CCH Practice Management

Legal Notice

CCH Software has made every effort to ensure the accuracy and completeness of these Release Notes. However, CCH Software, its staff and agents will not be liable for any errors or omissions and use of the software is subject to the customer’s licence with CCH Software. These Release Notes should not be relied upon as a detailed specification of the system or the software.

CCH Software may make changes to this document from time to time. Copyright

© 2011 Wolters Kluwer (UK) Limited (trading as CCH Software)

These Release Notes may not be copied, altered, edited, disposed of or distributed without the prior consent of CCH Software. The content is confidential.

CCH Software 145 London Road, Kingston upon Thames, Surrey

KT2 6SR UNITED KINGDOM Trademark Rights

Microsoft, Windows, Windows NT, Windows for Workgroups, Windows 98, 2000, XP, MS-DOS, Windows Vista, Windows 7, Windows Server, Microsoft SQL Server, and Microsoft Office, are either registered trademarks or trademarks of Microsoft Corporation. Novell and NetWare are

trademarks of Novell Inc. Citrix MetaFrame is a registered trademark or trademarks of Citrix Systems, Inc., All rights reserved.

II

Contact Details

Website www.cch.co.uk/softwareproducts London

145 London Road

Kingston Upon Thames Telephone: 0844 56 18181 Surrey KT2 6SR Facsimile: 020 8547 2637

United Kingdom Email: [email protected]

Customer Care & Support Telephone: 0844 56 18181

Email: [email protected]

Website: www.cch.co.uk/softwaresupport

Dublin

Wolters Kluwer (Irl) Limited T/A CCH Software

First Floor, Unit 7 B Global House

Forest Park

Mullingar Co. Westmeath Telephone: +353 1 460 4729

Ireland Facsimile: +353 1 686 4786

III

Contents

Checks Prior to Install 6 

CCHPRACTICE MANAGEMENT V4.60HOTFIX RELEASE &INSTALLATION NOTES –JUNE 2012 1

Release Highlights

2 CCHPRACTICE MANAGEMENT V4.60HOTFIX RELEASE &INSTALLATION NOTES –JUNE 2012

Prerequisites

Hardware

If running Microsoft SQL Server 2000 or Microsoft SQL Server 2000 Desktop Engine (MSDE 2000) the Service Pack level must be SP4 or above (internal version number 8.00.2039 or above).

Software

CCH Practice Management v4.6.0 is required before applying this hotfix.

Microsoft SQL version 2000 Support

Sites running Microsoft SQL Server 2000 should contact CCH Customer Care & Support or their IT supplier to organise upgrading to a later version of Microsoft SQL Server. Practice Management v4.60 is the last release that will support SQL 2000, Practice Management 2012.3 (v4.70), expected in October 2012, will not be supported on SQL 2000.

CCHPRACTICE MANAGEMENT V4.60HOTFIX RELEASE &INSTALLATION NOTES –JUNE 2012 3

Quality Improvements

The following quality issue was resolved in CCH Practice Management v4.60 Hotfix:

ITS 49952: Standing orders: Auto-posting client bills no longer being posted after upgrade to v4.60

Previously, after upgrading to v4.60 of Practice Management any standing order bills set to Auto post were no longer being posted.

Users will need to manually post any standing order bills that were set to auto post but were not automatically posted.

ITS 50009: Splitting of CCH Central Task Permission: Employee Can Modify

After upgrading to v4.60 of Practice Management (and CCH Central v1.9.0), the employee tabs were again controlled by the CCH Central Permission ‘#Employee #Can Modify’ (bringing this back in line with earlier versions). A new Practice Management Task Permission ‘#Employee #Can Modify PM’ has been introduced to allow practices the ability to lock the CCH Central Employee Tabs while allowing access to the CCH Practice Management Employee Tabs.

By default the #Employee #Can Modify PM permission is not set to allow, Superusers will need to apply this permission against their various security groups where applicable.

4 CCHPRACTICE MANAGEMENT V4.60HOTFIX RELEASE &INSTALLATION NOTES –JUNE 2012

Installation

Prerequisites

This section of the document is intended for the use of IT Support Professionals who work for and/or on behalf of CCH Clients who are licensed users of CCH Products. It follows therefore that an understanding of files, folders, network shares and Windows shortcuts plus some experience of software installation is prerequisite knowledge.

For existing CCH Practice Management users, this guide is only valid if the current CCH Practice Management version is v4.60 (build 4.60.0.101).

If running Microsoft SQL Server 2000 or Microsoft SQL Server 2000 Desktop Engine (MSDE 2000) the Service Pack level must be SP4 or above (internal version number 8.00.2039 or above).

Note: This upgrade is not applicable to sites using Replication. All Replication sites should contact their Account Manager.

