03 μm 1.03 μm Max. sheet thickness

Mild steel 16 mm 16 mm 20 mm Stainless steel 8 mm 8 mm 16 mm Aluminum 6 mm 6 mm 12 mm Copper – 3 mm 4 mm Brass – 3 mm 4 mm Power consumption Average power consumption

during production 26 kW 11 kW 13 kW

Subject to alteration. Only specifications in our offer and order confirmation are binding. Machine data

TruLaser 1030 TruLaser 1030 fiber

Working range X axis 3000 mm 3000 mm Y axis 1500 mm 1500 mm Z axis 75 mm 75 mm Workpiece Max. weight 720 kg 720 kg Max. speed

Simultaneous 85 m / min 85 m / min Accuracy[1]

Position deviation P_a 0.1 mm 0.1 mm Average position scatter Ps max 0.03 mm 0.03 mm

Dimensions and weight[2]

Length 7400 mm 7800 mm Width 2800 mm 2800 mm Height 2300 mm 2900 mm Weight 9730 kg 10400 kg Available lasers TruCoax 2500 TruDisk 2001 / 3001

[1] _{Position scatter information is given in reference to the entire working length. Positional accuracy is measured and approved according to VDI/DGQ 3441.}

[2] _{Approximate values (TruDisk not included): The exact figures can be obtained from the applicable installation plan.}

Advanced compact machines.

Our TruLaser Series 2000 machines offer maximum performance in a compact format. They can be automated to the degree you choose, giving you plenty of potential for growth in the future.

TruLaser

Series 2000

1

High productivity.

2

Flexible automation concept.

3

Easy to use.

4

Low space requirements.

5

TruDisk can be used in a laser network.

TruLaser

Series 2000

Compact powerhouse.

The TruLaser Series 2000 combines the benefits of a compact machine with the level of performance you would expect from a higher end machine. As with the TruLaser Series 1000, you benefit from simple operation, low space requirements, and fast and easy installation. In addition, the motion unit with gantry drives makes your TruLaser Series 2000 considerably more dynamic. Together with higher laser performance and optional automation, it opens up new opportunities for growth. The single-cutting-head strategy with collision protection keeps downtimes to a minimum.

The automatic nozzle changer means that you no longer have to switch cutting nozzles by hand. The machine does it for you in just a fraction of the time.

The robust TruDisk laser maximizes the productivity of your cutting processes, even for highly reflective non-ferrous metals.

Thanks to BrightLine fiber you will achieve top-quality results for every material and sheet thickness.

Machine data TruLaser 2030 fiber Working range X axis 3000 mm Y axis 1500 mm Z axis 75 mm Workpiece Max. weight 720 kg Max. speed Simultaneous 120 m / min Accuracy[1] Position deviation P_a 0.1 mm Average position scatter P_{s max} 0.03 mm Dimensions and weight[2]

Length 7800 mm Width 5900 mm Height 2900 mm Weight 11410 mm Available lasers TruDisk 3001 / 4001

[1] _{Position scatter information is given in reference to the entire working length. Positional accuracy is}

measured and approved according to VDI/DGQ 3441.

[2] _{Approximate values (TruDisk not included): The exact figures can be obtained from the applicable}

installation plan.

Subject to alteration. Only specifications in our offer and order confirmation are binding.

Laser data

TruDisk 3001 TruDisk 4001

Max. power 3000 W 4000 W Wavelength 1.03 μm 1.03 μm Max. sheet thickness

Mild steel 20 mm 20 / 25[3] _mm Stainless steel 16 mm 20 mm Aluminum 12 mm 16 / 20[3] _mm Copper 6 mm 8 mm Brass 6 mm 8 mm Power consumption

Average power consumption

during production 13 kW 15 kW

[3] _{With BrightLine fiber.}

Flexible standard machines.

These versatile laser cutting machines provide outstanding flexibility and reliability. The TruLaser Series 3000 is based on a remarkably simple operating and mainte-nance concept and offers numerous options to enhance its versatility. The use of a single cutting head for all sheet thicknesses eliminates the need to change cutting heads when you switch to a different type of sheet. And the adjustable control panel features convenient and intuitive touch operation to guide you through the program functions.

TruLaser

Series 3000

1

First-class processing flexibility.

