International conference
Polymer composites 2010
April 27 – 28, 2010
Pilsen, Czech Republic
INVITATION AND PROGRAMME
European Union – European regional development Investing in Your Future
This conference is realized with the support of project „My jsme Evropa! My jsme Evropa! My jsme Evropa! –My jsme Evropa! ––– Perspektivy rozvoje Perspektivy rozvoje Perspektivy rozvoje Perspektivy rozvoje hospodářského prostoru
hospodářského prostoru hospodářského prostoru
hospodářského prostoru“ within sub-project „Kooperační podpora“.
NEW TECHNOLOGIES
NEW TECHNOLOGIES
NEW TECHNOLOGIES
NEW TECHNOLOGIES ---- RESEARCH CENTRE
RESEARCH CENTRE
RESEARCH CENTRE
RESEARCH CENTRE
UNIVERSITY OF WEST BOHEMIA
UNIVERSITY OF WEST BOHEMIA
UNIVERSITY OF WEST BOHEMIA
UNIVERSITY OF WEST BOHEMIA
SYNPO a.s.
SYNPO a.s.
SYNPO a.s.
SYNPO a.s.
SUB BRANCH MECHANICS OF COMPOSITE MATERIALS AND
SUB BRANCH MECHANICS OF COMPOSITE MATERIALS AND
SUB BRANCH MECHANICS OF COMPOSITE MATERIALS AND
SUB BRANCH MECHANICS OF COMPOSITE MATERIALS AND
SYSTEMS
SYSTEMS
SYSTEMS
SYSTEMS OF CZECH ME
OF CZECH ME
OF CZECH ME
OF CZECH MECH
CH
CHANICS
CH
ANICS
ANICS
ANICS SOCIETY PRAHA
SOCIETY PRAHA
SOCIETY PRAHA
SOCIETY PRAHA
CZECH TE
CZECH TE
CZECH TE
CZECH TEC
C
C
CHNOLOGY PLATFORM
HNOLOGY PLATFORM
HNOLOGY PLATFORM
HNOLOGY PLATFORM
---- AEROSPACE
AEROSPACE
AEROSPACE
AEROSPACE
ECONOMIC CHAMBER OF THE PILSEN REGION
ECONOMIC CHAMBER OF THE PILSEN REGION
ECONOMIC CHAMBER OF THE PILSEN REGION
ECONOMIC CHAMBER OF THE PILSEN REGION
under the auspices of president of the region of Pilsen
Doc. Mudr. Milada Emmerová, CSc.,
mayor of the City of Pilsen Ing. Pavel Rödl
and
rector of the University of West Bohemia Doc. Ing. Josefa Průša, CSc.
have the honour to invite you to
International conference
POLYMER COMPOSITES 2010
April 27 - 28, 2010
Pilsen, Czech Republic
ORGANIZATION AND PROGRAMME COMMITTEE:
Committee members:
Miroslav Hole
č
ek, NTC Z
Č
U Plze
ň
Petr Martinec, NTC Z
Č
U Plze
ň
Bronislav Foller, NTC Z
Č
U Plze
ň
Petra Pechmanová, NTC Z
Č
U Plze
ň
Eva Nezbedová, FCH, VUT Brno
František Socha, SYNPO, a.s., Pardubice
Martin Paloda, TC Inter-Informatics a.s., Praha
Josef K
ř
ena, Letov letecká výroba s.r.o, Praha
Jan Orlt, consultant – composites, Praha
Conference secretariat address:
Petra Pechmanová
New Technology - Research Centre
University of West Bohemia
Univerzitní 8, 306 14 Plze
ň
Telefon: +420 377 634 736
Fax: +420 377 634 702
E-mail:
http://
www.zcu.cz/ntc
The aim of the Conference is to enable specialists from research and
industry to present actual knowledge and trends in research and
development, analyses, materials, technology, manufacturing and
applications of composite materials.
CONFERENCE PROGRAMME
Tuesday, April 27, 20108.00 – 9.30 Registration, exhibition area set-up 9.30 Opening and welcome
PLENARY LECTURES
Chemical substances - amendments of REACH regulations and other Statutory Instruments in the EU and in the Czech Republic, in relation to occupational environment in particular.
MUDr. Miroslava Hornychová, CSc., National Institute of Public Health, Praha, Czech Republic
Filled polyolefines – up-to-date state and future
Assoc. Professor Eva Nezbedová, VUT Faculty of Chemistry, Brno, Czech Republic
11.15 – 11.30 C o f f e e b r e a k
11.30 – 13.00 Section ANALYSIS AND DESIGN
Chairmen: Josef Křena, Jaroslav Padovec
Determination of Reserve Factor for aircraft composite structures
Cabrnoch B., TC Inter-Informatics a.s., Praha, Czech Republic
Influence of the cross-section form on the cross-sectional parameters
Karall T., Austrian Research Institute for Chemistry and Technology (ofi), Vienna, Austria
Cylinder-flat bottom junction of vertical composite vessel loaded by hydrostatic pressure
Padovec J., Consulting, Strength of plastic and composite structures, Praha
13.00 – 14.00 L u n ch b r e a k
14.00 – 15.00 Section ANALYSIS AND DESIGN
Chairmen: Josef Křena, Jaroslav Padovec
Computation of selfinduced temperature fields of vibrating composite part
Pompe V., Aeronautical Research and Test Institute, Propeller dept., Praha, Czech Republic
Properties of composites with textile reinforcement computed from models and describes in 2D, 3D simulated pictures
15.00 – 17.00 Section TECHNOLOGY AND APPLICATION Chairmen: Bronislav Foller, Jan Orlt
Recycling of thermoset carbon fibre reinforced composites processed by thermal-oxidizing decomposition
Mašek Z., Aeronautical Research and Test Institute, Praha, Czech Republic
Structural bonding – an expensive way?
