Requirements
Requirements for using BeSpoke
with this unit: Apple iPhone 4 or
4S.
Connection to the Internet via 3G,
GSM/EDGE, CDMA or Wi-Fi network
Getting Started
Download the latest version of the
free BeSpoke app by going to the
Apple iTunes App Store and search
for "BeSpoke". Once installed,
launch the app and create your
account, then connect your iPhone
with the cables provided. (see
detailed information on the next
page.)
The BeSpoke app
BeSpoke uses an app on your
iPhone that is displayed on the
screen in your car. BeSpoke lets
you do the following and more:
Listen to Internet Radio and share
your favorite stations with friends
Check friends’ Facebook updates
Create routes to destinations and
friends
Display Twitter/Facebook friends
on maps
Use voice to control the app
Search for destinations and share
the results with friends
To use this unit, first download the
BeSpoke application to your iPhone
and register for a Zypr account,
and then connect the iPhone to this
unit. (See detailed information on
the next page.)
•
•
•
•
•
•
BeSpoke Owner’s Manual
BeSpoke Premium Audio
How to Connect your
iPhone
Connect the iPhone as indicated
in the figure below using the cable
provided.
1. Remove any headphones connect to the iPhone
2. Push the dock connector into the dock connector port until you hear a click to connect firmly. If it does not go in smoothly, it may be upside down so do not force it in as this may result in damage.
3. Connect the USB cable into the vehicle's USB port
4. Connect the cable's audio jack into the jack port
5. Once connected, the iPhone will automatically turn on, and will indicate that an accessory has been connected to the iPhone To the vehicle's connector *1 USB port Jack port Dock connector
iPod (iPhone) with Dock connector port
*1 Connection location differs depending on the vehicle.
Vehicle type
Connection location
tC Connect to the connector near the shift knob. xB Connect to the connector
near the parking brake. xD Connect to the connector
near the cup holder. iQ Connect to the connector
near the shift knob. FR-S Connect to the connector
near the shift knob.
IMPORTANT
When the ignition switch is
set to ACC or ON, the iPhone’s
battery is charged while the
iPhone is connected.
You cannot use the iPhone’s
remote control while the
iPhone is connected.
You may hear noise if you
disconnect during iPhone
playback.
If there is a problem with the
screen display, disconnect and
reconnect the cable.
The iPhone should not be
locked.
•
•
•
•
•
To resolve most problems
when using your iPhone
with this unit, disconnect
your iPhone from the vehicle
iPhone connection and reset
it.
For instructions on how to
reset your iPhone, refer to the
User Guide of your iPhone.
Connect the Dock connector
directly to the iPhone with
Dock connector port. Do not
connect it via the iPhone Dock
or other connection.
When the iPhone is connected
to this unit, sound will also be
heard from the headphone of
the iPhone.
Disconnect the headphone
from the iPhone before use.
Content and usability may
change over time. Please
check our website at
www.scion.com/bespoke.
•
•
•
•
•
•
How to change the
alert style from
“Alerts” to “Banners”
Change the alert style from “Alerts” to “Banners” on the iPhone settings screen.
1 Touch [Notifications].
2 Touch the item you want to configure the alert style for.
3 Touch [Banners].
Repeat steps 2 and 3 to convert the alert style of all the items from “Alerts” to “Banners”.
How to connect Bluetooth
1 Touch [ ] then [Bluetooth] to display the setting menu.
2 Touch [Connect Phone] to pair your Bluetooth hands-free phone.
3 Touch [Add New] to connect your Bluetooth hands-free phone.
Bluetooth hands-free phone connection is complete.
iPhone setting
1 Touch [Location Service].
2 Switch [Location Service] to ON. 3 Switch [BeSpoke] to ON.
BeSpoke app setting
1 Launch BeSpoke app. 2
Touch [ ] on your iPhone
.3 Touch [Services].
4 Touch [Location Reporting].
5 Select Location Reporting. For more details about the Location Reporting setting, refer to the “About location setting” section on page 28.