2

High cutting speeds and minimal downtime.

3

Low and easy maintenance.

4

A high level of operator ergonomics.

5

Various automation options.

TruLaser 3030 fiber with BrightLine fiber: a new dimension.

The patented* BrightLine fiber function catapults your production to new heights: it enables the solid-state laser to cut even thick mild steel in outstanding quality. In addition to the huge variety of materials and sheet thicknesses that can be pro-cessed, you benefit from more stable processes, tiny contours, and the supremely easy removal of finished parts.

* Patent numbers US8781269B2, KR101456768B1.

Easy to operate and endlessly versatile.

These machines are designed to be easy to operate and maintain. The components are clearly marked and easily accessible. This makes maintenance even easier, so you can get the machine running again even faster. The machines also offer the ability to incorporate many additional functions, helping you to respond with flexibility to changing needs and minimize unproductive time.

The technology package for lens and nozzle automation greatly simplifies lens and nozzle operation.

You can cut tubes on your CO₂ and solid-state

laser cutting systems using the RotoLas, an aux-iliary device.

The TruLaser 3060 fiber automatically processes multiple consecutive sheets on a single pallet.

TruLaser

Series 3000

Laser data

TruFlow

3200 TruFlow 4000 TruFlow 5000 TruFlow 6000 TruDisk 3001 TruDisk 4001 TruDisk 6001

Max. power 3200 W 4000 W 5000 W 6000 W 3000 W 4000 W 6000 W Wavelength 10.6 μm 10.6 μm 10.6 μm 10.6 μm 1.03 μm 1.03 μm 1.03 μm Max. sheet thickness

Mild steel 20 mm 20 mm 25 mm 25 mm 20 mm 20 / 25[5] _{mm 25 mm} Stainless steel 12 mm 15 mm 20 mm 25 mm 15 mm 20 mm 20 / 25[5] _mm Aluminum 8 mm 10 mm 12 mm 15 mm 15 mm 20 mm 20 / 25[5] _mm Copper – – – – 6 mm 8 mm 10 mm Brass – – – – 6 mm 8 mm 10 mm Power consumption

Average power consumption

during production 29 kW 31 kW 35 kW 38 kW 13 kW 15 kW 18 kW

[5] _{With BrightLine fiber.}

Subject to alteration. Only specifications in our offer and order confirmation are binding. Machine data

TruLaser 3030 TruLaser 3040 TruLaser 3030 _{Lean Edition} TruLaser 3030 _fiber TruLaser 3040 _fiber TruLaser 3060 _fiber

Working range X axis 3000 mm 4000 mm 3000 mm 3000 mm 4000 mm 6000 mm Y axis 1500 mm 2000 mm 1500 mm 1500 mm 2000 mm 2500 mm Z axis 115 mm 115 mm 115 mm 115 mm 115 mm 115 mm Workpiece Max. weight 900 kg 1700 kg 900 kg 900 kg 1700 kg 3000 kg Max. speed

Simultaneous 140 m / min 140 m / min 140 m / min 140 m / min 140 m / min 140 m / min Accuracy[1]

Position deviation P_a 0.05 mm 0.05 mm 0.05 mm 0.05 mm 0.05 mm 0.05 mm Average position scatter P_{s max} 0.03 mm 0.03 mm 0.03 mm 0.03 mm 0.03 mm 0.03 mm Dimensions and weight[2]

Length 9300 / 6000[3] _{mm 12000 mm 6300 mm 8800 mm 11400 mm 15700 mm}

Width 4700 / 7600[3] _{mm 5300 mm 5600}[4] _{/ 7200 mm 6010 mm 6730 mm 6800 mm}

Height 2200 / 2200[3] _{mm 2200 mm 2200 mm 2400 mm 2400 mm 2280 mm}

Weight 12000 kg 13000 kg 12000 kg 12000 kg 12240 kg 13500 kg

Available lasers 3200 / 4000 / TruFlow 5000 / 6000 TruFlow 3200 / 4000 / 5000 / 6000 TruFlow 3200 / 4000 TruDisk 3001 / 4001 / 6001 TruDisk 3001 / 4001 / 6001 TruDisk 3001 / 4001 / 6001

[1] _{Position scatter information is given in reference to the entire working length. Positional accuracy is measured and approved according to VDI/DGQ 3441.}

[2] _{Approximate values. The exact figures can be obtained from the applicable installation plan.}

[3] _{Applicable when the pallet changer is in the transverse position.}

[4] _{Width during processing with pallet guides-folded in.}

Productive machines.

