MACRON DYNAMICS, INC.

(1)

MA

CR

ON CONVEY

(2)

Roller Bed

Aluminum Roller

Roller Bed

_Gate

Wall Support

Double-Deck

Conveyor

Double-Deck

_Conveyor

(3)

MA

CR

ON CONVEY

ORS

MACRON CLEANLINE CONVEYORS

ALUMINUM ROLLER CONVEYORS

Specifically

Designed for

Commercial and

(4)

68 MA

CR

ON CONVEY

ORS

MACRON CLEANLINE CONVEYORS

All straight sections are 10’ long, shorter lengths

are available upon request.

The frame provides for a “rollers high”

configuration which enables the conveying of

material wider than the conveyor bed.

Conveyors of type HH do not have guard rails.

Conveyors of type LL have high guard rails.

Conveyors of type TT have low guard rails.

Type TH conveyors have a low guard rail on one

side of the conveyor and no guard rail on the

other side.

Type LH conveyors have a high guard rail on one

side of the conveyor and no guard rail on the

other side.

Type LT conveyors have a high guard rail on one

side of the conveyor and low guard rail on the

other side.

1-5/32” diameter aluminum rollers have clear

anodized finish. Bearings have polypropylene

case with stainless steel balls and springs.

Recommended for use in wet applications.

Roller capacity is 15 pounds.

Plastic rollers available upon request.

(5)

MA

CR

ON CONVEY

ORS

CLEAN APPEARANCE DESIGN

1 EXTRUDED ALUMINUM H-FRAME WITHOUT INTEGRAL GUARD RAIL

2 ALL-ANODIZED FINISH

3 EXTRUDED ALUMINUM L-FRAME WITH INTEGRAL GUARD RAIL

4 ALUMINUM ROLLER WITH SPRING-LOADED ALUMINUM AXLE

5 2 1/2” WIDE EXTRUDED ALUMINUM CROSS MEMBER

(6)

70 MA

CR

ON CONVEY

ORS

STRAIGHT SECTIONS

OVERALL FRAME (A) ROLLER

CENTERS CATALOG NUMBER

WEIGHT (lbs.) 1.5" CL090-10151 40 2.4" CL090-10241 33 3.0" CL090-10301 31 4.8" CL090-10481 28 6.0" CL090-10601 26 1.5" CL120-10151 42 2.4" CL120-10241 33 3.0" CL120-10301 30 4.8" CL120-10481 26 6.0" CL120-10601 24 1.5" CL140-10151 45 2.4" CL140-10241 35 3.0" CL140-10301 31 4.8" CL140-10481 27 6.0" CL140-10601 25 1.5" CL180-10151 52 2.4" CL180-10241 39 3.0" CL180-10301 35 4.8" CL180-10481 29 6.0" CL180-10601 27 1.5" CL240-10151 62 2.4" CL240-10241 45 3.0" CL240-10301 40 4.8" CL240-10481 33 6.0" CL240-10601 30 1.5" CL300-10151 75 2.4" CL300-10241 54 3.0" CL300-10301 48 4.8" CL300-10481 40 6.0" CL300-10601 36 24 1/4" 30 1/4" 9 1/4" 12 1/4" 13 3/4" 18 1/4" OVERALL FRAME (A) ROLLER

(7)

MA

CR

ON CONVEY

ORS

STRAIGHT SECTIONS

(8)

72 MA

CR

ON CONVEY

ORS

WEIGHT (lbs.) 1.5" CL093-10151 41 2.4" CL093-10241 34 3.0" CL093-10301 32 4.8" CL093-10481 29 6.0" CL093-10601 27 1.5" CL123-10151 46 2.4" CL123-10241 37 3.0" CL123-10301 34 4.8" CL123-10481 30 6.0" CL123-10601 28 1.5" CL143-10151 49 2.4" CL143-10241 39 3.0" CL143-10301 35 4.8" CL143-10481 31 6.0" CL143-10601 29 1.5" CL183-10151 56 2.4" CL183-10241 43 3.0" CL183-10301 39 4.8" CL183-10481 33 6.0" CL183-10601 31 1.5" CL243-10151 66 2.4" CL243-10241 49 3.0" CL243-10301 44 4.8" CL243-10481 37 6.0" CL243-10601 33 1.5" CL303-10151 76 2.4" CL303-10241 55 3.0" CL303-10301 49 4.8" CL303-10481 41 6.0" CL303-10601 37 24 1/4" 30 1/4" 9 1/4" 12 1/4" 13 3/4" 18 1/4" Conveyor