Quick Start
Scion’s Internet Radio Other Internet Radio Stations Initiates Voice RecognitionZoom In / Out Return to Current Location North / Heading Up Social Network Service POI Search Routing Zoom In Level Cell Phone Reception: ON Cell Phone Reception: OFF Current Location
Listening to Internet Radio
Touch [ ] to listen to and enjoy Internet Radio.
Touch [List] on the displayed screen to pull up a genre list from which you can select a favorite station.
The Internet Radio station can be shared with friends using the direct mail service on Twitter.
Touch [ ] to pull up a station list of Scion Audio Visual stations from which you can select a favorite sta-tion to play.
•
Checking Twitter/ Facebook
Touch [ ] to access the Timelineon Twitter and the News Feed on Facebook.
You can also use this function to check the Tweets and Feeds of reg-istered friends in the list.
The location of friends who are disclosing their location will be dis-played on the map.
Searching for Points of Interest
Touch [ ] to pull up a genre list that you can use to search for POIs. You can display POI search results on the MAP, and create routes to
•
•
each POI.
POI search results can be shared using Twitter's direct mail service.
Using Voice Routing
Touch [ ] on the right side of the screen to pull up a map and direction list.
Touch a balloon or direction from the list to start audio guidance.
You can find routes for destinations easily using the list of recents.
Using BeSpoke's Voice
Recognition
Touch [ ] to activate function con-trol using your voice.
Start talking after the beep stops. If another Bluetooth audio device in addition to iPhone is connected, Voice Recognition may not work properly. If so, please set Bluetooth audio to the iPhone only.
* The following voice control
functions are available:
Playing Internet Radio.
Getting Status Updates (Twitter/
Facebook)
Sending direct messages
Searching for friends
Searching for POIs
•
Searching for routes
* A Bluetooth connection is needed
in order to use voice control.
* Touch [
] on your iPhone
and then use [Help] to check
the operating procedures for
each icon. (When iPhone is
disconnected.)
* For more details, please visit our
website at
www.Scion.com/BeSpoke.
* Operational procedures may
differ depending on the version
of the application being used.
How to Use BeSpoke
(Touch Operation):
The following instructions assume that the iPhone is connected to the car and the BeSpoke app has been launched.
How to listen to Internet Radio
Play and stop
1 Touch [ ].
2 Touch [ ] to display the Internet Radio screen.
•
Choose by Genre
1 Touch [List] to display the Internet Radio Service Provider Search screen.
2 Touch [Tuner2 - Genre] to switch to the Genre Search screen.
•
3 Touch the listing for your favorite genre.
The list of the Internet radio stations within the selected genre will appear.
The station you select will begin playing automatically.
To add the current Internet Radio station to your Favorites, touch [+Fav].
To remove the current Internet Radio station from your Favorites, touch [-Fav].
Touch [ ]to return to the regular map screen.
Choose by Internet Radio
service provider
1 Touch [List] to display the Internet Radio Service Provider Search screen.
2 Choose one of the following operations to suit your preference.
To select from the Internet Radio station recommended by Scion, touch [SCION AV RADIO].
To select from your favorite Internet Radio Stations, touch [Favorites].
•
•
•
To select from the Internet Radio Stations you listened to recently, touch [Recents].
•
How to show friends on the map
1 Touch [ ].
2 Touch [ ] to display the MyFriends & Me list.
3 Select the friend whose current location you want to know.
4 Touch [Map].
A balloon appears on the map, indicating the current location of your friend.
How to Search for a Local Business
POI
1 Touch [ ].
2 Touch [ ] to display the POI list screen.
3 Select the POI you are searching for from the list.
If you cannot find the desired POI, or if you want to narrow the search list, do one of the following:
To select the desired POI by category, touch [Category] to display the Category screen.