These powerhouses set high standards of productivity and cost efficiency. All thanks to dynamic drives, innovative cutting methods, and a high degree of automation. BrightLine and BrightLine fiber guarantee maximum part quality for all sheet thick-nesses within the fields of CO₂ and solid-state laser technology. Thanks to its innova-tive cooling concept, the CO₂ laser is the best of its class when it comes to efficiency.

TruLaser

Series 5000

1

Maximum productivity across the entire parts spectrum.

2

Excellent part quality in all sheet thicknesses.

3

Maximum process reliability in fully automatic operation.

4

Highest energy efficiency.

5

High axis speed and positioning dynamics.

Genuine powerhouses.

These productive machines can handle both thick and thin sheets with no problem at all. Equipped with our TruDisk 8001 and highly dynamic drives, you can be confident of achieving reliable and highly productive processes for the full range of sheet thicknesses. With a laser power of up to 8,000 W, this solid-state laser even cuts stainless steel up to 40 mm thick. Designed for maximum capacity utilization, the machines reach axis speeds of 300 m/min. A wide variety of automation solutions and smart functions guarantee reliable processes in automatic mode.

Innovative cutting methods.

Thanks to BrightLine fiber, you achieve top-quality cutting results across the entire spectrum of materials and sheet thicknesses. CoolLine allows you to cut grades and geomet-ries of thick mild steel that were previously impossible.

Unbeatable efficiency.

The TruFlow owes the best energy balance in the world to an innovative high-temperature cooling system. Power consumption can thus be reduced by up to 30%.

TruLaser

Series 5000

Machine data

TruLaser 5030 TruLaser 5040 TruLaser 5060 TruLaser 5030 _fiber TruLaser 5040 _fiber

Working range X axis 3000 mm 4000 mm 6000 mm 3000 mm 4000 mm Y axis 1500 mm 2000 mm 2000 mm 1500 mm 2000 mm Z axis 115 mm 115 mm 115 mm 115 mm 115 mm Workpiece Max. weight 1800 kg[3] _{3200 kg}[3] _{4800 kg}[3] _{900 kg 1700 kg} Max. speed

Simultaneous 300 m / min 300 m / min 300 m / min 265 m / min 245 m / min Accuracy[1]

Position deviation P_a 0.05 mm 0.05 mm 0.05 mm 0.05 mm 0.05 mm Average position scatter P_{s max} 0.03 mm 0.03 mm 0.03 mm 0.03 mm 0.03 mm Dimensions and weight[2]

Length 9950 mm 12510 mm 16930 mm 8800 mm 11400 mm Width 4600 mm 5400 mm 5420 mm 4800 mm 5430 mm Height 2400 mm 2400 mm 2500 mm 2400 mm 2400 mm Weight 12000 kg 14000 kg 17000 kg 12000 kg 13000 kg Available lasers TruFlow 6000 TruFlow 6000 TruFlow 6000 3001 / 4001 / TruDisk

6001 / 8001

TruDisk 3001 / 4001 /

6001 / 8001

[1] _{Position scatter information is given in reference to the entire working length. Positional accuracy is measured and approved according to VDI/DGQ 3441.}

[2] _{Approximate values. The exact figures can be obtained from the applicable installation plan.}

[3] _{This information applies to one pallet. The maximum weight for two pallets is not represented here.}

Subject to alteration. Only specifications in our offer and order confirmation are binding.

Laser data

TruFlow 6000 TruDisk 3001 TruDisk 4001 TruDisk 6001 TruDisk 8001

Max. power 6000 W 3000 W 4000 W 6000 W 8000 W Wavelength 10.6 μm 1.03 μm 1.03 μm 1.03 μm 1.03 μm Max. sheet thickness

Mild steel 25 mm 20 mm 20 / 25[4] _{mm 25 mm 25 mm} Stainless steel 25 mm 15 mm 20 mm 20 / 25[4] _{mm 20 / 40}[4] _mm Aluminum 15 mm 15 mm 20 mm 20 / 25[4] _{mm 20 / 25}[4] _mm Copper – 6 mm 8 mm 10 mm 10 mm Brass – 6 mm 8 mm 10 mm 10 mm Power consumption

Average power consumption

during production 32 kW 13 kW 15 kW 18 kW 20 kW

[4] _{With BrightLine fiber.}

High-performance machines.

