Solid-State Lighting Series
6W MR16
DATASHEET
www.edison-opto.com
Features
■ Ecologically Friendly ■ Energy Efficient
■ High Brightness LED Light source
Revision History ... 8
About Edison Opto ... 9
Package Information ... 8
General Information ... 1
Product Dimensions ... 2
Light Patterns ... 4
Product Information ... 3
Technical Data ... 3
Applications ... 5
... 6
Environmental Friendly Product Safety ... 7
6W MR16 DATASHEET www.edison-opto.com
Edison Opto 6W MR16 is based on high brightness LED source which provides a superior light illuminance. It is ideal for using in recessed, ceiling mounted and suspended light fixtures.
The lamp features standard MR16 bi-pin, which can easily switch and replace from a standard halo- gen MR16 bulb.Moreover, the product can be used in hard-to-reach locations to prevent regular maintenance needs. Furthermore, the multi- selection on various colors provides a great experience in decorative and mood lighting applications.
General Information
Introduction
6W MR16 DATASHEET
Ø2”
[Ø50mm]
Ø2”
[Ø50mm]
Ø1 5/8”
[Ø42 mm]
Ø2”
[Ø50mm]
6W MR16 DATASHEET www.edison-opto.com
Tolerance: ±2.5 mm
Product Dimensions
Parameter Rating / Value Units
Power Consumption 6 W
Color Temperature 5,700/4,000/3,000/2,700 K
AC/DC Input Voltage 12 V
CRI CW≥80
NW≥80
WW≥80 --
Weight 45 ± 5 g
Base GU5.3 --
Operating Temperature -20 ~ +40 °C
Storage Temperature -40 ~ +60 °C
WATT COLOR ANGLE DRIVER COVER BASE
Code Type Code Type Code Type Code Type Code Type Code Type
06 6W 57 CW
(5,700K) 2 20~29 0 No
Driver W0 White 05 GU5.3
(MR16)
40 NW
(4,000K) 3 30~39 7 AC/
DC12V
30 WW
(3,000K)
27 WW
(2,700K)
WATT COLOR ANGLE DRIVER COVER BASE
Code Type Code Type Code Type Code Type Code Type Code Type
06 6W 57 CW
(5,700K) 2 20~29 0 No
Driver W0 White 05 GU5.3
(MR16)
40 NW
(4,000K) 3 30~39 7 AC/
DC12V
30 WW
(3,000K)
27 WW
(2,700K)
Product Type Product Order Code
6W MR16 7-MR16-11
Technical Data
Notes:
1. Power consumption has 10% tolerance.
2. Color rendering index (CRI) is measured with accuracy in minimum.
3. Weight has ± 5 g tolerance.
4. The operating temperature* is based on the ambient temperature to the heatsink in 5 cm distance.
6W MR16 DATASHEET www.edison-opto.com
Note:
Available selection of Color, Beam angle, Driver.
Product Information
Power Consumption (W) Beam Angle Color Typ. Flux (lm) Typ. Lux @1m (lx)
6W 15W
25°
Cool White 560 2,200
Neutral White 560 2,200
Warm White 500 2,000
38°
Cool White 560 1,400
Neutral White 560 1,400
Warm White 500 1,350
Light Patterns Technical Data
6W MR16 DATASHEET www.edison-opto.com
• Beam Angle 25˚
0 15 15
105 90 75 60 45
30 90
75 60 45
30 105 Notes:
1. LED is a dynamic and constantly evolving technology. The final lux output of your 6W MR16 may vary.
2. Angle has ±5° tolerance.
0.40 0.60 0.80
• Beam Angle 38˚
0 15 15
105 90 75 60 45
30 90
75 60 45
30 105
0.40 0.60 0.80
Recessed and suspended fixtures apply Ceiling mounted fixtures apply
Retail stores, Hotel, Showroom
6W MR16 DATASHEET www.edison-opto.com
Applications
6W MR16 DATASHEET www.edison-opto.com
Environmentally Friendly
6W MR16 VS 50W Halogen
To look at the increased demand of energy and the effect on global warming, Edison Opto plays the role in preserving the forest by reducing energy consumption, and CO2 emission one step at a time.
Thanks to the replacement of traditional halogen lamp, one of 6W MR16 lighting application can help in reducing global warming by 245.9 kg of CO2 annually.
Power Reduction by 88%
50W Halogen lamp 120
240 360 480 600 KWh
Saving 17.6 Trees a year Reduction of CO2
emission by 245.9kg
= =
432
88%
6W MR16 DATASHEET www.edison-opto.com
√
√
√
√
Product Safety
WARNING
Risk of Electrical Shock, Injury, and damage
Disconnect or turn off power before servicing or installing luminaire.
Do not hot swap! LED heat sink module must not to be disconnected with line power on failure to do so may damage product.
All wiring connections should be capped with UL approved recognized wire connectors.
The luminaire shall, under no circumstance, be covered with thermal insula- tion matting or similar material, and pay attention not to exceed the maxi- mum operation temperature of LED module.
If the IP rating of the fixture should be higher than IP20, the design of the housing should be according to the IP standards in the application.
The LED module itself and all its components must not be mechanically stressed.
Assembly must not damage or destroy conducting paths on the circuit board.
Be aware of, the luminaire is intended for indoor application and keep away from any chemicals.
CAUTION
Avoid direct eye exposure to the light source while it is on.
Wear safety glasses and gloves during installation and servicing.
Allow lamp/fixture to cool before handling. Do NOT touch enclosure or light source.
Follow all manufacturers’ warnings, recommendations and restrictions for : burning position, mounting location/methods, and replacement.
√
√
√
√
√
√
√
√
Versions Description Release Date
6W MR16 DATASHEET www.edison-opto.com
Package Information
Revision History
1pc / Pack 10 Packs / Box
Notes :
1. Pack Dimensions : 60mm(length)*55mm(width)*65mm(height) 2. Box Dimensions : 330mm(length)*120mm(width)*70mm(height) 3. Carton Dimensions : 368mm(length)*248mm(width)*350mm(height) 4. Figures not shown to scale.
10 Boxes / Carton
Edison Opto is a leading manufacturer of high power LED and a solution provider experienced in LDMS. LDMS is an integrated program derived from the four essential technologies in LED lighting applications- Thermal Management, Electrical Scheme, Mechanical Refinement, Optical Optimiza- tion, to provide customer with various LED components and modules. More Information about the company and our products can be found at www.edison-opto.com.
6W MR16 DATASHEET www.edison-opto.com
About Edison Opto
Copyright©2014 Edison Opto. All rights reserved. No part of publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photo copy, recording or any other information storage and retrieval system, without prior permission in writing from the publisher. The information in this publication are subject to change without notice.
For general assistance please contact:
[email protected] For technical assistance please contact:
