RJS Monitor. User Guide RJS Software Systems Document Version

User Guide

RJS Email Monitor

© 2012 RJS Software Systems

Document Version 1.0.0.1

RJS Software Systems

2970 Judicial Road, Suite 100

Burnsville, MN 55337

Phone: 952-736-5800

Fax: 952-736-5801

© 2012 RJS Software Systems

This guide is protected under copyright law, furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by RJS Software Systems. RJS Software Systems assumes no responsibility or liability for any errors or inaccuracies that may appear in the informational content contained in this guide.

This guide is licensed for use under the terms of the Creative Commons Attribution Non-Commercial 3.0 License. This license allows users to copy, distribute, and transmit the guide for noncommercial purposes only so long as (1) proper attribution to RJS Software is given as the owner of the guide; and (2) any reuse or distribution of the guide contains a notice that use of the guide is governed by these terms. The best way to provide notice is to include the following link. To view a copy of this license, visit

http://creativecommons.org/licenses/by-nc/3.0/us/.

Products that are referred to in this document may be either trademarks and/or registered trademarks of the respective owners. The publisher and the author make no claim to these trademarks.

Table of Contents

Preface ... 1

What Is in This Guide ... 1

About RJS Software Systems ... 1

What Is Not in This Guide... 1

Document Conventions and Symbols ... 2

Contacting RJS Software Systems ... 2

Introducing RJS Email Monitor... 5

About RJS Email Monitor ... 5

Installing and Licensing RJS Email Monitor ... 5

Opening the RJS Email Monitor Administration Application ... 5

Touring RJS Email Monitor ... 6

Configuring RJS Email Monitor ... 9

Configuring the RJS Email Monitor Settings ... 9

Setting Up an Inbox ... 13

Setting Up a Filter ... 14

Setting Up a Destination ... 17

Starting and Stopping RJS Email Monitor ... 21

Appendices ... 25

Appendix A: Using the Log ... 25

Appendix B: Changing the Idle Time ... 25

Preface

Welcome to the RJS Email Monitor User Guide. This guide is document version 1.0.0.1. For more information on document version, see Document Conventions and Symbols below.

What Is in This Guide

About RJS Software Systems What Is Not in This Guide

Document Conventions and Symbols Contacting RJS Software Systems

What Is in This Guide

This user guide provides detailed information on how to install, configure, and start RJS Email Monitor. Here is what this guide includes:

 Section 1 Preface describes this user guide, how to find the information you need, and how to contact RJS Software Systems.

 Section 2 Introducing RJS Email Monitor describes RJS Email Monitor, shows you where to find installation and licensing instructions, shows you how to open it, and introduces its interface.

 Section 3 Configuring RJS Email Monitor shows you how to change RJS Email Monitor's settings and how to set up inboxes, filters, and destinations.

 Section 4 Starting and Stopping RJS Email Monitor shows you how to set up, start, and stop the RJS Email Monitor service so that it can monitor inboxes and distribute file attachments based on your configuration.

 Appendices The Appendices show you how to view RJS Email Monitor's log and change the service's idle time.

About RJS Software Systems

RJS Software Systems helps companies go paperless by automating business processes and digitally managing the entire lifecycle of their business information. We provide solutions that help you capture, manage, distribute, and route documents digitally, and we provide you with the tools you need to keep that information safe and secure. Learn more about RJS Software Systems at

http://www.rjssoftware.com.

What Is Not in This Guide

RJS Email Monitor User Guide

2

 WebDocs - iSeries Edition or WebDocs - Windows Edition. For information on WebDocs - iSeries Edition, see

http://support.rjssoftware.com/product/webdocs-iseries. For information on WebDocs - Windows Edition, see

http://support.rjssoftware.com/product/webdocs-windows.

Document Conventions and Symbols

This user guide conforms to the following conventions:

 In step-by-step procedures, the following are in bold type: buttons, icons, tabs, or words that you click, and keys that you press.

For example: On the Document tab, click Delete Page.

 In step-by-step procedures, a selection in a drop-down list that you should choose is in bold type, but when you have more than one equally valid choice in a drop-down list, those selections are in italic type.

 In step-by-step procedures, words, letters, numerals, or symbols that you type into a text box or field are in both bold and italic type.

For example: Type GO RJSIMAGE on a command line.

 The document version, shown on the first page of this guide, denotes both the RJS Email Monitor software version this guide represents and document draft for the release. Document version is in the format X.Y.ZZ.N, where X.Y.ZZ represents the RJS Email Monitor software version and N represents the document draft number.

