DIGITAL HYGROMETER AND DIGITAL THERMOMETER

(1)

(2)

z

The Air Humidity Meter PCE-TH 5 is a universal temperature / humidity gauge which allows the measurement of both the ambient temperature and the ambient humidity, as well as the determination of the dew point and wet bulb temperature. Because of the data-hold function you can store a measurement in the display. The easy to read display also shows the Min, Max and Average measurement. The pocket humidity comes manufacturer calibrated.

- Temperature measuring range: -20 ... 50°C / -4 ... 122°F - Humidity measuring range: 0 ... 99.9% r.H.

- Resolution: 0.1°C / 0.18°F, 0.1% relative humidity - Measurement accuracy: ±3% r.H. / ±0.6°C / 1.08°F - Calculation of dew point and wet bulb temperature

APPLICATIONs

Performance Standards

MODEL: PCE-TH 5

DIGITAL HYGROMETER AND DIGITAL THERMOMETER

PCE-444 is a combination digital hygrometer and digital thermometer used to measure air temperature, relative humidity, dew point

temperature and wet bulb temperature. This portable handheld pocket-sized mini thermo-hygrometer allows for the quick and easy determination of indoor ambient environmental conditions.

- Humidity measuring range: 0 ... 100% relative humidity (RH) - Temperature measuring range: -20 ... 70°C / -4 ... 158°F - Resolution: 0.1%, °C, °F

APPLICATIONs

MODEL: PCE-444

z

The air humidity meter is a measuring device for orienting measurement of temperature and relative humidity. With a temperature measuring range of -10 ... 50 °C and a humidity measuring range of 20 ... 90% RH the air humidity meter covers a wide range of tasks.

- Measuring range temperature: -10 ... 50 °C / 14 ... 122 °F - Measuring range humidity: 20 ... 90% RH

- Selectable units

- Various measuring functions

APPLICATIONs

MODEL: PCE-PTH 10

(3)

z

The PCE-HT 71N Air Humidity Meter detects air temperature and humidity and stores readings in its internal memory. The Air Humidity Meter has a compact format and a wide memory capacity (up to 32,000 values / 16,000 values for each parameter) and it is mainly used as a data logger in fields such as supermarket refrigeration units, refrigerated transport, warehouses, and other temperature controlled environments.

- Measurement range: 0 ... 100% RH / -35 ... 70°C / -31 ... 176°F - Accuracy: ± 3% RH (20 ... 80%) and ± 5% / ± 1°C (1.8°F) - Resolution: 0.5% RH / 0.1°C (0.18°F)

- Memory: Max. 32,000 measurement data (16,000 for each parameter (humidity / temperature)

APPLICATIONs

MODEL: PCE-HT 71N

PCE-555 is a combination digital hygrometer and digital thermometer used to measure relative humidity or air humidity as well as air temperature, dew point temperature and wet-bulb temperature. This portable, handheld meter allows for quick and easy detection of environmental conditions. Applications include monitoring climates of refrigerated trucks, warehouses, construction sites and HVAC installations, where excess moisture, condensation and uneven temperatures can create mold, spoilage and health hazards.

APPLICATIONs

MODEL: PCE-555

With the air humidity meter it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60

°C are possible with the air humidity meter. The air humidity meter can therefore be used universally because of its various measuring

functions to determine the ambient conditions.

Measuring ranges:

APPLICATIONs

MODEL: PCE-555BT

- Humidity: 0 ... 100% RH

- Ambient temperature: -20 ... 60 °C / -4 ... 140 °F - Wet bulb temperature: 0 ... 60 °C / 32 ... 140 °F - Dew point temperature: -20 ... 60 °C / -4 ... 140 °F - Interface: Bluetooth

- MIN / MAX / HOLD function

The air humidity meter PCE-HT 112 is compact, very small and equipped with a display. The PCE-HT 112 air humidity meter records the temperature and humidity indoors with its integrated sensor and simultaneously displays it via the LCD display.

APPLICATIONs

MODEL: PCE-HT 112

Measuring function

- Temperature: -30 ... 65°C / -22 ... 149°F (Internal) -40 ... 125°C / -40 ... 257°F (external) - Humidity: 0 ... 100% RH (Internal & External) - Memory for 25,920 readings

- Saves as PDF

- Humidity measuring range: 0 ... 100 % relative humidity (rh) - Temperature measuring range: -30 ... 100°C / -22 ... 212°F - Resolution: 0.01 % rh / 0.01°C or 0.018°F

(4)

Multifunction PCE-THB 38 air humidity meter to measure a range of parameters: humidity, temperature, barometric pressure (dewpoint temperature is calculated). The air humidity meter also shows atmospheric pressure in a range of 10 to 1100hPa. With all of these features, it is a complete climatological device. The test instrument is shipped manufacturer calibrated. Otherwise, a laboratory calibration and certification can be ordered optionally to meet ISO or

requirements.

- Temperature: 0 ... 50°C / 32 ... 122°F - Relative air humidity: 10 ... 95% r.h.

- Barometric pressure: 10 ... 1100 hPa (mbar) / 0.14 psi ... 16 psi.

- Dew point temperature: -25 ... 49°C / -13 ... 120°F

APPLICATIONs

MODEL: PCE-THB 38

The refrigerator air humidity meter PCE-HT 114 has a temperature and humidity sensor on 2 m / 6.6 ft cable. The PCE-HT 114 air humidity meter records the temperature and humidity in the interior of the refrigerator and simultaneously displays it via the LCD display.

