Bluetooth Portable Boombox
Owner’s GuideThank you for your purchase of the SHARKK Bluetooth 4.0 Box Speaker. Please take the time to read this manual carefully before you begin using your new device.
Box Content
Power Indicator
• Blue: device is turned on.
• Red: device is charging (will go dark when fully charged). • Flashing Blue and Red: indicates active Bluetooth pairing.
Power Button
• Press and hold to turn device on/off. You will hear a beep-like sound when powering on and the power indicator will turn blue. The light behind this button will turn green while speaker is in AUX mode.
Headphone Jack
• Press and hold M button to switch between headphone/AUX mode.
1
2
Getting Started
AUX in port• Here you can connect your speaker to external media devices.
Micro USB Jack
• This port cannot be used for external device connection, for charging use only.
M(ode) Button
• Use this button to toggle between Bluetooth/AUX modes.
• When using wired connection for multiple speakers, press and hold this button to synchronize sound.
Note: When playing music from a Bluetooth device, the Bluetooth mode is always given priority.
Prev/Next
Use this button to navigate between tracks when Bluetooth device is connected.
5
6
Play/Pause
• While in Bluetooth mode, press and hold to initiate Bluetooth pairing, then continue to use normally for playing and pausing.
V-/V+
• Adjusts volume. While in Bluetooth mode, a beeping sound will alert you when you have reached maximum volume.
Phone Button
• When connected via Bluetooth, press and hold to activate “Siri” or Android Voice.
• Press twice to redial.
• Incoming Call: press once to answer, press and hold to reject/end call.
8
9
Getting Started
NFC Area• Hold your device over this area to use NFC for Bluetooth connection.
MIC
• For best results, keep within 3 feet of the mic while speaking.
Charging
1. To charge your device, firmly connect the supplied adapter to the USB port on the side of the device.
2. Charging begins automatically regardless of whether the device is powered on/off.
3. The indicator light will show red while charging and will go dark once the charge is complete.
11
Bluetooth
1. To connect your speaker to a Bluetooth enabled device, hold your phone or other device within 3 feet of your speaker, press and hold the Play/Pause button for 3 seconds, and the system will then enter pairing mode and you should see the indicator light flashing blue and red.
2. Pairing mode will automatically be canceled (signaled by a beep) after 3 minutes. To reenter pairing mode, simply begin again at step #1.
3. Make sure that Bluetooth is enabled on the device you wish to pair with the speaker.
Getting Started
5. When selecting “SHARKK” from the list, you may be prompted to enter aPIN code (sometimes called a “Passkey”, “PIN Number” or “Password”), the code for this device is “0000”.
6. The speaker will record this device as the last device paired.
7. Finally, activate the Bluetooth connection from your phone or other device (some devices may do this automatically).
9. Incoming calls will override music and other media with an “incoming call” voice alert, simply press the Phone button to answer or press and hold to reject/ end the call. Press the Phone button to answer a second incoming call.
10. Press and hold the Phone button for three seconds to activate the “siri” or An-droid Voice function of your phone.
NFC
1. Begin by turning on the NFC function of the device you wish to connect to your speaker.
Getting Started
AUX3. Press the M button to switch to AUX mode. While in AUX mode, the green circular light behind the power button will remain on.
4. Two or more speakers can be connected via the supplied 3.5mm audio cable, to accomplish this simply insert one end of a second audio cable into the headphone port on speaker A and the other end of that cable in to the AUX of speaker B.
Features
1. Advanced CSR Brand Bluetooth Version 4.0.
2. Increased Bluetooth transmission rate and higher audio fidelity with de-creased power consumption.
3. Supports: NFC, Siri and Android Voice Calls. 4. Battery status shows on iPhone/ iPod / iPad.
Product Overview
Specifications1. Operation Voltage: 3.7 V 2. Charging Voltage: 5V 3. Output Power: 5Watts * 2
4. Speaker Spec.: 50mm 2 Ohms 5W 5. Frequency Response: 60Hz ~
20Khz
6. Lithium Battery Capacity: 2500mA
7. THD < 0.5% 8. SNR > 90dB
9. Dimensions: 60mm * 70mm * 190mm
Proper Use
1. Please charge your new device for a minimum of two hours before first use. 2. Note: a red indicator light will appear when the device is charging, and will
disappear when the device is fully charged.
3. To prevent damage and risk of electrical shock, do not expose this device to dust, vibration, rain, water or liquids of any kind.
Product Overview
5. Always place your device on level, flat and stable surfaces.6. Avoid placing items on top of your device.
7. Do not use excessive force when pressing buttons or handling your device. 8. To clean your device, use only a dry, soft cloth or minimally damp cloth
Safety
To prevent fires, shock or injury, please do not disassemble or replace any parts of this device. In the event that your device may be damaged or in need of repair, please contact a professional maintenance or qualified service center for assistance. We are not responsible for any personal injury or property damage caused by improper use of this product.
Support
Appendix
WarrantyYour new SHARKK Bluetooth 4.0 Speaker is covered by a Limited Manufactur-er’s Warranty. Details of the warranty are as follows: for a period of one (1) year from the date of retail purchase, SHARKK warrants that this product is free of any defects in manufacturing, materials and workmanship.
During the warranty period, we shall, at our sole discretion, repair or replace any defective parts within a reasonable period of time and free of charge.
FCC Compliant