•
Touch [favorite] to select from the list of your favorite POIs. 4 You can perform the following operations on the Detail screen for the selected POI:
Touch [Map] to display a balloon on the map that indicates the location of your POI.
Touch [Route] to display the route to the target POI on the map.
•
•
Touch [+Fav] to add the POI to the Favorite list.
Touch [-Fav] to remove the POI from the Favorite list.
Touch [MSG] to send the POI information along with your message to your registered friends.
How to send a direct message
from the Twitter follower list
1 Display the MyFriends & Me list. Refer to the "How to show friends on the map" section on page 8.
2 Touch either [ ] or [ ] to display Twitter followers.
•
•
•
3 Select your Twitter follower from the MyFriend & Me list.
4 Touch [MSG].
5 Touch [Messages] to display the message sample list.
6 Select a message you want to send.
7 Confirm the message to send, and then touch [Send].
4 Select a Follow item you want to reply to.
5 Touch [Reply].
6 Touch [Messages] to display the message sample list.
7 Select a message you want to send.
8 Confirm the message to send, and then touch [Send].
The direct message will be sent.
How to send a direct message
1 Display the MyFriends & Me list. Refer to the "How to show friends on the map" section on page 8.
2 In the MyFriends & Me list, select your Twitter ID.
3 Touch [Direct Message] to switch to the Follow screen.
How to set a route from a balloon
1 Touch Balloon.
2 Touch [Route].
3 A route overview will appear.
Touch [GO!] to set it as a destination.
To cancel, touch [Cancel].
It will not provide automatic turn-by-turn guidance.
How to set a route to a Twitter
follower
1 Display Twitter followers. Refer to the "How to send a direct message from the Twitter follower list" section on page 10.
2 Select your Twitter follower from the MyFriend & Me list.
•
•
3 Touch [Route].
You cannot select followers who are not sharing their locations.
4 A route overview will appear. Refer to step 3 of "How to set a route from a balloon" section on this page.
How to display a recent route
1 Touch [ ].
2 Touch [ ] to display the maneuver screen for the currently-specified route.
3 Touch [Recent] to display the list for the routes that you set recently.
4 Select a route.
The selected route will be displayed. 5 A route overview will appear. Refer to step 3 of "How to set a route from a balloon" section on page 12.
It will not provide automatic turn-by-turn guidance.
How to set a route to a location
on the map
1 Touch the map and drag it to the area you want to set a route to.
2 Touch and hold the cross mark and the can set the destination route.
3 A route overview will appear. Refer to step 3 of "How to set a route from a balloon" section on page 12.
How to view status update on
1 To view status update on Facebook, display the MyFriends & Me list.
Refer to the "How to show friends on the map" section on page 8.
2 Select your Facebook avatar from the MyFriends & Me list.
The News Feed screen appears.
How to view Timeline on Twitter
1 To view Timeline on Twitter, display the MyFriends & Me list. Refer to the “How to show friends on the map” section on page 8. 2 Select your Twitter avatar from
the MyFriends & Me list.
When BeSpoke automatically detects the end of the spoken voice command, the following screen appears.
Search by voice recognition
1 Say a ‘search’ voice command on the talk command screen.
If the ‘search’ voice command is correctly recognized, the spoken command appears.
The search result appears on the map screen.
•
How to Use BeSpoke
(Voice Commands)
1 Touch [ ] on the map screen or Internet Radio screen.
After a beep, the talk command screen appears.
BeSpoke is listening for a voice command.
For voice commands, refer to the "Voice commands list" section on page 18.
Playing Internet Radio
Say a play Internet radio voice command.
When the Internet Radio is playing, the screen will display a genre, station list or specific station according to the command.
If the voice command is not clearly recognized, a list of candidates close to the spoken command appears, and voice commands are activated.
From the displayed list, select and say the command number. You can also touch [ ] and say the number to activate the voice commands.
•
• •
A list of stations appears and voice commands are activated.
From the displayed list, select and say the command number. You can also touch [ ] and say the number to activate the voice commands.
