Operating System Assignment

(1)

ASIA PACIFIC UNIVERSITY | 1 GROUP ASSIGNMENT

NAME: DARINI SHAMUGAVEL (TP025581)

KESAVARAJA A/L TAMILSELVEN (TP025205)

KRISHAN KUMAR A/L LOGENDREN (TP024436)

INTAKE CODE: UCD2F1207 DIT/SE

SUBJECT: OPERATING SYSTEMS (AICT004-3-2-OS)

PROJECT TITLE: A DETAILED RESEARCH ON WINDOWS 7 OPERATING SYSTEM

DATE ASSIGNED: 24th JULY 2012

DATE COMPELETED: 5th OCTOBER2012 LECTURER: MISS AKANSHA MANDHANA

(2)

[A DETAILED RESEARCH ON WINDOWS 7

OPERATING SYSYTEM] January 1, 2012

ASIA PACIFIC UNIVERSITY | 2 Table of Contents

Table of Figures ... 3

Research and Investigation ... 4

Introduction ... 4

System Hardware Requirements ... 6

Memory Management ... 7 Installation ... 8 ... 10 ... 11 Analysis ... 22 User Interface ... 22

Process Control Management ... 29

Deadlock Management ... 31

Memory Management ... 33

Secondary Disk Scheduling Management ... 40

Standard Support ... 41 Conclusion ... 42 Gantt chart ... 43 Workload Matrix ... 43 Minutes of Meetings ... 45 References ... 46

(3)

ASIA PACIFIC UNIVERSITY | Table of Figures 3

Figure 1 ... 4

Figure 2- Windows 7 boot from CD ... 8

Figure 3- Loading installation files ... 8

Figure 4- Windows 7 setup loaded successfully ... 9

Figure 5- Selecting language and other preferences ... 9

Figure 6- Clicking the install button ... 10

Figure 7- Waiting for Windows 7 setup to start ... 10

Figure 8- Windows 7 Licence Terms ... 11

Figure 9- Type of Installations ... 11

Figure 10- Location to install Windows 7 ... 12

Figure 11- Installing Windows 7 ... 12

Figure 12- Restarting Windows ... 13

Figure 13- Starting of Windows 7... 13

Figure 14- Registry Settings ... 14

Figure 15- Starting up Windows ... 14

Figure 16- Completing Installation ... 15

Figure 17- Starting computer automatically ... 15

Figure 18- Windows 7 starting... 16

Figure 19- Setup is preparing your computer for first use ... 16

Figure 20- Checking for video performance ... 17

Figure 21- User name and Computer Name ... 17

Figure 22- Setting up a password. ... 18

Figure 23- Typing Windows Product Key ... 18

Figure 24- Windows update option ... 19

Figure 25- Reviewing time and date settings ... 19

Figure 26-Selecting computer's current location ... 20

Figure 27- Waiting to connect to a network ... 20

Figure 28- Preparing desktop ... 21

Figure 29- Installation of Windows 7 is complete ... 21

Figure 30- Snapshot of Aero Peek feature ... 23

Figure 31- Snapshot of Aero Snap feature ... 24

Figure 32-Snapshot of Windows 7 taskbar ... 25

Figure 33-Snapshot of Computer Screen ... 26

Figure 34- Snapshot of Quick Search ... 26

Figure 35- Snapshot of Start menu ... 27

Figure 36 shows the diagram for process control management ... 30

Figure 37- a full of screen menu ... 35

(4)

ASIA PACIFIC UNIVERSITY | 4

Research and Investigation

Introduction

In today‟s technological world “Operating Systems” would be familiar to most people. The basic and one of the earliest definitions can be said as a system which takes input from different sources, processes them based on predesigned instructions within it and provides meaningful outputs. The operating system is commonly referred by its acronym “OS”. (Basics of Operating Systems, 2006-2012)

Figure 1

An operating system is a program that acts as an intermediary between a computer user and the computer hardware. Operating system carries out the basic jobs like accepting commands from the user, provides desired services to the user and user programs, controlling and giving priority to the system requirements, assigning the memory and organizing file systems. There are various types of operating system which is developed worldwide and being used for various purposes on various platforms and devices.

