S.No. Item Code Description of Items Qty Unit Net Rate Amount 1 2.8 Earth work in excavation by mechanical
means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
1.1 2.8.1 All kinds of soil. 5.00 cum 351.66 1758.00
2 5.3 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).
2.00 cum 13608.78 27218.00
3 5.9 Centering and shuttering including strutting, propping etc. and removal of form for :
3.1 5.9.3 Suspended floors, roofs, landings, balconies
and access platform 8.00 sqm 965.97 7728.00
4 5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
4.1 5.22A.6 Thermo-Mechanically Treated bars of grade
Fe-500D or more. 244.00 kg 116.38 28397.00
Schedule of Quantity
Sub-Head
:-
Sub-Work:-Special Repair Works at CRPF Campus Awantipora, Pulwama (J&K).
Renovation / Repairing of Toilet, Bathroom and Kitchen and finishing work of Type-II Qtrs (30 Nos.) at CRPF Awantipora Pulwama (J&K). Flooring and Repairing of toilet and bathroom and improvement of staircase of Adminstration Block at CRPF Awantipora Pulwama (J&K).Renovation and Repairing of drainage, seepage, sewer line of Type II Qtrs at CRPF Awantipora Pulwama (J&K).
External and Internal finishing works in Adm Block-01 i/c tiling work at CRPF Campus Awantipora, Pulwama (J&K),Flooring of Ground floor with Vitrified Tiles in Rooms & granite in Corridor of Adm Block-02 at CRPF Campus Awantipora, Pulwama
(J&K).Covering of Balconies in T-III Qtrs with SS railing & roof sheet and flooring with vitrified tiles in Drawing rooms at Ground Floor at CRPF Campus Awantipora, Pulwama (J&K).Flooring with Granite in GO,s Mess & T-V Qtr Staircase at CRPF Campus
Awantipora, Pulwama (J&K).Whitewash & Repairwork in Electrical Substation (02 Nos.) Name of Work :-
S.No. Item Code Description of Items Qty Unit Net Rate Amount 5 8.10 Providing and fixing stone slab with table
rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
5.1 8.10.2 Granite Stone of approved shade 2.00 sqm 4483.72 8967.00
6 8.31 Providing and fixing Ist quality ceramic glazed wall tiles (300mm x 450mm) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
110.00 sqm 1436.03 157963.00
7 N.S Add extra for providing and fixing wall tile 300x600 mm instaed of 300X450 mm in
item No.6 36.00 sqm 308.52 11107.00
8 9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
8.1 9.97.2 250x10 mm 4.00 each 144.33 577.00
8.2 9.97.4 150x10 mm 8.00 each 104.54 836.00
8.3 9.97.5 100x10 mm 8.00 each 81.05 648.00
9 9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
9.1 9.100.1 125 mm 4.00 each 83.14 333.00
S.No. Item Code Description of Items Qty Unit Net Rate Amount
10 10.25 Steel work welded in built up
sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
10.1 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
195.00 kg 182.59 35605.00
11 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
100.00 kg 802.06 80206.00
12 11.39 Providing and laying rectified Ceramic glazed floor tiles (anti skid) of size 400x400 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
S.No. Item Code Description of Items Qty Unit Net Rate Amount 13 11.41A Providing and laying vitrified floor tiles in
different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc.. The tiles must be cut with the zeo chipping diamond cuter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
13.1 11.41A.1 Double charge virtified tile polished finish of size.
13.1.1 11.41A.1.1 Size of Tile 600x600 mm 241.00 sqm 1842.81 444117.00
14 NS Based on 11.46.2
Providing and laying double charge Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.
14.1 Size of Tile 600x600 mm 28.00 sqm 1896.61 53105.00
15 11.55 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. (in one piece in staircase steps)
15.1 11.55.1 Flamed finish granite stone slab Jet Black, Cherry Red,Elite Brown, Cat Eye or
S.No. Item Code Description of Items Qty Unit Net Rate Amount 16 11.56 Providing and laying Polished Granite stone
flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. (in one piece in staircase steps)
16.1 11.56.1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
44.00 sqm 4915.38 216277.00
17 12.50 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 micronsminimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
17.00 sqm 874.68 14870.00
17 13.42 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification.
S.No. Item Code Description of Items Qty Unit Net Rate Amount 18 13.48A Finishing walls with 100% Premium acrylic
emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004,Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.
