PRO DJ LINK Setup Guide

(1)

PRO DJ LINK

Setup Guide

(2)

Contents

How to read this manual

The instructions in this manual use the indications below.

! The names of channels and buttons indicated on the product, names of menus

in the software, etc., are indicated within square brackets ([ ]). (e.g. [MASTER]

channel, [ON/OFF], [File] menu)

! The version of rekordbox for mobile devices is referred to as “rekordbox (iOS/

Android) ”.

! The version of rekordbox for Mac/Windows is referred to as “rekordbox (Mac/

Windows)”. “rekordbox” is used to indicate the versions of rekordbox and rekord-box (iOS/Android) simultaneously, as well as when referring to rekordrekord-box func-tions directly.

Before start

Purpose of this guide ...3

General description of PRO DJ LINK ...3

To make connections ...3

About trademarks and registered trademarks ...3

Connecting the CDJ-2000nexus and DJM-2000nexus/

DJM-2000

Connecting rekordbox by wireless LAN ...4

Connecting rekordbox by wired connection/Connecting a USB device or SD memory card ...7

Connecting the CDJ-2000nexus and DJM-900nexus

Connecting the CDJ-2000nexus and another mixer

Connecting the CDJ-2000/CDJ-900 and DJM-2000nexus/

DJM-2000

Connecting the CDJ-2000/CDJ-900 and DJM-900nexus

Connecting the CDJ-2000/CDJ-900 and another mixer

(3)

Before

start

Before start

Purpose of this guide

This guide describes the procedures for making the connections required to use the PRO DJ LINK functions.

General description of PRO DJ LINK

The various PRO DJ LINK functions provided by Pioneer can be achieved by connecting a PRO DJ LINK-compatible Pioneer DJ player (CDJ-2000nexus/CDJ-2000/CDJ-900), a DJ mixer (DJM-2000nexus/DJM-2000/DJM-900nexus), or a mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed by wireless LAN or by LAN cable.

The main functions that can be achieved by PRO DJ LINK are as follows:

! Music files on a variety of mediums, such as smartphones or tablets12_{, computers}2_{, USB devices or SD memory cards, can be sent by wireless signal}1_{or LAN/USB}

cable and shared/played on up to four players3_.

! The [BEAT SYNC]1_{function allows the music on up to four DJ players to be played with their tempos and beats synchronized.}

! The channel status (on air status and channel number) can be checked instantaneously.

! The quantize function makes it possible to apply beat effects in tempo with the music.

Even more functions are available when used in combination with other DJ players and DJ mixers supporting the PRO DJ LINK function. For details, see the respective play-ers’ or mixplay-ers’ operating instructions.

1_{Only supported on the CDJ-2000nexus.}2_{rekordbox must be installed.}3_{Music files on CDs or DVDs cannot be shared.}

To make maximum use of the PRO DJ LINK function

The maximum advantages of the PRO DJ LINK function can be achieved by using music files that have been analyzed with rekordbox.

Either connect a mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed directly to the DJ player, or first transfer the music files that have been analyzed with rekordbox to an SD memory card.

rekordbox can be downloaded free of charge from the following website: http://rekordbox.com/

Recommended rekordbox versions

rekordbox (iOS/Android) Ver.1.1.0 or greater, rekordbox (Mac/Windows) Ver.2.0.0 or greater

! For details on connections and operations of a mobile device or computer on which rekordbox is installed, see the rekordbox (iOS/Android) user’s manual or the rekordbox

(Mac/Windows) operating instructions.

Models supporting PRO DJ LINK

CDJ-2000nexus/CDJ-2000/CDJ-900 DJM-2000nexus/DJM-2000/DJM-900nexus

To make connections

The connection procedure for using the PRO DJ LINK function differs according to the combination of devices you are using.

This manual describes the connection procedures for different combinations of PRO DJ LINK-compatible Pioneer DJ players and DJ mixers. First check the combination of devices you are using on the table below, then connect following the description of the relevant page.

! Ex.: If you are using a CDJ-2000nexus and a DJM-2000nexus, you should follow procedure 1_{. Proceed to page}1_.

Those using a DJM-2000nexus/DJM-2000 Those using a DJM-900nexus Those using a DJ mixer other than the _{DJM-2000nexus/DJM-2000/DJM-900nexus}

Those using a CDJ-2000nexus

1

2

3

Those using a DJ player other than the

CDJ-2000nexus

4

5

6

Connecting by wireless LAN

! Use a wireless router (commercially available) and access point (commercially available) conforming to either IEEE802.11n or IEEE802.11g standards. Depending on the

signal conditions in the usage environment and the wireless router or access point, PRO DJ LINK connections may not operate properly.

In this case, we recommend changing the wireless router’s settings. For instructions on setting the wireless router, see the wireless router’s operating instructions. If the problem persists after changing the wireless router’s settings, switch to wired connections.

! For instructions on making the wireless LAN connections, see the operating instructions of your computer or wireless LAN device.

About trademarks and registered trademarks

! Pioneer and rekordbox are registered trademarks of the Pioneer Corporation.

! Microsoft®_{, Windows}®_{7, Windows Vista}®_{, Windows}®_{XP, and Windows}®_{are either registered trademarks or trademarks of Microsoft Corporation in the United States and/}

(4)

1

Connecting the CDJ-2000nexus and

DJM-2000nexus/DJM-2000

1-1

Connecting rekordbox by wireless LAN

Equipment used

! CDJ-2000nexus (1 – 4 units)

! Wireless router with internal switching hub or access point

! Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed

! DJM-2000nexus or DJM-2000

! Audio cable

! LAN cables (one for each DJ player + one more)

Connections diagram (when connecting two DJ players)

OVER POWER CD

/DIGITAL PHONO USB 1/2 TRIM CH SELECT EFFECT SELECT EFFECT FREQUENCY 1234 OFF ON MASTER LINK HEADPHONES MIC INST FX MIDI CURVE SETTING 10 7 4 2 1 0 - 1 - 2 - 3 - 5 - 7 - 10 - 15 - 24 dB 10 9 7 8 6 5 4 3 2 1 0 BALANCE LOW TIME LIVE SAMPLER WAKE UP LEVEL/DEPTH 1/81/41/23/41/12/14/1 MIN MAX MINMAX AUTO /TAP TAP ON/OFF ON/OFF CUE CUE CUE A B DELAY ECHO FILTER GATE ROLL TRANS REVERB MULTI TAP DELAY PHASER SLIP ROLL RETURNSEND/

