Wireless Security System

• If legitimate user is forced to disarm the alarm, can enter distress code instead. • System simulates normal functioning (e.g. seems to disarm alarm) but sends

steer-to-hdvc-endpoint then permit tunnel pair-policy hdvc-endpoint-steer user@srx# set security policies from-zone untrust to-zone trust policy default-permit. match

When you enter your security code to arm the system, or press the "Stay" button on the keypad, and do not exit the premises through a designated Exit/Entry door, the system

Wireless keypad for the MICRA system, which allows you to arm / disarm the system and control devices connected to the module without having your own keyfob. This makes it an

• To disarm the system from Stay or Away Mode using a wireless keypad, just enter a User Code.. Wireless Keypad

• To disarm the system from Stay or Away Mode using a wireless keypad, just enter a User Code.. Wireless Keypad

When entering a night zone protected area the keypad, if programmed to do so, will emit an audible tone alerting the user to disarm the system with a valid user code.. If after

If this feature is enabled by installer, the LYNX Touch, when armed AWAY from the control’s keypad or a Wireless Keypad, automatically switches to the STAY mode if the Exit