METAL FINISHING HIGH PERFORMANCE CLEANING TECHNOLOGY WHAT S YOUR PROBLEM? ECOLOGICAL CLEANING CONCEPT SWISS QUALITY ISO 9001

(1)

WHAT’S YOUR PROBLEM ?

CLEANING TECHNOLOGY

METAL FINISHING

HIGH PERFORMANCE

ECOLOGICAL CLEANING CONCEPT

ISO 9001 CERTIFICAT SQS No. 11443 ISO 14001/ OHSAS 18001 CERTIFICAT SQS No. 30865

SWISS QUALITY

(2)

WHAT’S YOUR PROBLEM ?

SOLUTION

IN CHAPTER

_{TO REMOVE}

1.

POLISHING COMPOUNDS, OILS, ADHESIVE RESIDUES BY ULTRASONIC.

2.

OILS & GREASES BY SPRAY OR ULTRASONIC.

3.

PREPARATION PRIOR TO P.V.D.

4.

CLEANING & FINISHING PRIOR TO HOT AIR DRYING

5.

DEOXIDIZATION.

6.

PROTECTION AGAINST OXIDATION.

7.

TRIBO-FINISHING.

8.

REMOVING LACQUERS & VARNISH.

9.

REMOVING OILS OR ZAPON BY ULTRASONIC OR BY SPRAY.

10.

ANTI SCRATCH LACQUER.

11.

REMOVING OILS IN INTER-OPERATIONAL CLEANING :

BARREL-TOP DEGREASER / ULTRASONIC / TO REPLACE BENZINE CLEANERS.

12.

REMOVING SOLDERING FLUXES.

13.

CLEANING PARAMETERS CONTROL.

14.

DI WATER RINSE QUALITY CONTROL.3.

15.

WASTEWATER TREATMENT PROCESS.

16.

IMPURITIES PRECIPITATION SYSTEM.

(3)

NGL CLEANING TECHNOLOGY SA

7, chemin de la Vuarpillière • CH-1260 Nyon, Switzerland Tel.: +41 (0)22 365 46 66 • Fax: +41 (0)22 361 81 03 E-mail: [email protected]

THE COMPLETE SOLUTION: EXPERTISE in

CLEANING & RECYCLING PROCESSES

PRODUCTS

METAL FINISHING

Concentration : 3 to 5% Temperature : 55 to 70°C Time : 3 to 5 min

www.ngl-cleaning-technology.com

Concentration : 3 to 5% Temperature : 55 to 70°C Time : 3 to 5 min Concentration : 2 to 5% Temperature : 60 to 75°C Time : 3 to 5 min Concentration : 2 to 5% Temperature : 60 to 75°C Time : 2 to 5 min NB: with oil separator

PAGE 2

• POLISHING

COMPOUNDS

and OIL

RESIDUES

or

• ADHESIVE

RESIDUES

or

• OILS

• OILS &

GREASES

• ALL METALS • ALL METALS • ALL METALS •ALL METALS EXCEPT ALUMINIUM • BRASS • STEEL •H.S.S. • HARD METAL • STEEL • H.S.S. • STAINLESS-STEEL • HARD METAL

GALVEX 18.01

US

GALVEX 17.30

PLUS

(TARNISHING FREE ON COPPER METALS) US LINE

VACUKLEEN

(NO COBALT LEACHING)

GALVEX 17.30

SP.P

US

NANOCLEAN

• NANOCLEAN SUPRA • NANOCLEAN SUPRA • NANOCLEAN 100 • NANOCLEAN 100 • NANOCLEAN 95 • NANOCLEAN 95

DECOSPRAY TM

DECOSPRAY 347

DECOSPRAY 440

+

L

10.5 +

L

10.8 +

L

10.5 +

L

9.6 +

L

14 +

L/P

• PREPARA-TION prior to

P.V.D.

1

2

3

• ALL METALS EXCEPT ALUMINIUM

+

L

14

- emulsifying property - separates oils

- for large quantities of oils

See data sheet

+

L

13.7

To remove

_From

product

+/-

L/P

pH

Instructions

for use

SPRAY or US

LEGEND: + : BIODEGRADABLE - : NON BIODEGRADABLE

L/P : LIQUID or POWDER US : ULTRASONIC

(4)

• GLASS • SAPPHIRE • NICKEL SILVER • BRASS • STAINLESS STEEL • SENSITIVE STEEL • STEEL • H.S.S. • HARD METAL

NGL 17.40 P.SP

*

(DECONTAMINATION). US

FINISH 200

SUPER HELIT IC

US

GALVEX 17.89

SUPRA

LINE

ACID CLEANER

KORROSTOP 5000

Concentration : 5 to 20 g/l Temperature : 40 to 70°C Time : 1 to 5 min

*Liquid version: HELIT FINISH

Light alloys : GP 17.40 SUP.