REV ROLL CUE CUE NOISE JET ZIP HPF CRUSH LPF MONO ON/OFF CH EQ EQ CROSS FADER CH FADER ISOLATOR START/STOP SNAPSHOT UTILITY BOOTH MONITOR STEREO MONO SPLIT STEREO

L R

DJM-2000 - 0

LR FILTER

PARAMETER MIN MAX

OVER 10 7 4 2 1 0 - 1 - 2 - 3 - 5 - 7 - 10 - 15 - 24 dB ISO EQ/ EQ LOW MID HI +9 +6 - 0 0 LOW MIN MAX CUE MASTER PHONES LEVEL MIXING HI -26/ +6 -26/ +6 -26/ -12+12 OFF ON OVERTALK

PROFESSIONAL MIXER 10 9 7 8 6 5 4 3 2 1 0 ATHRUB ATHRUB

CROSS FADER ASSIGN ATHRUB ATHRUB CROSS FADER ASSIGN MIC LEVEL 0 -CUE FILTER MIN MAX CUE FILTER MIN MAX CUE FILTER MIN MAX -12+12 CD /DIGITALLINEUSB 3/4

OVER 10 7 4 2 1 0 - 1 - 2 - 3 - 5 - 7 - 10 - 15 - 24 dB 10 7 4 2 1 0 - 1 - 2 - 3 - 5 - 7 - 10 - 15 - 24 dB ISO

EQ/ ISOEQ/

TRIM +9 HI +6 -26/ MID +6 -26/ LOW +6 -26/ CD /DIGITALLINEUSB 5/6

TRIM +9 HI +6 -26/ MID +6 -26/ LOW +6 -26/ OVER 10 7 4 2 1 0 - 1 - 2 - 3 - 5 - 7 - 10 - 15 - 24 dB ISO EQ/ CD /DIGITAL PHONO USB 7/8

TRIM +9 HI +6 -26/ MID +6 -26/ LOW +6 -26/ OVER MICABM MID MIN MAX HI MIN MAX MIDI MIX REMIX CDJ-2000nexus DJM-2000 CDJ-2000nexus Audio cable LAN cable (wired) Wireless

Connection procedure

Creating the

[PLAYER N

o.] setting

1 Check that no mobile devices, USB devices or SD memory cards are connected to the DJ players, then turn on the power of the

DJ players and the DJ mixer before connecting the LAN cables.

! The [PLAYER No.] setting cannot be changed if a mobile device, USB device or SD memory card is connected or if a link is established.

2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set [PLAYER No.] to [AUTO].

[PLAYER No.] setting screen

! Set the second DJ player on in the same way.

(5)

Connecting

the

CDJ-2000nexus

and

Connecting the cables (LAN cable and audio cables)

Connect the LAN cable and audio cables.

Connect in such a way that the DJ player’s [PLAYER No.], the channel number of the DJ mixer’s LAN cable insertion port and the channel number of the terminals to which

the audio cables are connected are all the same number.

Connect the wireless router/access point to [COMPUTER1] or [COMPUTER2].

Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the wireless router is connected to [COMPUTER1]

CH 2 CH 3 CH 4 CH 1SIGNAL GND CD CD L R L R PHONO

MIDI OUT USB CD LINE CONTROL OUT IN (TRS) R L R L R L R L(MONO) R L(MONO) DIGITAL

BOOTH SEND RETURN COMPUTER 1 LINK CH 3 CH 1 CH 4 CH 2 CH 2 CH 3 CH 4 CH 1 DIGITAL SIGNAL GND CD 1GND -6dB -3dB 0dB 2HOT 3COLD CD L R PHONO POWER AC IN OFF ON MASTER1 MASTER ATT.

MASTER2REC OUT

DIGITAL CD DIGITAL L R CD LINE CONTROL CD DIGITAL DJM-2000 R R CONTROL O) COMPUTER 1 LINK CH 3 CH 1 CH 4 CH 2 CD DIGITAL POWER

CONTROL POWER CONTROL

CDJ-2000nexus CDJ-2000nexus

Checking the connections

Checking the DJ player’s link established by LAN connection

Check that the player number indicated on the DJ player’s screen is lit in white.

LINK NG LINK OK

! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the

connection procedure.

Checking that the LAN cable and audio cables are synchronized

Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly.

Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator. If the numbers are different, fix the connections.

TRIM OVER 10 7 4 2 1 0 - 1 - 2 - 3 - 5 - 7 - 10 - 15 - 24 dB ISO EQ/ LOW MID HI +9 +6 -26/ +6 -26/ OVER 10 7 4 2 1 0 - 1 - 2 - 3 - 5 - 7 - 10 - 15 - 24 dB ISO EQ/ TRIM +9 HI +6 -26/ MID +6 -26/ LOW DJM-2000 CDJ-2000nexus

(6)

Checking the device(s) connected by wireless connection

1 Press the [rekordbox] button.

DISC SD USB LINK

rekordbox BROWSE TAG LIST INFO MENU

BACK TAG TRACK / REMOVE

QUANTIZE TIME MODE AUTO CUE

LINK INFO UTILITY

2 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection.

The devices that have been recognized are indicated on the DJ player’s screen.

rekordbox (iOS/Android) rekordbox (Mac/Windows)

3 Press the DJ player’s rotary selector to authorize the connection.

The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen.

Ex.: When connecting a mobile device (iOS/Android) and a computer (Mac/Windows) The connection completed screen appears.

(7)

Connecting

the

CDJ-2000nexus

and

1-2

Connecting rekordbox by wired connection/Connecting a USB device or

SD memory card

Equipment used

! USB cable (for the iPod cable, use the iPod cable included with the CDJ-2000nexus.)