The TruLaser Series 7000 stands for absolute top performance when it comes to productivity and accuracy. The machine’s extremely rigid construction, linear direct drives, and high-resolution measurement systems ensure precision combined with maximum dynamics – both today and for many years to come. The dual-head tech-nology deploys its full capabilities when processing medium and high sheet thick-nesses, effortlessly halving cutting times.

TruLaser

Series 7000

1

Maximum productivity with second cutting head.

2

Highest dynamics thanks to linear drives on all axes.

3

Absolute precision through high-resolution measurement systems in all axes.

Unrivalled productivity.

With their high acceleration and axis speeds, these machines produce truly astonishing results. Compared with a single-head machine, you increase your throughput by 70–80%. The TruLaser Series 7000 combines the high productivity of its linear drive technology with a unique laser concept. You can decide whether you want to produce parts with one or two cutting heads. The machine splits the beam of the TruDisk laser into two for dual-head operation or uses the whole beam for single-head operation. The two cutting heads on the CO² machine each have their own TruFlow laser and can each be taken offline separately as required.

Twice the productivity with two cutting heads.

Unrivalled precision.

High-resolution, direct measuring systems in all axes, combined with precise laser control, ensure excellent accuracy. As a result, this machine is perfect for cutting detailed parts, such as electrical panels.

TruLaser

Series 7000

Machine data

TruLaser 7040 TruLaser 7025 _fiber TruLaser 7040 _fiber

Working range X axis 2500 mm 2500 mm 2500 mm Y axis 4000 mm 1250 mm 4000 mm Z axis 105 mm 105 mm 105 mm Workpiece Max. weight 2000 kg 500 kg 1600 kg Max. speed

Simultaneous 304 m / min 304 m / min 304 m / min Accuracy[1]

Position deviation P_a 0.03 mm 0.03 mm 0.03 mm Average position scatter P_{s max} 0.02 mm 0.02 mm 0.02 mm Dimensions and weight[2]

Length 15800 mm 11900 mm 16800 mm Width 7280 mm 7700 mm 8100 mm Height 3090 mm 3500 mm 3500 mm Weight 16500 kg 10400 kg 15000 kg Available lasers _{3200 / 4000 / 6000}TruFlow TruDisk 6001 TruDisk 6001

[1] _{Position scatter information is given in reference to the entire working length. Positional accuracy is measured and approved according to VDI/DGQ 3441.}

[2] _{Approximate values. The exact figures can be obtained from the applicable installation plan.}

Subject to alteration. Only specifications in our offer and order confirmation are binding.

Laser data

2x TruFlow 3200 2x TruFlow 4000 2x TruFlow 6000 TruDisk 6001

Max. power 2 x 3200 W 2 x 4000 W 2 x 6000 W 6000 W Wavelength 10.6 μm 10.6 μm 10.6 μm 1.03 μm Max. sheet thickness

Mild steel 20 mm 20 mm 25 mm 20 mm Stainless steel 12 mm 15 mm 25 mm 20 mm Aluminum 8 mm 10 mm 15 mm 20 mm Copper – – – 6 mm Brass – – – 6 mm Power consumption Average power consumption

during production 54 kW 56 kW 66 kW 27 kW

Flexible oversize format machines.

These machines are built to offer maximum cost-efficiency when processing over-sized formats. Their unique extra pallet concept means they can process metal sheets up to 16 m in length while retaining the flexibility and productivity of a machine for standard formats. The metal sheet is moved through the machine in several steps, while intelligent processes ensure maximum part quality, even when the sheet is being repositioned.

TruLaser

Series 8000

1

Sheets up to 16 m in length.

2

Flexible choice of pallet system.

3

Smooth, seamless cutting of repositioned sheets.

4

Option of doubling productivity by adding a second cutting head.