(5)

ASIA PACIFIC UNIVERSITY | Research and Investigation 5 One of the most common Graphical User Interface Operating Systems is Windows. Concerning to our assignment title, our group chose the Windows 7 Operating System. Windows 7 is a multi tasking operating system which is developed by Microsoft for the public in 2009.

Windows 7 has a 64-bit along with the availability of 32 bit support which enables the users to use almost all the latest PC‟s. Windows 7 supports them all. There are six versions of Microsoft Windows 7 which are the Starter, Home Basic, Home Premium, and Professional, Ultimate and Enterprise in order to home and business/enterprise purposes. Windows 7 was launched with many new and advanced features which are beneficial to users. Before the development of Windows 7, there were few other operating systems that have been introduced into the world of computing. Those operating systems are Windows 95, 98, 2000 and ME.

(6)

ASIA PACIFIC UNIVERSITY | Research and Investigation 6 System Hardware Requirements

In order for Windows 7 to run smoothly, Windows 7 has certain requirements that your computer must meet. They are as follows:

 I gigahertz processor

 1 gigabyte of RAM ( For 32 bit) and 2 gigabyte of RAM ( For 64 bit)  16 gigabyte ( For 32 bit ) and 20 gigabyte ( For 64 bit) hard drive

 DirectX 9 compatible graphics device with WDDM 1.0 or higher driver.

(7)

ASIA PACIFIC UNIVERSITY | Research and Investigation 7 Memory Management

The table shows the comparison between Windows 7 and XP

 32-bit and bit refer to the way a computer's processor handles information. The 64-bit version of Windows handles large amounts of random access memory (RAM) more effectively than a 32-bit system.

(8)

ASIA PACIFIC UNIVERSITY | Installation 8

Installation

Figure 2- Windows 7 boot from CD

 To begin Windows 7 installation process, user will need to boot from Windows 7 CD and press any key to start the boot from CD.

Figure 3- Loading installation files

(9)

ASIA PACIFIC UNIVERSITY | Installation 9 Figure 4- Windows 7 setup loaded successfully

 After the windows 7 setup is loaded completely, Windows is starting by itself and it is indicating that the setup process is about to begin.

Figure 5- Selecting language and other preferences

 Users would have to select the preferred language, time and currency format, and keyboard or input method and click next to continue.

(10)

ASIA PACIFIC UNIVERSITY | 10 Figure 6- Clicking the install button

 Click on the Install button to continue

Figure 7- Waiting for Windows 7 setup to start

(11)

ASIA PACIFIC UNIVERSITY | 11 Figure 8- Windows 7 License Terms

 The textbox is containing Windows 7 Software Licence Terms. Accept the terms and click next to continue.

Figure 9- Type of Installations

 There are two choices which are Upgrade and Custom Installation. Users can choose any of the type according to their preference.

(12)

ASIA PACIFIC UNIVERSITY | 12 Figure 10- Location to install Windows 7

 Users will have to choose the location to install Windows 7 and click next to continue.

Figure 11- Installing Windows 7

 Windows is now being installed in the selected location that the user has chose in the previous step.

(13)

ASIA PACIFIC UNIVERSITY | 13 Figure 12- Restarting Windows

 Installation is complete and restarting of the Windows is a must after installation.

Figure 13- Starting of Windows 7

(14)

ASIA PACIFIC UNIVERSITY | 14 Figure 14- Registry Settings

 Windows 7 setup is now updating its registry settings to prepare the final stages of the operating system installation.

Figure 15- Starting up Windows

(15)

ASIA PACIFIC UNIVERSITY | 15 Figure 16- Completing Installation

 Windows 7 is finally completing its installation.

Figure 17- Starting computer automatically

(16)

ASIA PACIFIC UNIVERSITY | 16 Figure 18- Windows 7 starting

 Users will have to wait till Windows 7 starts.

Figure 19- Setup is preparing your computer for first use

(17)

ASIA PACIFIC UNIVERSITY | 17 Figure 20- Checking for video performance

 Users will have to wait again till the setup process to check the video performance is done.

Figure 21- User name and Computer Name

 Windows 7 needs to know what use name you'd like to use and how you'd like your computer to be identified on your local network.

(18)

ASIA PACIFIC UNIVERSITY | 18 Figure 22- Setting up a password.