! USB device or SD memory card on which music files analyzed with rekordbox are stored

! Audio cable

Connections diagram (when connecting two DJ players)

OVER POWER CD

/DIGITAL PHONO USB 1/2 TRIM CH SELECT EFFECT SELECT EFFECT FREQUENCY 1234 OFF ON MASTER LINK HEADPHONES MIC INST FX MIDI CURVE SETTING 10 7 4 2 1 0 - 1 - 2 - 3 - 5 - 7 - 10 - 15 - 24 dB 10 9 7 8 6 5 4 3 2 1 0 BALANCE LOW TIME LIVE SAMPLER WAKE UP LEVEL/DEPTH 1/81/41/23/41/12/14/1 MIN MAX MINMAX AUTO/TAP TAP ON/OFF ON/OFF CUE CUE CUE A B DELAY ECHO FILTER GATE ROLL TRANS REVERB MULTI TAPDELAY

PHASER SLIP ROLL SEND/ RETURN REV ROLL CUE CUE NOISE JET ZIP HPF CRUSH LPF MONO ON/OFF CH EQ EQ CROSS FADER CH FADER ISOLATOR START/STOP SNAPSHOT UTILITY BOOTH MONITOR STEREO MONO SPLIT STEREO

L R

DJM-2000 - 0

LR FILTER

PARAMETER MIN MAX

OVER 10 7 4 2 1 0 - 1 - 2 - 3 - 5 - 7 - 10 - 15 - 24 dB ISO EQ/ EQ LOW MID HI +9 +6 - 0 0 LOW MIN MAX CUE MASTER PHONES LEVEL MIXING HI -26/ +6 -26/ +6 -26/ -12+12 OFF ON OVERTALK

PROFESSIONAL MIXER 10 9 7 8 6 5 4 3 2 1 0 ATHRUB ATHRUB CROSS FADER ASSIGN

ATHRUB ATHRUB CROSS FADER ASSIGN MIC LEVEL 0 -CUE FILTER MIN MAX CUE FILTER MIN MAX CUE FILTER MIN MAX -12+12 CD /DIGITALLINEUSB 3/4

OVER 10 7 4 2 1 0 - 1 - 2 - 3 - 5 - 7 - 10 - 15 - 24 dB 10 7 4 2 1 0 - 1 - 2 - 3 - 5 - 7 - 10 - 15 - 24 dB ISO

EQ/ EQ/ISO

TRIM +9 HI +6 -26/ MID +6 -26/ LOW +6 -26/ CD /DIGITALLINEUSB 5/6 TRIM +9 HI +6 -26/ MID +6 -26/ LOW +6 -26/ OVER 10 7 4 2 1 0 - 1 - 2 - 3 - 5 - 7 - 10 - 15 - 24 dB ISO EQ/ CD /DIGITAL PHONO USB 7/8

TRIM +9 HI +6 -26/ MID +6 -26/ LOW +6 -26/ OVER MICABM MID MIN MAX HI MIN MAX MIDI MIX REMIX DJM-2000 CDJ-2000nexus CDJ-2000nexus Audio cable LAN cable (wired) USB connections

Connection procedure

Creating the

[PLAYER N

o.] setting

2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set [PLAYER No.] to [AUTO].

(8)

Connect in such a way that the DJ player’s [PLAYER No.], the channel number of the DJ mixer’s LAN cable insertion port and the channel number of the terminals to which

the audio cables are connected are all the same number.

Connect the computer to [COMPUTER1] or [COMPUTER2].

Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the computer (Mac/Windows) is connected to [COMPUTER1]

CH 2 CH 3 CH 4 CH 1SIGNAL GND CD CD L R L R PHONO

BOOTH SEND RETURN COMPUTER 1 LINK CH 3 CH 1 CH 4 CH 2 CH 2 CH 3 CH 4 CH 1 DIGITAL SIGNAL GND CD 1GND -6dB -3dB 0dB 2HOT 3COLD CD L R PHONO POWER AC IN OFF ON MASTER1 MASTER ATT.

MASTER2REC OUT

DIGITAL CD DIGITAL L R CD LINE CONTROL CD DIGITAL DJM-2000 R R CONTROL O) COMPUTER 1 LINK CH 3 CH 1 CH 4 CH 2 CD DIGITAL POWER

CONTROL POWER CONTROL

LINK NG LINK OK

Checking that the LAN cable and audio cables are synchronized

TRIM OVER 10 7 4 2 1 0 - 1 - 2 - 3 - 5 - 7 - 10 - 15 - 24 dB ISO EQ/ LOW MID HI +9 +6 -26/ +6 -26/ OVER 10 7 4 2 1 0 - 1 - 2 - 3 - 5 - 7 - 10 - 15 - 24 dB ISO EQ/ TRIM +9 HI +6 -26/ MID +6 -26/ LOW DJM-2000 CDJ-2000nexus

(9)

Connecting

the

CDJ-2000nexus

and

Checking the connected device(s)

1 Press one of the medium select buttons to check the connection with the respective device.

— To use a computer (Mac/Windows) connected by wired LAN: Press the [rekordbox] button.

— To use a USB device or SD memory card connected to another player that is connected by link: Press the [LINK] button.

— To use a mobile device (iOS/Android) or USB device connected by wire to the USB "A terminal": Press the [USB] button.

— To use an SD memory card: Press the [SD] button.

! The following describes examples for when the [rekordbox] button is pressed and when the [USB] button is pressed.

2 Press the [rekordbox] button.

rekordbox BROWSE TAG LIST INFO MENU

BACK TAG TRACK / REMOVE

! To use a mobile device (iOS/Android) connected by wire: Press the [USB] button.

Ex.: When connecting a computer (Mac/Windows) The connection completed screen appears.

