2012 / storage systems technical manual

(1)

storage systems technical manual

2012 / 2013

(2)

(3)

(4)

(5)

Technical features

Wardrobe modular system consisting of front panels made of honeycomb panels. The wardrobes can be fi tted with internal accessories, LED lamps, elements for bridge compositions, specifi c tall units for corner compositions and terminal tall units with depth change. St Germain can be proposed in 4 different versions: 1. wardrobe with hinged doors

2. wardrobe with sliding doors 3. wardrobe with coplanar sliding doors 4. walk-in closet

WARDROBE Dimensions -

- Hinged door > h. 2322, 2610, 2898 mm / module W. 425, 575, 875, 1175 mm / Total depth: 600 mm. - Sliding door > h. 2322, 2610 mm / module W. 875, 1175, 1775 mm / Total depth: 605, 642 mm.

- Coplanar sliding door > h. 2322, 2610 mm / module W. 875, 1175 mm (only pre-confi gured compositions) Total depth: 605 mm.

Structure: completely made of wood particle boards with very low formaldehyde emission, class E1, 25 mm. thick with external fi nish in melamine.

Shelves: 35 mm. thick. Distance of shelves drilling holes on side panels: 96 mm.

Terminal side panels: fi nished on external visible side and frontal edge (please note that the fi nished side panels are lacquered in polished white when used with doors in white Policoat). Plinth and upper fi xed front profi le in black colour.

The sliding mechanism of sliding and coplanar sliding doors is covered, in the upper part, with black metal. Finish: white melamine - thermo-treated larch-wood melamine.

Front panels: the matt lacquered, wood and polyester fi nishes are made of 25 mm. honeycomb board panels with structure in solid wood + honeycomb. Policoat fi nish made of wood particle boards with very low formaldehyde emission, plated with polished metachrylate plate (Policoat): the total door thickness is 22 mm. Hinges have three settings and a device for a controller closure.

Finishes: 1) Policoat - 2) Matt lacquer - 3) Wood - 4) Polyester.

Accessories - DRAWER UNITS: structure made of 12 mm. black wood particle panels; front panels made of 18 mm. wood particle panels, treated with high quality resin. Carcass made of melamine-coated wood particle boards with very low formaldehyde emission, class E1, 35 mm. thick. Edges in ABS in same colour. Totally extractable drawer glides with integrated soft closure device. Handle, positioned on whole frontal width, is made of extruded aluminium profi le, varnished in matt black.

TROUSER-HOLDERS: Frame in wood, white matt lacquered (for wardrobe structures in white melamine) or black matt lacquered (for wardrobe structures in melamine thermo-treated larch-wood).

Rods in black PVC, covered with anti-slip transparent varnish. Totally extractable glides with integrated soft closure device. CLOTHES RODS: in black anodised aluminium, moulded supports in matt black nylon.

PULL-OUT SHELVES FOR SHIRTS AND TRAYS: frame in wood, matt white lacquered (with structures in white melamine) or matt black (with structures in thermo-treated larch melamine-coated wood), with 35 mm. thick shelf in melamine-coated fi nish and sides in black metal. Totally extractable glides with integrated soft closure device.

PULL-DOWN HANGING RAIL: in metal, matt black varnished, with matt black plastic elements.

Finish: white melamine - thermo-treated larch-wood melamine (black for internal part of drawers and different details)

Lighting - LED lamps, 2,88 W, W. 242 mm, white frame, voltage 24 V. They are supplied with presence sensor with relative automatic switch. Light colour temperature: 3200 Kelvin.

WALK-IN CLOSET

Dimensions - H.: 2322, 2610, 2898 mm / module W.: 541, 841 mm / Total depth: 530 mm.

Structure - UPRIGHTS: in aluminium profi le, matt black varnished, with rack (32 mm. distance) for accessories fastening. BACK PANELS: made of 18 mm. wood particle panels, melamine or matt lacquered fi nishes.

SHELVES: made of 35 mm. honeycomb board. The shelves have sides in matt black metal (h. side: 60 mm, upper extended part: 25 mm). BASEMENTS: made of wood particle panels, with low formaldehyde content. The basement is fi tted with adjustable feet and plinth in aluminium, varnished in matt black.

Finishes: white melamine - thermo-treated larch-wood melamine - matt lacquered with elements in metal/matt black aluminium.

Accessories - DRAWER UNITS: structure made of 12 mm. black wood particle panels; front panels made of 18 mm. wood particle panels In melamine or matt lacquered. Upper panel made of melamine-coated wood particle boards with very low formaldehyde emission, class E1, 35 mm. thick. Totally extractable drawer glides with integrated soft closure device. Handle, positioned on whole frontal width, is made of extruded aluminium profi le, varnished in matt black. Version with wheels: 4 castors (2 with brake), drawer back panel in same fi nish as carcass. TROUSER-HOLDERS: Frame in wood, white matt lacquered (for wardrobe structures in white melamine) or black matt lacquered (for wardrobe structures in melamine thermo-treated larch-wood).

Rods in black PVC, covered with anti-slip transparent varnish. Totally extractable glides with integrated soft closure device. CLOTHES RODS: in black anodised aluminium, printed supports in matt black nylon.

Finishes: white melamine - thermo-treated larch-wood melamine - matt lacquered (matt black for internal part of drawers and other details).

Lighting - LED lamps, 2,88 W, W. 242 mm, white frame, voltage 24 V. They are supplied with presence sensor with relative automatic switch. Light colour temperature: 3200 Kelvin.

(6)

Photo details

Wardrobe with sliding doors

Wardrobe with hinged doors Drawer unit for wardrobe

Trouser-holder for wardrobe

Walk-in closet Shirts tray for wardrobe

Pull-down hanging rail for wardrobe

Shelf for walk-in closet

(7)

Technical details

S T G E R M A I N

Melamine structure

Finished terminal side panel,

25 mm. thick

Melamine structure

Middle side panel in melamine,

25 mm. thick

Finished hinged / sliding /

coplanar sliding door,

22 / 25 mm. thickness

(8)

S T G E R M A I N

INTERNAL STRUCTURE - (Melamine)

POLYESTER - (polished lacquered in polyester) 003 White 106 Sahara 004 Grey 027 Black 129 Magnolia 006 Light grey RAL 9002 063 Sand 126 White

POLICOAT - (Polished methacrylate) 003 White MATT LACQUERED 003 White 119 Grey (Lamicolor® 1366) 129 Magnolia 134 Graphite grey (Lamicolor® 1397) 009 Cream 110 Orange 120 Moka (Lamicolor® 1596) 106 Sahara 018 Clay 010 Red 137 Iron 022 Green apple 013 Night-blue 011 Green-Brown

WOOD - (veneered wood) 

028 White larch-wood 030 Grey larch-wood 031 Black larch-wood 029 Light grey larch-wood

Colours and wood species (for exact colours please see physical samples)

The different materials and the different fi nishes in same colour (i.e. white), when matched together, may have inevitable differences in shade. This feature shall not be subject to claims.