For example: If the document version is noted as 1.0.0.1, then the information in this guide is current as of RJS Email Monitor version 1.0.0, and this guide is the first release of the guide for that version.

 Typically with RJS Email Monitor, as with most software applications, there are several ways to accomplish the same thing. This guide shows one simple way to perform an action, usually by clicking.

 RJS Software Systems is referred to as RJS Software in every section of this guide except the introduction and index.

 The folder paths in this guide assume that the name of the Program Files folder is Program Files

(x86). Depending on whether you are running a 32-bit or 64-bit operating system, your Program

Files folder may not include (x86).

Contacting RJS Software Systems

Please do the following before contacting RJS Software Systems for technical support:

 Gather and organize as much information as possible about the problem.

 If you have not already done so, check this guide's table of contents and index for information that addresses your concern.

Preface

Telephone

(available on business days from 8:00 a.m. to 5:00 p.m. Central Time)

Email

Website

Introducing RJS Email Monitor

This section provides a summary of RJS Email Monitor, where to find installation and licensing instructions, how to open it, and an overview of its interface.

About RJS Email Monitor

Installing and Licensing RJS Email Monitor Opening RJS Email Monitor

Touring RJS Email Monitor

About RJS Email Monitor

RJS Email Monitor is automated document-distribution software that monitors email inboxes for file attachments and then distributes the attachments to a directory or to WebDocs document-management software. After you configure RJS Email Monitor, RJS Email Monitor runs in the background as a Windows service to find and distribute the documents you need.

With RJS Email Monitor, you can:

 Monitor any number of email inboxes.

 Find email attachments of any file format.

 Convert email attachments from PDF to TIFF, or vice-versa.

 Distribute email attachments to a local or network directory.

 Distribute email attachments directly to WebDocs.

Installing and Licensing RJS Email Monitor

For installation instructions, see: http://support.rjssoftware.com/product/email-monitor#install-upgrade. For licensing instructions, see: http://support.rjssoftware.com/product/email-monitor#license-information.

Opening the RJS Email Monitor Administration Application

RJS Email Monitor itself runs as a Windows service in the background. To make changes to how RJS Email Monitor runs, you need to open the RJS Email Monitor Administration Application.

If you installed RJS Email Monitor in the default location on the PC server, open the RJS Email Monitor Administration application by clicking: Start > All Programs > RJS Software > RJS Email Monitor > RJS Email Monitor Admin.

RJS Email Monitor User Guide

6

Touring RJS Email Monitor

You set up and change how RJS Email Monitor runs by configuring the settings in the RJS Email Monitor Administration application. The RJS Email Monitor Administration application has settings on two tabs:

The Settings Tab

This diagram shows you the Settings tab:

Use the Settings tab to:

 Configure the database settings.

 Configure the log settings.

 Set up the mail server credentials.

 Set up which file formats to convert and distribute.

Introducing RJS Email Monitor

The Inbox Set-Up Tab

This diagram shows you the Inbox Set-Up tab. You use the Inbox Set-Up tab by working in three areas:

1. The Inbox Set-Up Area

Use the Inbox Set-Up Area to:

 Add email inboxes to be monitored.

 Choose after-processing options.

2. The Filter Set-Up Area

Click each inbox to display that inbox's filters in the Filter Set-Up Area. Use the Filter Set-Up Area to:

 Choose the scope of each filter.

RJS Email Monitor User Guide

8

3. The Destination Set-Up Area

Click each filter to choose where to distribute the attachment files that meet that filter's selection criteria. Use the Destination Set-Up Area to either:

 If you're distributing attachment files to a directory, choose the directory.

Configuring RJS Email Monitor

RJS Email Monitor's configuration settings determine how RJS Email Monitor finds, converts, and

distributes file attachments. This section shows you where find RJS Email Monitor's configuration settings and how to set them.

This section is divided into the following topics, which you should follow in order: 1. Configuring the RJS Email Monitor Settings

2. Setting Up an Inbox

3. Setting Up a Filter

4. Setting Up a Destination

Configuring the RJS Email Monitor Settings

The RJS Email Monitor settings determine how RJS Email Monitor connects to the database that stores filter settings, mail server, destination, and more.

To configure the RJS Email Monitor Settings:

1. Open RJS Email Monitor Administration and click the Settings tab. The settings display.

2. Configure the Database Settings:

a. Edit the database settings based on the following descriptions:

For...