2

1

The best solution if oversized formats account for up to

approx. 40% of your work:

For standard formats up to 4 m in length use the pallet changer (1) and automation for highest productivity. You can enhance flexibility with the additional pallet (2) for sheets up to 16 meters in length.

The best solution if oversized formats account for more than

approx. 40% of your work:

Achieve maximum productivity for oversized formats up to 12 m in length by loading and unloading while the machine is cut-ting. You can reduce cycle times to a minimum with the quick oversized pallet changer. This solution also enables cost-effi-cient unmanned production with maximum process reliability.

Powerful, reliable and productive.

The TruLaser Series 8000 demonstrates decisive advantages in oversized processing. With dynamic linear drives and proven TruFlow lasers you can be sure of achieving the highest cut quality. The patented solution for quick and precise pallet sequencing, combined with an intelligent monitoring and control system, guarantees reliable processes. As an option, you can double the productivity with a second cutting head.

Smart, controlled and precise.

Innovative processing strategies from TRUMPF provide the best quality assurance for your oversized format cutting. Con-trol of the internal material stresses produces cuts without offset steps – for sheets up to 16 m in length. High resolution, direct measurement systems in all axes ensure extremely accurate parts. With the precise laser control system you will be able to cut contours reliably in thick and thin sheets.

The most cost-efficient strategy for your pallet changers.

TruLaser

Series 8000

Machine data TruLaser 8000 Working range X axis 2500 mm Y axis 4000 mm Z axis 105 mm Oversized format options

With 4000 x 2500 mm pallet changer and

additional oversized format pallet 16000 / 14000 / 12000 / 10000 / 8000 / 6000 x 2500 mm

With oversized format pallet changer 12000 / 8000 / 6000 x 2500 mm Workpiece

Max. weight Depends on selected pallet system Max. speeds

Simultaneous 304 m / min Accuracy[1]

Position deviation P_a 0.05 mm Average position scatter Ps max 0.03 mm

Repeat accuracy of repositioning ± 0.1 mm

Position accuracy of repositioning ± 0.2 mm

Dimensions and weight Depends on selected pallet system

[1] _{Position scatter information is given in reference to the entire working length. Positional accuracy}

is measured and approved according to VDI/DGQ 3441.

Subject to alteration. Only specifications in our offer and order confirmation are binding.

Laser data

TruFlow 4000 TruFlow 6000

Max. power 4000 W 6000 W Wavelength 10.6 μm 10.6 μm Max. sheet thickness

Mild steel 20 mm 25 mm Stainless steel 15 mm 25 mm Aluminum 10 mm 15 mm Power consumption

Average power consumption

during production 31 kW 38 kW

With TRUMPF machines you know you have the right equipment to tackle whatever challenges you might face – and you can be confident of achieving the best possible results in sheet metal processing. TRUMPF machines incorporate highly intelligent pro-cesses that enable you to reduce the non-productive time typically spent on setting up and configuring the machine, keeping the results of the cutting process firmly under your control.

Even under the most difficult conditions, TRUMPF’s innovative Lines and Smart Functions ensure reliable and consistent manufac-turing, maximum cutting speeds, and outstanding cut quality.

Productivity, reliability and high quality – these clever features can help you improve your workflow. Productivity Process reliability Quality

AdjustLine

Adapting to material quality made easy.

AdjustLine makes it easier to process lower-quality material. The function adjusts cutting parameters to ensure process reliability when cutting parts.

DetectLine

Precise position recognition.

A camera system determines the position of inserted sheets with a high degree of precision, enabling the accurate reworking of parts that have already been cut. In addition, DetectLine automatically cuts a focus comb and with it adjusts the focal position.

CoolLine

Cut even thick mild steel intricately. The selective cooling of the workpiece during the cutting process allows for new geometries, more efficient sheet utilization and significantly increases process reliability in the processing of thick mild steel. This process is part of the single cutting head strategy.

BrightLine

Excellent through thick and thin. This special cutting system produces the highest quality cuts in thick stainless, mild steel and aluminum. The smoothness and squareness of the cut edge are far superior to a standard cut. No finishing work is required.

Focused

knowledge.

FlyLine

Pierce on the fly and process faster. The cutting head travels at high speed over the entire sheet line by line. The con-trol system cuts all the contour sections in the respective beam path. This reduces the time spent on traversing and positioning, especially when cutting perforated grids.