610

thermo-treated larch-wood

(9)

Drilling holes diagram for shelves and accessories 297 297 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 2322 2025 1929 1833 1737 1641 1545 1449 1353 1257 1161 1065 969 873 777 681 585 489 393 297 0 297 297 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 2610 2025 1929 1833 2313 2217 2121 1737 1641 1545 1449 1353 1257 1161 1065 969 873 777 681 585 489 393 297 0 297 297 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 2898 2025 1929 1833 2313 2217 2121 96 96 96 2601 2505 2409 1737 1641 1545 1449 1353 1257 1161 1065 969 873 777 681 585 489 393 297 0

Detail of shelf position by

drilling hole

35

25

10

50

78

50

96

32

64

128

96

Detail of the special drilling

hole for double shirt tray cod.

AGKR001 / AGKR002 / AGKR003

S T G E R M A I N

NOTE TO DESIGNER

(10)

S T G E R M A I N

NOTE TO DESIGNER

Wardrobes with HINGED, SLIDING, COPLANAR SLIDING DOORS

Examples of correct positioning of shelves and internal accessories

925 1051 1066 1117 1501 1309 2322 1339 1066 1339 1066 373 1339 1066 1066 373 349 283 253 2610 2610 2898 2898 925

Min. recommended

height of

compart-ment for jackets

Min. recommended

height of compartment

for shirts

Min. recommended

height of compartment

for long coat

Min. recommended

height of

compart-ment for long clothes

(11)

S T G E R M A I N

HINGED DOORS

MATERIAL POSITIONING SERIES AND DIMENSIONS

Handles - Typologies and positioning

For tall units with double doors, handles only on right door

Handle with price increase.

Recessed into the door thickness.

Please note: NOT available in Policoat and Wood fi nishes.

Please note: Duemilaotto in polyester fi nish.

It’s available ONLY in white, cod. 003. The handle is made of a part in solid Corian® joined in the door body, then cut out. Con-sequently the handle itself remains, as a matter of fact, in white Corian® fi nish, different from the main fi nish on the door itself.

Price increase

L= 364 mm. Matt lacquered -

Polyester (only white, cod. 003) JZMS01

Handle with price increase.

Handle in aluminium extruded profi le.

It’s mounted aligned with door edge, thanks to a special cut-out. Finishes: brushed anodised stainless steel, matt white or matt black varnished.

Price increase

L= 360 mm

Policoat - Matt lacquered -

Wood - Polyester JZMS01 / 25 25 1000 1000 DUEMILAOTTO APRILE 23 27 50 17 3 360 360 27 23 50

Handle with price increase.

Please note: NOT available in Policoat Price increase L= 360 mm. Matt lacquered - Wood - Polyester JZMS01 360 23 30 25 1000 X36

(12)

23 21 220 30

S T G E R M A I N

HINGED DOORS

For tall units with double doors, handles only on right door

Pocket-handle in printed varnished zama. Finishes: aluminium varnished - white - black.

1000 WK6

Handle bar in extruded aluminium. Finish: naturally anodised. L= 370 mm - 520 mm.

Vertical: ONLY L. 520 mm.

Horizontal: the width is a little smaller than the door width (ex. door width: 597 mm > handle width: 520 mm).

Handle with angled section, in extruded varnished aluminium Finishes: matt white - matt black.

L= 370 mm - 520 mm.

Horizontal: the width is a little smaller than the door width (ex. door width: 597 mm > handle width: 520 mm).

1000 1000 TRAVE WK6 APRILE 2 Horizontal version too Horizontal version too

(13)

2322 85 1051 35 1066 85 600 2610 85 1339 35 1066 85 600 2898 85 1627 35 1066 85 600 25 425 25 575 25 875 25 1175 25 25 1038 1038 25 373 25 25 373 352 600

S T G E R M A I N

HINGED DOORS

Technical diagrams

Sections

Plans

- The fi xed structural shelf could be moved during the assembly thanks to additional sleeves supplied with. The sleeves not used and mounted in standard position are, in this case, visible. Upon request the structural shelf could be provided in a position different from the standard one.

- When vertical dividers are used the position of the structural shelf depends on the divider height itself and has the function of upper covering for the dividers themselves.

(14)

WARDROBE COMPOSITION DIMENSIONS

X = wardrobe width

Y = wardrobe height

Z = wardrobe depth = 600 mm

MINIMUM DIMENSIONS OF THE NICHE

X1 = X + 80 mm = min. niche width

(with vertical ironware for niche use AGAB001, X1 = X + 20 mm).

Y1 for wardrobe compositions with hinged door = Y + 20 mm = min. niche height

Z1 = 600 mm = niche depth X Z Y < X1 Y1 Z1 <

S T G E R M A I N

HINGED DOORS

(15)

425 575 875 425 425 425 575 1175 575 575 425 875 575 875 425 1175 575 1175 875 875 425 875 575 875 1175 425 1175 575 875 425 875 1175 1175 875 575 875 875 425 1175 875 575 1175 875 875 875 1175 425 1175 425 875 875 575 875 1175 875 1175 575 1175 425 875 875 875 1175 425 575 875 1175 875 1175 575 875 875 875 425 1175 1175 575 425 1175 875 875 1175 1175 1175 875 875 875 875 875 575 1175 875 1175 425 875 1175 425 875 875 875 575 1175 575 875 1175 875 875 875 1175 1175 1175 1175 425 425 875 875 875 875 1175 875 875 1175 1175 875 425 575 1175 1175 1175 875 1175 875 875 875 875 875 1175 1175 1175 1175 475 625 925 925 1075 1225 1225 1375 1525 1675 1825 1825 1975 2125 2275 2275 2425 2425 2575 2725 2725 2875 2875 3025 3025 3175 3175 3325 3325 3475 3475 3625 3625 3625 3775 3775 3925 3925 4075 4075 4225 4375 4525 4525 4525

S T G E R M A I N

HINGED DOORS – Modularity

(16)

S T G E R M A I N

SLIDING DOORS

For door sliding to right side, handle on left - for sliding to left side, handle on right

Handle with price increase.

Please note: NOT available in Policoat and Wood fi nishes.

It’s available ONLY in white, cod. 003. The handle is made of a part in solid Corian® joined in the door body, then cut out. Con-sequently the handle itself remains, as a matter of fact, in white Corian® fi nish, different from the main fi nish on the door itself.

Price increase

L= 364 mm. Matt lacquered -

Polyester (only white, cod. 003) JZMS01

It’s mounted aligned with door edge, thanks to a special cut-out. Finishes: brushed anodised stainless steel, matt white or matt black varnished.

Price increase

L= 360 mm

Policoat - Matt lacquered -

Wood - Polyester JZMS01 / 25 25 1000 1000 DUEMILAOTTO APRILE 23 27 50 17 3 360 360 27 23 50

Handle with price increase.

Please note: NOT available in Policoat Price increase L= 360 mm. Matt lacquered - Wood - Polyester JZMS01 360 23 30 25 1000 X36

(17)

23 21 220 30

S T G E R M A I N

SLIDING DOORS

For door sliding to right side, handle on left - for sliding to left side, handle on right

1000 WK6

Handle bar in extruded aluminium. Finish: naturally anodised. L= 520 mm

PLEASE NOTE! It can be used ONLY in compositions fi tted with shelves or clothes rods. Any internal drawer units can be used ONLY when they are less wide than the useful compartment.