Width A B Catalog No. WT. (lbs.) 9.25" 9" 8.25" CL096-00000 0.50 12.25" 12" 11.25" CL126-00000 0.75 13.75" 13.5" 12.75" CL146-00000 0.75 18.25" 18" 17.25" CL186-00000 1.0 24.25" 24" 23.25" CL246-00000 1.5 30.25" 30" 29.25" CL306-00000 2.0

STRAIGHT SECTIONS

END STOPS

(9)

MA

CR

ON CONVEY

ORS

Conveyor Width Inner Radius Outer Radius Outer Roller Centers No. Rollers Type of Frame Weight (lbs.) Catalog Number HH 28 CL090-90261 LH 32 CL091-90261 LL 36 CL092-90261 LT 34 CL093-90261 TT 32 CL094-90261 TH 30 CL095-90261 HH 27 CL120-90301 LH 29 CL121-90301 LL 32 CL122-90301 LT 30 CL123-90301 TT 30 CL124-90301 TH 30 CL125-90301 HH 29 CL140-90341 LH 31 CL141-90341 LL 33 CL142-90341 LT 31 CL143-90341 TT 31 CL144-90341 TH 31 CL145-90341 HH 29 CL180-90221 LH 31 CL181-90221 LL 33 CL182-90221 LT 31 CL183-90221 TT 31 CL184-90221 TH 31 CL185-90221 HH 42 CL180-90381 LH 46 CL181-90381 LL 50 CL182-90381 LT 54 CL183-90381 TT 58 CL184-90381 TH 57 CL185-90381 HH 40 CL240-90401 LH 42 CL241-90401 LL 44 CL242-90401 LT 42 CL243-90401 TT 42 CL244-90401 TH 42 CL245-90401 HH 54 CL300-90521 LH 56 CL301-90521 LL 60 CL302-90521 40" 49" 3.0" 26 30 3.0" 60" 48" 54" 67 1/2" 3.0" 34 22 3.6" 54" 36" 38 2.4" 58" 40" 40" 64" 2.4" 40 50" 80" 2.4" 52 18 1/4" 24 1/4" 30 1/4" 9 1/4" 12 1/4" 13 3/4" 18 1/4"

CURVE SECTIONS

90º CURVES

Curve frames which are a

(10)

74 MA

CR

ON CONVEY

ORS

Conveyor Width Inner Radius Outer Radius Outer Roller Centers No. Rollers Type of Frame Weight (lbs.) Catalog Number HH 14 CL090-45131 LH 16 CL091-45131 LL 18 CL092-45131 LT 17 CL093-45131 TT 16 CL094-45131 TH 15 CL095-45131 HH 15 CL120-45151 LH 17 CL121-45151 LL 19 CL122-45151 LT 18 CL123-45151 TT 17 CL124-45151 TH 16 CL125-45151 HH 16 CL140-45171 LH 18 CL141-45171 LL 20 CL142-45171 LT 19 CL143-45171 TT 18 CL144-45171 TH 17 CL145-45171 HH 16 CL180-45111 LH 18 CL181-45111 LL 20 CL182-45111 LT 19 CL183-45111 TT 18 CL184-45111 TH 17 CL185-45111 HH 20 CL180-45191 LH 22 CL181-45191 LL 24 CL182-45191 LT 26 CL183-45191 TT 28 CL184-45191 TH 27 CL185-45191 HH 21 CL240-45201 LH 23 CL241-45201 LL 25 CL242-45201 LT 27 CL243-45201 TT 29 CL244-45201 TH 28 CL245-45201 HH 27 CL300-45261 LH 28 CL301-45261 LL 30 CL302-45261 LT 35 CL303-45261 TT 40 CL304-45261 TH 39 CL305-45261 40" 49" 3.0" 13 15 3.0" 60" 48" 54" 67 1/2" 3.0" 17 11 3.6" 54" 36" 19 2.4" 58" 40" 40" 64" 2.4" 20 50" 80" 2.4" 26 18 1/4" 24 1/4" 30 1/4" 9 1/4" 12 1/4" 13 3/4" 18 1/4"

Curve frames which are a

combination of side channel types

have the higher guard rail on the

outside curve. Outer rail is designated

first in type of frame.