(10)

2

Connecting the CDJ-2000nexus and

DJM-900nexus

2-1

Equipment used

! Wireless router with internal switching hub

! DJM-900nexus

! Audio cable

LEVEL USB DIGITALCD/ LINE PHONO 1/ 2 HI MIC 1 MIC 2 HI LOW EQ EQ/ 12 12 12 12 0 0 ONTALK OVER OFF SPACE NOISE CUE CUE CUE CRUSHFILTER DUB ECHOGATE/COMP

1234 B A THRU TRIM 9 6 -26/ MID 6 -26/ LOW 6 -26/ COLOR ISO OVER 10 10 9 8 7 6 5 4 3 2 1 7 4 2 1 - 1 - 2 - 3 - 5 - 7 -10 -15 -24 dB 0 HI LOW TRIM USB DIGITALCD/ LINE PHONO 7/ 8 HI EQ/ CUE B A THRU 9 6 -26/ MID 6 -26/ LOW 6 -26/ COLOR ISO OVER 10 7 4 2 1 - 1 - 2 - 3 - 5 - 7 -10 -15 -24 dB 0 HI LOW CUE TRIM USB DIGITALCD/ LINE LINE

3 /4 HI EQ/ CUE B A THRU 9 6 -26/ MID 6 -26/ LOW 6 -26/ COLOR ISO OVER 10 10 9 8 7 6 5 4 3 2 1 7 4 2 1 - 1 - 2 - 3 - 5 - 7 -10 -15 -24 dB 0 HI LOW TRIM USB DIGITALCD/ LINE LINE

5 / 6 HI EQ/ CUE B A THRU MONOSTEREO 9 6 -26/ MID 6 -26/ LOW 6 -26/ COLOR ISO OVER 10 10 9 8 7 6 5 4 3 2 1 0 0 0 7 4 2 1 - 1 - 2 - 3 - 5 - 7 -10 -15 -24 dB LdBR 0 OVER 10 7 4 2 1 - 1 - 2 - 3 - 5 - 7 -10 -15 -24 0 HI LOW EQ ISOLATOR A B

CROSS FADER ASSIGN LEVEL

POWER

BALANCE 0

AUTOTAP GRID

AUTO / TAP BPM %ms CH SELECT START / STOP R L WAKE UP PARAMETER 1234 MICABMST TIME MAX LEVEL / DEPTH ON / OFF MIN

MIC MASTER MIDI

BEAT EFFECTS BEAT TAP LINK SOUND COLOR FX HEADPHONES FADER START STEREO MASTER 0 MIXING LEVEL BOOTH MONITOR EQ CURVE CH FADER CROSS FADER PHONES CUE MONO SPLIT USB MIC1 QUAN-TIZE MASTER CF.B CF.A MIC 4 3 2 1 0

ON/ OFF LFO FORM UTILITY X- PAD ROBOT REVERB PHASER SLIP ROLL ROLL FLANGER FILTER REV ROLL SND/ RTN MELODIC TRANS ECHO SPIRAL MIDI LFO DELAY

CDJ-2000nexus DJM-900nexus CDJ-2000nexus

Audio cable LAN cable (wired) Wireless

Connection procedure

Creating the

[PLAYER N

o.] setting

2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set the number to be specified

for [PLAYER No.] (a number from 1 to 4).

[PLAYER No.] setting screen (ex.: when set to [PLAYER 2])

! [PLAYER No.] is set to [AUTO] upon shipment from the factory.

(11)

Connecting

the

CDJ-2000nexus

and

DJM-900nexus

1 Connect the wireless router and DJM-900nexus by LAN cable.

2 Connect the LAN cable and audio cables.

Connect in such a way that the DJ player’s player number and the channel number of the terminals to which the DJ mixer’s audio cables are connected are the same number.

Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the wireless router is connected to the DJ mixer

DJM-900nexus OFF RETURN L L L 1 GND 2 HOT 3 COLD L R L L IN CH3 CH4 CH1 CH2 R R R R L R R PHONOCH 4CD/LINE CH 3 L R PHONOCH 1CD/LINE SIGNAL GND SIGNAL GND TRS CD/LINE LINE

MASTER1 MASTER2 REC OUT BOOTH

MIC2 MIDI OUT DIGITAL MASTER OUT LINK L R CH 2 CD/LINE LINE (MONO) L R (MONO) SEND POWER AC IN ON L L L R L R CH 3 GND SIGN TRS CD/LINE LINE

MASTER2 REC OUT BOOTH L R CH 2 CD/LINE LINE POWER CONTROL CDJ-2000nexus POWER CONTROL CDJ-2000nexus L R L R L R L R

LINK NG LINK OK

Checking that the LAN cable and audio cables are synchronized

DJM-900nexus HI EQ/ TRIM 9 6 -26/ MID 6 -26/ LOW ISO OVER 10 7 4 2 1 - 1 - 2 - 3 - 5 - 7 -10 -15 -24 0 TRIM HI EQ/ 9 6 -26/ MID 6 -26/ LOW ISO OVER 10 7 4 2 1 - 1 - 2 - 3 - 5 - 7 -10 -15 -24 0 CDJ-2000nexus

(12)

Checking the device(s) connected by wireless connection

1 Press the [rekordbox] button.

rekordbox BROWSE TAG LIST INFO MENU

BACK TAG TRACK / REMOVE

(13)

Connecting

the

CDJ-2000nexus

and

DJM-900nexus

2-2

SD memory card

Equipment used

! Switching hub

! DJM-900nexus

! Audio cable

! LAN cables (one for each DJ player + two more)

Connections diagram (when connecting two DJ players)

LEVEL USB DIGITALCD/ LINE PHONO 1/ 2 HI MIC 1 MIC 2 HI LOW EQ EQ/ 1212 1212 0 0 ONTALKOVER OFF SPACE NOISE CUE CUE CUE CRUSHFILTER DUB ECHOGATE/COMP

1234 B A THRU TRIM 9 6 -26/ MID 6 -26/ LOW 6 -26/ COLOR ISO OVER 10 10 9 8 7 6 5 4 3 2 1 7 4 2 1 - 1 - 2 - 3 - 5 - 7 -10 -15 -24 dB 0 HI LOW TRIM USB DIGITALCD/ LINE PHONO 7/ 8 HI EQ/ CUE B A THRU 9 6 -26/ MID 6 -26/ LOW 6 -26/ COLOR ISO OVER 10 7 4 2 1 - 1 - 2 - 3 - 5 - 7 -10 -15 -24 dB 0 HI LOW CUE TRIM USB DIGITALCD/ LINE LINE

CROSS FADER ASSIGN LEVEL POWER BALANCE 0 AUTO GRID TAP AUTO / TAP BPM %ms CH SELECT START / STOP R L WAKE UP PARAMETER 1234 MICABMST TIME MAX LEVEL / DEPTH ON / OFF MIN

MIC MASTER MIDI

ON/ OFF LFO FORM UTILITY X- PAD ROBOT REVERB PHASER SLIP ROLL ROLL FLANGER FILTER REV ROLL SND/ RTN MELODIC TRANS ECHO SPIRAL MIDI LFO DELAY

CDJ-2000nexus DJM-900nexus CDJ-2000nexus

Audio cable LAN cable (wired) USB connections

Connection procedure

Creating the

[PLAYER N

o.] setting

2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set the number to be specified

for [PLAYER No.] (a number from 1 to 4).