L= 520 mm.

PLEASE NOTE! It can be used ONLY in compositions fi tted with shelves or clothes rods. Any internal drawer units can be used ONLY when they are less wide than the useful compartment.

TRAVE WK6 APRILE 2

(18)

S T G E R M A I N

SLIDING DOORS

Technical details 605 25 875 25 875 25 1175 25 1175 25 25 1775 25 642 2322 85 1051 35 1066 85 605 / 642 2610 85 1339 35 1066 85 605 / 642

Sections

Plants

- When vertical dividers are used the position of the structural shelf depends on the divider height itself and has the function of upper covering for the dividers themselves.

(19)

WARDROBE COMPOSITION DIMENSIONS

X = wardrobe composition width

Y = wardrobe composition height

Z = wardrobe composition depth = 642 mm

Y1 for wardrobe compositions with sliding door = Y + 80 mm = min. niche height

Z1 = 642 mm = niche depth X Z Y < X1 Y1 Z1 <

S T G E R M A I N

SLIDING DOORS

(20)

875 1825 875 1175 2425 1175 875 2725 875 875 1175 3625 1175 1175 875 3625 875 1775 4225 1775 1175 1175 875 1825 875 875 2725 875 875 4550 1175 2425 1175 1175 3625 1175 1175 6050

S T G E R M A I N

SLIDING DOORS - Modularity

(21)

S T G E R M A I N

COPLANAR SLIDING DOORS

For door sliding to right side, handle on right - for sliding to left side, handle on left

Handle with price increase.

Please note: NOT available in Policoat. Price increase L= 360 mm. Matt lacquered - Wood - Polyester JZMS01 360 23 30 25 1000 X36 MATERIAL POSITIONING SERIES AND DIMENSIONS 1000 1000 TRAVE WK6 APRILE 2

L=: 520 mm - 820 mm - 1120 mm.

Horizontal: the width is quite smaller than the door width (ex. door width: 915 mm > handle width: 820 mm).

Handle bar in extruded aluminium. Finish: naturally anodised. L= 520 mm - 820 mm - 1120 mm.

Horizontal: the width is quite smaller than the door width (ex. door width: 915 mm > handle width: 820 mm).

(22)

S T G E R M A I N

COPLANAR SLIDING DOORS

Technical details

Sections

Plants

- When vertical dividers are used the position of the structural shelf depends on the divider height itself and has the function of upper covering for the dividers themselves. 875 875 875 1175 1175 1175 25 25 25 25 25 25 25 25 25 25 25 1175 1175 605 605 2322 85 1051 35 1066 85 605 2610 85 1339 35 1066 85 2654 2610 44 2366 2322 44 605 25 1175 25 1175 25

= overall

dimen-sions of sliding

mechanism

(23)

WARDROBE COMPOSITION DIMENSIONS

X = wardrobe composition width

Y = wardrobe composition height

Z = wardrobe composition depth = 605 mm

Y1 for wardrobe compositions with coplanar sliding door = Y + 80 mm = min. niche height Z1 = 605 mm. = niche depth X Z Y < X1 Y1 Z1 <

S T G E R M A I N

COPLANAR SLIDING DOORS

(24)

S T G E R M A I N

COPLANAR SLIDING DOORS - Modularity

Examples of wardrobe compositions - 25 mm. thick side panels included

1175 2425 1175 1825 875 2725 875 875 1175 3625 1175 1175 875 2725 875 875 5450 1175 2425 1175 1175 3625 1175 1175 6050 875 2725 875 875

*

3650

*

875 2725 875 875

*

1175 2425 1175 4850 1175 2425 1175 875 875 1825 875 875 1825 875 875 5475 1825 875 875 1825 875 875 1825 875 875 4550 1825 875 875

(25)

2898 2610 2322 541 / 841 541 / 841 541 / 841 541 / 841 518 518 541 / 841 541 / 841 541 / 841 4 10 18 4 4 4 541 / 841 541 / 841 541 / 841 541 / 841 518 518 541 / 841 10 4 18 4 518 541 / 841 10 4 4 4 541 / 841 15 530 530 530 4 10 18 10 10 18 18

NOMINAL SIZES

ROUNDED UP TO

mm.

S T G E R M A I N

WALK-IN CLOSET

Technical details

Side elevations

Plants

(26)

WALK-IN CLOSET COMPOSITION DIMENSIONS

A = width 1 of walk-in closet composition

B = width 2 of walk-in closet composition

Z = walk-in closet depth = 530 mm.

MINIMUM DIMENSIONS OF THE NICHE

X1 = A + 10 mm. = min. niche width

X2 = B + 10 mm. = min. niche width

Y1 = Y + 10 mm. = min. niche height

Z1 = 530 mm. = min. niche depth

S T G E R M A I N

WALK-IN CLOSET

Minimum dimensions of the space where the niche wardrobe is fi tted

B

Z

< <

A

X1

X2

Z1

(27)

(28)

(29)

Technical features

Modular wardrobe system, with high technology hidden within the system itself. Main and innovative feature is the absence of internal vertical structural elements: it’s free from any space limitation as middle panels of traditional wardrobes.

Solferino can be used in wall version, is a very fl exible and absolutely adaptable system.

This wardrobe has an hidden structure in metal and aluminium, melamine internal panels and front panels in honeycomb board wood.

Optionally you can have:

- side panels or fi llers in honeycomb board wood - upper covering panel in fi nish

- internal drawer units in melamine and aluminium - shelves in melamine

- pull-out trouser-holders in melamine and aluminium - clothes rods in aluminium.

Any possible composition of modules with different heights should be ordered as combinations of single compositions: each composition with same height has always 2 terminal modules, the right and the left one.

Each wardrobe module can be proposed in following version: without lighting, with upper LED lighting, with upper and lower LED lighting.

- Available heights: 1586, 1936, 2286, 2636 mm (+ 14 mm when the optional upper covering panel is used).

- terminal module widths: 468, 543*, 618, 693*, 918, 1218 mm - *The 543 (= 525+18 mm) and 693 mm (= 675+18 mm) termi-nal modules can offer very fl exible and custom composition widths. Please note that, in purely aesthetic terms, the front panels of these modules (543 or 693 mm) are wider than the standard ones (450 or 600 mm) and that the internal fi ttings for these consist of accessories for 450-600 or multiple modules: so the distance between the accessory and the side panel is 75 mm. (see page 2.5).

- middle module widths: 450, 600, 900, 1200 mm. - total depth: 670 mm.

Supporting metal structure - Made of metal varnished in matt black. Vertical racks, with cut outs each 35 mm., for hanging and fi xing of internal accessories.

Connection bars - Made of black anodised extruded aluminium profi le. They are used as structural element for modules assembly, door hinges fi tting seat and seat for fi xing any LED lamps included in single module.

Internal back panels - Made of 18 mm. wood particle panels, very low formaldehyde content (European Regulation Class EPF-S compliant), treated with high quality resin. Edges in ABS, in same colour.

Finishes: 1) white - 2) thermo-treated larch-wood.