 Microsoft recommends users to choose a password that will be required when starting Windows 7 before accessing to your user account.

Figure 23- Typing Windows Product Key

 Enter the product key that came with your retail purchase or legal download of Windows 7.

(19)

ASIA PACIFIC UNIVERSITY | 19 Figure 24- Windows update option

 Windows 7 is asking users to choose how users want to automatically install updates from Microsoft's Windows Update service.

Figure 25- Reviewing time and date settings

(20)

ASIA PACIFIC UNIVERSITY | 20 Figure 26-Selecting computer's current location

 Users need to select your computer's current location window

Figure 27- Waiting to connect to a network

(21)

ASIA PACIFIC UNIVERSITY | 21 Figure 28- Preparing desktop

 Now, Windows 7 is preparing your desktop.

Figure 29- Installation of Windows 7 is complete  This completes the final step of your new installed Windows 7.

(22)

ASIA PACIFIC UNIVERSITY | Analysis 22

Analysis

User Interface

A user interface also called as “UI” or simply an “interface” is the means in which a person controls a software application or hardware device. A good user interface provides a “user-friendly” experience, allowing the user to interact with the software or hardware in a natural and spontaneous way. Nearly all software programs and operating systems have a graphical user interface or known as “GUI”. The programs includes graphical controls, which the user can select using a mouse or keyboard. (TechTerms.com, 2009) .

A typical GUI consists of a menu bar, toolbar, windows, buttons, icons and other controls to carry out commands such as creating file, deleting a file, opening a browser, closing the browser and etc. GUI is not like the command line operating system, where we need to memorize specific commands to open a specific application/program. GUI is easier for the end user to use and learn with just having basic knowledge of computer.

Examples of GUI are:

 Windows 7

 Mac OS Mountain Lion  Linux

Windows 7 has many new features and enhancements. Upon adding to the features, Windows Aero is added to Windows 7 and it is a type of user interface and although it looks similar to the older interface in many ways, it is actually quite different. The visible changes a user can see on the user interface are as follows:

(23)

ASIA PACIFIC UNIVERSITY | Analysis 23 1. Aero Peek

Figure 30- Snapshot of Aero Peek feature

One of Windows 7 features is called Aero Peek is shown in Figure 30. Aero Peek is available on Home Premium Edition, Professional Edition, and Ultimate Edition. Aero Peek allows users to “see through” or X-Ray visions all of the current open windows on the display so that they can see straight to the items on the Windows 7 desktop. For example, users have three word documents open. The word icon will appear on the taskbar and it is highlighted to indicate that the word document is running. To access into those specific windows, it is done by pointing the mouse to the right edge of the Windows taskbar which actually forces all the open tabs to become transparent, allowing the user to “see through” and review those tabs on the desktop background.

(24)

ASIA PACIFIC UNIVERSITY | Analysis 24 2. Aero Snap

Figure 31- Snapshot of Aero Snap feature

Source: http://www.petri.co.il/new-aero-features-in-windows-7.htm

Figure 31 shows another feature of Windows 7 is Aero Snap. It is available on all versions of Windows. Aero Snap is a quick way for users to resize open windows by simply dragging them to the edges of the desktop. For example, if a user has two word documents opened in a display mode and wants to compare them side by side, all they have to do is leverage snap by clicking and dragging one document to the extreme left of the screen which snaps 50% of the view able space. To get the other window in a similar view, they would just need drag it to the extreme right side.

(25)

ASIA PACIFIC UNIVERSITY | Analysis 25 1. The Taskbar

Figure 32-Snapshot of Windows 7 taskbar

The new Windows 7 taskbar shown in Figure 32 is considerably different from previous incarnations of Windows. It combines with the earlier taskbars which was place to show which programs were open and allow user to switch between programs. Users can now “pin” programs to taskbar which will place a shortcut to that program directly on the taskbar. In the taskbar, these are the things users can see clearly:

 Display Desktop – This feature will hide all open windows allowing the user to view their full Desktop.

 Notification Area – Displays any programs you have running in the background (such as a virus scanning program) and displays the time and date.