(14)

1 Connect the switching hub and DJM-900nexus by LAN cable.

2 Connect the LAN cable and audio cables.

Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the switching hub is connected to the DJ mixer

DJM-900nexus OFF RETURN L L L 1 GND 2 HOT 3 COLD L R L L IN CH3 CH4 CH1 CH2 R R R R L R R PHONOCH 4CD/LINE CH 3 L R PHONOCH 1CD/LINE SIGNAL GND SIGNAL GND TRS CD/LINE LINE

MASTER1 MASTER2 REC OUT BOOTH

MIC2 MIDI OUT DIGITAL MASTER OUT LINK L R CH 2 CD/LINE LINE (MONO) L R (MONO) SEND POWER AC IN ON L L L R L R CH 3 GND SIGN TRS CD/LINE LINE

MASTER2 REC OUT BOOTH L R CH 2 CD/LINE LINE POWER CONTROL CDJ-2000nexus POWER CONTROL CDJ-2000nexus L R L R L R L R

Check that the player number indicated on the DJ player’s screen is lit in white.

LINK NG LINK OK

Checking that the LAN cable and audio cables are synchronized

DJM-900nexus HI EQ/ TRIM 9 6 -26/ MID 6 -26/ LOW ISO OVER 10 7 4 2 1 - 1 - 2 - 3 - 5 - 7 -10 -15 -24 0 TRIM HI EQ/ 9 6 -26/ MID 6 -26/ LOW ISO OVER 10 7 4 2 1 - 1 - 2 - 3 - 5 - 7 -10 -15 -24 0 CDJ-2000nexus

(15)

Connecting

the

CDJ-2000nexus

and

DJM-900nexus

2 Press the [rekordbox] button.

rekordbox BROWSE TAG LIST INFO MENU

BACK TAG TRACK / REMOVE

(16)

3

Connecting the CDJ-2000nexus and

another mixer

3-1

Equipment used

! Wireless router with internal switching hub

! Another DJ mixer (DJ mixer other than the DJM-2000nexus/DJM-2000/DJM-900nexus)

! Audio cable

! LAN cables (one for each DJ player)

Audio cable LAN cable (wired) Wireless CDJ-2000nexus CDJ-2000nexus LEVEL MIC 1 MIC 2 EQ 0 0 POWER MIC USB MIC1 AUTO / TAP START / STOP CH SELECT PARAMETER 1234 MICAB MST TIME MAX LEVEL / DEPTH ON / OFF MIN MIDI BEAT EFFECTS BEAT TAP

ON/ OFF UTILITY

PHASER SPIRAL FLANGER SLIP ROLL ROLL FILTER TRANS REV ROLL SND/ RTN ROBOT REVERB ECHO PITCH ECHO DELAY HI LOW 12 12 12 12 ONTALK OVER OFF SOUND COLOR FX NOISECUTTER CRUSHFILTER 1234 FADER START HEAD PHONES STEREO MONO SPLIT MASTER 0 MIXING LEVEL CUE PHONES CD/LINE PHONOUSB

1/2 EQ/ TRIM 9 HI 6 -26/ MID 6 -26/ LOW 6 -26/ ISO OVER 10 7 4 2 1 - 1 - 2 - 3 - 5 - 7 -10 -15 -24 dB 0 BEAT COLOR HI LOW CUE B A THRU 10 9 8 7 6 5 4 3 2 1 0

CD/LINELINEUSB 3/4 EQ/ TRIM 9 HI 6 -26/ MID 6 -26/ LOW 6 -26/ ISO OVER 10 7 4 2 1 - 1 - 2 - 3 - 5 - 7 -10 -15 -24 dB 0 BEAT COLOR HI LOW CUE B A THRU 10 9 8 7 6 5 4 3 2 1 0

CD/LINELINEUSB 5/6 EQ/ TRIM 9 HI 6 -26/ MID 6 -26/ LOW 6 -26/ ISO OVER 10 7 4 2 1 - 1 - 2 - 3 - 5 - 7 -10 -15 -24 dB 0 OVER 10 7 4 2 1 - 1 - 2 - 3 - 5 - 7 -10 -15 -24 R LdB 0 BEAT COLOR HI LOW CUE B A THRU 10 9 8 7 6 5 4 3 2 1 0

CD/LINE PHONOUSB 7/8 EQ/ TRIM 9 HI 6 -26/ MID 6 -26/ LOW 6 -26/ ISO OVER 10 7 4 2 1 - 1 - 2 - 3 - 5 - 7 -10 -15 -24 dB 0 BEAT COLOR HI LOW CUE CUE CUE B A THRU STEREO EQ MONO B A ISOLATOR WAKE UP LEVEL 0 BALANCE R L MASTER BOOTH MONITOR EQ CURVE CH FADER CROSS FADER 0 AUTO TAP BPM% ms 1 234 MIC CF.A CF.B MASTER

CROSS FADER ASSIGN

DJ mixer other than the DJM-2000nexus/ DJM-2000/ DJM-900nexus

Connection procedure

Creating the

[PLAYER N

o.] setting

2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set [PLAYER No.] to [AUTO].