Accessories - DRAWER UNITS: Made of 16 and 10 mm. wood particle panels, very low formaldehyde content (European Regulation Class EPF-S compliant), treated with high quality resin. Edges in ABS, in same colour. Front panels in aluminium, matt black varnished, equipped with handle. Drawer glides are totally extractable, with integrated soft closure device. TROUSER-HOLDERS: structure made of 16 and 10 mm. wood particle panels, very low formaldehyde content (European Regu-lation Class EPF-S compliant), treated with high quality resin. Edges in ABS, in same colour. Runners are totally extractable, with integrated soft closure device. Bars for trouser in black anodised aluminium.

CLOTHES RODS: in black anodised aluminium. SHELVES: Made of 10 mm. wood particle black panels, very low formaldehyde content (European Regulation Class EPF-S compliant), treated with high quality resin. Edges in ABS, in same colour.

Finish: black.

Front and side panels - In honeycomb board wood, 25/26 mm. thick: structure in solid wood + honeycomb. The doors have an inside adjustable anti-warping rod and exclusive black galvanized hinges, with 3 settings. the hinges are fi xed on aluminium upper and lower connection bars. 98° opening.

Finishes: 1) Silcover - 2) Mat Plus - 3) Wood - 4) Wood Selection - 5) Polyester.

Hinges - The front doors have exclusive black galvanized hinges, with 3 settings and soft closure device. They are fi xed on aluminium upper and lower connection bars. 98° opening.

Upper covering panel - Made of 14 mm. MDF wood particle panels. When it is used please consider that the wardrobe is 14 mm. higher.

Finishes: 1) Silcover - 2) Mat Plus - 3) Wood - 4) Wood Selection - 5) Polyester.

Lighting - The modules with lighting are equipped with LED bars, low voltage (12 V), wide as the same module. These bars are to be fi xed on the specifi c housing on connection bars (lower or upper) of modules. They are supplied with transformer (100÷240 V / 50÷60 Hz) and presence sensor, with relative automatic switch.

Light colour temperature: 3200 Kelvin.

(30)

Photo details

(31)

Technical details

S O L F E R I N O

Upper covering panel in fi nish,

14 mm. thick

(Optional)

18 mm. melamine upper internal

panel

18 mm. melamine side internal

panel

26 mm. fi nished side panel

(Optional)

The fi llers in fi nish can be used

alternatively.

Metal structure,

matt black varnished

Module connection upper bar

in black anodised aluminium

LED upper lighting

(Optional)

Vertical rack for hanging and

fi xing of accessories

(distance 35 mm)

Kit of 18 mm. melamine

back panel

18 mm. melamine lower internal

panel

lower LED lighting

(Optional)

Module connection lower bar

in black anodised aluminium

Finished hinged door,

25 mm. thick

(32)

S O L F E R I N O

MATERIAL STANDARD POSITIONING SERIES AND DIMENSIONS

Handles - Typologies and standard positioning.

Handle with price increase.

It’s available ONLY in white, cod. 003. The handle is made of a part in solid Corian® joined in the door body, then cut out. Consequently the handle itself remains, as a matter of fact, in white Corian® fi nish, different from the main fi nish on the door itself.

Price increase

L= 180 mm. - 364 mm. Silcover Mat Plus

-Wood (only graphite-grey oak, tobacco painted walnut, ebony ecowood, black ecowood)

Wood Selection (acacia)

-Polyester (only white, cod. 003) JZMS01

Handle with price increase.

It’s mounted aligned with door edge, thanks to a special cut out. Finishes: brushed anodised stainless steel, matt white or matt black varnished.

Please note: don’t use opposing handles on tall units with double door, to avoid any type of interference between handles. In these cases the tall unit is supplied with only one handle on right door. Price increase L= 360 mm L = 180 / 364 25 25 1000 1000 DUEMILAOTTO APRILE 23 27 50 17 3 360 360 27 23 50

Price increase

L= 120 mm (X12) - 360 mm (X36) Silcover - Mat Plus -

Wood - Wood Selection -

Polyester JZMS01 120 - 360 23 30 25 1000 X12 - X36

(33)

23 21 220 30

S O L F E R I N O

MATERIAL STANDARD POSITIONING SERIES AND DIMENSIONS

Handles - Typologies and standard positioning.

Please note: don’t use opposing handles on tall units with double door, to avoid any type of interference between handles. In these cases the tall unit is supplied with only one handle on right door. 1000 WK6 370 / 520 224 / 381 == 8 25 370 / 520 17 32 224 / 381 ==

Handle bar in extruded aluminium. Finish: naturally anodised. L= 370 mm - 520 mm.

L= 370 mm - 520 mm. 1000 1000 TRAVE WK6 APRILE 2 Horizontal version too Horizontal version too

(34)

S O L F E R I N O

POLYESTER - (Polished lacquer, polyester) 003 White 106 Sahara 004 Grey 027 Black 129 Magnolia 006 Light grey RAL 9002 063 Sand MAT PLUS (M+) - ("Soft touch" matt lacquered)

129 Magnolia 009 Cream 137 Iron 010 Red 138 Slate 003 White 005 Grey Ral 7038 011 Green-Brown RAL 7013 018 Clay 110 Orange 013 Night-blue 012 Chocolate brown 109 Yellow 003 White 130 White 133 White (Lamicolor® 754) 610 thermo-treated larch-wood 134 Graphite grey (Lamicolor® 1397) 131 Sand (Lamicolor® 1041) 011 Green-Brown RAL 7013 SILCOVER - (matt lacquered, fi ne textured)

INTERNAL PANELS - (Melamine)

119 Grey (Lamicolor® 1366) 118 Black (Lamicolor® 202) 120 Moka (Lamicolor® 1596) 323 Blue 321 Mustard 320 Orange 324 Green apple 322 Red 325 Brick 009 Cream 129 Magnolia

WOOD - (Veneer wood - Eco-wood reconstructed veneer wood) 049

Oak

099

Ebony eco-wood 076

Graphite grey oak 071 Dark oak 100 Black eco-wood 028 White larch-wood  096 “Rigatino” walnut eco-wood 030 Grey larch-wood  046 Tobacco painted walnut 031 Black larch-wood  045 Larch  029 Light grey larch-wood 

WOOD SELECTION - (Veneer wood) 052

Acacia wood thermo-treated (brushed)

(35)

670 670 670 670 670 670 670 670 2636 2286 1936 1586 2636 2286 1936 1586 14 14 14 14 2650 2300 1950 1600 26 468 450 18 600 18 900 18 1200 18 450 18 75 600 18 75 450 18 600 18 900 18 1200 18 450 18 75 600 18 75 468 543 543 618 618 693 693 918 918 26 1218 1218 450 450 900 1200 450 525 600 600 600

S O L F E R I N O

Technical diagrams

Sections

Without upper covering panel

With upper covering panel

Plans

Te

rminal modules

Plans

Middle modules

Plans

Back panels

Or

der example

(36)

WARDROBE COMPOSITION DIMENSIONS

X = wardrobe width

Y = wardrobe height (PLEASE NOTE: wardrobe is 14 mm. higher when the fi nished up-per covering panel, cod. SQAYAT01, is used - see example B).