(11)

MA

CR

ON CONVEY

ORS

SUPPORTS

Conveyor

Width Catalog Number

Inside Width A Upright Height Wt. (lbs.) Load Capacity (lbs.) 9 1/4" CL096-21272 12" 72" 10 500 12 1/4" CL126-21572 15" 72" 11 500 13 3/4" CL146-21872 18" 72" 11 500 18 1/4" CL186-22172 21" 72" 12 500 24 1/4" CL246-22772 27" 72" 12 500 30 1/4" CL306-23372 33" 72" 12 500 Conveyor

Width Catalog Number Wt. (lbs.) Load Capacity (lbs.) 9 1/4" CL096-12433 7 250 12 1/4" CL126-12433 8 250 13 3/4" CL146-12433 8 250 18 1/4" CL186-12433 9 250 24 1/4" CL246-12433 10 250 30 1/4" CL306-12433 11 250 Conveyor

Width Catalog Number Wt. (lbs.) Load Capacity (lbs.) 9 1/4" CL096-13342 8 250 12 1/4" CL126-13342 9 250 13 3/4" CL146-13342 9 250 18 1/4" CL186-13342 10 250

One pair of braces are included with each support.

Each double deck stand includes 72” uprights with footpads, two

(2)cross-member assemblies with clamps for one section of conveyor per level. One

pair of braces included with each support.

DOUBLE DECK

SINGLE DECK

_{Height Adjusts from 27” -36”}

Height Adjusts from 36”-45”

Uprights

Consist of 1” square x 1/8” wall

aluminum anodized tube. They are 6’

high with aluminum foot pads.

Cross Members

Consist of 7/8” round steel tubing with

formed vertical channel and 5/16”

square head set screw on each end for

securing.

The conveyor is mounted to the cross

member by means of clamp assemblies.

The use of these clamps allow a narrow

conveyor to be attached on wider

supports.

Widths

Six widths 12”, 15”, 18”, 21”, 27” and

33” inside clearance.

Uprights

Consist of 1” square x 1/8” wall

aluminum anodized tube with

foot pads.

Cross Members

Consist of round rigid PVC

tubing reinforced with threaded

rod.

Finish

Steel parts are zinc plated.

(12)

76 MA

CR

ON CONVEY

ORS

GATES

WALL SUPPORTS

Conveyor

Width Catalog Number (lbs.)Wt.

Load Ea. Capacity (lbs.) 9 1/4" CL096-10000 1.5 250 12 1/4" CL126-10000 1.7 250 13 3/4" CL146-10000 1.9 250 18 1/4" CL186-10000 3.0 250

Assembly fasteners are included to mount

conveyor. Bolts or screws for fastening to wall

are not included, and are to be furnished by

customer.

Width Gate Length Roller Centers Type of

Frame Catalog Number

Weight (lbs.) HH CL090-36241 14 LH CL091-36241 14 LL CL092-36241 16 LT CL093-36241 16 TT CL094-36241 18 TH CL095-36241 17 HH CL120-36241 18 LH CL121-36241 18 LL CL122-36241 20 LT CL123-36241 20 TT CL124-36241 22 TH CL125-36241 20 HH CL140-36241 23 LH CL141-36241 24 LL CL142-36241 26 LT CL143-36241 25 TT CL144-36241 25 TH CL145-36241 25 HH CL180-36241 26 LH CL181-36241 27 LL CL182-36241 28 LT CL183-36241 27 TT CL184-36241 27 TH CL185-36241 26 HH CL240-36241 26 LH CL241-36241 28 LL CL242-36241 29 LT CL243-36241 28 TT CL244-36241 28 TH CL245-36241 27 HH CL300-36241 28 LH CL301-36241 30 LL CL302-36241 31 LT CL303-36241 30 TT CL304-36241 30 TH CL305-36241 29 24 1/4" 30 1/4" 36" 36" 9 1/4" 12 1/4" 13 3/4" 18 1/4" 36" 36" 2.4" 2.4" 36" 36" 2.4" 2.4" 2.4" 2.4"