- Temperature: -40 ... 125°C / -40 ... 257°F (external) - Humidity: 0 ... 100% rh (external)

- Memory for 25,920 readings - Saves as PDF

APPLICATIONs

With the air humidity meter it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60

°C are possible with the air humidity meter. The air humidity meter can therefore be used universally because of its various measuring

functions to determine the ambient conditions.

Measuring ranges:

APPLICATIONs

MODEL: PCE-555BT

- Humidity: 0 ... 100% RH

- Ambient temperature: -20 ... 60 °C / -4 ... 140 °F - Wet bulb temperature: 0 ... 60 °C / 32 ... 140 °F - Dew point temperature: -20 ... 60 °C / -4 ... 140 °F - Interface: Bluetooth

- MIN / MAX / HOLD function - incl. sinter filter

(5)

The refrigerator air humidity meter PCE-HT 114 has a temperature and humidity sensor on 2 m / 6.6 ft cable. The PCE-HT 114 air humidity meter records the temperature and humidity in the interior of the refrigerator and simultaneously displays it via the LCD display.

- Temperature: -40 ... 125°C / -40 ... 257°F (external) - Humidity: 0 ... 100% rh (external)

- Memory for 25,920 readings - Saves as PDF

- Incl. ISO calibration certificate

APPLICATIONs Performance Standards

The temperature data logger is an independent measuring device for determining temperatures between -40 ... 125 °C. The temperature data logger is therefore particularly suitable for monitoring particularly hot environments.

- Measuring range: -40 ... 125 °C / -40 ... 257 °F

- Measurement accuracy: ± 0.2 °C (0 ... +65 °C / 32 ... 149 °F) - Resolution: 0.1 °C

- USB data logger

- Data export directly as PDF

TEMPERATURE DATA LOGGER PCE-HTD 125

Our multifunctional air humidity meter PCE-EM 883 combines all important features for measuring the ambient conditions in one device.

The air humidity meter is designed as fast as possible to determine as many parameters as possible. Due to the large number of external sensors that the air humidity meter brings with it, such fast and precise measurements are possible.

- Measurement of all relevant environmental parameters - Wind speed

- Temperature - Humidity - Sound level - Light

- High accuracy

- MIN, MAX, HOLD function

APPLICATIONs

MODEL: PCE-EM 883

(6)

DIGITAL NOISE METER/ SOUND METER

The Noise Meter / Sound Meter PCE-MSL 1 is a simple sound

measuring device. The PCE-MSL 1 noise meter / sound meter is used to quickly determine the ambient noise level. In addition to the volume measurement, the PCE-MSL 1 noise meter / sound meter also has the option of determining the ambient temperature. The measurement of background noise is important in almost every situation today.

- Measuring range: 35...135 dB - Frequency range:31.5 Hz ... 8 kHz - Accuracy: ±2 dB

- Frequency rating: A - Class II

APPLICATIONs

MODEL: PCE-MSL 1

PCE-428 is a class 2 data logging noise meter / sound meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high- accuracy noise meter / sound meter has a large easy-to-read illuminated LCD screen that displays the sound pressure level (SPL) numerically and graphically in real time. The noise meter / sound meter calculates the equivalent continuous sound level Leq (LXeq).

-Measuring range: 25 ... 136 db(A)

-LXY (SPL), Leq (LXeq), LXYSD, LXSEL, LXE, LXYmax, LXYmin, LXPeak, LXN

-Frequency weighting: A, B, C and Z

-Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)

-adjustable data-recording interval from 1 s ... 24 h

-1/1 octave band filter (optional 1/3 octave band filter upgrade) -incl. ISO Calibration Certificate

APPLICATIONs

MODEL: PCE-428

The temperature data logger has a measuring range of -80 … +70 °C.

The temperature data logger is therefore suitable for monitoring particularly cold environments.

- Measuring range: -80 ... +70 °C / -112 ... +158 °F

- Measurement accuracy: ± 0.5 °C (-30 ... +70 °C / -22 ... +158 °F) - Resolution: 0.1 °C

- USB data logger for dry ice - Data export directly as PDF

APPLICATIONs

TEMPERATURE DATA LOGGER PCE-LTD 100

(7)

The class 2 outdoor aircraft noise meter PCE-428-EKIT-ICA, from the field of environmental measurement technology, is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The outdoor aircraft noise meter is equipped with an octave band frequency filter. Optionally, the outdoor aircraft noise meter can be upgraded with a 1/3 octave band filter. The additional kit for outdoor sound measurement makes it possible to measure outdoor noise with an aircraft noise meter over a long period of time, even in the rain.

-Accuracy class 2

-A, B, C & Z frequency rating

-Fast, Slow, Pulse and Peak time weighting -Statistics function

-1/1 octave band included 1/3 octave band optional

- incl. outdoor noise level meter kit PCE-4xx-EKIT -Outdoor measurement of sound and noise -incl. ISO calibration certificate

APPLICATIONs

Model: PCE-428-EKIT-ICA

PCE-322A is a handheld, portable, professional Class II noise meter, sound meter or decibel (dB) meter with built-in data-logging or data- recording functionality. Thus, PCE-322A is ideal for real-time noise measurement as well as for long-term noise exposure monitoring over time.