(Smith, 2012)

2. Computer Screen

The computer screen (formerly known as My Computer) shown in Figure 33 has changed slightly in Windows 7. Along with showing all of the various drives attached to your computer, you also have an “Explorer” type view on the left side that will allow you easy access to the contents of those drives. (Smith, 2012)

(26)

ASIA PACIFIC UNIVERSITY | Analysis 26 Figure 33-Snapshot of Computer Screen

3. Quick Search

Have you ever opened a window, such as the Control Panel, and have trouble finding what you are looking for? Windows 7 allows users to search individual windows through Quick Search. In our example the user was able to find Windows Update by typing the word “update” (without quotations) in the search filed located in the top right corner of the window. The Quick Search field is available most windows. (Smith, 2012)

(27)

ASIA PACIFIC UNIVERSITY | Analysis 27 Figure 35 shows the start menu. It is the main gateway to your computer‟s programs, folders and settings. As the “Start” implies, it‟s often the place where users will go to start or open programs. Users would find the “Start Menu” in Windows 7 is easier to use as the icons are large enough and it‟s arranged accordingly to alphabetically order. (Windows, 2012)

(28)

ASIA PACIFIC UNIVERSITY | Analysis 28 The “Start Menu” is divided into three basic parts:

 The large left pane shows a short listed of programs installed in your computer. Clicking on „All Programs‟ displays a complete list of programs installed.

 In the lower left corner is the search box which allows users to search for programs by typing in.

 The right pane shows the access to commonly used folders and files. It is also where you go to log off from Windows or turn of your whole machine.

(29)

ASIA PACIFIC UNIVERSITY | Analysis 29 Process control management can define as a multiprogramming method that runs multiple processers. The process allocates a priority and executes at any time, while the other process will be waiting for execute or performing I/O. A process is sequential in a program implementation with requirement of memory, CPU time, and documents to absolute its task. (Singh, 2010) During a process execution time those resources are allocated and if the program is reactive at the same time as active process.

Process involves central process units that contain a set of instruction that called threats. Each one instruction files contains each application that written by programmers. (Microsoft, 2012) Threats are spawned by process that creates through an application and the operation system runs. Windows 7 operating system is real time software that requires process control management. The operating system supports round robin scheduling algorithm for real time range treads.

Windows 7 is a multitasking operating system which can runs multiple applications at one time. This application allows switching one treads to another rapidly and synchronized. It is enhanced with preemptive multitasking process that single can be intermittent by another process during execution completed. Windows 7 uses a control block with priority level and time window system which control the arrangement of process and threads if occurs interruption.

(30)

ASIA PACIFIC UNIVERSITY | Analysis 30 Figure 36 shows the diagram for process control management

Source: http://www.srinivasbt.com/linux/process.htm

The central process unit checks to observe either needs to switch to other threads is depends on the time that given for each treads for execution before. If the tread cant doesn‟t finish its task at time, CPU will switch to next tread and the first process will be at waiting point until the execution done. Preemption of treads only can happen before the current tread quantum is finishes. A priority level assigned for treads and process allows a systematic pre-empt or execution. There are two types of scheduling process which real-time priority level will be 16–31 and Dynamic priority 1-15. Higher level priority has superior probability to pre-empt over current treads that executing or next quantum. Central process unit will confine the treads that not finish executes because of preemption and resume on the earlier processors that ran it. (Byron Wright, 2012)

(31)

ASIA PACIFIC UNIVERSITY | Analysis 31 Deadlock Management

A set of process have a deadlock, if each process is waiting for an event that only another process in the set can cause. In other words, each member of the set of deadlock processes is waiting for a resource that can be released only by a deadlock process. None of the processes can run, can release any resources, and can be awakened.

 Example, Deadlock is where process 1 has been allocated non-shareable resources A, say, a tap drive, and process 2 has be allocated non-sharable resource B, say, a printer. Now, if it turns out that process 1 needs resource B to proceed and process 2 needs resource A to proceed and these are the only two processes in the system, each is blocked the other and all useful work in the system stops. This situation is termed deadlock. The system is in deadlock state because each process holds a resource being requested by the other process neither process is willing to release the resource it holds. (techforum4u,2012)

Conditions for deadlock

There are four conditions in deadlock. Deadlock can only exist if 4 conditions hold simultaneously:

I. Mutual Exclusion

The resources involved are non-shareable.

