ORGANIZED BY:
65
thANNIVERSARY OF HUTMEN S.A
TECHNOLOGIES – EQUIPMENT – MATERIALS - APPLICATIONS
WROCŁAW, MAY 28-30, 2012
HOTEL „WROCŁAW”
1. SCOPE OF THE CONFERENCE
The organizers of the conference would like to invite you to take part in the next international conference on non-ferrous metals working
The conference in 2012 is connected also to the commemoration of the 65th anniversary of HUTMEN S.A. company.
The main subject of the conference is exchange of information between experts from industry and from scientific and research centres in the scope of new materials, technologies and equipment used in processing of n-f metals and application of new metallic and composite materials.
The conference is intended to be a forum for exchange of experience, establishing of new commercial contacts and acquiring knowledge on the most modern achievements of Polish and foreign companies.
The conference will cover in its scope the following subjects: Technologies and equipment for :
- melting and casting,
- hot and cold plastic working, - thermal and chemical treatment, - powder metallurgy,
- production of protective and functional coatings. New metallic and composite materials.
New processes for development of microstructure and properties of products. Improvement of functionality of non-ferrous metals based products.
New assortments and applications. Secondary materials and recycling.
The organizers of the conference would like to invite you to take part in the next international conference on non-ferrous metals working
The conference in 2012 is connected also to the commemoration of the 65th anniversary of HUTMEN S.A. company.
The main subject of the conference is exchange of information between experts from industry and from scientific and research centres in the scope of new materials, technologies and equipment used in processing of n-f metals and application of new metallic and composite materials.
The conference is intended to be a forum for exchange of experience, establishing of new commercial contacts and acquiring knowledge on the most modern achievements of Polish and foreign companies.
The conference will cover in its scope the following subjects: Technologies and equipment for :
- melting and casting,
- hot and cold plastic working, - thermal and chemical treatment, - powder metallurgy,
- production of protective and functional coatings. New metallic and composite materials.
New processes for development of microstructure and properties of products. Improvement of functionality of non-ferrous metals based products.
New assortments and applications. Secondary materials and recycling.
Non-ferrous metals working / Scope of the conference 2
SCIENTIFIC COMMITTEE:
Chairman:
prof. Józef ZASADZIŃSKI - AGH University of Science and Technology, Cracow Vice Chairmans:
prof. Zbigniew ŚMIESZEK - IMN Gliwice
prof. Marek HETMAŃCZYK - Silesian University of Technology, Katowice Members:
prof. Zbigniew GRONOSTAJSKI - Wrocław University of Technology
prof. Wojciech LIBURA - AGH University of Science and Technology, Cracow
prof. Bogusław MAJOR - Institute of Metallurgy and Materials Science of the Polish Academy of Sciences, Cracow prof. Mirosław MILLER - Wrocław Research Centre EIT+
prof. Jarosław MIZERA - Warsaw University of Technology
prof. Jan Walenty PILARCZYK - Czestochowa University of Technology prof. Jerzy SOBCZAK - Foundry Research Institute, Cracow
prof. Eugeniusz ŚWITOŃSKI - Silesian University of Technology, Gliwice Hanna WIŚNIEWSKA-WEINERT - Metal Forming Institute, Poznań
PROGRAMME COMMITTEE:
Chairman:
Jan ZIAJA - HUTMEN S.A., Wrocław Vice Chairmans:
Mieczysław WOCH - prof., IMN, Gliwice
prof. Tadeusz KNYCH - AGH University of Science and Technology, Cracow Members:
Ludwik CIURA - prof., IMN Gliwce Halina JĘDROSZ - HUTMEN S.A.
Krzysztof KALETA - Fabryka Przewodów Energetycznych “BĘDZIN” S.A. Andrzej KŁYSZEWSKI - prof., IMN, Light Metals Department in Skawina Jan SENDAL - Walcownia Metali Nieżelaznych “ŁABĘDY” S.A.
Jan WOŹNIAK - Walcownia Metali “DZIEDZICE” S.A.
Zygmunt WOŹNY - KGHM PM S.A. – Cedynia Copper Rolling Mill
prof. Paweł ZIĘBA - Institute of Metallurgy and Materials Science Polish Academy of Sciences, Cracow
3. GENERAL PROGRAMME OF THE CONFERENCE
MONDAY, MAY 28, 2012Registration starting from 11.00
13.00 Lunch
14.00 Conference opening:
prof.Z.Śmieszek - Director of IMN, President of SITMN J. Ziaja - President HUTMEN S.A.
J.Zb.Szymański - SITMN Honorary President - jubilee speeches 16.00 - 18.30 Conference session I 20.00 Gala dinner TUESDAY, MAY 29, 2012 from 8.00 Breakfast 9.00 - 11.00 Conference session II 11.00 - 11.30 Coffee break
11.30 - 13.00 Conference session III
13.00 Lunch 14.30 - 16.30 Conference session IV 16.30 - 17.00 Coffee break 17.00 - 18.30 Conference session V 20.00 Dinner WEDNESDAY, MAY 30, 2012 from 8.00 Breakfast 9.00 - 10.30 Conference session VI
11.00 - 13.15 Technical tour to HUTMEN S.A.
14.00 Lunch, departure
MONDAY, MAY 28, 2012
Registration starting from 11.00
13.00 Lunch
14.00 Conference opening:
prof.Z.Śmieszek - Director of IMN, President of SITMN J. Ziaja - President HUTMEN S.A.