18.1 13.48A.1 New work (Two or more coats applied @ 1.43 litre/10 sqm. Over and including priming coat of exterior primer applied @
0.90 litre/10 sqm. 684.00 sqm 203.77 139379.00
19 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface
even and smooth complete. 2048.00 sqm 160.50 328704.00
20 13.91 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
2040.00 sqm 25.44 51898.00
21 13.92 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
21.1 13.92.1 Old work (one or more coats) 579.00 sqm 99.03 57338.00
22 13.99 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
22.1 13.99.1 One or more coats on old work 593.00 sqm 111.43 66078.00
23 15.2 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
23.1 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c
equivalent design mix) 15.00 cum 2421.66 36325.00
24 15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of
Engineer - in- charge. 1.00 cum 3532.86 3533.00
25 15.7 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
S.No. Item Code Description of Items Qty Unit Net Rate Amount 26 15.13 Taking out doors, windows and clerestory
window shutters (steel or wood) including stacking within 50 metres lead :
26.1 15.13.2 Of area beyond 3 sq. metres 2.00 each 196.11 392.00
27 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
110.00 sqm 54.36 5980.00
28 15.60 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading,transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
20.00 cum 193.53 3871.00
29 17.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
29.1 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type
foot rests 2.00 each 7556.49 15113.00
30 17.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
30.1 17.2.1 W.C. pan with ISI marked white solid plastic
S.No. Item Code Description of Items Qty Unit Net Rate Amount 31 17.5 Providing and fixing white vitreous china
flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :
31.1 17.5.3 Range of three half stall urinals with 10 litre
P.V.C. automatic flushing cistern 6.00 each 24123.26 144740.00
32 17.7A Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever
required:-32.1 a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single
hole basin mixer 4.00 each 6138.02 24552.00
33 17.8 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and
fittings. 4.00 each 1979.41 7918.00
34 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer
-in - charge. 2.00 each 414.73 829.00
35 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
35.1 17.28.1 Flexible pipe
35.1.1 17.28.1.1 32 mm dia 10.00 each 122.24 1222.00
36 17.32 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
36.1 17.32.4 Rectangular shape 1500x450 mm 2.00 each 2490.09 4980.00
37 17.34 Providing and fixing toilet paper holder :
S.No. Item Code Description of Items Qty Unit Net Rate Amount 38 17.35 Providing and fixing soil, waste and vent
pipes :
38.1 17.35.1 100 mm diameter :
38.1.1 17.35.1.2 Centrifugally cast (spun) iron socket &
spigot (S&S) pipe as per IS: 3989 40.00 metre 1522.31 60892.00
39 17.36 Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :
39.1 17.36.2 100 mm dia pipe 20.00 each 206.91 4138.00
40 17.38 Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
40.1 17.38.1 100 mm dia pipe
40.1.1 17.38.1.2 Sand cast iron S&S as per IS - 3989 4.00 each 643.45 2574.00
41 17.39 Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
41.1 17.39.1 100 mm dia pipe
41.1.1 17.39.1.2 Sand cast iron S&S as per IS : 3989 4.00 each 544.63 2179.00
42 17.43 Providing and fixing plain bend of required degree.
42.1 17.43.1 100x100x100 mm
42.1.1 17.43.1.2 Sand cast iron S&S as per IS : 3989 4.00 each 1007.09 4028.00
43 17.60 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
43.1 17.60.1 100 mm inlet and 100 mm outlet
43.1.1 17.60.1.1 Sand cast iron S&S as per IS - 3989 8.00 each 2108.19 16866.00
44 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour,
weighing not less than 88 gms. 4.00 each 318.07 1272.00
45 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
45.1 17.73.1 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
S.No. Item Code Description of Items Qty Unit Net Rate Amount 46 18.7 Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall
46.1 18.7.2 20 mm nominal outer dia Pipes 50.00 metre 427.83 21392.00
47 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
47.1 18.8.1 15 mm nominal outer dia Pipes 100.00 metre 570.97 57097.00 47.2 18.8.2 20 mm nominal outer dia Pipes 50.00 metre 666.45 33323.00
48 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions :
48.1 18.21.2 45 cm length
48.1.1 18.21.2.1 15 mm nominal bore 24.00 each 115.69 2777.00
49 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for
tank. 1000.00 litre 12.27 12270.00
50 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
50.1 18.49.1 15 mm nominal bore 4.00 each 583.93 2336.00
51 18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
51.1 18.51.1 15 mm nominal bore 4.00 each 769.87 3079.00
52 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
S.No. Item Code Description of Items Qty Unit Net Rate Amount 53 18.58 Providing and fixing PTMT grating of
approved quality and colour. 53.1 18.58.1 Circular type
53.1.1 18.58.1.1 100 mm nominal dia 4.00 each 52.83 211.00
54 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106
gms. 4.00 each 181.89 728.00
55 19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
55.1 19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
55.1.1 19.7.1.1 With common burnt clay F.P.S. (non
S.No. Item Code Description of Items Qty Unit Net Rate Amount 56 21.1 Providing and fixing aluminium work for
doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling
and dash fasteners to be paid for separately) :
56.1 21.1.1 For fixed portion
56.1.1 21.1.1.2 Powder coated aluminium (minimum
thickness of powder coating 50 micron) 114.00 kg 635.99 72503.00
56.2 21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
56.2.1 21.1.2.2 Powder coated aluminium (minimum
thickness of powder coating 50 micron) 84.00 kg 761.50 63966.00
57 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
57.1 21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)
11.00 sqm 1806.92 19876.00
58 N.S Credit to the department of unserviceable material at site i.e. to be received from dismantling of item no. 26.1
2.00 each -300.00 -600.00