•
•
How to send a message
1 Say a ‘send message’ voice command on the talk command screen.
For the voice command screen, refer to the "How to Use BeSpoke (Voice Commands)" section on page 15.
The spoken command appears.
When sending a message or searching a POI, BeSpoke waits for you to say the message or the name of POI.
2 Touch [ ].
After a beep, the talk command screen appears.
4 Touch [ ].
After a beep, the talk command screen appears.
5 Check the recognized message and say one of the following:
If the recognized message is correct, say "Yes".
If the recognized message is incorrect, say "No". BeSpoke returns to step 2.
When BeSpoke automatically detects the end of the spoken voice command, the recognized message appears.
If the voice command is used on the Internet Radio screen, BeSpoke returns to the Internet Radio screen.
•
• 3 When sending a message or
searching a POI, say one of the following:
When sending a message, say the message you want to send, e.g. Hello.
When searching a POI, say the name of the POI, e.g. BeSpoke Cafe.
When BeSpoke automatically detects the end of the spoken voice command, the recognized message appears.
•
•
First use a 'send message to' voice command, then when BeSpoke confirms the command and indicates "Please send message text", dictate the message you want to send.
Voice Commands List
Internet Radio
Example voice command
Explanation
Show <genre> station
Obtains the station list of the specified genre.
Play <station name>
Plays the specified Internet Radio station.
Play Internet Radio
Obtains a genre list of the Internet Radio.
Show recent station
Obtains the recently played list of stations.
Stop the music
Stops playing the station.
Stop
Stops the music.
Play a random station
Selects a radio station at random.
Friend
Example voice command
Explanation
Find <friend name> on the map
Searches a friend on the map.
I want to see <friend name>
POI
Example voice command
Explanation
Find <category name> nearby
Specifies a POI category on the currently displayed map screen to
search the surrounding area.
Find local business
Searches POIs in the surrounding area.
Find business in <City> <State>
Searches POIs in the specified city.
Route
Example voice command
Explanation
Route to <list number>
Finds a route to the POIs displayed in the search results
after a POI search.
(Specifies a POI using a list number)
Route to <friend name>
Finds a route to a friend recognized by the application.
Cancel routing
Deletes the found route.
Reroute to last destination
Reroutes to the most recent destination.
Message
Example voice command
Explanation
Send <list number> to <friend name>
Specifies a POI using a list number and sends information
to a friend after a POI search.
Send this station to <friend name>
Sends the information on the currently played Internet
Radio station to a friend.
Show my messages
This command is effective only when there is a new
message.
Reply to this message
Replies to a message confirmed by the Show my
messages command.
Next message
Shows the next message.
Previous message
Shows the previous message.
Post a status update on Twitter
Posts on Twitter.
Post a status update on Facebook
Posts on your Facebook feed.
Send a message to <friend name>
Sends a direct message to <friend’s name>.
Error Lists
Server errors
Message
Cause
Action (Reference)
Sorry, taking a coffee break.
Please try again later.
Attempted to retrieve information or execute a command, but was not able to complete it.
Wait momentarily and then retry the oper-ation.
Voice recognition error
Message
Cause
Action (Reference)
Sorry, I didn’t catch that.
Please repeat it.
Unable to obtain voice recognition results from the Zypr server.
Repeat the voice command in a loud, clear voice.
Unsupported errors
Message
Cause
Action (Reference)
Sorry, that command isn’t
available.
Please see Examples.
BeSpoke does not support that voice
com-mand. Refer to the Voice Command Guide, double check the corresponding command and then repeat the voice command.
Message
Cause
Action (Reference)
Sorry, I don’t recognize
that item.
Please try again.
Unsuccessful in obtaining information for pointing out the POI from the voice recognition results.
Give the voice command after verifying the POI to be indicated.
Give the voice command after verifying the number to be indicated.
The POI designated by the voice recognition results – for which a search has already been carried out – does not exist amongst the POIs in the application.
