D0601 Closer - Standard Arm Installation Instructions
SPRING POWER ADJUSTMENT
Adjust closer size according to chart on the right
CC: Counterclockwise C: Clockwise
*: Factory Pre-set
2-5 MODEL
No. Of Turns Size Direction 7½4
03
* 4½
23 3-44
5
CCCC CC- C
221
214 50 50
43
4.2 2.5
1 2 3 4
90°
Power+10%
SPEED
UP SLOW DOWN BC
No.2
No.2
No.1
No.1
Adjustable power screw
Power-10%
M5
D0601 Closer - Standard Arm Installation Instructions
SPRING POWER ADJUSTMENT
Adjust closer size according to chart on the right
CC: Counterclockwise C: Clockwise
*: Factory Pre-set
2-5 MODEL
No. Of Turns Size Direction 7½4
03
* 4½
23 3-44
5
CCCC CC- C
221 45
50 50 214
78
43
4.2 2.5 M5
1 2 3 4
90°
Power+10%
SPEED
UP SLOW
DOWN No.2 BC
No.2
Adjustable power screw
Power-10%
No.1
No.1
D0601 Closer - Parallel Arm Installation Instructions
PARALLEL ARM INSTALLATION
FOR ANTI CLOCKWISE OPENING DOORS (CLOSER MOUNTED ON DOOR ON PUSH SIDE)
NO.1 CLOSING BACKCHECK
4-#10x2”
4-#12x5/8”
FOLD HERE
This face to undeside of frame head
Parallel Bracket
Set to underside of frame head
Set this end to the left of door
NO.2 LATCHING
SPEED ADJUSTING VALVE SPEED
UP SLOW
DOWN
NO. 1
1
35 °
35 ° 35 °
3
2 SPRING POWER ADJUSTMENT
PARALLEL ARM INSTALLATION FOR ANTI CLOCKWISE OPENING DOOR FOR CLOCKWISE OPENING DOOR SEE THE BACK PAGE
The template covers regular parallel arm installation to 180° openings
Adjust closer size according to chart on the right
CC: Counterclockwise C: Clockwise
*: Factory Pre-set
2-5 MODEL
No. Of Turns Size Direction 7½4
03
* 4½
32 3-44
5
CCCC CC- C
Model No. Approximate Door Size (Width) Interior
830mm
930mm 830mm
1030mm 930mm
1130mm 1030mm
2 34 5
60KG 45KG Max. Door
Weight
80KG 110KG Exterior
Not Recommended
D0601 Closer - Parallel Arm Installation Instructions
SPEED ADJUSTING VALVE SPEED
UP SLOW
DOWN NO. 1
NO. 2
1
35 °
35 °
3 2
Model No. Approximate Door Size (Width) Interior
830mm
930mm 830mm
1030mm 930mm
1130mm 1030mm
2 34 5
60KG 45KG Max. Door
Weight
80KG 110KG Exterior
Not Recommended
PARALLEL ARM INSTALLATION
FOR ANTI CLOCKWISE OPENING DOORS (CLOSER MOUNTED ON DOOR ON PUSH SIDE)
NO.1 CLOSING BACKCHECK
4-M5x0.8
NO.2 LATCHING
FOLD HERE
This face to undeside of frame head
Set to underside of frame head
Set this end to the left of door
4-#12x5/8”
Parallel Bracket
SPRING POWER ADJUSTMENT
PARALLEL ARM INSTALLATION FOR CLOCKWISE OPENING DOOR FOR ANTI CLOCKWISE OPENING DOOR SEE THE BACK PAGE
The template covers regular parallel arm installation to 180° openings
Adjust closer size according to chart on the right
CC: Counterclockwise C: Clockwise
*: Factory Pre-set
2-5 MODEL
No. Of Turns Size Direction 7½4
03
* 4½
23 3-44
5
CCCC CC- C
D0601 Closer - Slide Arm Installation Instructions
Determine the installation position of the door closer place the templet on the closed door and the top jamb, and make holes in them with a punch or other
Fix the link shoe to the top jamb Fit the lever to the pinion shaft and fix it firmly with the screw
Adjust the link length so that the link makes a right angle with the top jamb, and fix with the lock nut
Adjust the closing speed.
The door closer closes the door at two different speeds.
The first speed can be controlled by the No.1 speed adjusting valve, and the second speed, by the No. 2 speed adjusting valve
Track Body Main arm
SLOW
No.1 CLOSING No.2 LATCHING FAST
Instructions for Installation of the Door Closers (Standard Type)
CAUTION - Pull Side Installation Only For Push Side Installation Order D0612 Long Slide Rail
HOLD - OPEN CLIP (OPTIONAL) SLIDER
SPRING POWER ADJUSTMENT
Adjust closer size according to chart on the bottom
*: Factory Pre-set 2-5 MODEL
No. Of Turns Size 7½0
* 2 2½
23 45
470
11 43
143
240 100
23.5 2-M5
D0601 Closer - Slide Arm Installation Instructions
SLOW FAST
Adjust the link length so that the link makes a right angle with the top jamb, and fix with the lock nut
FIX PINION CAP TO CLOSER BODY Adjust the closing speed.
The door closer closes the door at two different speeds.
The first speed can be controlled by the No.1 speed adjusting valve, and the second speed, by the No. 2 speed adjusting valve
CLOSING LATCHING
No.1 CLOSING No.2 LATCHING
Fix the link shoe to the top jamb Fit the lever to the pinion shaft and fix it firmly with the screw
Mount the closer on the door
Track Body Main arm Mounting screw
Determine the installation position of the door closer place the templet on the closed door and the top jamb, and make holes in them with a punch or other proper tool
Templet
Instructions for Installation of the Door Closers (Standard Type)
HOLD - OPEN CLIP (OPTIONAL) SLIDER
CAUTION - Pull Side Installation Only For Push Side Installation Order D0612 Long Slide Rail
SPRING POWER ADJUSTMENT
Adjust closer size according to chart on the bottom
*: Factory Pre-set 2-5 MODEL
No. Of Turns Size 7½0
* 2 2½
32 54
470
2-M5 23.5
11 43
240 100
143
Print Actual Size A3 D0601 Closer - D0612 Long Slide Rail Installation Instructions
CAUTION - PUSH SIDE INSTALLATION ONLY Using D0612 Long Slide Rail
344 148 140
100 100
43
8
22.5°
148 8
SPRING POWER ADJUSTMENT
Adjust closer size according to chart on the bottom
CC: Counterclockwise
HOLD - OPEN CLIP (OPTIONAL)
SLIDER
5
44 43
29
Print Actual Size A3 D0601 Closer - D0612 Long Slide Rail Installation Instructions
CAUTION - PUSH SIDE INSTALLATION ONLY Using D0612 Long Slide Rail
22.5°
344 148
8
140
43
100 5 100
29
34.5 43
148 8
HOLD - OPEN CLIP (OPTIONAL)
SLIDER
Print Actual Size A3 D0601 Closer - D0612 Long Slide Rail Installation Instructions
CAUTION - PUSH SIDE INSTALLATION ONLY Using D0612 Long Slide Rail
22.5°
148 140
43
100 100
HOLD - OPEN CLIP (OPTIONAL)
SLIDER
344 148 8
5
29 8
SPRING POWER ADJUSTMENT
Adjust closer size according to chart on the bottom
CC: Counterclockwise C: Clockwise
*: Factory Pre-set 2-5 Model