For the Microsoft SQL Server database, type...

Server The connection to the database server.

Depending on how you configured Microsoft SQL Server, use either the format server\instance or server, where server is the Microsoft SQL Server name and instance is the Microsoft SQL Server instance name.

Neither the server name nor the instance name are case-sensitive.

Username A user name that has access to the RJS Email Monitor database. Best Practice: Use sa.

RJS Email Monitor User Guide

10

For...

For the Microsoft SQL Server database, type...

Password The password for Username.

Note: RJS Email Monitor encrypts the password.

b. Click Test to test the database connection.

3. Edit the Logging Settings based on the descriptions in the following table:

For...

For the logs, choose...

Log Debug

Whether to log additional debugging information:

 Check to log debugging information.

 Uncheck to log only errors and records of the documents that are distributed.

Best Practice: Only check this box if you are having issues with RJS Email Monitor and need to log additional information.

Log File Directory

The directory to save the log to:

 If the directory is on the RJS Email Monitor server, click Browse and choose the directory.

 If the directory is a network directory, type the UNC path.

By default, the logs save to C:\Program Files (x86)\RJS Software\RJS Email Monitor\Logs.

Configuring RJS Email Monitor

For...

For the logs, choose...

Error Directory

The directory to save attachments that generate errors to:

 If the directory is on the RJS Email Monitor server, click Browse and choose the directory.

 If the directory is a network directory, type the UNC path.

By default, email attachments that generate errors save to C:\Program Files (x86)\RJS Software\RJS Email Monitor\Logs.

To resolve errors in distributing file attachments, check the log file to identify the error. Then go to Monitor > Run Error Directory to try to distribute all attachments in the error directory again. Attachments that are successfully distributed are deleted from the error directory; attachments that still generate an error remain in the error directory.

4. Edit the Mail Server Settings based on the descriptions in the following table:

For...

For the mail server that RJS Email Monitor is monitoring, type...

Mail Server IP The IP address.

Port The port.

Note: Most mail servers use port 110.

RJS Email Monitor User Guide

12

For...

For the files RJS Email Monitor converts and distributes, choose...

Temp Directory

Where on the RJS Email Monitor server to store temporary files by clicking Browse . By default, temporary files save to C:\Program Files (x86)\RJS Software\RJS Email Monitor\Temp.

Note: RJS Email Monitor deletes temporary files after the email is processed.

Output As

Which files to distribute and how to convert them:

Choose this

option...

To distribute

these file

formats...

And convert

to this file

format...

The same format as the original documents

TIFF PDF and TIFF TIFF

TIFF - Split by Page

PDF and TIFF

TIFF, where each page of a multi-page PDF or TIFF is a separate TIFF file PDF PDF and TIFF PDF

6. Configure the WebDocs Settings:

a. Choose whether you are distributing to:

 WebDocs - Windows Edition

 WebDocs - iSeries Edition

 Neither: distributing to a directory

b. If you are distributing to WebDocs, edit the WebDocs settings based on the descriptions in the following table:

Configuring RJS Email Monitor

For...

For the WebDocs system you are distributing to, type...

Webservice

URL The web-service URL.

User Name A user name that has access to all the folders and Document Types you are distributing to.

Password The password for the user name.

c. Click Test to test the WebDocs connection.

7. Click Apply to save changes. 8. Continue to Setting Up an Inbox.

Setting Up an Inbox

This topic shows you how to set up RJS Email Monitor to monitor an email inbox for file attachments to convert and distribute. If you have not yet configured RJS Email Monitor, see Configuring the RJS Email Monitor Settings before you set up an inbox.

To set up an inbox:

1. In the RJS Email Monitor Administration application, click the Inbox Set-Up tab. The Inbox Set-Up tab displays.

2. In the first row of the Inbox Set-Up Area, type the information for the inbox that RJS Email Monitor will monitor, based on the following descriptions:

For...

For the inbox that RJS Email Monitor will monitor, choose...

Name A name or description.

Address The email address.

Password The password to log in to the address.

RJS Email Monitor User Guide

14

For...

For the inbox that RJS Email Monitor will monitor, choose...

After Processing

What to do with an email after its file attachments have been successfully converted and distributed:

 None - convert and distribute the attachments again the next time

RJS Email Monitor monitors this inbox. Note: Only use this option for testing.

 Save - save an EML file of the email and its attachments to the

directory you choose in Save to Folder and then delete the email.