Give the voice command after verifying the POI to be indicated.
Give the voice command after verifying the number to be indicated.
Radio playback is not selected immediately after logging out, so the radio station could not be designated.
Give the voice command after playing the radio.
Unsuccessful in obtaining the information for designating the radio station URL from the voice recognition results.
Give the voice command after double-checking the radio station you want to designate.
Unsuccessful in obtaining the information for designating the radio genre from the voice recognition results.
Give the voice command after double-checking the genre you want to designate. Friends and POIs for which routes are to be
created and for which names and numbers were indicated were not recognized. (The names and numbers indicated are not consistent with the names and numbers maintained within the application.)
Give the voice command after verifying the name and number of the item to be indicated.
Sorry, I didn’t catch that.
Please repeat it.
Unsuccessful in obtaining information for specifying message details from the voice recognition results.
Message
Cause
Action (Reference)
Sorry, that location can’t be
found.
Please try again.
Because there is no location information regard-ing the friends or POIs for which routes are to be created and names and numbers indicated, this information cannot be verified.
Give the voice command after verifying that the designated item has location informa-tion (i.e., that the item is on the map).
A friend without any location information was specified.
Give the voice command after verifying that the friend to be specified has location infor-mation (i.e, that the friend is on the map).
Sorry, I don’t see that friend
on your list.
Please try again.
Information for specifying friends could not be obtained from the voice recognition results.
• Verify the link to the service provider that your designated friend uses (i.e., that service authorization has been completed) on the Config screen.
• Give the voice command after verifying your friend who is to be specified. • Please check your setup and verify your
friend. The friend indicated in the voice
recogni-tion results is not on the Friends list that was acquired within the application.
Information for specifying friends whom you will be contacting could not be obtained from the voice recognition results.
Sorry, this feature is for
Twitter friends only.
Please try again.
Service providers other than Twitter were specified in the voice recognition results.
• Verify that Twitter is linked to (i.e, that service authorization has been completed) on the Config screen.
• Give the voice command after verifying that your designated friend is a Twitter user.
Facebook is the service provider indicated by voice recognition results.
Message
Cause
Action (Reference)
Sorry, that Social Network
Service isn’t supported.
Please check your
configuration.
Information critical for sending the message could not be obtained from the voice recognition results.
• Verify the link to the service provider that your designated friend uses (i.e., that service authorization has been completed) on the Config screen.
• Give the voice command again.
• Verify that Facebook and Twitter are linked to (i.e., that service authorization has been completed) on the Config screen.
• Give the voice command after verifying that the designated service provider is Twitter or Facebook.
• Verify that Twitter are linked to (i.e., that service authorization has been completed) on the Config screen. • Give the voice command after verifying
that the designated service provider is Twitter.
Sorry, that Internet Radio
sta-tion isn’t supported.
Unsuccessful in obtaining the information for designating the radio station servicer from the voice recognition results.
Give the voice command after double-checking the radio station you want to designate
Sorry, your {Twitter/Facebook}
account isn’t registered.
Please check your
configuration.
Not linked to {Twitter/FaceBook}. • Verify that {Twitter/FaceBook} are linked to (i.e., that service authorization has been completed) on the Config screen. • Give the voice command again. Was not connected to the service provider
des-ignated by voice recognition results.
• Verify that the designated service provider is linked to (i.e., that service authoriza-tion has been completed) on the Config screen.
Message
Cause
Action (Reference)
Sorry, your last destination
isn’t set.
Please set your destination.
With no route established, there was no destina-tion data, so rerouting could not be carried out.
Give the voice command after setting up the route.
Sorry, your destination isn’t
set.
With no route established, there was no route data to begin with, so no route deletion can be carried out.
Give the voice command after setting up the route.
Sorry, there are no New
Messages.
“Show Message” is stated in the absence of a new message.
Give the voice command after having received the new message.
Sorry, there are no recent
stations.