Dot Matrix Code

Marking parts fast and reliably. In just a few seconds, the laser in your flatbed machine applies a 2-dimensional code (data matrix) of dots to the part being processed. The code content is defined during the programming stage and contains information for the sheet metal processing chain. This considerably sim plifies pro-duction processes.

PierceLine

Everything under control when piercing.

PierceLine monitors and controls the piercing process. This reduces stress on the material and machine and shortens pierce time by up to 80%.

LensLine

Protection for lens and machine. LensLine switches off the beam as soon as there are critical impurities within the focusing lens. In doing so the lens is pre-vented from thermal decomposition, and the beam guidance stays clean. LensLine additionally offers a condition checking function which, thanks to the RFID lens, guarantees perfectly timed cleaning cycles.

Smart Collision Prevention

Safe without microjoints.

Smart collision prevention creates a pro-cessing strategy that applies across com-ponents. Parts at risk of tipping over are cut free only when there is no longer any risk of collision. This allows you to work reliably and safely, even without micro-joints.

Drop&Cut

Make your post-production processes simpler.

Drop&Cut will make your post-production and remainder sheet utilization easier, more intuitive, and more efficient than ever before. A camera projects the live image of the machine interior directly onto the user interface. Now you can use the mouse or touch con-trol to flexibly place geometries on the remainder sheet.

Single cutting head strategy

Save time by using a single cutting head that does not re-quire changing. This reduces non-productive time, especially when you are automatically processing a number of differ-ent materials.

Performance package fusion cut

Achieve a further qualitative leap in cutting quality with thin sheets, significant improvements in sheet throughput and thus even more cost-effective production with innovative nozzles and optimized cutting data.

Condition Guide

A sensor system shows, among other things, the state of the cutting components, recommends appropriate actions and thus enables optimal planning.

Focused

knowledge.

TruLaser

Series 1000 Series 2000TruLaser Series 3000TruLaser Series 5000TruLaser Series 7000TruLaser Series 8000TruLaser

AdjustLine BrightLine BrightLine fiber Condition Guide CoolLine DetectLine Dot Matrix Code Drop&Cut

Single cutting head strategy FlyLine

LensLine

Performance package fusion cut PierceLine

Smart Beam Control Smart Collision Prevention

Smart Beam Control

The intelligent beam monitoring auto-matically controls the focal position during the cutting process and keeps process reliability consistently high. It also enables remote diagnostics of the cutting system.

Outstanding results – without compromises.

The patented* BrightLine fiber option turns solid-state lasers into all-purpose tools: it enables you to achieve top-quality results for every sheet metal thickness. What’s more, the solid-state laser’s benefits for thin-sheet metal processing remain unchanged.

* Patent numbers US8781269B2, KR101456768B1.

BrightLine fiber

1. Higher quality

Process sheet metal with outstanding edge quality.

2. Enhanced flexibility

Expand the range of sheet thickness you can handle with the same laser power.

3. Maximum piercing quality

Thanks to BrightLine fiber and multi-stage piercing, there is no spatter even with the smallest of piercing holes.

4. Tiny contours

BrightLine fiber enables you to process even smaller contours than before. Small holes that formerly could only be drilled can now be cut by laser.

5. Higher process stability

BrightLine fiber provides all-round process stability, even with the most exacting cutting quality requirements.

6. Simple part removal

BrightLine fiber makes it easier to remove parts from the scrap skeleton. This saves valuable time when sorting parts. An even cutting surface and a wider kerf are responsible for this easier part removal.

Smart Nozzle Automation

Process reliability in fully automated operation.

Smart nozzle automation bundles clever features that provide process reliability in fully automated operation. In doing this, this smart function ensures, among other things, the autonomous changing of nozzles when necessary. The nozzle inspection reliably deter-mines whenever a change is necessary. Be it for CO2 or

solid-state laser technologies, smart nozzle automation always in-cludes the relevant functionalities.

Automated laser cutting.

Automated machines support your material flow and increase process reliability, ultimately boosting your productivity. Modular automation components from TRUMPF offer the best way to get your automation, storage and software solutions working in harmony. From automatic loading right through to fully automated production, we can provide you with the best solution to meet your specific needs.