 Delete

Save to Folder

If you chose Save in After Processing, the path to a directory on the RJS Email Monitor server to save the EML file of the email and its file

attachments to.

3. Return to step 2 to set up as many inboxes as you need monitored.

4. Continue to Setting Up a Filter to choose which attachments from this inbox to convert and distribute.

Setting Up a Filter

This topic shows you how to set up a filter in RJS Email Monitor. A filter specifies the exact file

attachments within emails that RJS Email Monitor converts and distributes. If you have not yet set up an inbox, see Setting Up an Inbox before you set up a filter.

You can filter email file attachments by four selection criteria:

 The file name of the attachment.

 The contents of the body of the email.

 The From address of the email.

 The subject of the email. To set up a filter:

1. On the Inbox Set-Up tab, click the inbox to set up a filter for. The filters for this inbox display in the Filter Set-Up Area.

Configuring RJS Email Monitor

2. In the first row of the Filter Set-Up Area, set up the filter information based on the following descriptions:

For...

For this filter, choose...

Scope  This Inbox - apply to the inbox you clicked in step 1.

 All Inboxes - apply to all the inboxes in the Inbox Set-Up Area. This filter will display in the list of filters for each inbox.

Priority The priority, where 1 is highest priority and 100 is lowest priority. RJS Email Monitor assigns each file attachment to the highest-priority filter that

matches.

For example: If a file attachment meets the selection criteria for two filters, one with priority 1 and another with priority 2, RJS Email Monitor assigns the file attachment to the filter with priority 1. The file attachment is then

distributed only according to the priority-1 filter. It is never distributed with the priority-2 filter.

Attach Criteria and

Attachment Text

To filter attachments by file name:

1. In Attach Criteria, choose whether the file name:

 Begins With the text you choose.  Contains the text you choose.  Ends With the text you choose.

2. In Attachment Text, type the text that is in the file name of attachments you want to distribute.

For example: This filter distributes all attachments whose file name begins with "Invoice":

RJS Email Monitor User Guide

16

For...

For this filter, choose...

Body Criteria and Body Text

To filter attachments by email body:

1. In Body Criteria, choose whether the email body:

 Begins With the text you choose.  Contains the text you choose.  Ends With the text you choose.

2. In Body Text, type the text that is in the body of emails whose attachments you want to distribute.

For example: This filter distributes all file attachments that are in an email whose body contains the word "Invoice":

From Criteria and From Text

To filter attachments by the email's From address:

1. In From Criteria, choose whether the From address:

 Begins With the text you choose.  Contains the text you choose.  Ends With the text you choose.

2. In From Text, type the text that is in the From address of emails whose attachments you want to distribute.

For example: This filter distributes all file attachments that are in an email from an RJS Software email address:

Configuring RJS Email Monitor

For...

For this filter, choose...

Subject Criteria and Subject Text

To filter attachments by the email subject:

1. In Subject Criteria, choose whether the subject:

 Begins With the text you choose.  Contains the text you choose.  Ends With the text you choose.

2. In Subject Text, type the text that is in the subject of emails whose attachments you want to distribute.

For example: This filter distributes all file attachments that are in an email whose subject contains the word "Invoice":

3. Return to step 2 to set up as many filters for the inbox as you need.

4. (Optional) Best Practice: Set up a catch-all filter to convert and distribute any file attachments that the other filters do not. A catch-all filter is useful for saving copies of file attachments, if:

 The emails have typographic errors in the filter search criteria.

 You might have unexpected attachment files that you want to sort later manually. Use the following settings for the catch-all filter:

 Set Scope to All Inboxes.

 Set Priority to 100 so that this will be the last filter applied to inboxes.

 Leave all the criteria and text fields blank.

5. Continue to Setting Up a Destination to choose where to distribute the attachments from this filter.

RJS Email Monitor User Guide

18

To set up a destination:

1. On the Inbox Set-Up tab, click the filter to set up a destination for. The destination for this filter displays in the Destination Set-Up Area.

2. In Output To, choose whether to distribute attachments from this filter to a directory or WebDocs.

 If you choose to distribute to a directory, enter the directory information:

For...

To distribute to...

Directory

 A directory on the RJS Email Monitor server, click Browse and choose the directory.

 A network directory, type the UNC path.

Configuring RJS Email Monitor

For...

Choose for WebDocs...