Explanation: Only one process at a time can use at least one resource.

II. ‘Hold and Wait’

Requesting process hold already, resources while waiting for requested resources.

(32)

ASIA PACIFIC UNIVERSITY | Analysis 32 III. No Pre-emption

Resources cannot be preempted.

Explanation: Once a process holds a resource, it cannot be taken away by another process or the kernel.

IV. Circular wait

One process waits for another in a circular fashion

Explanation: Process A waits for Process B waits for Process C.... waits for Process A.

Method for Handling Deadlock

There are 3 simple methods to handling deadlock. There are,

I. Use a protocol to prevent or avoid deadlocks, ensuring that the system will never enter a deadlock state.

 Deadlock Prevention- provides a set of methods for ensuring that at least one of the necessary conditions

 Deadlock avoidance- requires that the OS be given in advance additional information concerning which resources a process will request and use during its life time.

II. Allow the system to enter a deadlock state, detect it, and recover.

(33)

ASIA PACIFIC UNIVERSITY | Analysis 33 Memory Management

Windows 7 Memory Management

Windows 7 memory manager tools virtual memory provides a hub set of services such as memory mapped files, copy-on-write memory, large memory support, and underlying support for the cache manager. Each process on 32-bit Microsoft Windows has its individual virtual address space that enables addressing up to 4 gigabytes of memory. Each process on 64-bit Windows has a virtual address space of 8 terabytes. All threads of a process can access its virtual address space. However, threads cannot access memory that belongs to another process, which protects a process from being corrupted by another process. (Memory management, 2012)

Virtual Address Space

Address space for each process is private and cannot accessed by other processes unless if it is shared. Virtual address does not represent the real physical site of an object in memory. Each time a thread references an address, the system translates the virtual address to a physical address. The virtual address space for 32-bit Windows is 4 gigabytes (GB) in size and divided into two partitions: one for use by the process and the other reserved for use by the system (Virtual Address Space, 2012)

Memory Pools

Memory manager creates the following memory pools that the system uses to assign memory, nonpaged and paged pool. Both memory pools are located in the region of the address space that is reserved for the system. The nonpaged pool consists of virtual memory addresses that are guaranteed to reside in physical memory while paged pool consists of virtual memory that can be paged in and out of the system. To develop performance, systems with a single processor have three paged pools, and multiprocessor systems have five paged pools. (Memory pools, 2012)

(34)

ASIA PACIFIC UNIVERSITY | Analysis 34 Virtual Memory Function

The virtual memory functions enable a process to manipulate the status of pages in its virtual address space. They are,

 Reserve a range of a process's virtual address space.

 Assign a range of reserved pages in a process's virtual address space.

 Indicate read/write, read-only, or no access for a range of committed pages.

 Making the range of virtual addresses existing for following allocation operations by the calling process.

 Reassign a series of committed pages, releasing their physical storage and making it available for subsequent allocation by any process.

 Lock one or more pages of committed memory into physical memory (RAM)

 Get information about a range of pages in the virtual address space of the particular process.

 Change the access protection for a particular range of committed pages in the virtual address space of the particular process. (Virtual Memory Function, 2012)

(35)

ASIA PACIFIC UNIVERSITY | Analysis 35  Task Manager provides information about programs and processes running on your

computer. The easiest way to access the Task Manager in Windows 7 is by pressing

Ctrl+Alt+Delete, then click Start Task Manager.

Figure 37- a full of screen menu In Application Tab, you can end, switch to, or start a program.

(36)

ASIA PACIFIC UNIVERSITY | Analysis 36 Processes Tab provides you very detailed information about the processes running on

your computer.

Figure 38- shows the description column, which identifies each process

Services Tab provides with a convenient way to quick review the services that are running while troubleshooting.

(37)

ASIA PACIFIC UNIVERSITY | Analysis 37 The most commonly accessed tab in Task Manager is the Performance tab.

Figure 41- shows the Performance Tab Physical Memory (MB):

 Total entry shows the amount of RAM installed in the system.

 The Cached entry indicates the amount of physical memory used recently for system resources.

 The Available entry shows the amount of physical memory that is currently not being used.

 The Free entry shows the amount of memory used recently in the cached but does not contain useful information.