Loading

Relief and improvement of work safety.

Storage and logistics systems: Optimal material flow and space usage with a permanent inventory overview. Loading and unloading

Noticeable increase in produc-tivity in uninterrupted operation.

Loading and unloading with part sorting

Full utilization of the machine’s productivity and optimal prepa-ration for subsequent processes.

Process linking

Overall planning and control of production with low overhead costs.

Automation function Loading Loading and unloading Loading and unloading / part sorting Auxiliary pallet mode Storage systems

LoadMaster LiftMaster _Shuttle LiftMaster _{Compact Linear Basic}LiftMaster _{LiftMaster Sort}LiftMaster / LiftMaster _Linear LiftMaster Store / LiftMaster

Store Linear SortMaster

PalletMaster Tower TruStore Possible machines: TruLaser Series 1000 TruLaser Series 2000 TruLaser Series 3000 TruLaser Series 5000 n

Everything

under control.

Automation function Loading Loading and unloading Loading and unloading / part sorting Auxiliary pallet mode Storage systems

LoadMaster LiftMaster_Shuttle LiftMaster _{Compact Linear Basic}LiftMaster _{LiftMaster Sort}LiftMaster / LiftMaster _Linear LiftMaster Store / LiftMaster

Store Linear SortMaster

PalletMaster Tower TruStore Possible machines: TruLaser Series 1000 TruLaser Series 2000 TruLaser Series 3000 TruLaser Series 5000 n TruLaser Series 7000 n

Whatever degree of automation you’re looking for, we’re confident you’ll find the right solution for your production process on our website and in our automation catalog. www.trumpf.info/8hy9bq

Automated production. Watch this video to learn more about how automation could benefit you.

www.trumpf.info/cdwkzn

Machine Tools / / / Power Tools

Laser Technology / / / Electronics

Everything under control

TRUMPF Automation

Programmed

for success.

Software:

TruTops Boost takes you faster than ever from the

geometry to the NC program.

TRUMPF’s TruTops Boost is the software solution for designing and programming laser, punching and bending machines that lets you in-crease your performance at the touch of a button. The software combines all order processing steps, from the geometry through to the completed NC program, in a single all-in-one solution. Its new op-erating philosophy guides you through the software in a simple, pro-cess-oriented manner while allowing you to keep an overview of your orders. Thanks to its numerous automated functions, the inno vative Boost technology also makes you unbeatably fast. With it, you become more profitable and boost your business!

With TruTops Boost you can expand into the world of production control easily with options from TruTops Fab yet without integration effort. This enables you to plan, monitor and control your complete production including your machines and automated equipment.

TruTops Boost: Benefits at a glance.

From geometry to NC program faster than ever before.

Everything monitored: Single software solution for all order processes. Everything under control: Intuitive user interface supports flexible working. Everything faster: Boost technology with productive automated functions. Innovative Boost technology + new operating philosophy =

Finance Bending Tools Punching Tools Software Spare Parts Pre-owned Machines Consulting Customer Training Product Enhancements Service Agreements Technical Service

Throughout the lifecycle of your machine.

The TRUMPF Group ranks among the world’s leading manufacturers of production technology and industrial lasers. Technical and efficient solutions for our customers have been our focus since 1923. As a leading technology supplier, TRUMPF is a one-stop shop for all of your technology needs: machines, automation, storage technology and services.

Regardless of the TRUMPF technology you use, you will always get the best service. Thanks to the award-winning spare parts logistics at TRUMPF, we guarantee the highest availability of spare parts and provide you with all the products in the short-est time. TruServices Finance offers you individual financing solutions quickly and without a lot of paperwork. Our service technicians are highly trained and always available when you

need them. A Service Agreement is the ideal way of ensuring the best usability of your machine. Should your requirements change, we have flexible upgrading options and technical in-novations that will make your machine even better. Our broad range of training courses with experienced trainers and hands- on practice will also give you a head start in understanding and operating your machine.

Service like

no other.

TRUMPF is certified according to ISO 9001:2008 (for additional information see www.trumpf.info/quality)

Id en t n o. 1 78 72 69 _2016 0 4_ F – C on te nt s ub je ct t o c ha ng e w it ho ut n ot ic e