Doc Type

The Document Type:

 For WebDocs - Windows Edition, type the Key for the Document Type, not the name:

 For WebDocs - iSeries Edition, type the Document Type name, not the description:

Folder The folder to distribute to:

 For WebDocs - Windows Edition, type the folder ID, not the folder name:

 For WebDocs - iSeries Edition, type the folder name, not the description:

Separate levels of folder names with a slash. For example: o To distribute documents to the level-one folder above,

type AP.

RJS Email Monitor User Guide

20

For...

Choose for WebDocs...

Title The title. Either type a title or choose a variable from the drop-down list:

This

variable...

Inserts this attribute into the

document title...

@From The email's From address. @Subject The email subject.

@Attachment

Name The file-attachment name.

@BodyText The first 250 characters of the email body.

For example: If you choose @SUBJECT, RJS Email Monitor uses the email subjects as the WebDocs titles for converted file attachments.

Key 1-30

The values of the search keys you are using.

Note: WebDocs - iSeries Edition allows search keys 1-10; WebDocs - Windows Edition allows search keys 1-30.

Either type each search key or choose a variable from the drop-down list:

This

variable...

Inserts this attribute into a

search key...

@From The email's From address. @Subject The email subject.

@AttachmentN

ame The file-attachment name.

@BodyText The first 250 characters of the email body.

For example: If you choose @FROM in Key 1, RJS Email Monitor uses the email's From address as the first WebDocs search key.

3. Continue to Starting and Stopping RJS Email Monitor to begin distributing attachments based on your configuration.

Starting and Stopping RJS Email Monitor

This section shows you how to start the RJS Email Monitor service so that it can find and distribute attachments based on your configuration.

When you start RJS Email Monitor, you are starting a Windows service. Before you can start the service, you need to configure it. Then, when you start the service, it finds attachments in the inboxes you specified, converts them, and distributes them based on your set-up. Then the service idles for 1 minute before beginning its cycle again. The service continues to find, convert, and distribute attachments until you stop it. If you need to continuously monitor inboxes, you may never stop the service.

Note: To change the 1-minute idle time, see Appendix B: Changing the Service's Idle Time. This section is divided into the following:

Configuring the RJS Email Monitor Service

(Optional) Testing the RJS Email Monitor Service Starting RJS Email Monitor

Stopping RJS Email Monitor

Configuring the RJS Email Monitor Service

For the service to run, you need to configure it. There are two parts of configuring the service:

 Assigning a Windows log-on account.

 (Optional) Setting the service to start again automatically when the server is rebooted. To configure the service:

1. Click Start > Control Panel > Administrative Tools > Services. Services displays.

RJS Email Monitor User Guide

22

2. Scroll down to RJSEmailMonitor.

3. Right-click RJSEmailMonitor and click Properties. The service's properties display.

4. Click the Log On tab. Log On displays.

5. Choose to log on as This account and:

a. Click Browse and choose an account that has access to:

 All output folders.

 The temporary folder.

 The log folder.

b. In Password, type the password for this account. c. In Confirm Password, retype the password.

Starting and Stopping RJS Email Monitor

6. (Optional) Best Practice: Set the service to start again automatically when the server is rebooted. Under General in Startup Type, choose Automatic.

7. Click OK .

The service is assigned to the Windows log-on account you chose.

Testing the RJS Email Monitor Service

As a best practice, test the RJS Email Monitor service before you start it. To test the RJS Email Monitor service:

1. Under Monitor, click Run Once.

RJS Email Monitor runs once and distributes attachments with the filter criteria you set up. 2. Check the directories or WebDocs folders you distributed to and make sure that RJS Email

Monitor distributed attachments the way you want it to.

Starting RJS Email Monitor

To start the RJS Email Monitor service: 1. Under Monitor, click Start.

RJS Email Monitor User Guide

24

The service is started.

Note: You can now close the RJS Email Monitor Administration application. The RJS Email Monitor service continues to run in the background until you stop RJS Email Monitor.

Stopping RJS Email Monitor

To stop the RJS Email Monitor service: 1. Under Monitor, click Stop.

Appendices

The following appendices provide supplemental information:

Appendix A: Using the Log

Appendix B: Changing the Idle Time

Appendix A: Using the Log

This topic shows you how to view RJS Email Monitor's log. RJS Email Monitor records all file attachments it finds, converts, and distributes in its log. If you are having issues with RJS Email Monitor, you can also

configure RJS Email Monitor to log debugging information. To view the log:

1. In RJS Email Monitor Administration under Log, click View Log.

Today's log opens in the server's default text-editing program, such as Microsoft Notepad.