-Sound measuring range: 30 ...130 dB -Resolution:0.1 dB

-Accuracy: ±1.4 dB

-Memory: Stores up to 32,700 readings -Sampling rate: 2 times per second - ISO calibration available as an option

APPLICATIONs

MODEL: PCE-322A

The PCE-428-KIT-ICA Noise Meter / Sound Meter Kit is commonly used by professionals to ensure compliance with environmental noise regulations and workplace noise permissible exposure limits. The noise meter / sound meter also functions as a data logger, recording measurements at an adjustable interval from 1 s ... 24 h and storing the recorded measurement data to a micro SD card memory.

Alternatively, the noise meter / sound meter can be connected directly to a PC via USB.

- Class 2

- Measuring range: 25 ... 136 db(A)

- LXY (SPL), Leq (LXeq), LXYSD, LXSEL, LXE, LXYmax, LXYmin, LXPeak, LXN

- Frequency weighting: A, B, C and Z

- Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)

- adjustable data-recording interval from 1 s ... 24 h

- 1/1 octave band filter (optional 1/3 octave band filter upgrade) - Kit includes type 2 / class 2 acoustic calibrator (PCE-SC 42) - incl. ISO Calibration Certificate for PCE-428 and ISO Calibration

Certificate for PCE-SC 42

APPLICATIONs

MODEL: PCE-428-KIT-ICA

(8)

The noise meter / sound meter PCE-322ALEQ is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring. The PCE-322ALEQ noise meter / sound meter has a logger function, which allows storage of up to 32700 readings.

-Automatic range: 30 ... 130 dB

-Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB -Resolution: 0.1 dB

-Accuracy: ±1.4 dB

-Memory capacity: 32700 values -incl. software for LEQcalculation

-Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.

APPLICATIONs

MODEL: PCE-322ALEQ

The class 1 noise meter PCE-430-SC 09-ICA meets all requirements for noise measurement and frequency analysis. This integrating precision pulse noise meter complies with all applicable standards and guidelines

- Accuracy class 1

- A, B, C & Z frequency weighting

- Fast, Slow, Impulse and Peak time weighting - Statistics function

- 1/1 octave band included - 1/3 octave band optional

- Incl. class 1 sound calibrator (for verification only) -Incl. ISO calibration certificate

APPLICATIONs

MODEL: PCE-430-SC 09-ICA

PCE-430 is a class 1 data-logging noise meter / sound meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high- accuracy sound level meter has a large easy-to-read illuminated LCD screen that displays the sound pressure level (SPL) numerically and graphically in real time.

-Measuring range: 22 ... 136 db(A) -A, B, C and Zfrequency weightings

-Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)

-Adjustabledata-recording interval from 1 s ... 24 h

-1/1 octave band filter (optional 1/3 octave band filter upgrade)

APPLICATIONs

MODEL: PCE-430

(9)

PCE-432 is a class 1 data-logging noise meter / sound meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high- accuracy sound level meter is equipped with GPS functionality, allowing measured values to be assigned to an exact geographic location.

-Measuring range: 22 ... 136 db(A) -A, B, C and Z frequency weightings

-Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)

-Adjustabledata-recording interval from 1 s ... 24 h

-1/1 octave band filter (optional 1/3 octave band filter upgrade)

APPLICATIONs

MODEL: PCE-432

Road and traffic noise and the resulting burden on people is increasing more and more. To check this road noise with a meter, the outdoor PCE-430-EKIT can be used. The traffic noise kit comprises the noise meter PCE-430 and a waterproof accessory kit, which allows outdoor use for road noise measurement. The Class 1 outdoor noise meter PCE-430-EKIT meets all requirements for noise measurement and frequency analysis. This integrating precision pulse noise meter follows all valid standards and guidelines.

APPLICATIONs

MODEL: PCE-430-EKIT

-Accuracy class 1

- A, B, C & Z frequency rating

- Fast, Slow, Pulse and Peak time weighting - Statistics function

- 1/1 octave band included - 1/3 octave band optional

- Incl. Outdoor Alarm Noise Meter Kit PCE-4xx-EKIT - Outdoor measurement of road noise / traffic noise

The data-logging noise meter / sound meter is used to determine volume. The PCE-NDL 10 data-logging noise meter / sound meter is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter.

In addition, the data-logging noise meter / sound meter has an SD card slot that enables the use of an SD card as an additional storage medium.

-Measuring range: SPL: Auto 30 ... 130 dB - Resolution: 0.1 dB

- Low sampling rate

-Automatic or manual storage -Selectable storage interval - Backlit LC display

-Dose measurement or SPL measurement

APPLICATIONs

MODEL: PCE-NDL 10

(10)

is used for permanent monitoring of the sound level. In addition to storing the measured values, the PCE-SLD 10 noise meter is able to display the measured values on a display and output them as a 4 ...

20-mA analog value.

APPLICATIONs

- Measuring range: 30 ... 130 dB

- Measurement accuracy: Based on class 2 according to IEC61672 - Resolution: 0.1 dB

- LC display

- SD card memory up to 16 GB - external microphone

- Analog output with 4 ... 20-mA

PCE-SDL 1 is a class 2 (type 2) data-logging sound level meter, sound pressure level (SPL) meter, noise meter or decibel (dB) meter used for long-term acoustic measurements.