Kernel Memory (MB):

 The Paged and Nonpaged entries break down the total amount of memory being used by the kernel and show you how much of it is coming from virtual memory and how much is coming from physical memory, separately.

(38)

ASIA PACIFIC UNIVERSITY | Analysis 38 System:

 The Handles entry shows the number of object identifiers currently is use by all running processes.

 Threads entry shows to refer to the number of sub-processes running inside of larger processes.

 The processes entry, represent the number of currently running processes. In addition, you can see the each of the current running processes by selecting the Processes tab.  The Up Time entry shows the amount of time that has passed since the computer has

been restarted.

 Commit entry is a simple measurement that shows Page File usage. Here, the first number shows the total number of physical and virtual memory currently in use, and the second number indicated the total amount of physical and virtual memory available on your computer.

When you access on the Networking tab, you can view network status and see how your network is functioning.

(39)

ASIA PACIFIC UNIVERSITY | Analysis 39 Figure 43- shows the user

Resource Monitor

By clicking the button at the bottom of the Performance tab in Task Manager, The Memory tab shows how your memory is being used, with detailed information for each process and a colorful Physical Memory bar graph to show exactly what's happening with your memory. (Windows 7 memory management, 2012)

(40)

ASIA PACIFIC UNIVERSITY | Analysis 40 Secondary Disk Scheduling Management

Disk scheduling management is a process that system resources which shared by threads, processors or else data flow. The secondary disk scheduling is a media configuration that evolution of magnetic tapes towards disk. Secondary disk scheduling consists of single dimensional arrays of logical blocks. Those logical blocks are mapped onto the disk according to string of arrays. Disk is known as huge secondary storage contributor and also characterized quick access time with bandwidth. Seek time and rotational latency is two key constituents of the access time.

Windows 7 operating system disk scheduling based on shortest seeks time algorithm which service based on the demand that nearest to the existing head with the in spite of direction. (Howard J. Hamilton, n.d.)

The image above shows the requested once-over is according to the shortest distance request.

Which the head request that starts from 50 and proceeds to 42 because according to the SSTF scheduling the nearest request will respond immediately compared to others, and then followed by the next request which is 60 instead of 70 because its only 18 tracks which can be classified the nearest request, until it is completely finished until the ending.

(41)

ASIA PACIFIC UNIVERSITY | Analysis 41 All operating systems have their own standard support so does Windows 7. It is important for users to know the standard support for their operating system. There are many types of standard support provided by Windows. Users could visit Microsoft page to obtain help. Besides that, there is a fix and solution center. This helps users to find automated solutions for user‟s issues. Microsoft answers are also available for users where users can post questions or browse for solutions in the Windows 7 forums.

There is also customer service assistance. Users may go see these people personally about Microsoft products and services. Third party support is also available such as OEM (original equipment manufacturer). User must visit OEM contact page to learn how to tell whether your installation is OEM. If you Microsoft product is pre-installed, distributed with your computer, or obtained as an upgrade directly from your computer manufacturer, the primary source for support is the original equipment manufacturer (OEM) who provided the Microsoft product.

Lastly but not least, users can get Microsoft Technical Support. Users will have to contact a Microsoft support professional, click on the product and version below that is applicable to you. They will ask few questions to help determine what your support options are. The support options may include email, on-line submission or phone support. (Microsoft, Windows, 2012)

(42)

ASIA PACIFIC UNIVERSITY | Analysis 42 Conclusion

This comes to end of our group assignment. Upon completing this assignment together, we have learned in detail about Windows 7 and its unique features. On the other hand, we also learned about the drawbacks in certain operating systems. We would take this opportunity to thank our lecturer, Miss Akansha for guiding us throughout the whole assignment and having the patience to bear with us throughout this whole semester.