Z = wardrobe depth = 670 mm

MINIMUM DIMENSIONS OF THE NICHE

Y1 for wardrobe compositions without covering panel (example A) = Y + 20 mm = min. niche height

Y1 for wardrobe compositions with 14 mm. covering panel, cod. SQAYAT01 (example B) = Y + 60 mm = min. niche height

Z1 = 670 mm = niche depth - When niches are less deeper please use fi nished side panels or fi llers, wide as the composition.

Y2 = min. 200 mm = min. height to allow possible adjustments of door anti-warping ties. If not realised the doors have to be taken down for adjustments.

X Z = 670 Y 1586 / 1936 / 2286 / 2636 20 Y1 Y2 Y2 Y Y1 X1 Y1 Z1 = 670 Y2 Y2 Y 1586 / 1936 / 2286 / 2636 14 60

S O L F E R I N O

EXAMPLE A without covering panel

EXAMPLE B with covering panel, cod. SQAYAT01 Minimum dimensions of the space where the niche wardrobe is fi tted

(37)

468 (450) 543 (525) 543 (525) 618 (600) 618 (600) 468 (450) 468 (450) 450 1386 450 1536 900 918 (900) 918 (900) 1836 918 (900) 918 (900) 2286 543 (525) 450 1461 600 600 1836 618 (600) 600 1911 693 (675) 450

*

468 (450) 543 (525) 1911

*

900 543 (525) 1986

*

693 (675)

*

693 (675) 600 1986 693 (675)

*

693 (675)

*

693 (675)

*

543 (525)

*

543 (525)

*

543 (525)

*

900 543 (525) 2361

*

2436 918 (900) 1218 (1200) 1218 (1200) 2511 618 (600) 1200 693 (600)

*

2586 1200 ₍₆₀₀₎693

*

693 (675)

*

693 (675)

*

543 (525)

*

450 600 3636 1218 (1200) 1218 (1200) 543 (525)

*

900 900 3261 918 (900) 543 (525)

*

900 900 3336 543 (525)

*

543 (525)

*

450 1200 4236 1218 (1200) 1200 1200 3711 1218 (1200) 1200 900 900 3636 918 (900) 918 (900) 900 900 3711 918 (900) 450 693 (675)

*

543 (525)

*

3786 1200 1200 900 900 900 3786 693 (675)

*

900 900 900 4086 918 (900) 468 (450) 900 900 900 4161 918 (900) 543 (525)

*

618 (600) 4311 1218 (1200) 1200 1200 693 (675)

*

693 (675)

*

4386 1200 1200 600 900 900 900 4536 918 (900) 918 (900) 900 900 900 4611 918 (900) 543 (525)

*

900 900 900 900 4686 4836 1218 (1200) 1218 (1200) 1200 1200 5436 1218 (1200) 1200 1200 1200 4911 1218 (1200) 1200 1200 693 (675)

*

4986 1200 1200 1200 618 (600) 900 2736 918 (900) 918 (900) 900 543 (525) 2811

*

918 (900) 3036 1218 (1200) 1218 (1200) 693 (675)

*

450 900 900 543 (525) 2886

*

543 (525)

*

600 3111 1218 (1200) 1200 900 900 (450)468 3186 918 (900) 450 600 543 (525) 693 (675)

75

18

*

Accessori Accessories Accessoires Zubehör Accesorios

S O L F E R I N O

Modularity

Examples of wardrobe compositions

*

= the 525 (actual size: 543 mm) and 675 mm (actual size: 693 mm) wide modules can be fi tted with 450 and 600 mm. (or multiple) wide accessories. Any accessory fi tted in 525 or 675 mm. module has a distance of 75 mm. from the inner part of the side panel.

Example of accessories fi tted on

(38)

(39)

(40)

(41)

Technical features

The door (hinged and folding doors) and wall partition system is composed of bearing structures with ceiling-mounted telescopic rail, wall-mounted jambs and corner jointing element.

The doors and fi xed partition walls are available in 2 different versions:

Frame + glass: frame made of extruded profi les In anodised aluminium, brushed stainless steel fi nish with 6 mm. fl oat glass, coated with safety membrane.

Finished door: 55 mm. thick honeycomb board wood in following fi nishes 1) pre-treated rough door to be varnished , 2) Silcover, 3) Mat Plus, 4) Wood, 5) Polyester.

Rails, jambs and jointing elements in anodised aluminium extruded profi les, brushed stainless steel fi nish.

Supplied hardware: sliding carriages with silent bearings; rotating plates in 5 mm. brushed stainless steel profi le; fi xing and adjustment elements for fi xed partition walls in stainless steel and grey nylon.

Door handles in anodised aluminium profi le, brushed stainless steel fi nish.

(42)

A N T H E A

(43)

A N T H E A

Beginning element Middle element Terminal element Element for corner joining Typologies (doors or fi xed partition walls)

(44)

A N T H E A

POLYESTER - (Polished lacquer, polyester) 003 White 004 Grey 129 Magnolia MAT PLUS (M+) - (“Soft touch” matt lacquered)

129 Magnolia 009 Cream 137 Iron 010 Red 138 Slate 003 White 005 Grey Ral 7038 011 Green-Brown RAL 7013 018 Clay 110 Orange 013 Night-blue 012 Chocolate brown 109 Yellow 003 White 133 White (Lamicolor® 754) 134 Graphite grey (Lamicolor® 1397) 131 Sand (Lamicolor® 1041) 011 Green-Brown RAL 7013 SILCOVER - (matt lacquered, fi ne textured)

WOOD - (Veneer wood - Eco-wood reconstructed veneer wood)

076

Graphite grey oak

100 Black eco-wood 028 White larch-wood  030 Grey larch-wood  031 Black larch-wood  029 Light grey larch-wood 

GLASS - 6 mm. thick - (used always with aluminium frame, stainless steel fi nish) Transparent

(45)

Technical details

1 ceiling-mounted rail

2 telescopic rail

3 plug for telescopic rail

4 wall jamb

5 telescopic jamb for hinged door

6 jointing element for rail jamb

7 door rotation riser

8 rotation jointing element

9 covering element for folding door

10 brush strip for covering element

11 rotation arm for door

12 gasket 13 1° folding door 14 2° folding door 1 2 3 4 6 9 8 10 5 7 8 11 12 13 14 15 15 16 16 16 16 18 17 17 19 13 14 12 11 21 10 11 7 20 28 22 23 1 2 25 26 24 24 27 4 23 8

A N T H E A

15 handle

16 rail track for moving doors

17 block for moving doors

18 housing of block on telescopic rail

19 hinges of folding doors

20 jamb for jointing element on folding door

21 jointing element

22 jamb for jointing element on fi xed door

23 covering element for fi xed door

24 fi xed door

25 upper plate for fi xed door

26 fl oor-mounted plate for fi xed door

27 telescopic jamb on fi xed door

(46)

1 Wall-mounted jamb

2 Fixed partition wall / Door

3 width

4 ceiling-fi xed rail

5 Fixed partition wall / Door height

6 6 6 5 5 5 4 4 4 2 3 3 2 3 1 2 1 1 1 3 2 1 1 3 2 1 3 2 2 10 9 7 7 8 8 1 1 1 1 1 2 4

A N T H E A

Front elevations and sections

Fixed partition wall Hinged door

Folding door _{2-ways jointing element}

6 fl oor/ceiling distance

7 jamb for jointing element

8 jointing element

9 height of jamb for jointing element

(47)

Sections min 92 max 107 min 300 max 1200 min 300 max 1200 min 300 max 1200 min 92 max 107 min 800 max 1200 min 92 max 107 400 V1 max 320 L1 L1 min 92 max 107 min 92 max 107 min 800 max 1200 min 800 max 1200 max 320 S1 N1

Fixed partition wall

Hinged door Folding door

A N T H E A

S1 jamb N1 jointing element L1 width V1 changeable dimension

(48)

7,5 7,5 100 7,5 7,5 40 min 92,5 34 65 34 65 max 107,5 max 47,5 min 32,5

A N T H E A

Examples of wall-mounted solutions - Fixed jamb with telescopic jamb and covering element (for both) H. max 3000 mm. (single piece) - Adjustment: + / - 7,5 mm.