+

P

9.3 • FINISHING

prior to HOT

AIR DRYING

4

Concentration : 3 to 5% Temperature : 45 to 65°C Time : 2 to 5 min *on polished aluminium

+

L

< 1

+

L

7.7 +

L

9.9 • OXIDATION

and OILS

• PROTECTION

ANTI

OXIDATION

US • STEEL

(in final DI water)

LINE

TRIBO

+

L

12.3

Concentration : 0,02 to 0,1%Temperature : 20 to 30°C Time : 2 to 3 min

7

• TUMBLING

5

6 +

L

See data sheet

PRODUCTS

METAL FINISHING

7

• BRASS

• COPPER ALLOYS See data sheet

To remove

From

_product

+/-

L/P

pH

Instructions

_{for use}

SPRAY or US

(5)

NGL CLEANING TECHNOLOGY SA

7, chemin de la Vuarpillière • CH-1260 Nyon, Switzerland Tel.: +41 (0)22 365 46 66 • Fax: +41 (0)22 361 81 03 E-mail: [email protected]

THE COMPLETE SOLUTION: EXPERTISE in

CLEANING & RECYCLING PROCESSES

www.ngl-cleaning-technology.com

PAGE 4

ALLSTRIP

+

L

n.m.

+

L

n.m.

• VARNISH

• LACQUER

• PITCH

Concentration : 100% Temperature : 20 to 40°C Time : 2 to 10 min

• OILS

• ZAPON

9 RUBIFIN N

RUBIFIN N

°

4

• ALL METALS Concentration : 100% Température : 20 to 40°C Time : 3 to 10 min

• ANTI

SCRATCH

LACQUER

• OILS

(TO SUBSTITUTE SOLVENT)

• OILS

GRINDING

& POLISHING

COMPOUNDS

10

• ALL METALS • aerosol : SCHUTZLACK NGL 2002 ROSE • spray or dipping : SCHUTZLACK NGL 2005 ROSE SPL

SCHUTZLACK NGL

-

L

n.m

BIO-TOP 10

Concentration : 2 to 10% Temperature : 25 to 60°C Time : 2 to 10 min.

+

L

7.5

Concentration : 2 to 5% Temperature : 65°C Time : 3 to 10 min

NEOCLEAN SUPER

8

11 +

L

10.5

• FLUX

ELECTRONICS

12

• PCB’S • RACK CLEANER

NGL 17.13 SUPER

-

L

9.3

• ALL METALS • SYNTHETIC STONES •ALL METALS (MANUAL CLEANING)

PRODUCTS

METAL FINISHING

GREEN LINE

To remove

From

_product

+/-

L/P

pH

Instructions

_{for use}

(6)

NGL EQUIPMENT

Objectif

Equipement

Principe

Measuring of

physical-chemical parameters

having an influence on the

cleaning quality

UPC 3000

ULTRASONIC PROCESS

CONTROLLER

Simple and quick control of the para-meters with 3 sensors (Complete do-cumentation at request).

ACC 2000

ACQUA CLEAN CONTROL

Enables a quick optional control of Di water quality. It complements conduc-tivity measurement.

Simple and quick control

of rinsing water quality

13

14 Impurities precipitation

system

DECOFLOC MB

Easy separation of solid particles from aqueous fluids (quartz, cerium and aluminium oxides, silicium carbide). Only one reagent with unique proper-ties.

Waste water processes

prior to disposal

DECOFLOC 770

DECOFLOC 660

DECOFLOC HF

insolubility of metals agent for coagulation agent for flocculation

16

15 DECOFLOC IPS

(Impurities Precipitation System)

˚˚

mechanico-chemical polishing waste

˚˚

cutting waste

˚˚

rectification and milling emulsions

nonstop treatment process

N

(7)

PROCESS

RELIABILITY

IN HIGH PRECISION

CLEANING PROCESSES

FOR THE HIGH-TECH

PIONEER

NGL CLEANING TECHNOLOGY SA

7, Ch. de la Vuarpillière • CH 1260 NYON - Switzerland Tél.+41(0) 22 365.46.66 • Fax: +41(0) 22 361.81.03 E-mail: [email protected] Web: www.ngl-cleaning-technology.com A - MARCH 2011 DISTRIBUTEUR: ISO 9001 CERTIFICATE SQS No. 11443 ISO 14001/ OHSAS 18001 CERTIFICATE SQS No. 30865