129 Flanders Road
Westborough, MA 01581 Tel +1-508-339-3000 Fax +1-508-339-6356 www.murata-ps.com
Page - 1 - of 2
RoHS Declaration of Conformance
Murata Power Solutions (MPS) hereby declares and certifies that, the product(s) identified below is/are RoHS compliant according to the definitions and requirements of the European Union Restriction on the use of Hazardous Substances (RoHs) Directive, 2011/65/EU and requirements of amending Annex II to RoHS 2 (Delegated Directive 2015/863).
Other than any allowed exemption(s) included in the RoHS Directive and shown below if applicable, Murata Power Solutions certifies that the following materials or substances are not found above the threshold levels as defined in the RoHS Directive.
Material/Substance *Threshold Level
Cadmium 0.01%
Hexavalent Chromium 0.10%
Lead 0.10%
Mercury 0.10%
Polybrominated Biphenyls (PBB) 0.10%
Polybrominated Diphenyl Ethers (PBDE) 0.10%
Bis(2-ethylhexyl) phthalate (DEHP) 0.10%
Butyl benzyl phthalate (BBP) 0.10%
Dibutyl phthalate (DBP) 0.10%
Diisobutyl phthalate (DIBP) 0.10%
*
Maximum concentration by weight in homogenous materials.*Related models are listed in page 2
Authorized signature,
Jay vanWormer
Associate Director--Quality, Safety and Environmental Compliance
Email: [email protected] Date: 12-04-2020
Important Information and Disclaimer: This certification is based on information provided by third party suppliers of components and materials. While Murata Power Solutions continues to take reasonable steps to ensure that its suppliers have provided accurate and correct information, including, the performance of destructive testing and chemical analysis of components when deemed necess ary, Murata Power Solutions makes no certification and disclaims any warranty, whether express or implied, as to the accuracy or completeness of any information supplied by its component suppliers. Information posted by Murata Power Solutions on its websites
MPS Product Name Exemption(s) claimed
MGJ1D12xxxxMPC 7a, 7c-I
129 Flanders Road
Westborough, MA 01581 Tel +1-508-339-3000 Fax +1-508-339-6356 www.murata-ps.com
Page - 2 - of 2
or published in other documents concerning the composition or content of its products reflects the Company’s knowledge and belief as of the date that the information is published.
MPS Product Name MGJ1D121505MPC MGJ1D121509MPC MGJ1D121905MPC
129 Flanders Road
Westborough, MA 01581 Tel +1-508-339-3000 Fax +1-508-339-6356 www.murata-ps.com
Page - 1 - of 2
RoHS Declaration of Conformance
Murata Power Solutions (MPS) hereby declares and certifies that, the product(s) identified below is/are RoHS compliant according to the definitions and requirements of the European Union Restriction on the use of Hazardous Substances (RoHs) Directive, 2011/65/EU and requirements of amending Annex II to RoHS 2 (Delegated Directive 2015/863).
Other than any allowed exemption(s) included in the RoHS Directive and shown below if applicable, Murata Power Solutions certifies that the following materials or substances are not found above the threshold levels as defined in the RoHS Directive.
Material/Substance *Threshold Level
Cadmium 0.01%
Hexavalent Chromium 0.10%
Lead 0.10%
Mercury 0.10%
Polybrominated Biphenyls (PBB) 0.10%
Polybrominated Diphenyl Ethers (PBDE) 0.10%
Bis(2-ethylhexyl) phthalate (DEHP) 0.10%
Butyl benzyl phthalate (BBP) 0.10%
Dibutyl phthalate (DBP) 0.10%
Diisobutyl phthalate (DIBP) 0.10%
*
Maximum concentration by weight in homogenous materials.*Related models are listed in page 2
Authorized signature,
Jay vanWormer
Associate Director--Quality, Safety and Environmental Compliance
Email: [email protected] Date: 12-04-2020
Important Information and Disclaimer: This certification is based on information provided by third party suppliers of components and materials. While Murata Power Solutions continues to take reasonable steps to ensure that its suppliers have provided accurate and correct information, including, the performance of destructive testing and chemical analysis of components when deemed necess ary, Murata Power Solutions makes no certification and disclaims any warranty, whether express or implied, as to the accuracy or completeness of any information supplied by its component suppliers. Information posted by Murata Power Solutions on its websites
MPS Product Name Exemption(s) claimed
MGJ1D15xxxxMPC 7a, 7c-I
129 Flanders Road
Westborough, MA 01581 Tel +1-508-339-3000 Fax +1-508-339-6356 www.murata-ps.com
Page - 2 - of 2
or published in other documents concerning the composition or content of its products reflects the Company’s knowledge and belief as of the date that the information is published.