(49)

Door jamb

Wall-mounted pivot pin for door

Wall-mounted, built-in reduced profi le

Wall-mounted solution, without jamb for fi xed door Built-in jamb for door

Wall-mounted, built-in pivot pin

Wall-mounted fi xed door

Wall-mounted reduced profi le

A N T H E A

(50)

2 2 70 56 2 65 56 2 2 2 5 56

A N T H E A

Technical details of jointing elements

(51)

65

70

5

11

34

11

34

min 2000 / max 3000

A N T H E A

Technical details

(52)

A N T H E A

Adjustments 5 20 7,5 7,5 7,5 7,5 3 3 20 20 6 1 Jamb adjustment

(53)

Design criteria To install:

- measure the ceiling height at all points, considering the smallest taken measure (Y1, Y2, Y3, Y4, Y5, Y6, Y7, Y8, Y9). - measure the unit width at all points, considering the smallest taken measure (X1, X2, X3, X4).

- ensure that ceiling can carry weight of sliding door (max. 60 kg. each).

The ceiling and false ceiling have to be levelled for accurate installation and functioning of sliding doors. The fi xed partition walls are self-bearing and height-adjustable, supporting the line on fl oor and ceiling. Walls with frame + glass: H. min. 2000, max. 3000 - W. min. 300, max. 1200 mm.

Walls with fi nished door: H. min. 2000, max. 3000 - W. min. 300, max. 1200 mm. Hinged doors with frame + glass: H. min. 2000, max. 3000 - W. min. 800, max. 1200 mm. Finished hinged doors: H. min. 2000, max. 3000 - W. min. 800, max. 1200 mm. Folding doors with frame + glass: H. min. 2000, max. 3000 - W. min. 1600, max. 2400 mm. Finished folding doors: H. min. 2000, max. 3000 - W. min. 1600, max. 2400 mm.

A N T H E A

< < < < < < < < ; ; ; ; <

(54)

Taking dimensions

Y

Measure always the minimal height (Y) and width (X) of rooms

Y

X

Y

X

Y

A N T H E A

Ceiling height Ceiling height, when built-in rail is used

(55)

(56)

(57)

Technical features

The boiserie system consists of a bearing structure with wall-fi xed uprights and panels in different fi nishes, applied on the same uprights. The system is fi tted with accessories, hanged with brackets.

Structural uprights - Made of extruded aluminium profi les, naturally anodised fi nish. Height-and depth-adjustable thanks to feet and elements to compensate possible wall unevenness. Black dust protection brush.

Covering panels and terminal fi llers - Made of wood particle panels, 19 or 20 mm. thick, with low formaldehyde content E1 class, available in: Silcover, Mat Plus, Wood and polyester.

Supplied hardware - Feet and depth-adjustable elements in anti-oxidation treated moulded zamak. Brackets for carcasses and shelves made of sheet and tubular steel painted with black epoxy dusts.

Units - 3 available versions: 1) fi nished suspended units Wood with drawers or open-faced. Available with frontal panels in transparent glass. 2) Melamine suspended units with aluminium drawers. 3) melamine units arranged for installation on feet, castors or brackets. All drawers are fi tted with totally extractable glides and controlled closure device.

Accessories - BASEMENTS: Made of wood particle panels, 15 or 16 mm. thick, with low formaldehyde content E1 class, available in Wood. CLOTHES RODS: in extruded anodised aluminium profi le, natural or black fi nish. FEET or CASTORS: stainless steel feet or castors kit (for drawer units).

Shelves - available versions: 1) 60 mm. thick in fi nish: made of honeycomb board, Silcover, Mat Plus, Wood or polyester fi nish. 2) 60 mm. thick in fi nish with LED lamp: made of honeycomb board, Silcover, Mat Plus, Wood or polyester fi nish. 3) In anodised aluminium: 15 mm. thick extruded anodised aluminium profi les, natural fi nish. 4) In wood with sides: made of veneer wood particle panels, Wood fi nish. 5) 30 mm. thick in fi nish: made of wood particle panels with low formaldehyde content E1 class, Silcover, Mat Plus, Wood or polyester fi nish.

(58)

028 White larch-wood  030 Grey larch-wood  031 Black larch-wood  029 Light grey larch-wood 

B O I S E R I E

MAT PLUS (M+) - (“Soft touch” matt lacquered)

129 Magnolia 009 Cream 137 Iron 010 Red 138 Slate 003 White 005 Grey Ral 7038 011 Green-Brown RAL 7013 018 Clay 110 Orange 013 Night-blue 012 Chocolate brown 109 Yellow 003 White 133 White (Lamicolor® 754) 134 Graphite grey (Lamicolor® 1397) 131 Sand (Lamicolor® 1041) 011 Green-Brown RAL 7013 SILCOVER - (matt lacquered, fi ne textured)

WOOD - (Veneer wood - Eco-wood reconstructed veneer wood)

076

Graphite grey oak

100

Black eco-wood

(59)

B O I S E R I E

POLYESTER - (Polished lacquer, polyester) 003 White 106 Sahara 004 Grey 027 Black 129 Magnolia 006 Light grey RAL 9002 063 Sand

GLASS (with frame / aluminium frame)

Black-varnished Mirror

White-varnished

(60)

B O I S E R I E

Handles - Typologies and standard positioning

MATERIAL STANDARD POSITIONING SERIES AND DIMENSIONS

Handle bar in extruded aluminium. Finish: naturally anodised. L= 520 mm - 820 mm - 1120 mm.

The width is a little smaller than the drawer width (ex. drawer front width: 600 mm. > handle width: 520 mm.).

Handle with angled section, in extruded varnished aluminium.

Finishes: matt white - matt black. L=520 mm - 820 mm - 1120 mm.