No broadcast stations have been listened to recently, so no list can be displayed.
Give the voice command after playing the radio.
Network error
Message
Cause
Action (Reference)
Sorry, your device is no longer
connected to the Internet.
Unit has been moved out of 3G/Wi-Fi commu-nications range.
3G/Wi-Fi communications no longer possible.
Change locations or wait for a short amount of time until 3G/Wi-Fi communications are reestablished.
Other errors
Message
Cause
Action (Reference)
Sorry, no account found.
Please check your
configuration.
• The service provider is not linked to on Config. • Information regarding the service provider that
is linked to cannot being obtained.
• If there is an error message right after log-ging in, wait for a moment and then carry out the action again.
• When there is an error message sometime other than right after login, verify that the service provider is linked to (i.e., that service authorization has been completed) on the Config screen. The number of Friends cases obtained from Zypr
is zero.
Verify that the SNS service provider is linked to (i.e., that service authorization has been completed) on the Config screen.
Sorry, that attachment can’t
be opened.
Something other than the radio or POI was con-nected.
Have the message resent after connecting the radio or POI.
Sorry, that station can’t be
found.
Please try again later.
The URL of the broadcast station was obtained from the Zypr server but it was not correct.
Wait for a moment and then carry out the action again.
Sorry, your list is full.
Please delete an item.
The number of registered Favorites has reached the maximum limit.
• Friends: 30 • POI: 9 • Radio: 16
Delete the item from Favorites and, after creating space amongst the registered items, re-register the item in question.
Message
Cause
Action (Reference)
Sorry, Zypr server is busy.
Please try again later.
There is no data to be registered. Wait momentarily and then retry the opera-tion.
The data obtained from Zypr did not contain anything.
Wait momentarily and then retry the opera-tion.
Sorry, that item is already a
Favorite.
The data that you are trying to register has already been registered.
Wait momentarily and then retry the opera-tion.
Sorry, your last destination
isn’t set.
Please set your destination.
With no route established, there was no destination data, so rerouting could not be carried out.
After setting up the route, try rerouting again.
Sorry, I didn’t recognize the
account.
Please enter it again.
The e-mail address (account) and password com-bination that was input is not correct.
Double-check the account and password and then re-enter them.
Sorry, I don’t see your Email
Address.
The Login button was pressed without any information entered for the input item Account (e-mail address).
Input the account information and then press the button again.
Please enter your email address.
Sorry, I don’t see your
Password.
The Login button was pressed without any information entered for the input item Password.
Input the password information and then press the button again.
Sorry, I don’t see your First
Name.
The Sign Up button was pressed without any information entered for the input item First Name.
Input item First Name information and then press the button again.
Message
Cause
Action (Reference)
Sorry, I don’t see your Last
Name.
The Sign Up button was pressed without any information entered for the input item Last Name.
Input item Last Name information and then press the button again.
Sorry, I don’t see your
Email Address.
The Sign Up button was pressed without any information entered for the input item Account (e-mail address).
Input the account information and then press the button again.
Please enter your email address.
Sorry, I don’t see your
Password.
The Sign Up button was pressed without any information entered for the input item Password.
Input the password information and then press the button again.
Sorry, I don’t see your
Confirmed Password.
The Sign Up button was pressed without any information entered for the input item Confirm.
Input item Confirm (Password) information and then press the button again.
Sorry, I need your Password
to be more than 8 but less
than 40 characters.
The Sign Up button was pressed with less then eight characters being entered for the Password input item.
Input a password containing at least eight but not more than 40 characters, and then press the button again.
The Sign Up button was pressed with more than 40 characters being entered for the Password input item.
Input a password containing at least eight but not more than 40 characters, and then press the button again.
Sorry, I don’t think your
Password and Confirmed
Password match.
The Sign Up button was pressed with non-identical Password and Confirm (Password) input items.
After verifying that Password and Confirm (Password) are identical, press the button again.