J.Zb.Szymański - SITMN Honorary President - jubilee speeches 16.00 - 18.30 Conference session I 20.00 Gala dinner TUESDAY, MAY 29, 2012 from 8.00 Breakfast 9.00 - 11.00 Conference session II 11.00 - 11.30 Coffee break
11.30 - 13.00 Conference session III
13.00 Lunch 14.30 - 16.30 Conference session IV 16.30 - 17.00 Coffee break 17.00 - 18.30 Conference session V 20.00 Dinner WEDNESDAY, MAY 30, 2012 from 8.00 Breakfast 9.00 - 10.30 Conference session VI
11.00 - 13.15 Technical tour to HUTMEN S.A.
14.00 Lunch, departure
Non-ferrous metals working / General programme of the conference 4
Conference Venue:
Hotel „WROCŁAW”
Wrocław, ul. Powstańców Śląskich 7, Tel. (+48) 71/361 46 51; Faks. (+48)71/361 66 17 [email protected]; GPS :N 51° 5’ 57.12’’ E 17° 1’ 35.40’’
Conference Secretariat:
Maria Grzesik - SITMN
tel. 32/238-04-60, fax: 32/238-05-60 e-mail: [email protected]
Anna Królikowska - Instytut Metali Nieżelaznych tel. 32/238-04-55, fax: 32/238-03-50
e-mail: [email protected] Information on the conference is available on the website: www.imn.gliwice.pl Submission of papers:
Participants who wish to present a paper are invited to submit a 1 page (A4) abstract in English before March 15, 2011. Full text of a paper should be sent before May 1, 2012 . Papers will be included in the conference proceedings.
Language and presentation:
The official languages of the conference are Polish and English. Simultaneous translation will be provided. Audio-visual equipment will be available to the participants.
TERMS OF PAYMENT
The registration fee includes the full cost of accommodation, board and VAT. Please send the completed registration form before April 30, 2012.
Payment by bank wire transfer with a note: “Wroclaw + participant name” All banks charges are on Payer’s account
Account holder:
Stowarzyszenie Inżynierów i Techników Metali Nieżelaznych (SITMN): ul. Sowińskiego 5, 44-100 Gliwice, Poland VAT ID: PL9542496108 Account No: IBAN: PL 45 8457 0008 2002 0075 4873 0001 SWIFT: POLUPLPR
Bank Spółdzielczy w Gliwicach – Filia Łabędy Payment deadline: May 10, 2012
Refund policy:
If the registration is cancelled 30 days before the event the full conference fee will be refunded, 29 days and less before event – the fee is not refundable
5. REGISTRATION FORM
INTERNATIONAL CONFERENCE „NON-FERROUS METALS WORKING” WROCLAW, POLAND, MAY 28-30, 2012.
First name - surname:
Affiliation:
Address:
Tel., fax:
e-mail:
VAT ID:
We declare herein that the VAT ID and address given above, needed for issuing the VAT invoice, are correct. The registration fee includes the full cost of accommodation and board, conference proceedings and VAT.
PARTICIPATION COST:
676,50 EUR ( single room) x ... pereson
= ……….553,50 EUR (shared double room)
x ... pereson
= ……….430,50 EUR (without accommodation) x ... pereson
= ……….PRESENTING AUTHOR:
615 EUR (single room.)
x ... pereson
= ……….492 EUR (shared double room)
x ... pereson
= ……….369 EUR (without accommodation)
x ... pereson
= ……….TOTAL:
Technical tour to HUTMEN S.A. on May 30, 2012 yes/no
Date: Signature:
The filled form should be sent before April 30, 2012 to the Conference Secretary by e-mail or by fax: + 48 32
23 80 560 .
Title: Author(s):
Firma: Affiliation:
e-mail:
The filled form should be sent before March 15, 2012 to the Conference Secretary by e-mail or by fax: + 48 32 23 80 560.
Guidelines for authors:
The body of the paper should be in Polish or in English. The title, abstract, keywords, and figure and table captions, should be in Polish and in English. One printed copy of the paper (with attached tables and figures) together with its electronic version on CD or on other data storage medium should be delivered to the Conference Office by September 20, 2011.
Required structure of the paper:
• in the first line: first name and family name of the author(s), institution, country, e-mail address (using 10 point Times New Roman font, flush left, 1 line spacing),
• two line spacing,
• title (capitalised, 14 point Times New Roman bold, 1 line spacing, centred), • two line spacing,
• abstract in English/Polish containing not more than 150 words (10 point Times New Roman italic, 1 line spacing), • keywords (6 maximum) in Polish/English (10 point Times New Roman),
• the body of the paper (12 point Times New Roman), with tables and figures embedded within the text; please use 10 point Times New Roman for the equations,
• please note that the pages should not be numbered,
• references (10 point Times New Roman, 1 line spacing) listed as shown below:
[1] Kowalski J., Malinowski A.: Ceny węgla kamiennego. Polish J. Chem. 1990, 40, 2080-2085. [2] Nowak S.: Chemia nieorganiczna, WNT, Warszawa 1990.
The full text of the paper should not exceed 10 pages; margins: 2.5 cm
Photographs: required quality – 300 dpi minimum, detailed description attached (title, author, owner).