The width is a little smaller than the drawer width (ex. drawer front width: 600 mm. > handle width: 520 mm.). TRAVE WK6 APRILE 2

(61)

B O I S E R I E

Technical details

44 / 64

8 600 / 900 / 1200

min 2000 / max 2500 min 2501/ max 2700

600 / 900 / 1200 600 / 900 / 1200 600 / 900 / 1200

min 205 / max 594 min 205 / max 594

min 2000 / max 2500 min 2501/ max 2700 min 2000 / max 2500 min 2501/ max 2700 min 2000 / max 2500 min 2501/ max 2700

min 2000 / max 2500 min 2501/ max 2700 min 2000 / max 2500 min 2501/ max 2700

600 / 900 / 1200 1500 1800 / 2100 / 2400 / 2700 / 3000 600 / 900 / 1200 / 1500 1800 / 2100 / 2400 / 2700 / 3000 600 / 900 / 1200 600 / 900 / 1200 600 / 900 / 1200 710 600 / 900 / 1200 900 / 1200 900 / 1200 600 / 900 / 1200 643 643 600 / 900 / 1200 600 / 900 / 1200 600 / 900 / 1200 600 / 900 / 1200 LED LED LED LED LED LED 710 Panels Terminal panels Shelves Accessories for shelves Wood units Basements Upright

(62)

How to use brackets and clothes rods with honeycomb board shelves

B O I S E R I E

599 519 40 40 899 819 40 40 1199 1119 40 40 1499 519 40 81 819 40 1799 519 40 81 519 81 519 40 1799 40 819 81 819 40 1799 40 819 81 1119 40 2099 40 819 81 1119 40 2399 519 40 81 519 81 519 81 519 40 2399 40 1119 81 1119 40 2699 2699 40 819 81 819 81 819 40 40 519 81 819 81 1119 40 2999 2999

(63)

B O I S E R I E

Composition examples A A A A C B B D D A _A B B

Linear wall composition with terminal fi ller (A)

Niche corner wall composition with: Terminal fi ller (A) internal corner fi ller (B) external corner fi ller (C)

Niche linear wall composition with variable terminal fi llers (D)

Niche corner wall composition with: terminal fi llers (A) Internal corner fi llers (B)

(64)

(65)

(66)

(67)

Technical details

Modular door system with fi xed and sliding elements equipped with supporting and sliding beam.

Doors

Available typologies: fi xed - sliding. Frame in black anodised aluminium profi le.

Surfaces in 6 mm thick tempered glass, available in 4 versions.

Upper sliding carriages (only on sliding doors, 1 pair each single door). Total load-bearing capacity: 240 kg per pair. Black anodised aluminium handle (height 250 mm, provided only on doors WITH HANDLES).

On sliding doors, guide pins to be fi xed on the fl oor are provided.

Kit for controlled movement of sliding doors (optional, to be ordered separately). Glass fi nishes:

1) Float transparent: 6 mm. thick, tempered.

2) Frosted extralight: 6 mm. thick, tempered, frosted on each side, without the typical green shades of the glass. 3) Smoky grey frosted: 6 mm thick, tempered, frosted on one side.

4) Transparent smoky grey: 6 mm. thick, tempered.

5) Frosted painted extralight: 6 mm thick, tempered, frosted on one side, without the typical green shades of the glass. 6) Special glass: Boffi can assess the possibility of offering glass types different from the ones listed. Please check before their feasibility.

Beams

Made of black anodised aluminium profi le; available in 5 different installation possibilities.

1) suspended installation> with 2-way rail. For lengths exceeding 3000 mm provide always a middle anti-warping rod, which must be fi xed to the ceiling (rod not provided)

2) wall installation> with 1-way rail.

3) ceiling installation> with 2-way rail. It can be installed with external ceiling fi xing or in proper built-in niche, made in the ceiling.

4) built-in installation for false ceiling > with 1-way or 2-way rail. 5) built-in wall installation for false ceiling > with 1-way or 2-way rail.

G R E E N E

Door system

(Design Piero Lissoni - 2012)

(68)

ALUMINIUM – (Anodised extruded aluminium profi le) – Door frame / beams

Black anodised

Smoky grey frosted

Frosted, dove-grey painted extralight

Frosted, coffee painted extralight

Frosted extralight

Glass – 6 mm thick, tempered - (used always with aluminium frame, in black anodised fi nish) – Door panelling

Transparent

G R E E N E

Door system

(D

esign Piero Lissoni - 2012)

Frosted, white painted extralight

Transparent smoky grey

(69)

Measurement taking

H1

Measure always the minimum height (H1) and width (L1) of rooms

H1 L1 H1 L1 H1 L1 H1 L1 Ceiling height Ceiling height when built-in beam is used

G R E E N E

Door system

(70)

Handle – Technical details

Handle - Positioning

Handle provided only on doors ordered WITH HANDLE. Finish: black satin anodised aluminium.

G R E E N E

Door system

(D

250 45 45 160 35 35 15 12 30° 15 1000

B

A

993 7 1000 A = Glass B = Door frame

(71)

G R E E N E

Door system

(D

TYPE 1 – 2-WAY SUSPENDED BEAM – Technical chart and calculation of heights

7 4 MIN. 200 mm H1 H3 H2 96 38 5 102 7 20 30

*

L

*

= For lengths exceeding 3000 mm it is necessary to support the beam through a middle anti-warping rod, anchored to the ceiling (code NVAVA02GR)

H1 = Ceiling height

H2 = Door frame height

H3 = Floor / beam height

SIZES CALCULATION H2 = H3 – 7

(72)

TYPE 2 – 1-WAY WALL BEAM – Technical chart and calculation of heights 5 4 51 38 6 ÷ 16 5 117 7 20 30 H3 H2 H1 ø 5 17 H1 = Ceiling height

G R E E N E

Door system

(D

SIZES CALCULATION H2 = H3 – 7

(73)

G R E E N E

Door system

(D

TYPE 3 – 2-WAY CEILING BEAM – Technical chart and calculation of heights

7 4 96 38 5 102 7 20 30 H1 H1 H3 H2 MIN. 100 mm MIN. 100 mm ø 6 ø 6 H1 = Ceiling height

SIZES CALCULATION H2 = H3 – 7

(74)

G R E E N E

Door system

(D

TYPE 4 – 1-WAY BUILT-IN BEAM FOR FALSE CEILING – Technical chart and calculation of heights

94 195 5 7 20 30 H1 H3 H2 43 48 7 4 38 H1 = Ceiling height

(75)

G R E E N E

Door system

(D

TYPE 5 – 2-WAY BUILT-IN BEAM FOR FALSE CEILING – Technical chart and calculation of heights

132 7 20 30 H1 H3 H2 195 5 7 86 82 38 4 H1 = Ceiling height

SIZES CALCULATION H2 = H3 – 12

(76)

G R E E N E

Door system

(D

TYPE 6 – 1-WAY BUILT-IN WALL BEAM FOR FALSE CEILING – Technical chart and calculation of heights

7 20 30 H1 H3 H2 7 77 38 166 60 5 226 8,5 11 4 ø 6 ø 6 ø 6 H1 = Ceiling height

(77)

TYPE 7 – 2-WAY BUILT-IN WALL BEAM FOR FALSE CEILING – Technical chart and calculation of heights

G R E E N E

Door system

(D

H1 H3 H2 7 117 7 20 30 11 38 166 60 5 226 ø 6 ø 6 ø 6 4

G R E E N E

Door system

(D

H1 = Ceiling height

(78)