(43)

ASIA PACIFIC UNIVERSITY | Analysis 43 Gantt chart

(44)

ASIA PACIFIC UNIVERSITY | Analysis 44 Workload Matrix

Name Task/Responsibility Signature

Darini Shanmugavel (TP025581)  Introduction  Installation  User Interface  Standard Support  Minutes of Meeting  Workload Matrix  Compilation of whole assignment Kesavaraja a/l Tamilselven

(TP025205)  Introduction  Comparison of Memory Management  Memory Management  Deadlock Management  Minutes of Meeting Krishan Kumar (TP0)  Introduction

 Process Control Management  Secondary Disk Scheduling

Management  Gantt Chart

(45)

ASIA PACIFIC UNIVERSITY | Analysis 45 Minutes of Meetings

Date Time Venue Members Attended Topic Discussed

31st July 2012  10.30-11.00am  TPM  Darini  Kesav  Krishan  Understanding the assignment  Tasks have been

divided equally to all members. 7th August 2012  10.30- 11.45am  TPM  Darini  Kesav  Krishan  Research and Investigation has been done.  Documentation for this part is completed. 21st August 2012  10.30-11.45am  TPM  Darini  Kesav  Krishan  Report Progress  Discussion on analysis part 4th September 2012  10.30-11.15am  TPM  Darini  Kesav  Krishan  Report Progress  Discussion on what

has been completed by group members 18th September 2012  10.00-11.15am  TPM  Darini  Kesav  Krishan  Report Progress  Discussion of Windows 7 Installation 25th September 2012  10.00-11.30am  TPM  Darini  Kesav  Krishan  Presentation slides

(46)

ASIA PACIFIC UNIVERSITY | Analysis 46 References

1. Altiusdirectory.com (2000) Operating Systems, Basics, Types, Tasks, Operating

Systems for Computers, Softwares, Resources, Standards.. [online] Available at:

http://www.altiusdirectory.com/Computers/operating-systems.html [Accessed: 3 Oct 2012].

2. Bagaria, B. (2011) How To Install Windows 7 (Step-By-Step Tutorial With

Screenshots) | door2windows. [online] Available at:

http://www.door2windows.com/how-to-install-windows-7/ [Accessed: 3 Oct 2012]. 3. Support.microsoft.com (n.d.) Microsoft Support. [online] Available at:

http://support.microsoft.com/ph/14019 [Accessed: 3 Oct 2012].

4. Techterms.com (2009) User Interface Definition. [online] Available at: http://www.techterms.com/definition/user_interface [Accessed: 3 Oct 2012]. 5. Windows.microsoft.com (2012) Windows 7 system requirements - Microsoft

Windows. [online] Available at:

http://windows.microsoft.com/en-MY/windows7/products/system-requirements?SignedIn=1 [Accessed: 3 Oct 2012]. 6. Support.microsoft.com (2010) Support for Windows 7. [online] Available at:

http://support.microsoft.com/ph/14019 [Accessed: 3 Oct 2012].

7. Windows.microsoft.com (2012) Microsoft Windows. [online] Available at: http://windows.microsoft.com [Accessed: 3 Oct 2012].

8. Www2.cs.uregina.ca (n.d.) Scheduling of Processes. [online] Available at:

http://www2.cs.uregina.ca/~hamilton/courses/330/notes/scheduling/scheduling.html [Accessed: 3 Oct 2012].

9. 1Cs.rpi.edu (n.d.) Deadlock. [online] Available at:

http://www.cs.rpi.edu/academics/courses/fall04/os/c10/index.html [Accessed: 13 September 2012].

10. Msdn.microsoft.com (2012) Virtual Address Space. [online] Available at:

http://msdn.microsoft.com/en-us/library/windows/desktop/aa366912 [Accessed: 14 September 2012].

(47)

ASIA PACIFIC UNIVERSITY | Analysis 47 http://msdn.microsoft.com/en-us/library/windows/desktop/aa965226(v=vs.85).aspx [Accessed: 15 September 2012].

12. Msdn.microsoft.com (2012) Virtual Memory Functions. [online] Available at: http://msdn.microsoft.com/en-us/library/windows/desktop/aa366916(v=vs.85).aspx [Accessed: 23 September 2012].

13. Siber.cankaya.edu.tr (n.d.) Methods for Handling Deadlocks. [online] Available at: http://siber.cankaya.edu.tr/ozdogan/OperatingSystems/ceng328/node157.html [Accessed: 23 September 2012].

14. Hightech-edge.com (2008) Windows Task Manager Explained | HighTech EDGE. [online] Available at: http://www.hightech-edge.com/windows-task-manager-overview/1243/ [Accessed: 25 September 2012].