- 1 - Model: (SATA to USB+Hub+1394a) Code Description: S---SATA Harddisk. ES---ESATA Interface. U---USB2.0 Interface. F---IEEE1394 Interface







Full text




Code Description: S---SATA Harddisk ES---ESATA Interface U---USB2.0 Interface F---IEEE1394 Interface H---USB HUB R---RAID


Features ---

●Maximum transfer rate up to: 400Mbps for 1394a, 480Mbps for USB2.0

●Complies with SATA-I, SATA-II interface, transfer rate up to 1.5Gbps & 3.0Gbps ●With independent HDDs and RAID0 functions. ●Support RAID0,1,1+0, 5(*for PCI-S/ESR only). ●Support Hot-Plug & Play. No extra driver needed


I. [Parts Description]

PCI-S/ESR (See picture A)

A1—SATA Port 0 A2—SATA Port 1 A3—SATA Port 2 A4—SATA Port 3 A5—SATA Port 4 A6—eSATA Port


PCI-S/UHF (See picture B) B1—SATA Port 0 B2—SATA Port 1 B3—SATA Port 2 B4—SATA Port 3 B5—USB2.0 Port


PCI-S/UHF (See Picture C) C1—SATA Port 0 C2—SATA Port 1 C3—SATA Port 2 C4—SATA Port 3 C5—IEEE1394a Port 1 C6-- IEEE1394a Port 2 C7-- USB2.0 Port


II. [Hardware Installation]

The PCI card is arranged in pairs with ST-2350 SATA Enclosure. Before installation, make sure the SATA HDD and SATA Enclosure are able to be work. The Installation Steps are as follows:


Prepared the PCI card and SATA Enclosure ready. (See Picture D-1)

Picture D-1 Step.2

Loose the screw

& open the sideboard(See Picture D-2) and use a screwdriver to open the PCI slot plate(see D-2a).


Picture D-2 Step.3

Install PCI card to SATA Enclosure (See Picture D-3)



Connect the power cable of PCI card and mounting the PCI card on by the provided screws. (See Picture D-4)

Picture D-4 Step.5

Mount sideboard back to the SATA enclosure(See Picture D-5) and then tighten the screw.


Picture D-5 Step.6

Connect SATA data cables between PCI card and SATA Enclosure. Make sure SATA Port 0 to SATA Port 0, 1 to 1, 2 to 2, 3-3, 4-4, etc.


PCI-SUH and PCI-SUFH cards support 4 HDDs only, so SATA Enclosure will reserve one port when connecting PCI-S/UH and/or PCI-S/UFH card. (See Picture D-6)


Picture D-6 III. [Software Installation]

System requirement:

z PCI-S/ESR Support Windows 2000/xp, Windows NT, WinXP_2003 64bit

z PCI-S/UH, S/UFH Support Windows 98SE/ME/2000/XP, Mac 9.0 & higher

PCI-S/ESR card, which is arranged in pairs with Silicon lmage 3124/3132 eSATA card, supports RAID0, 1, 1+0, 5 function.


how to build RAID configuration.

Please make sure the ESATA card which you use is Silicon lmage 3124 or 3132. Then, update the BIOS and driver. Afterward, install the GUI RAID program.

As following pictures,

Steps for building Raid 0(Mirror Strip)


5.Chose the RAID configuration type you want from the “Configuration” section menu.


6.For example, To Build RAID0+1(Mirrored Striped),please see following steps. Select Max in the “Capacity” column. Select “128KB” in the “Chunk Size” section.


7.Select 4 HDDs for building

Raid0+1configuration(*When you build the Raid with 4 HDDs). Click on “Create”.


8. See the following menu that RAID 0+1 configuration is completed. Close the window.


9. In the disk management, we can find the status of the total HDD size after RAID0 built.


. [PCI

Ⅳ -S/UHF Win98se Driver Installation] We need to prepare some files in Win2000 and Win98se CD.

z Windows 2000 Professional ( Use Microsoft MSDN Disc 0013.1 / April 2002 ):

1. USBSTOR.sys



z Windows 98 Second Edition install CD ( Use Microsoft MSDN Disc 2397 / October 2003 ): 1. NTMAP.sys D:\ENGLISH\WIN98SE\BASE5.CAB 2. NTMAP.inf D:\ENGLISH\WIN98SE\PRECOPY2.CAB 3. NTMAP.cat D:\ENGLISH\WIN98SE\CATALOG3.CAB 4. NTMAPHLP.PDR



Then, copy these files to the new folder under OS Win98se (e.g. C:\Win98se_USB_driver).

When the USB cable is plugged in the PC, the system will show a message that the system finds the USB Mass Storage Device.


Select the “Specify a location :” and key-in the location (e.g. C:\Win98se_USB_driver).


Then, the system will detect the new hard disk through U92X serial product board.

The system will detect the USB device is 1394/USB Disk in the Device Manager, and will show that it needs the NTMAP.INF to install the driver in the system.


In the Device Manager, we can find the new hard disk in the Disk drives

And also can find 1394/USB Disk in the Storage device, USB Mass Storage Device in the Universal Serial Bus controllers


In the Registry Editor. We can find the new storage information in the location as below:



e.g. Hard disk model name is WD800JD-60LUA0 ( SATA II 80G )


. [PCI

Ⅴ -S/UH Win98 Driver Installation]

When the USB cable is plugged in the PC, the system will show a message that the system finds the USB Mass Storage Device.


Select the recommended mode.

Select the “Specify a location :” and key-in the location (e.g. D:\JM20336_Win98 driver).