MPS Product Name MGJ1D151505MPC MGJ1D151509MPC MGJ1D151905MPC
129 Flanders Road
Westborough, MA 01581 Tel +1-508-339-3000 Fax +1-508-339-6356 www.murata-ps.com
Page - 1 - of 2
RoHS Declaration of Conformance
Murata Power Solutions (MPS) hereby declares and certifies that, the product(s) identified below is/are RoHS compliant according to the definitions and requirements of the European Union Restriction on the use of Hazardous Substances (RoHs) Directive, 2011/65/EU and requirements of amending Annex II to RoHS 2 (Delegated Directive 2015/863).
Other than any allowed exemption(s) included in the RoHS Directive and shown below if applicable, Murata Power Solutions certifies that the following materials or substances are not found above the threshold levels as defined in the RoHS Directive.
Material/Substance *Threshold Level
Cadmium 0.01%
Hexavalent Chromium 0.10%
Lead 0.10%
Mercury 0.10%
Polybrominated Biphenyls (PBB) 0.10%
Polybrominated Diphenyl Ethers (PBDE) 0.10%
Bis(2-ethylhexyl) phthalate (DEHP) 0.10%
Butyl benzyl phthalate (BBP) 0.10%
Dibutyl phthalate (DBP) 0.10%
Diisobutyl phthalate (DIBP) 0.10%
*
Maximum concentration by weight in homogenous materials.*Related models are listed in page 2
Authorized signature,
Jay vanWormer
Associate Director--Quality, Safety and Environmental Compliance
Email: [email protected] Date: 12-04-2020
Important Information and Disclaimer: This certification is based on information provided by third party suppliers of components and materials. While Murata Power Solutions continues to take reasonable steps to ensure that its suppliers have provided accurate and correct information, including, the performance of destructive testing and chemical analysis of components when deemed necess ary, Murata Power Solutions makes no certification and disclaims any warranty, whether express or implied, as to the accuracy or completeness of any information supplied by its component suppliers. Information posted by Murata Power Solutions on its websites
MPS Product Name Exemption(s) claimed
MGJ1D24xxxxMPC 7a, 7c-I
129 Flanders Road
Westborough, MA 01581 Tel +1-508-339-3000 Fax +1-508-339-6356 www.murata-ps.com
Page - 2 - of 2
or published in other documents concerning the composition or content of its products reflects the Company’s knowledge and belief as of the date that the information is published.
MPS Product Name MGJ1D241505MPC MGJ1D241509MPC MGJ1D241905MPC
129 Flanders Road
Westborough, MA 01581 Tel +1-508-339-3000 Fax +1-508-339-6356 www.murata-ps.com
Page - 1 - of 2
RoHS Declaration of Conformance
Murata Power Solutions (MPS) hereby declares and certifies that, the product(s) identified below is/are RoHS compliant according to the definitions and requirements of the European Union Restriction on the use of Hazardous Substances (RoHs) Directive, 2011/65/EU and requirements of amending Annex II to RoHS 2 (Delegated Directive 2015/863).
Other than any allowed exemption(s) included in the RoHS Directive and shown below if applicable, Murata Power Solutions certifies that the following materials or substances are not found above the threshold levels as defined in the RoHS Directive.