Note: Log files for previous days are saved in the directory you chose in Log File Folder.

Appendix B: Changing the Idle Time

RJS Email Monitor User Guide

26

1. On the RJS Email Monitor server, open the RJS Email Monitor program files folder. By default, this folder is C:\Program Files (x86)\RJS Software\RJS Email Monitor.

2. Open Settings.xml in a text-editing program, like Microsoft Notepad. Settings.xml displays.

3. Change the number between <Wait> and </Wait> to the new number of minutes.

4. Save Settings.xml. The idle time is changed.

Index

After Processing Option ... 14

Assigning Service to Windows Log-On Account ... 21

Attach Criteria ... 15

Attachment File Name Filtering by ... 15 Attachment Text ... 15 B Body Criteria ... 16 Body of Email Filtering by ... 16 Body Text ... 16 C Catch-All Filter ... 17 Changing Idle Time ... 25 Choosing Log Directory ... 10 Output Format ... 12 Save-To Directory ... 14 Temporary Directory ... 12 Configuring ... 9 Catch-All Filter ... 17 Database Settings ... 9 Destination ... 17

Email Monitor Settings ... 11

Filter ... 14

Inbox ... 13

Logging Settings ... 10

Mail Server Settings ... 11

Service ... 21

WebDocs Settings ... 12

Contacting RJS Software Systems ... 2

Converting ... 12 D Database Connection Testing ... 10 Database Settings Deleting Email ... 14 Destination Configuring ... 17 Directory ... 18 Distributing to ... 18 Distributing To a Directory ... 18 To WebDocs ... 18 Doc Type ... 19 E Email Monitor Settings Configuring ... 11 EML File Saving ... 14 Error Directory ... 11 F Filter By Attachment File Name ... 15

By Body of Email ... 16

By From Address... 16

By Subject of Email ... 17

Catch-All Filter ... 17

Configuring ... 14

Filter Set-Up Area ... 7

Folder ... 19 From Address Filtering by ... 16 From Criteria ... 16 From Text ... 16 I Idle Time Changing ... 25 Inbox Configuring ... 13

Inbox Filters Tab ... 7

Inbox Set-Up Area ... 7

Index Key ... 20 Installing ... 5 K Key ... 20 L Log Configuring ... 10 Viewing ... 25

RJS Email Monitor User Guide

28 M

Mail Server IP ... 11

Mail Server Settings Configuring ... 11

Microsoft SQL Server Configuring Database Settings ... 9

N Name (for Inbox) ... 13

O Opening ... 5

Output As ... 12

Output Format Converting ... 12

Output Set-Up Area ... 8

Output To ... 18

P Password For Email Inbox ... 13

For Microsoft SQL Server Database ... 10

For WebDocs ... 13 PDF Files ... 12 Converting to TIFF ... 12 Port ... 11 Priority ... 15 R RJS Email Monitor ... 5

Interface Areas Defined ... 6

RJS Software Systems ... 1, 2 Contacting ... 2

Technical Support ... 2

Run Error Directory ... 11

S Save to Folder ... 14 Saving EML File ... 14 Scope ... 15 Search Key ... 20 Server ... 9 Service ... 21

Changing Idle Time ... 25

Configuring ... 21 Starting ... 21, 23 Stopping ... 24 Testing ... 23 Setting Up Catch-All Filter ... 17 Destination ... 17 Filter ... 14 Inbox ... 13 Settings Tab ... 6

Starting RJS Email Monitor ... 21, 23 Stopping RJS Email Monitor ... 24

Subject Criteria ... 17 Subject of Email Filtering by ... 17 Subject Text ... 17 Support ... 2 T Technical Support ... 2 Temp Directory ... 12 Testing Database Connection ... 10 WebDocs Connection ... 13 Windows Service ... 23 TIFF Files ... 12 Converting to PDF ... 12 Title ... 20 Troubleshooting ... 2

Setting Debug Mode ... 10

Technical Support ... 2

Viewing Log ... 25

U User Name For Microsoft SQL Server Database ... 9

For WebDocs ... 13 V Variables ... 20 Version ... 2 Viewing Log ... 25 W WebDocs Configuring Settings ... 12 Distributing to ... 18

WebDocs - iSeries Edition ... 1

WebDocs - Windows Edition ... 1

Webservice URL ... 13

Windows Log-On Account Assigning to Service ... 21

Windows Service ... 21

Changing Idle Time ... 25

Configuring ... 21

Starting ... 21, 23 Stopping ... 24