(17)

Connecting

the

CDJ-2000nexus

and

another

mixer

LINK NG LINK OK

Checking the device(s) connected by wireless connection

1 Press the [rekordbox] button.

rekordbox BROWSE TAG LIST INFO MENU

BACK TAG TRACK / REMOVE

(18)

3-2

Connecting rekordbox by wired connection/Connecting a USB device or

SD memory card

Equipment used

! Switching hub

! Audio cable

Connections diagram (when connecting two DJ players)

LEVEL MIC 1 MIC 2 EQ 0 0 POWER MIC USB MIC1 AUTO / TAP START / STOP CH SELECT PARAMETER 1234 MICAB MST TIME MAX LEVEL / DEPTH ON / OFF MIN MIDI BEAT EFFECTS BEAT TAP

ON/ OFF UTILITY

PHASER SPIRAL FLANGER SLIP ROLL ROLL FILTER TRANS REV ROLL SND/ RTN ROBOT REVERB ECHO PITCH ECHO DELAY HI LOW 12 12 12 12 ONTALKOVER OFF SOUND COLOR FX NOISECUTTER CRUSHFILTER 1234 FADER START HEAD PHONES STEREO MONO SPLIT MASTER 0 MIXING LEVEL CUE PHONES CD/LINE PHONOUSB

1/2 EQ/ TRIM 9 HI 6 -26/ MID 6 -26/ LOW 6 -26/ ISO OVER 10 7 4 2 1 - 1 - 2 - 3 - 5 - 7 -10 -15 -24 dB 0 BEAT COLOR HI LOW CUE B A THRU 10 9 8 7 6 5 4 3 2 1 0

CD/LINELINEUSB 3/4 EQ/ TRIM 9 HI 6 -26/ MID 6 -26/ LOW 6 -26/ ISO OVER 10 7 4 2 1 - 1 - 2 - 3 - 5 - 7 -10 -15 -24 dB 0 BEAT COLOR HI LOW CUE B A THRU 10 9 8 7 6 5 4 3 2 1 0

CD/LINELINEUSB 5/6 EQ/ TRIM 9 HI 6 -26/ MID 6 -26/ LOW 6 -26/ ISO OVER 10 7 4 2 1 - 1 - 2 - 3 - 5 - 7 -10 -15 -24 dB 0 OVER 10 7 4 2 1 - 1 - 2 - 3 - 5 - 7 -10 -15 -24 R LdB 0 BEAT COLOR HI LOW CUE B A THRU 10 9 8 7 6 5 4 3 2 1 0

CD/LINE PHONOUSB 7/8 EQ/ TRIM 9 HI 6 -26/ MID 6 -26/ LOW 6 -26/ ISO OVER 10 7 4 2 1 - 1 - 2 - 3 - 5 - 7 -10 -15 -24 dB 0 BEAT COLOR HI LOW CUE CUE CUE B A THRU STEREO EQ MONO B A ISOLATOR WAKE UP LEVEL 0 BALANCE R L MASTER BOOTH MONITOR EQ CURVE CH FADER CROSS FADER 0 AUTOTAP BPM %ms 1 2 34 MICCF.A CF.B MASTER

CROSS FADER ASSIGN

Audio cable LAN cable (wired) USB connections DJ mixer other than the

DJM-2000nexus/ DJM-2000/ DJM-900nexus

Creating the

[PLAYER N

o.] setting

DJ players and the DJ mixer before connecting the LAN cables.

2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set [PLAYER No.] to [AUTO].

(19)

Connecting

the

CDJ-2000nexus

and

another

mixer

LINK NG LINK OK

Checking the connected device(s)

2 Press the [rekordbox] button.

rekordbox BROWSE TAG LIST INFO MENU

BACK TAG TRACK / REMOVE

(20)

4

Connecting the CDJ-2000/CDJ-900 and

SD memory card

Equipment used

! CDJ-2000 (1 – 4 units) or CDJ-900 (1 – 4 units)

! Computer (Mac/Windows) on which rekordbox is installed

! Audio cable

Connections diagram (when connecting two DJ players)

Audio cable LAN cable (wired)

PLAY / PAUSE CUE SEARCH TRACK SEARCH FWD REV DIRECTION USB STOP LINK USB SD DISC

BROWSE TAG LIST INFO MENU UTILITY REV FWD TEMPO RESET MASTERTEMPO TEMPO 610 16WIDE VINYLJOG MODE CDJ RELEASE / START TOUCH / BRAKE VINYL SPEED ADJUST LIGHT HEAVY JOG ADJUST CUE / LOOP DELETE MEMORY

UNLOCK OFF ON LOCK POWER DISC EJECT STANDBY BACKTAG TRACK/ REMOVE

TIME MODE AUTO CUE

OUT RELOOP/EXIT LOOP NEEDLE SEARCH

CALL IN ADJUSTOUT ADJUST

LOOP CUTTER 4-BEAT LOOP IN / CUE REC / CALL SD HOT CUE TEMPO 0 MULTI PLAYERCDJ-2000 CDJ-2000 PLAY / PAUSE CUE SEARCH TRACK SEARCH FWD REV DIRECTION USB STOP LINK USB SD DISC

BROWSE TAG LIST INFO MENU UTILITY REV FWD TEMPORESET MASTER TEMPO TEMPO 610 16WIDE VINYLJOG MODE CDJ RELEASE / START TOUCH / BRAKE VINYL SPEED ADJUST LIGHT HEAVY JOG ADJUST CUE / LOOP DELETE MEMORY

UNLOCK OFF ON LOCK POWER DISC EJECT STANDBY BACK/ REMOVETAG TRACK

TIME MODE AUTO CUE

LOOP CUTTER 4-BEAT LOOP IN / CUE REC / CALL SD HOT CUE TEMPO 0 MULTI PLAYERCDJ-2000 CDJ-2000 OVER POWER CD

/DIGITAL PHONO USB 1/2 TRIM CH SELECT EFFECT SELECT EFFECT FREQUENCY 1234 OFF ON MASTER LINK HEADPHONES MIC INST FX MIDI CURVE SETTING 10 7 4 2 1 0 - 1 - 2 - 3 - 5 - 7 - 10 - 15 - 24 dB 10 9 7 8 6 5 43 21 0 BALANCE LOW TIME LIVE SAMPLER WAKE UP LEVEL/DEPTH 1/81/41/23/41/12/14/1 MINMAX MINMAX AUTO /TAP TAP ON/OFF ON/OFF CUE CUE CUE A B DELAY ECHO FILTER GATE ROLL TRANS REVERB MULTI TAPDELAY

PHASER SLIP ROLL RETURNSEND/

REV ROLL CUE CUE NOISE JET ZIP HPF CRUSH LPF MONO ON/OFF CH EQ EQ CROSS FADER CH FADER ISOLATOR START/STOP SNAPSHOT UTILITY BOOTH MONITOR STEREO MONO SPLIT STEREO