Mayer Ch., Mayer & Mayer GmbH, Graz, Austria
All-composite fuselage of small transport aircraft
Průcha P., Řehák M., LA composite, s.r.o., Praha, Czech Republic
Thermal analysis of composites based on MODAR matrix system
Foller B., New Technologies - Research Centre, University of West Bohemia, Czech Republic
17.30 Transfer to Pilsen Urquell - bus available
18.00 Excursion in Pilsen Urquell plant with English guide
Evening party in representative hall of Pilsen Urquell
Wednesday, April 28, 2010
9.00 – 11.20 Section MATERIALS, PROPERTIES, TESTING Chairman: Eva Nezbedová, František Socha
Rheological analysis of polymer systems
Paar A., Anton Paar GmbH, Graz, Austria
Latest improvements in thermal analysis & infrared spectroscopy to characterize composites
Pera S., PerkinElmer Italia SpA, Italy
Polyethylene composites reinforced with wood fibers:
effects of coupling agent, initiator and nanofiller on tensile and impact.
Kokta v., Gu R., University of Québec, Canada
Advanced toughness characterization of reinforced thermoplastic polymers using fracture mechanics approaches
Ralf Lach1,2, Beate Langer1, Wolfgang Grellmann1,2
1Polymer Service GmbH Merseburg, Germany
2Martin-Luther University Halle-Wittenberg, Centre of Engineering, Halle, Germany
Modification of epoxide resins for hand-lay-up technology by core-shell rubbers
Červinková M.1, Eder M.1, Blaha M.1, Čermák2, Matějka L.3
15M s.r.o. Kunovice, 2Tomas Bata University Zlin, 3Insitute of Macromolecular Chemistry
CAS, Praha
11.35 – 13.00 State-of-the-art and future of composites – workshop 13.00 – 14.00 L u n ch b r e a k
14.00 – 16.00 Section MATERIALS, PROPERTIES, TESTING
Chairman: Eva Nezbedová, František Socha
Study of internal damping in composites based on epoxy matrix
Kroisová D., Department of materials, TU Liberec, Czech Republic
Strength of slings made of fibre bundles
Růžička M.1, Kulíšek V.1, Turčič B.2, Blahouš K.3
1ČVUT FS, Institute of mechanics, biomechanics and mechanotronics Praha, 2Ing. Branko Turčič, Czech Republic
3Compo Tech PLUS spol. s r.o., Sušice, Czech Republic
An influence of surface modification of glass fibers on mechanical response of long-fiber-reinforced polymer composite
Bábik A.1, Janeček P.1, Lasota T.2, Burša J.2, Čech V.1
1Faculty of Chemistry, University of Technology, Brno, Czech Republic
2Institute of solid mechanics, mechatronics and biomechanics, University of Technology,
Brno, Czech Republic
Carbon fibres – carbon nanotubes
Grégr J., Košťáková E., Department of Chemistry, TU Liberec, Czech Republic
ORGANIZATION HINTS
Place and date
Plzeň Science and Technology Park, Teslova 3, Plzeň - Borská pole
April 27-28, 2010
Conference languages:
Czech and English. Simultaneous translation is provided.
Accommodation:
The accommodation will be reserved in Hotel Victoria (www.hotel-victoria.cz) Single room use/night: 38EUR, double room use/night 55 EUR (breakfast included)
Participation fees
The participation fee for a regular participant is 120 EUR The participation for lecturer/speaker is 60 EUR
The participation fee includes:
• Conference proceedings
• Drinks and lunch during breaks
• Simultaneous translation
• Excursion in Pilsen Urquell and Evening party
We ask you to pay the participant fee on the account number:
SWIFT address: KOMBCZPPXXX IBAN CZ0401000000004845500267 Bank Code: 0100
Detail of payment: 614002
Beneficiary: Zapadoceska univerzita v Plzni, Univerzitni 8, 306 14 Plzen, Czech Republic
Bank transfer to: Komercni banka, a. s. Na Prikope 33 /cp 969,
114 07 Praha 1, Czech Republic
In case of single or multiple-payment, it is necessary to put details of payment 614002 and your name in the payment order.
New Technology – Research Centre University of West Bohemia
Univerzitní 8 306 14 Plzeň
REGISTRATION CARD
International conference
POLYMER COMPOSITES 2010
April 27-28, 2010, Pilsen
Surname, first name of the participant:
...
Company: ...
...
Address (Zip-code/city/street no./country):...
...
...
...
E-mail: ...
Phone: ... Fax: ...
I order herewith accommodation in hotel Victoria
www.hotel-victorica.cz
:
26./27. April 2010 yes – no
27./28. April 2010 yes – no
... ...
Date Signature
© 2009 PerkinElmer, Inc. 400161_05. All trademarks or registered tradema
rks are the property of PerkinElmer, Inc. and/or its subsidiaries.
See what advanced solutions can do for you.
At PerkinElmer, we think about the needs of your lab today and tomorrow. Whether you’re performing QA/QC applications, studying processes in plastics or pharmaceuticals, or developing the cures of tomorrow, our com-
prehensive portfolio of molecular spectroscopy, thermal analysis and hyphenated techniques will enable you to see more than you ever thought possible. Optimize your laboratory’s potential. Let us show you how. www.perkinelmer.com/ftir
OPEn yOur EyEs
tO A wOrld
Of OPPOrtunIty In ft-Ir sPECtrOsCOPy