Material/Substance *Threshold Level
Cadmium 0.01%
Hexavalent Chromium 0.10%
Lead 0.10%
Mercury 0.10%
Polybrominated Biphenyls (PBB) 0.10%
Polybrominated Diphenyl Ethers (PBDE) 0.10%
Bis(2-ethylhexyl) phthalate (DEHP) 0.10%
Butyl benzyl phthalate (BBP) 0.10%
Dibutyl phthalate (DBP) 0.10%
Diisobutyl phthalate (DIBP) 0.10%
*
Maximum concentration by weight in homogenous materials.*Related models are listed in page 2
Authorized signature,
Jay vanWormer
Associate Director--Quality, Safety and Environmental Compliance
Email: [email protected] Date: 12-04-2020
Important Information and Disclaimer: This certification is based on information provided by third party suppliers of components and materials. While Murata Power Solutions continues to take reasonable steps to ensure that its suppliers have provided accurate and correct information, including, the performance of destructive testing and chemical analysis of components when deemed necess ary, Murata Power Solutions makes no certification and disclaims any warranty, whether express or implied, as to the accuracy or completeness of any information supplied by its component suppliers. Information posted by Murata Power Solutions on its websites
MPS Product Name Exemption(s) claimed
MGJ1D0515xxMPC 7a, 7c-I
129 Flanders Road
Westborough, MA 01581 Tel +1-508-339-3000 Fax +1-508-339-6356 www.murata-ps.com
Page - 2 - of 2
or published in other documents concerning the composition or content of its products reflects the Company’s knowledge and belief as of the date that the information is published.
MPS Product Name
MGJ1D051505MPC
MGJ1D051510MPC
129 Flanders Road
Westborough, MA 01581 Tel +1-508-339-3000 Fax +1-508-339-6356 www.murata-ps.com
Page - 1 - of 2
RoHS Declaration of Conformance
Murata Power Solutions (MPS) hereby declares and certifies that, the product(s) identified below is/are RoHS compliant according to the definitions and requirements of the European Union Restriction on the use of Hazardous Substances (RoHs) Directive, 2011/65/EU and requirements of amending Annex II to RoHS 2 (Delegated Directive 2015/863).
Other than any allowed exemption(s) included in the RoHS Directive and shown below if applicable, Murata Power Solutions certifies that the following materials or substances are not found above the threshold levels as defined in the RoHS Directive.
Material/Substance *Threshold Level
Cadmium 0.01%
Hexavalent Chromium 0.10%
Lead 0.10%
Mercury 0.10%
Polybrominated Biphenyls (PBB) 0.10%
Polybrominated Diphenyl Ethers (PBDE) 0.10%
Bis(2-ethylhexyl) phthalate (DEHP) 0.10%
Butyl benzyl phthalate (BBP) 0.10%
Dibutyl phthalate (DBP) 0.10%
Diisobutyl phthalate (DIBP) 0.10%
*
Maximum concentration by weight in homogenous materials.*Related models are listed in page 2
Authorized signature,
Jay vanWormer
Associate Director--Quality, Safety and Environmental Compliance
Email: [email protected] Date: 12-04-2020
Important Information and Disclaimer: This certification is based on information provided by third party suppliers of components and materials. While Murata Power Solutions continues to take reasonable steps to ensure that its suppliers have provided accurate and correct information, including, the performance of destructive testing and chemical analysis of components when deemed necess ary, Murata Power Solutions makes no certification and disclaims any warranty, whether express or implied, as to the accuracy or completeness of any information supplied by its component suppliers. Information posted by Murata Power Solutions on its websites
MPS Product Name Exemption(s) claimed
MGJ1D051905MPC 7a, 7c-I
129 Flanders Road
Westborough, MA 01581 Tel +1-508-339-3000 Fax +1-508-339-6356 www.murata-ps.com
Page - 2 - of 2
or published in other documents concerning the composition or content of its products reflects the Company’s knowledge and belief as of the date that the information is published.