Message
Cause
Action (Reference)
Sorry, BeSpoke doesn’t
sup-port your device.
Please check Scion.com for
compatibility.
An iPhone 3G or some other incompatible device has been connected to the this unit.
After verifying that the device in question is a compatible model that is registered on scion.com, try reconnecting the device.
Sorry, there are no preset
POIs.
The POI search history returns zero hits. After performing a search for “Business search @nearby” using your iPhone, carry out the operations again using the on-board screen.
Sorry, there are no results
in the viewable area.
The number of POI cases obtained from Zypr is zero.
Select another category, or try again after moving to another part of the map.
Sorry, your Friends List is
empty.
Please check your
configura-tion.
The number of Friends cases obtained from Zypr is zero.
Verify that the SNS service provider is linked to (i.e., that service authorization has been completed) on the Config screen.
Sorry, I couldn't find that
genre.
There aren't any stations in that genre. Select another genre, or wait a while and try again.
Sorry, I couldn’t find those
stations.
The number of Radio Station cases obtained from Zypr is zero.
Select another genre, or try again after wait-ing momentarily.
About location setting
Sharing of your location is completely manageable by you. Make sure you follow these steps to take a full control of your location information.
1. iPhone setting is ON to allow access to your GPS location.
2. BeSpoke App setting is selected as “Detect your location” to update your GPS location. You can also set your location manually (“Set your location”) by setting the center of the current map as your location or hiding your location completely (“Hide your location”) so that your location cannot be found by your friends in the Friends List.
NOTICE
When GPS is set to ON in the Location Services
settings on your iPhone, the BeSpoke default setting is
[Detect your location].
When GPS is set to OFF in the Location Services
settings on your iPhone, the BeSpoke default setting is
[Hide your location].
•
3. Select who you would like to share your location with. (Up to 30 accounts, e.g. If your friend has both Twitter and Facebook accounts and you add these accounts, then it counts as ‘two’)
NOTICE
Your location setting cannot be altered on an individual account basis. Once you select “Detect your
location”, then you are revealing your location to every friend added by you here as well as services
accessed through BeSpoke.
4. You will see your friends on the map. Make sure the Social bar is ON in order to see your friends.
5. Enjoy!
•
NOTICE
There is no way of knowing on the BeSpoke app
whether your friend’s location is the actual location
of the Smartphone (GPS location) or a manually
registered location.
•
Select account
Added friends
Compatible Device
Models and Versions
Compatible devices are iPhone 4, iPhone 4S and iPod Touch (4G) with an iOS of 5.0 or later. (As of February 23, 2012)
Disclaimer
BeSpoke app requires iOS 5.0 or later on iPhone4, iPhone 4S with data plan or iPod touch (4th gen or newer; WiFi access required) Features of the BeSpoke app may be changed without notice. Zypr account registration required to access content and services. Must be at least 18 years old or have permission of a parent or legal guardian. Service available in the United States only. PIONEER and the Pioneer logo are registered trademarks of Pioneer Corporation. [1] Performance of Bluetooth®
compatible phones will vary based on phone software version, coverage, and your wireless carrier. The Bluetooth® word mark and
logos are registered trademarks owned by Bluetooth SIG, Inc. [2] iPhone® is a registered trademark
of Apple, Inc. All rights reserved. [3] iPod® is a registered trademark
of Apple, Inc. All rights reserved. [4] App StoreSM is a service mark
of Apple, Inc. All rights reserved. [5] ZYPR is a trademark of Pioneer Corporation.
[6] Twitter® is a registered
trademark of Twitter Inc.
Available Carriers
Any carrier may be used with BeSpoke and it is also enabled for Wi-Fi.
[7] Tuner2 is a trademark of Media Tuners LLC.
[8] Facebook is a registered trademark of Facebook, Inc. ©2012 Scion, a marque of Toyota Motor Sales, U.S.A., Inc. All rights reserved. Scion and the Scion logo are trademarks of Toyota Motor Corporation.