G R E E N E

Door system

(D

Calculation of beam and door width

L3 50 28 28 50 L2 28 28 L1 L3 L4 50 L2 L1 L3 50 50 3 L2 L2 L1 L3 L4 50 50 L2 L2 L1 28 28 28 28 Closed doors Open doors Closed doors Open doors L1 = Beam width L2 = Door width

Compatible beams: TYPE 2 SIZES CALCULATION - 1 door L1 = L2 + L4 + 106

L2 = L3 + 100 L4 = L3 - 50

Compatible beams: TYPE 2 SIZES CALCULATION - 2 doors L1 = (L2 x 2) + L4 + 56 L1 = Beam width

L2 = Door width

L3 = Doorway width

(79)

G R E E N E

Door system

(D

L3 50 50 L2 L1 L3 L4 50 L2 L1 L3 50 50 3 L2 L2 L1 L3 L4 50 50 L2 L2 L1 Closed doors Open doors Closed doors Open doors L1 = Beam width L2 = Door width L3 = Doorway width

L4 = Clear doorway width

Compatible beams: TYPE 6 SIZES CALCULATION - 1 door L1 = L2 + L4 + 50

L2 = L3 + 100 L4 = L3 - 50

Compatible beams: TYPE 6 SIZES CALCULATION - 2 doors L1 = (L2 x 2) + L4 L2 = (L3 + 97) : 2 L4 = L3 - 100 L1 = Beam width L2 = Door width L3 = Doorway width

(80)

G R E E N E

Door system

(D

L3 50 50 L1 L4 L2 L2 L2 L2 14 14 L3 50 50 L1 L2 32 32 L3 50 50 L1 L4 L2 L2 L2 L2 L2 14 14 L3 50 50 L1 L2 32 32 32 32 3 Closed doors Open doors Closed doors Open doors L1 = Beam width L2 = Door width

Compatible beams: TYPE 5 / 7 SIZES CALCULATION - 3 doors L1 = L3 + 100

L2 = (L3 + 128) : 3 L4 = L3 - L2 - L2 + 68

Compatible beams: TYPE 5 / 7 SIZES CALCULATION - 4 doors L1 = L3 + 100

L1 = Beam width

L2 = Door width

L3 = Doorway width

(81)

G R E E N E

Door system

(D

L1 2 2 L2 14 L2 L3 L1 2 2 L3 L2 4 4 36 L4 2 32 L4 L1 2 2 L2 L2 14 L2 L3 4 4 14 L1 2 2 L2 L2 L3 36 4 32 Closed doors Open doors Closed doors Open doors L1 = Beam width L2 = Door width L3 = Doorway width

L4 = Clear doorway width

Compatible beams: TYPE 1 / 3 / 5 SIZES CALCULATION - 2 doors L1 = L3 - 4

L2 = (L1 + 10) : 2 L4 = L3 - L2 - 38

Compatible beams: TYPE 1 / 3 / 5 SIZES CALCULATION - 3 doors L1 = L3 - 4 L2 = (L1 + 24) : 3 L4 = L3 - L2 - L2 - 40 L1 = Beam width L2 = Door width L3 = Doorway width

(82)

Calculation of beam and door width L4 L1 2 2 L2 L2 14 L2 L2 L3 4 4 14 L1 2 2 L2 L2 L3 36 36 32 32 3

G R E E N E

Door system

(D

Closed doors

Open doors

Compatible beams: TYPE 1 / 3 / 5 SIZES CALCULATION - 4 doors L1 = L3 - 4 L2 = (L1 + 21) : 4 L4 = L3 - L2 - L2 - 72 L1 = Beam width L2 = Door width L3 = Doorway width

(83)

(84)

(85)

Technical details

Shelving system for the living room or bedroom, equipped with structural uprights in anodised aluminium, with shelves and units in Decomat bi-laminate. The uprights can be used as low voltage conductors to supply LED bars, which can be added to lower supporting rods of the shelves or units – this system allows for electrical power supply without the use of visible cables between the shelves.

Uprights

Made of anodised aluminium profi le, matt black varnished, with internal rack (32 mm. distance) for shelves, units, or clothes rods. Each upright is equipped with adjustable lower foot and adjustable upper fi xing device (upper device is found only on uprights for ceiling installation). Lower foot fi tted with anti-slip supports.

The uprights may be installed using three different methods: 1) FLOOR / CEILING installation (island use) – 2) FLOOR / CEILING / WALL installation – 3) WALL / FLOOR installation.

The uprights, when LED lighting is included on shelves or units, work as conductors of low voltage electrical current – this allows for the installation of the Brompton system without cables to connect the various lights.

Accessories and auxiliary equipment are available for wall installation, in order to solve any situation that may arise from the project.

Shelves

Shelf made of MDF medium density agglomerated chips, 10 mm thickness, covered with Decomat bi-laminate with polypropylene laser edge. 45° folding technique edge. Each shelf is equipped with 2-front lip. Lower supporting rod in aluminium.

Units

Units made of MDF medium density agglomerated chips (the structure is 19 mm. thick, the drawer and the front panel are 10 mm. thick), covered with Decomat bi-laminate with polypropylene laser edge. Side, upper and lower panels are assembled using the 45° folding technique. Internal drawers (structure and front panel) made of MDF medium density agglomerated chips, 10 mm. thick, covered with Decomat bi-laminate with polypropylene laser edge. Totally extractable glides – capacity 40 kg. – with soft closure device. APRILE 2 handle, black matt.

(86)

B R O M P T O N

ALUMINIUM – (anodised extruded aluminium profi le) – Uprights / rods / clothes rods

DECOMAT – (Bi-laminate – Polypropylene laser edge) – Shelves / Units

Black anodised

Black

(87)

B R O M P T O N

System with accessories

Technical charts- Plan, elevation and sections

A-A

B-B

C-C

180 550 350 540 10 OPTIONAL 20 10 30 = = 267 167 350 / 550 25 25

A

B

C

267 25 600 / 900 / 1200 600 / 900 / 1200 600 / 900 / 1200 / 1500 H1 H2

= controlled cable (electrical supply) 220 V (Europe) – 110 V (USA) H1 = variable height, based on installer’s choice

H2 = variable height, based on installer’s choice

(88)

B R O M P T O N

System with accessories

Technical charts of accessories

1

2

3

4

1

55 545 / 845 / 1145 55 214 55 19 10 600 / 900 / 1200

2

55 545 / 845 / 1145 55 426 55 600 / 900 / 1200 55 545 / 845 / 1145 / 1445 55 600 / 900 / 1200 / 1500

4

30 55

3

55 545 / 845 / 1145 / 1445 55 600 / 900 / 1200 / 1500 55 30 10 20 10 30 = = 350 / 550 OPTIONAL 550 540 10 550 540 10

(89)

B R O M P T O N

Chart of upright, feet and rack adjustments

25

9

25

9

15

30

55

16

32

25

Adjustment of rack internal profi le Upper adjustment Lower adjustment (The external profi le

(90)

B R O M P T O N

System with accessories

Polarity chart - AC adapters positioning

+

NO

OK

(91)

B R O M P T O N

Lighting detail – Positioning and sizes

125

LED

L - 250

L

= 600 / 900

1200 / 1500

125

LED

L - 250

L

= 600 / 900

1200

(92)

(93)

(94)

(95)

(96)