APPLICATIONs

MODEL: PCE-SDL 1

- Measuring range:30 ... 130 dB - Accuracy: ± 1.4 dB

- Frequency: 31.5 Hz ... 8 kHz - Frequency weighting: A and C

- Memory: Stores up to 129,920 data sets or 36 hours at 1-sec interval - Includes USB interface and Windows-compatible software for data

transfer to PC

The outdoor construction noise meter PCE-432 is used to measure the noise on building sites. This outdoor construction noise meter meets the requirements of class 1 sound level meters. In addition to the analysis of the building noise in octave band or optionally in 1/3 octave band, the construction noise meter is able to determine the exact position of the sound level meter via GPS. The measuring range of the outdoor construction noise meter extends from 25 ... 136 dbA at a building noise frequency between 20 Hz and 12.5 kHz

-Accuracy class 1 - GPS function

- A, B, C & Z frequency rating

- Fast, Slow, Pulse and Peak time weighting - Statistics function

- 1/1 octave band included - 1/3 octave band optional

- Incl. Outdoor Alarm Noise Meter Kit PCE-4xx-EKIT - Outdoor measurement of construction noise

APPLICATIONs

MODEL: PCE-432-EKIT

The noise meter is a sound meter with an adjustable measuring range of 30 ... 130 dB. The measured values are displayed on the noise meter as a normal numerical value and also graphically in the measuring range set by the us

APPLICATIONs

MODEL: PCE-353N

- Measuring range: 30 ... 130 dBA, 35 ... 130 dBC - Measurement functions: Lp, LAeq, LAe, LCpeak - Accuracy: ± 1.5 dB (at 1 KHz and 94 dB)

- Class 2 with frequency weighting: A and C - Storage for 10 readings and bar graph display

THE NOISE METER PCE-SLD 10

(11)

The PCE-174 Lux Meter with memory for up to 16,000 readings is used for measuring light in industry, agriculture, and research. The Lux Meter is also used for determining illumination in the workplace, shop window displays, and by designers.

- Measurement range: 0 ... 400,000 lx - Sampling rate: 2 ... 99 sec.

- Logging function for 16,000 readings - Minimum, maximum and hold functions - Backlight display

MODEL: PCE-174

DIGITAL LUX METER/ LIGHT METER

Accurate lux meter for the industrial sector.

- Range: 40 ... 400,000 lux

- Accuracy: ± 5% of reading ± 10 digits (10,000 lux) - 3.5-digit LCD display

MODEL: PCE-172

Lux Meter PCE-170 A to 40,000 lux, internal sensor, automatic zero adjustment. The lux meter has a large measurement range, short response time and a compact housing allowing for quick, effortless one-hand operation.

- Large 5-digit LCD display

- Measurement range: 0.00 to 40,000 lux - Resolution: 0.01 lux in the range 39.99 Lux - Sensor: silicon photodiode

APPLICATIONs

MODEL: PCE-170 A

PCE-LED 20 is a lux meter with an external LED light sensor. The cable of the LED light sensor has a length of approximately 1.5 m / 4.9 ft.

- Measuring range: 40 / 400 / 4000 / 40000 / 400000 lx or fc - Measuring units (selectable): Lux (lx) or footcandle (fc)

- Accuracy: ± 3% (with a standard incandescent lamp at 2856 K and LED white light), ± 6% for other visible light sources

MODEL: PCE-LED 20

The Lux Meter LXT consists of a measurement sensor and a small wall bracket or holder with a 1.5 m / 4.9 ft cable, and a light transmitter.

The application field of the Lux Meter LXT is the continuous

measurement of daylight and light control in photo labs and production facilities, such as in the manufacturing of food and medicine.

- Measuring range: 0 ... 50000 Lux in three areas - Resolution: 0.1 lx / lx 1

- Accuracy: ± 5% of reading

APPLICATIONs

MODEL: LXT-TRM

(12)

PCE-CRM 40 is a portable handheld lux meter used to accurately measure the correlated color temperature (CCT - in Kelvin), illuminance, chromaticity, excitation purity (Pe), luminous flux (in lumens - lm), RGB and dominant wavelength of light sources such as LED, organic LED (OLED) and other forms of organic

electroluminescence (EL).

- Measuring range: 0.1 ... 150,000 lux / 0.01 ... 15,000 foot-candle - Spectral wavelength range: 360 ... 780 nm

- Display: 3.2" colour LCD - Chromaticity: Ev xy, Ev u'v'

APPLICATIONs

MODEL: PCE-CRM 40

The LXT Lux Meter consists of a flow sensor with handle and a wall bracket to 1.5 m / 4.9 ft cable, a light transmitter, and a digital display.

The main use of the Lux Meter is in the continuous light measurement and light monitoring of photo labs and production areas, such as food or drug manufacturing.

- Measuring range: 0 ... 50000 Lux in three areas - Resolution: 0.1 lx / lx 1

- Accuracy: ± 5% of reading - 4 to 20-mA analog output

APPLICATIONs

MODEL: LXT

Our multifunctional light meter PCE-EM 883 combines all important features for measuring the ambient conditions in one device. The light meter is designed as fast as possible to determine as many parameters as possible. Due to the large number of external sensors that the light meter brings with it, such fast and precise measurements are possible.

- Measurement of all relevant environmental parameters - Wind speed

- Temperature - Humidity - Sound level

- Light- High Accuracy-MIN, MAX, HOLD function

APPLICATIONs

MODEL: PCE-EM 883

(13)

DIGITAL VIBRATION METER

The vibration meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this vibration meter, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement.