CCHPRACTICE MANAGEMENT V4.60HOTFIX RELEASE &INSTALLATION NOTES –JUNE 2012 5

Implementation Instructions

Overview

The following table provides a high-level summary of the installation steps:

Step Description Completed

1 Complete all of the Checks Prior to Install.

Ensure that a backup of the database has been completed successfully before proceeding to the second step of this guide.



Enterprise Manager and SQL Server Management Studio (SSMS) are available in

the KnowledgeBase on the CCH Support website.



3 Download the CCH_Practice_Management_v4_60_Hotfix.exe file.



For detailed instructions see the Installation section.



6 CCHPRACTICE MANAGEMENT V4.60HOTFIX RELEASE &INSTALLATION NOTES –JUNE 2012

Checks Prior to Install

Back Up Your Database

1. Back up the database.

The backup can be performed using the MSDE Backup & Restore Utility or Enterprise Manager or SQL Server Management Studio (SSMS) on the MSDE/SQL Central Server, depending on whether you are using MSDE or Microsoft SQL Server 2000

Standard/Enterprise or Microsoft SQL Server 2005 Workgroup/Standard/Enterprise. Please refer to the following Support Notes within the Knowledgebase option on the CCH Support website.

 Support Note 09: Performing an Ad hoc Backup using Backup Restore Utility  Support Note 12: Performing a Backup using Enterprise Manager

 Support Note 48: Performing a Backup using SQL Server Management Studio

(SSMS)

2. Properly label the MSDE/SQL database backup file.

3. Ensure that the backup is successful.

CCHPRACTICE MANAGEMENT V4.60HOTFIX RELEASE &INSTALLATION NOTES –JUNE 2012 7

Installation Instructions

Important: Before performing an upgrade, ensure all users have exited CCH Central. The following table provides a high-level summary of the installation steps:

Step Description Completed

1

Preparation

Create a new folder on the Desktop (or within an appropriate folder location) on the File Server where the Deploy folder resides and name it Updates. Note: The Deploy folder is where the existing CCH Central, Practice

Management and Personal Tax program files are deployed. See Support Note 57 for details on how to locate your Deploy directory. You can find all CCH Central, Practice Management and Personal Tax Support Notes on the CCH Website under KnowledgeBase .



2

Download

Download the CCH_Practice_Management_v4_60_Hotfix.exe file to the

new Updates folder.



3

Extracting Update Files:

Double click the CCH_Practice_Management_v4_60_Hotfix.exe file. Click OK.



8 CCHPRACTICE MANAGEMENT V4.60HOTFIX RELEASE &INSTALLATION NOTES –JUNE 2012

Step Description Completed

5

Click OK.



6 Verify that a CCH Practice Management v4.60 Hotfix folder has been created within the Updates folder.

7

Backup Program Files:

Best practice before performing an update to the Deploy folder is to back up the CCH Central program files.

Take a copy of the Deploy folder and paste into the Updates folder. (Rename copy to Deploy_Backup_Latest).

Note: Please ensure that the backup deploy folder is not within the same folder structure as your existing deploy.



8

Updating Program Files:

Copy the file contents from CCH Practice Management v4.60 Hotfix folder and paste into the live Deploy folder and replace the existing files. Note: Please ensure that when pasting the files, the message “Confirm File Replace” is received, i.e. an existing set of files is found.

CCHPRACTICE MANAGEMENT V4.60HOTFIX RELEASE &INSTALLATION NOTES –JUNE 2012 9

Step Description Completed

Note: On a Windows 2008/Windows 7 computer, please ensure that when pasting the files, the message “There is already a file with the same name in this location.”

Tick Do this for the next xx conflicts and then click the Copy and replace option.

9

Updating Database:

Go to a workstation on which CCH Central is currently installed and launch the application using the CCH Central icon and Log in.

Note: The CCH Central shortcut will be available on the desktop of a

workstation and looks like this:



10

Click Yes to initiate the upgrade process

Note: If the SQL System Administrator (SA) account has a password, the Upgrade Needed dialog will also contain a field for entering the password.



11

Back up the CCH Central Database:

Best practice before running an upgrade script is to back up your CCH Central database.

Click Yes to do a system-generated backup.

10 CCHPRACTICE MANAGEMENT V4.60HOTFIX RELEASE &INSTALLATION NOTES –JUNE 2012

Step Description Completed

12 Click Yes.







Navigate to HelpAboutPluginsPractice ManagementUpgrades.

Ensure that the version is 4.60.0.107

CCHPRACTICE MANAGEMENT V4.60HOTFIX RELEASE &INSTALLATION NOTES –JUNE 2012 11

Step Description Completed

Click .

16 _{Delete the Updates folder on the Desktop of the File Server.}