L R DJM-2000 - 0 LR FILTER PARAMETER MIN MAX OVER 10 7 4 2 1 0 - 1 - 2 - 3 - 5 - 7 - 10 - 15 - 24 dB ISO EQ/ EQ LOW MID HI +9 +6 - 0 0 LOW MINMAX CUEMASTER PHONES LEVEL MIXING HI -26/ +6 -26/ +6 -26/ -12+12 OFF ON OVERTALK

PROFESSIONAL MIXER 10 9 7 8 6 5 4 3 21 0 ATHRUB ATHRUB CROSS FADER ASSIGN

ATHRUB ATHRUB CROSS FADER ASSIGN MIC LEVEL 0 -CUE FILTER MIN MAX CUE FILTER MIN MAX CUE FILTER MIN MAX -12+12 CD /DIGITALLINEUSB 3/4

OVER 10 7 4 2 1 0 - 1 - 2 - 3 - 5 - 7 - 10 - 15 - 24 dB 10 7 4 2 1 0 - 1 - 2 - 3 - 5 - 7 - 10 - 15 - 24 dB ISO

EQ/ EQ/ISO

TRIM +9 HI +6 -26/ MID +6 -26/ LOW +6 -26/ CD /DIGITALLINEUSB 5/6

TRIM +9 HI +6 -26/ MID +6 -26/ LOW +6 -26/ OVER 10 7 4 2 1 0 - 1 - 2 - 3 - 5 - 7 - 10 - 15 - 24 dB ISO EQ/ CD /DIGITAL PHONO USB 7/8

TRIM +9 HI +6 -26/ MID +6 -26/ LOW +6 -26/ OVER MICABM MID MIN MAX HI MIN MAX MIDI MIX REMIX DJM-2000

Connection procedure

Creating the

[PLAYER N

o.] setting

1 Check that no USB devices or SD memory cards are connected to the DJ player(s), then turn on the power of the DJ player(s)

and the DJ mixer(s) before connecting the LAN cables.

! The [PLAYER No.] setting cannot be changed if a USB device or SD memory card is connected or if a link is established.

2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set [PLAYER No.] to [AUTO].

(21)

Connecting

the

CDJ-2000/CDJ-900

and

Connect in such a way that the channel number of the DJ mixer’s LAN cable insertion port and the channel number of the terminals to which the audio cables are connected are the same number.

Connect the computer to [COMPUTER1] or [COMPUTER2].

Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the computer (Mac/Windows) is connected to [COMPUTER1]

CH 2 CH 3 CH 4 CH 1SIGNAL GND CD CD L R L R PHONO

BOOTH SEND RETURN COMPUTER 1 LINK CH 3 CH 1 CH 4 CH 2 CH 2 CH 3 CH 4 CH 1 DIGITAL SIGNAL GND CD 1GND -6dB -3dB 0dB 2HOT 3COLD CD L R PHONO POWER AC IN OFF ON MASTER1 MASTER ATT.

MASTER2REC OUT

DIGITAL CD DIGITAL L R CD LINE CONTROL CD DIGITAL DJM-2000 R R CONTROL O) COMPUTER 1 LINK CH 3 CH 1 CH 4 CH 2 CD DIGITAL AUDIO OUT R L CONTROL LINK USB DIGITAL OUT POWER AUDIO OUT R L CONTROL LINK USB DIGITAL OUT POWER CDJ-2000 CDJ-2000

Checking the connections

Checking the DJ player’s link established by LAN connection (for the CDJ-2000)

LINK NG LINK OK

Checking the DJ player’s link established by LAN connection (for the CDJ-900)

Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then check that [CONNECTED] is

displayed for [LINK STATUS].

UTILITY

2

NOT CONNECTED

ON

–

PLAYER No.

LINK STATUS

AUTO STANDBY

MIDI CHANNEL

LINK NG

UTILITY

2

CONNECTED

ON

–

PLAYER No.

LINK STATUS

AUTO STANDBY

MIDI CHANNEL

LINK OK

! If [NOT CONNECTED] is displayed, the link is not established. If there is a DJ player for which [NOT CONNECTED] is displayed, redo the connection procedure.

Checking that the LAN cable and audio cables are synchronized

CD /DIGITAL PHONO USB 1/2

TRIM OVER 10 7 4 2 HI +9 CD /DIGITALLINE USB 3/4

OVER 10 7 4 2 TRIM +9 HI

(22)

— To use a computer (Mac/Windows) connected by wired LAN: Press the [LINK] button.

— To use a USB device connected by wire to the USB "A terminal": Press the [USB] button.

! The following describes an example for when using a computer (Mac/Windows) connected by wired LAN (for when the [LINK] button is pressed).

2 Press the [LINK] button.

LINK

USB

SD

DISC

BROWSE TAG LIST INFO MENU

UTILITY BACK TAG TRACK/ REMOVE

TIME MODE AUTOCUE

3 Click the [LINK] button to connect.

rekordbox (Mac/Windows)

Ex.: When connecting a computer (Mac/Windows)

55.481 mm

(23)

5

Connecting the CDJ-2000/CDJ-900 and

DJM-900nexus

SD memory card

Equipment used

! Switching hub

! DJM-900nexus

! Audio cable

! LAN cables (one for each DJ player + two more)

Connections diagram (when connecting two DJ players)

BROWSE TAG LIST INFO MENU UTILITY REV FWD TEMPO RESET MASTERTEMPO TEMPO 610 16WIDE VINYLJOG MODE CDJ RELEASE / START TOUCH / BRAKE VINYL SPEED ADJUST LIGHT HEAVY JOG ADJUST CUE / LOOP DELETE MEMORY

OUT RELOOP/EXIT LOOP NEEDLE SEARCH

LOOP CUTTER 4-BEAT LOOP IN / CUE REC / CALL SD HOT CUE TEMPO 0 MULTI PLAYERCDJ-2000 CDJ-2000 PLAY / PAUSE CUE SEARCH TRACK SEARCH FWD REV DIRECTION USB STOP LINK USB SD DISC