- Frequency range: 10 Hz ... 1 kHz

- Measures speed, distance, acceleration in metric units only - Holds the reading after each measurement

- Easy to handle and battery operated - Standard probe: 10 mm

APPLICATIONs

MODEL: PCE-VT 1100

The PCE-VT 1100S vibration meter is suitable for relative

measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors.

For this reason, this vibration meter is used for rapid measurement of imbalance and for checking bearing and gear conditions.

- Frequency range: 10 Hz ... 1 kHz - Measures speed, distance, acceleration

- Holds the reading after each measurement in metric units - Portable and battery operated

- Needle probe: 45 mm / 1.77 in

APPLICATIONs

MODEL: PCE-VT 1100S

The vibration meter is a measuring device for one-hand operation. This is made possible by the built-in acceleration sensor in the vibration meter. Another special feature of the vibration meter is the vibration evaluation according toISO 10816-1.

- Frequency range: 1 ... 15 KHz (HI) - Measures speed, distance, acceleration - Piezoelectric ceramic acceleration sensor - Handy and battery operated

- Standard sensor: 10 mm / 0.4 in attachment

The vibration meter is a measuring device for one-hand operation. This is made possible by the built-in acceleration sensor in the vibration meter. Another special feature of the vibration meter is the vibration evaluation according toISO 10816-1.

- Frequency range: 1 ... 15 KHz (HI) - Measures speed, distance, acceleration - Piezoelectric ceramic acceleration sensor - Handy and battery operated

- Standard sensor: 45 mm / 1.8" needle tip

APPLICATIONs

MODEL: PCE-VT 1300S

(14)

The vibration meter is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This vibration meter shows the vibration acceleration, vibration velocity and vibration displacement directly on the display. The measurement unit can be switched between the metric system and imperial units.

Measuring ranges

- Acceleration: 0.0 - 399.9 m/s² / 0.0 - 15744 in/s² - Velocity: 0.00 - 399.99 mm/s / 0.00 - 15.74 in/s - Displacement: 0.000 - 3.9 mm / 0.000 - 0.154 in - Automatic ISO 10816-3 evaluation

- Colored graphic display

APPLICATIONs

PCE-VDR 10 is a single-axis vibration meter or monitor with real-time measurement and data logging capabilities. This vibration analyzer records acceleration (m/s, g, ft/s) as well as speed (mm/s, cm/s, in/s) measurements and saves the measured data to an included SD card memory.

- Acceleration measuring range:

- 0.5 ... 199.9 m/s, 0.05 ... 20.39 g, 2 ... 656 ft/s - Speed measuring range:

- 0.5 ... 199.9 mm/s, 0.05 ... 19.99 cm/s, 0.02 ... 7.87 in/s - Frequency range: 10 ... 1000 Hz

- Analog output: 4 ... 20 mA - RS-232 and USB interface

APPLICATIONs

MODEL: PCE-VDR 10

The vibration meter is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various

measurement parameters are available for the vibration meter, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

- Acceleration: 0.0 ... 399.9 m/s² / 0.0 - 15744 in/s² - Velocity: 0.00 ... 399.9 mm/s / 0.00 - 15.74 in/s - Displacement: 0.000 ... 3.9 mm / 0.000 - 0.154 in - Automatic ISO 10816-3 evaluation

- Data logger: 50 memory locations with 43200 measured values each -FFT analysis

- Route measurement - Rechargeable battery - Color graphic display

APPLICATIONs

(15)

The 4-channel PCE-VM 5000 Vibration Meter performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration measuring device is able to record vibrations at different points of the component to be tested.

- 4 channels / inputs

- Frequency range: 10 Hz ... 1 kHz

- Measurement of acceleration, velocity and displacement - Connection of up to 4 sensors simultaneously, 2 included - Data storage on SD card

- Sampling rate: min. 1 sec.

APPLICATIONs

MODEL: PCE-VM 5000

(16)

z

The analytical balance PCE-MA 50X is an innovative solution for the fast and highly accurate determination of moisture in a wide variety of materials. The precision weighing scale uses weighing technology from the analytical balance range and is operated in combination with a drying chamber.

- Weighing range: 50 g / 0.11 lbs

- Readability:0.1 mg = 0.0001 g / 0.0001%

- Especially for very dry samples such as ABS / PET etc.

- Drying temperature max.160°C / 320°F

- Database with drying parameters for eg ABS, Crastin, Aramid...

- Stores the measurement data of the last 5,000 drying cycles - Automatic chamber opens and closes without contact - Non-contact control thanks to IR sensors

- Quickly import and export stored data using a USB flash drive

APPLICATIONs

ANALYTICAL BALANCE PCE-MA 50X

The analytical balance is a high-precision analytical balance with a measuring range of up to 220 g. A special feature of the analytical balance is the large LCD touch screen. Amongst other functions, the analytical balance can perform piece counting, percent weighing and density determination.

- Measuring range: 0 ... 220 g - Resolution: 0.1 mg

- Accuracy: ± 0.5 mg - 5" Touchscreen - Windshield

- RS232 data interface - Calibration: internal

APPLICATIONs

ALYTICAL BALANCE PCE-ABT 220

z

With a resolution of 0.1 mg, this analytical balance is ideally suited for checking small samples for their weight. For example, powder can be weighed with the analytical balance. Typical areas of application for the analytical balance are therefore in laboratories or in research facilities.

- Measuring range: 0 ... 220 g - Resolution: 0.1 mg

- Measurement accuracy: ±0.5 mg - Windbreak

- RS232 data interface

APPLICATIONs

ANALYTICAL BALANCE PCE-ABT 220L

ANALYTICAL BALANCES/ WEIGHING

EQUIPMENT

(17)

PCE-MA 110 is an analytical balance or halogen moisture analyzer that functions on the gravimetric or loss on drying (LOD) principle. The moisture analyzer uses the halogen method to dry the material

sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the moisture analyzer can be performed at any time using the automatic calibration function and the included 100 g weight.

APPLICATIONs

ANALYTICAL BALANCE PCE-MA 110

The analytical balance PCE-MA 200 is used to weigh a range of substances up to 200g / 7.05oz and measure their moisture content. A halogen lamp heats up the chamber to 199 °C / 390 °F. The analytical balance dries the substance to be weighed within the heating chamber and determines the moisture content from the difference in weight.

APPLICATIONs

ANALYTICAL BALANCE PCE-MA 200

- Testing or weighing capacity: 200 g / 7.05 oz - Readability: 1 mg / 0.001 g

- Adjustable drying temperature and time - Accuracy to 0.01 %

The Analytical Balance PCE-BS 300 is a light, rugged precision balance suitable for different purposes. The removable stainless steel pan allows the laboratory balance to be cleaned easily. The Analytical Balance PCE-BS 300 can be used for weighing as well as for piece counting.

APPLICATIONs

Performance Standards

ANALYTICAL BALANCE PCE-BS 300

- Weighing capacity: Max. 300 g/ 0.66 lb/10.58 oz - Readability (g): 0.01

- Repeatability (g): 0.01 - Calibratable

- Weighing range: 0.01 g ... 110 g / 0.0035 ... 3.88 oz - Weighing resolution or readability: 0.1 g / 10 mg - Moisture content measuring range: 0 ... 100%

- Moisture content resolution or readability: 0.1%

- Adjustable drying time and temperature - Memory stores up to 16 drying profiles

z

The analytical balance PCE-MA 100 allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the

analytical balance dries the material to be weighed, and then calculates the moisture content from the weight difference.

- Testing or weighing capacity: 110 g / 3.88 oz - Readability: 1 mg / 0.001 g / 0.01 %

- Adjustable drying temperature and time

APPLICATIONs

ANALYTICAL Balance PCE-MA 100

(18)

Analytical Balance PCE-BT 200 to be used in Laboratories, production, quality controls, etc. Some important aspects of the Analytical Balance are both its design consisting on a flat surface and also it is very easy to use.

- Capacity [Max]: 210 g - Readability [d]: 0.001 g - Calibratable

ANALYTICAL BALANCE PCE-BT 200

- Weighing capacity: Max. 3000 g - Readability (g): 0.1

- Repeatability (g): 0.1 - Calibratable

APPLICATIONs

- Weighing capacity: Max. 6000 g - Readability: 1 g

- Repeatability: 1 g - Accuracy: ± 3 g - Calibratable

APPLICATIONs

Performance Standards

The analytical balance scale is a scale for daily laboratory use.

Another function besides the normal measurement function of the analytical balance scale is the piece counting function. This function allows the analytical balance scale to determine the number of screws, for example.

- Measuring range: 0 ... 310 g - Resolution: 0.001 g

- Piece counting function - RS-232 interface - External calibration

APPLICATIONs

ANALYTICAL BALANCE SCALE PCE-BSK 310

(19)

Analytical Balance PCE-BT 2000 to be used in Laboratories, production, quality controls, etc. Some important aspects of the Analytical Balance are both its design consisting on a flat surface and also it is very easy to use.

- Capacity [Max]: 2100 g - Readability [d]: 0.01 g - Calibratable

ANALYTICAL BALANCE PCE-BT 2000

PCE-DMS 200 is a GSM paper basis weight balance or scale used to accurately determine the basis weight (in relation to a square meter of material) of paper, cardboard, fabric, textiles and more directly in g, g/m², oz or oz/yd².

- Weighing ranges: 0 ... 200 g, 0 ... 20,000 g/m², 0 ... 7.05 oz or 0 ... 589.87 oz/yd²

- Weighing units can be changed with just the push of a button - 10 cm round pan for weighing up to 13 cm circle cut samples

APPLICATIONs

GSM PAPER BASIS WEIGHT BALANCE PCE-DMS 200

PCE-PCS 6 is a counting scale or balance with accurate weighing and piece or part counting functions. Ideal for use in laboratory, office, inventory and miscellaneous industrial applications, this portable scale can be powered by battery or by the included electric power supply.

The scale's built-in RS-232 port enables data transfer and printing.

- Weight range: 0.1 ... 6000 g / 6 kg (metric only) - Readability: 0.1 g

- Repeatability: ± 0.1 g - TARE range: 100 %

- Memory positions for reference weight: 99

APPLICATIONs

COUNTING SCALE PCE-PCS 6

This GSM Paper Basis Weight Balance was specially designed for the measurement of basis weight. Thanks to this GSM Paper Basis Weight Balance, basis weight measurements can be carried out and evaluated within a very short time.

- Measuring range: 0 ... 310 g / 0 ... 31,000 g / m² - Resolution: 0.01 g / 1 g / m²

- RS-232 interface

- Piece counting function, weight per unit area - Battery operation for mobile use

APPLICATIONs

GSM PAPER BASIS WEIGHT BALANCE PCE-DMS 310

(20)

The counting scale is a balance with two integrated weighing platforms in one measuring device. These are two different weighing platforms with different specifications.