BROWSE TAG LIST INFO MENU UTILITY REV FWD TEMPO RESET MASTER TEMPO TEMPO 610 16WIDE VINYLJOG MODE CDJ RELEASE / START TOUCH / BRAKE VINYL SPEED ADJUST LIGHT HEAVY JOG ADJUST CUE / LOOP DELETE MEMORY

LOOP CUTTER 4-BEAT LOOP IN / CUE REC / CALL SD HOT CUE TEMPO 0 MULTI PLAYERCDJ-2000 CDJ-2000 LEVEL USB DIGITALCD/ LINE PHONO 1/ 2 HI MIC 1 MIC 2 HI LOW EQ EQ/ 12 12 12 12 0 0 ONTALKOVER OFF SPACE NOISE CUE CUE CUE CRUSHFILTER DUB ECHOGATE/COMP

1234 B A THRU TRIM 9 6 -26/ MID 6 -26/ LOW 6 -26/ COLOR ISO OVER 10 10 9 8 7 6 5 4 3 2 1 7 4 2 1 - 1 - 2 - 3 - 5 - 7 -10 -15 -24 dB 0 HI LOW TRIM USB DIGITALCD/ LINE PHONO 7/ 8 HI EQ/ CUE B A THRU 9 6 -26/ MID 6 -26/ LOW 6 -26/ COLOR ISO OVER 10 7 4 2 1 - 1 - 2 - 3 - 5 - 7 -10 -15 -24 dB 0 HI LOW CUE TRIM USB DIGITALCD/ LINE LINE

CROSS FADER ASSIGN LEVEL

POWER

BALANCE 0

AUTOTAP GRID

AUTO / TAP BPM %ms CH SELECT START / STOP R L WAKE UP PARAMETER 1234 MICABMST TIME MAX LEVEL / DEPTH ON / OFF MIN

MIC MASTER MIDI

ON/ OFF LFO FORM UTILITY X- PAD ROBOT REVERB PHASER SLIP ROLL ROLL FLANGER FILTER REV ROLL SND/ RTN MELODIC TRANS ECHO SPIRAL MIDI LFO DELAY DJM-900nexus Audio cable LAN cable (wired)

Creating the

[PLAYER N

o.] setting

1 Check that no USB devices or SD memory cards are connected to the DJ player(s), then turn on the power of the DJ player(s)

and the DJ mixer(s) before connecting the LAN cables.

! The [PLAYER No.] setting cannot be changed if a USB device or SD memory card is connected or if a link is established.

2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set the number to be specified

for [PLAYER No.] (a number from 1 to 4).

Connecting

the

CDJ-2000/CDJ-900

and

(24)

1 Connect the switching hub and DJM-900nexus by LAN cable.

2 Connect the LAN cable and audio cables.

Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the computer (Mac/Windows) is connected to the DJ mixer

DJM-900nexus OFF RETURNL L L 1 GND 2 HOT 3 COLD L R L L IN CH3 CH4 CH1 CH2 R R R R L R R PHONO CH 4 CH 3 CD/LINE L R PHONO CH 1 CD/LINE SIGNAL GND SIGNAL GND TRS CD/LINE LINE

MASTER1 MASTER2 REC OUT BOOTH

MIC2 MIDI OUT DIGITAL MASTER OUT LINK L R CH 2 CD/LINE LINE (MONO) L RSEND(MONO) POWER AC IN ON L L L R L R CH 3 GND SIGN TRS CD/LINE LINE

MASTER2 REC OUT BOOTH L R CH 2 CD/LINE LINE AUDIO OUT R L CONTROL LINK USB DIGITAL OUT POWER AUDIO OUT R LCONTROL LINK USB DIGITAL OUT POWER CDJ-2000 CDJ-2000 L R L R L R L R

Checking the connections

Checking the DJ player’s link established by LAN connection (for the CDJ-2000)

LINK NG LINK OK

Checking the DJ player’s link established by LAN connection (for the CDJ-900)

Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then check that [CONNECTED] is

displayed for [LINK STATUS].

UTILITY

2

NOT CONNECTED

ON

–

PLAYER No.

LINK STATUS

AUTO STANDBY

MIDI CHANNEL

LINK NG

UTILITY

2

CONNECTED

ON

–

PLAYER No.

LINK STATUS

AUTO STANDBY

MIDI CHANNEL

LINK OK

! If [NOT CONNECTED] is displayed, the link is not established. If there is a DJ player for which [NOT CONNECTED] is displayed, redo the connection procedure.

Checking that the LAN cable and audio cables are synchronized

CD /DIGITAL PHONO USB 1/2

TRIM OVER 10 7 4 2 1 0 - 1 - 2 - 3 - 5 - 7 - 10 - 15 - 24 dB ISO EQ/ LOW MID HI +9 +6 -26/ +6 -26/ +6 -26/ CD /DIGITALLINE USB 3/4

OVER 10 7 4 2 1 0 - 1 - 2 - 3 - 5 - 7 - 10 - 15 - 24 dB ISO EQ/ TRIM +9 HI +6 -26/ MID +6 -26/ LOW +6 -26/ CDJ-2000

(25)

Connecting

the

CDJ-2000/CDJ-900

and

DJM-900nexus

— To use a computer (Mac/Windows) connected by wired LAN: Press the [LINK] button.

— To use a USB device connected by wire to the USB "A terminal": Press the [USB] button.

! The following describes an example for when using a computer (Mac/Windows) connected by wired LAN (for when the [LINK] button is pressed).

2 Press the [LINK] button.

LINK

USB

SD

DISC

BROWSE TAG LIST INFO MENU

UTILITY BACK TAG TRACK/ REMOVE

TIME MODE AUTOCUE

3 Click the [LINK] button to connect.

Ex.: When connecting a computer (Mac/Windows)

55.481 mm

(26)

6

Connecting the CDJ-2000/CDJ-900 and

another mixer

SD memory card

Equipment used

! Switching hub

! Audio cable

Connections diagram (when connecting two DJ players)

Audio cable LAN cable (wired)

BROWSE TAG LIST INFO MENU UTILITY REV FWD TEMPO RESET MASTERTEMPO TEMPO 610 16WIDE VINYLJOG MODE CDJ RELEASE / START TOUCH / BRAKE VINYL SPEED ADJUST LIGHT HEAVY JOG ADJUST C