- Platform 1 measuring range:25 kg / 55 lbs - Platform 2 measuring range:1 kg / 2.2 lbs - Two integrated weighing surfaces

- Piece counting function - Different interfaces

- Connection of another load cell possible

APPLICATIONs

COUNTING SCALE PCE-DPS 25

The counting scale of the PCE-TB C series is a real professional aid for any counting task. The counting scales have an internal data memory for up to 1,000 items that can easily be stored, e.g. they can be retrieved with a scanner.

- Weighing range: 1.5 kg - Readability: 0.05 g

- Weighing plate:300 x 210 mm (stainless steel) - Calibratable

APPLICATIONs

COUNTING Scales PCE-TB 1,5C

(21)

Infrared Thermometer with LCD for continuous measurement of surface temperature of all solid materials, designed for fixed installation.

- Temperature range: -40 ... 600 °C / -40 ... 1112 °F - Accuracy: ± 1% or ± 1°C / 1.8°F

- Optical resolution: 15:1

- Storage conditions: -40 ... 85°C / -40 ... 185°F - Spectral range: 8.0 ... 14 µm

- Emissivity: 0.100 - 1.000 adjustable in digital mode, by units of 0.001

- Outputs: analogue, USB, RS-232, RS-485, relay

APPLICATIONs

FIXED MOUNT INFRARED THERMOMETER PCE-IR10

PCE-TC 29 is an infrared thermometer imaging camera used for visual inspection and non-contact infrared (IR) temperature measurement.

Ideal for industrial use in electrical, mechanical, and building

installations (such as in the auditing of machines, engines, or heating, ventilation, and air conditioning (HVAC) systems), this affordable infrared imager captures and saves 60 x 60 pixel IR resolution images to the included MicroSD card memory.

-IR Resolution: 60 x 60 pixels

- Temperature measuring range: -20 ... 300 °C / -4 ... 572 °F - IR image, visual image, picture-in-picture

- Hot / cold spot localisation - Field of view: 20 x 20 °

- Adjustable emissivity from 0.1 ... 1.0 - Frequency image recording: 6 Hz - Data storage: Micro SD

APPLICATIONs

INFRARED THERMOMETER PCE-TC 29

INFRARED THERMOMETER AND IMAGING CAMERA

PCE-TC 28 is an infrared thermometer designed for non-contact temperature measurement. This infrared thermometer has adjustable emissivity and captures infrared images. This infrared thermometer also can take normal pictures, as well as a mixture of both normal and infrared, due to the built-in digital camera.

- Measurement range: -20 ... 300°C / -4 ... 572°F - Accuracy: ± 2%, ± 2°C / 3.6°F

- Frequency image recording: 9 Hz - Camera: 32 x 31 Pixel

APPLICATIONs

INFRARED THERMOMETER PCE-TC 28

(22)

The Infrared Thermometer PCE-779N measures temperatures quickly and without contact. The infrared thermometer can be used for almost all surfaces. The emissivity of the infrared thermometer is adjustable over the range of 0.1 ... 1.0. The infrared thermometer has various measurement functions such as max, min and average measurement - OLED-Display

- Measuring range: -60 ... 760 °C / -76 ... 1400 °F

-Additional thermocouple measurement -64 ... 1400 °C / -83.2 ...

2552 °F - Dual Laser

- Resolution: 0.1 °C / 0.18 °F at -83.2 ... 999.9 °C (-117.8 ... 1831.8

°F), otherwise 1 °C / 1.8 °F

APPLICATIONs

INFRARED THERMOMETER PCE-779N

Infrared thermometer for temperatures up to + 500 °C. The measured data can be stored and snet to a computer later on, but the main significant feature of this infrared thermometer is the built-in printer.

This makes the test instrument very attractive for use in food applications. As all test equipment, this infrared thermometer is delivered manufacturer calibrated and can additionally be certified to ISO.

- Temperature range: -40 to 500 °C / -40 ... 932 °F - Resolution: 0.1 °C / 0.18 °F

- Accuracy: ±2 % of reading or ±2 °C / 3.6 °F -Optical resolution:8:1

- Emissivity: 0.3 to 1.0 (adjustable) - Interface: RS-232

- Display: LCD

APPLICATIONs

INFRARED THERMOMETER PCE-JR 911

Infrared thermometer PCE-670 for non-contact measurement of surface temperature. The PCE-670 infrared thermometer has a display of the current temperature during the measurement. Within one second you get the surface temperature - the non-contact measuring method even from hot, dangerous or difficult to reach objects.

- IR temperature measuring range: -33 ... 500°C / -27.4 ... 932°F - Accuracy: ± 2% of v. Mw. or ± 2°C / 3.6°F

- Measured value display optionally in °C or °F - Measurement spot ratio 9: 1

INFRARED THERMOMETER PCE-670

The infrared thermometer measures the temperature of surfaces non- destructively and from a greater distance using an infrared beam. This lightweight infrared thermometer is characterized by the simplest operation and the red sighting aid.

- Temperature measuring range: -30 ... +260 °C / -22 ... 500 °F - Measuring spot (measuring distance to measuring spot size):

8:1

- Resolution: 0.1 °C

-Measured value display either in °C or °F - Fixed emissivity

- Measuring spot ratio 8:1

APPLICATIONs

INFRARED THERMOMETER PCE-777N

(23)

The PCE-675 infrared thermometer has a 13:1 spot-to-spot ratio and can accurately measure surface temperatures and ambient humidity over a very long distance. The infrared thermometer is universally applicable.

- Measuring range infrared: -50 ... 550 °C - Thermoelement Type-K: -50 … 850 ºC

- Measuring range air temperature: -20 … 60 ºC - Measuring range humidity: 0 … 100 % r.H.

- Measuring range dew point: -20 … 60 ºC - Measuring range wet bulb temp.: -20 … 60ºC

APPLICATIONs

INFRARED THERMOMETER PCE-675 INCL.

TYPE K

The Digital Infrared Thermometer PCE-780 consists of an infrared thermometer and an integrated humidity meter. With the two sensors, it can record values to determine the dew point. If this dew point is reached or undershot, there is a risk of moisture settling and thus of mould.

- Infrared measurement range: -76 ... 932°F / -60 ... 500°C - Infrared temperature measurement

- Air temperature and humidity measurement - Calculation of dew point

- High contrast LCD display - Adjustable high and low alarm

DIGITAL INFRARED THERMOMETER PCE-780

The infrared thermometer PCE-894 with double laser has a temperature range of -50 ... 1850°C / -58 ... 3362°F. The infrared thermometer PCE-894 has an optical resolution of 50: 1 and enables a precise, non-contact temperature measurement of very small areas.

- Temperature range from -50 ... 1850°C / -58 ... 3362°F - Adjustable emissivity

- Short response time of 150 ms - With thermocouple input - Bluetooth interface

APPLICATIONs

INFRARED THERMOMETER PCE-894

The infrared thermometer is suitable for private and industrial use because of its price-performance ratio. An infrared thermometer is a contactless measuring device. The bright laser dots from infrared instruments are clearly visible and provide easier temperature measurement from a distance.

- Optical resolution 30:1

- Measuring range of -50 ... 1000 °C /-58 ... 1832 °F - Maximumvalue display

- Adjustable emissivity

APPLICATIONs

INFRARED THERMOMETER PCE-889B

(24)

PCE-IR 100 is both an infrared thermometer for measuring surface temperature and a contact thermometer with probe for measuring core temperature of food. This food-grade thermometer allows for quick and easy testing of food surface temperatures without contamination using the infrared sensor, while also offering the possibility of testing food internal temperatures using the food-quality sensor probe.

- Infrared temperature range: -33 ... 220 ºC / -27 ... 428 ºF - Probe temperature range: -55 ... 330 ºC / -67 ... 626 ºF - Resolution: 0.2 ºC / 0.36 ºF

- IP 65 ingress protection rating allows hygienic cleaning

APPLICATIONs

FOOD INFRARED THERMOMETER PCE-IR 100

With the Infrared Thermometer PCE-IR 50, surface temperatures can measured quickly and easily. The measuring range of the Infrared Thermometer is 0 ... 500 °C / 32 ... 932 °F. The measured temperature is output as a 4 ... 20-mA standard signal which means that the

Infrared Thermometer can be easily integrated into different monitoring systems, including those in different production processes or food storage as well as the monitoring of electronic systems.

- Measurement range: 0 ... 500 °C / 32 ... 932 °F - Accuracy: ± 1.5 °C or ± 1 %

- Optical resolution: 15:1

- Output signal: 4 ... 20-mA standard signal - For fixed installation (mounting bracket incl.)

APPLICATIONs

INFRARED THERMOMETER PCE-IR 50

PCE-IR 1300 is a high-temperature infrared (IR) thermometer gun or pyrometer ideal for use in steel, metal and ceramic mold casting and other high-temperature industrial applications. The pyrometer's internal memory stores up to 2000 measurement protocols. The device

includes a USB port, data cable and Windows-compatible software for quick and easy data transfer to a PC.

- Measurement range: 0 ... 1300°C / 32 ... 2372°F

- Accuracy: ± 2°C / 3.6°F, 0 ... 200°C / 32 ... 392°F, ± 1%, 200 ...

1300°C / 392°F ... 2372°F - Optical resolution: 120:1 - Spectral range: 8 ... 14 µm

- Adjustable emissivity: 0.100 ... 1.000

APPLICATIONs

INFRARED THERMOMETER PCE-IR 130

(25)

The Infrared Thermometer PCE-PI 400 is a fully radiometric operating device for recording and display of temperature-based images and temperature-based profiles of the object in operates on. The Infrared Thermometer PCE-PI 400 does not only work with the latest

technology due to its USB 2.0 interface, which allows a real-time thermographic imaging with 96 images per second and simultaneous image-recording with 32 Hz, but it also efficient due to stationary as well as portable application.

- Measurement range: 0 ... 1300°C / 32 ... 2372°F

- Accuracy: ± 2°C / 3.6°F, 0 ... 200°C / 32 ... 392°F, ± 1%, 200 ...

1300°C / 392°F ... 2372°F - Optical resolution: 120:1

- Spectral rangea- Detector with 382 x 288 pixels

- Infrared camera in real time with up to 80 Hz,- Excellent thermal sensitivity

- USB 2.0 interface8 ... 14 µm

- Adjustable emissivity: 0.100 ... 1.000

APPLICATIONs

INFRARED THERMOMETER PCE-PI 400