Want to know where is your mobile come from and their build quality?
Here is a short reference. You MAY or MAY NOT trust this information below.
Check your phone IMEI:
e.g: 345678200345678
If the 7th and 8th number is 20
then it is come from China = Bad quality
02 or 20 : From China = Bad quality
08 or 80 : From Germany = Quality not bad
01 or 10 : From Finland = Good quality
00 or 03 or 04 : Origin from the cell phone company = Extremely good quality
13 : From Azerbaijan = Extremely poor quality
Nokia Codes Tips and Tricks
To check the IMEI (International Mobile Equipment Identity)
Type-*#06#
Information you get from the
IMEI-XXXXXX XX IMEI-XXXXXX X
TAC FAC SNR SP
•
TAC = Type approval code
•
FAC = Final assembly code
•
SNR = Serial number
•
SP = Spare
To check the phones Software revision
type-*#0000#
Information you get from the Software
revision-V 05.31
18-02-99
NSE-3
•
1ST Line = Software revision
•
2ND Line = The date of the software release
•
3RD Line = Phone type
To enter the service menu
type-*#92702689# (*#WAR0ANTY#)
•
Serial number (IMEI)
•
Production date (MM/YY)
•
Purchase date (MM/YY) You can only enter the date once.
•
Date of last repair (0000=No repair)
•
Transfer user data to another Nokia phone via Infra-Red
Clock Stopping
To check weather your SIM Card supports clock stopping
type-*#746025625# (*#SIM0CLOCK#)
Revealing the Headphone and Car-Kit menus
Please note that if you do these next tricks, the new menus can't be erased without retoring the
factory default settings. To do these tricks you need to short-circuit the pins on the bottom of the
phone next to where you plug in you charger.
1. To activate the "Headset" menu, you need to short-circuit pins "3" and "4". After a short time the
word "Headset" will be shown in the display. Menu 3-6 is now enabled.
2. To activate the "Car" menu, you need to short-circuit pins "4" and "5". After a short time the word
"Car" will be shown in the display. Menu 3-7 is now enabled.
THE REBOOT TRICK
This should work on all software versions of the 6110.
1. Go to the Calendar (Menu-8)
2. Make a note or reminder.
3. Enter some text into the edit box.
4. Hold "Clear" until the whole text is cleared, then press "Back".
5. Press "0". The main screen will now be showing but a space appears on the screen. (you can't see
it)
6. Enter 4 digits (e.g. 1234).
7. Use the down arrow to move the cursor to the left side of the numbers and the space (Down arrow
twice).
8. Now enter 6 digits and press the call button.
Wait for a few seconds, the screen should start to flash and reboots. It should alsowork on other
menus like the "Profiles" menu.
EFR CALL QUALITY
To activate EFR (Enhanced Full Rate) Enter the
code-*3370#
This improves call quality but decreases batterylife by about 5%
To deactivate it, Enter the
code-#3370#
THE JAMES BOND TRICK
If you short-circuit theleft middle and right pins on the bottom of the phone with all connections
touching each other, the Nokia software hangs! The profile "Headset" will be activated. Before you do
this just activate the "Automatic Answer" in the headset profile and set the ringing volume to "Mute".
Now you can use your phone for checking out what people are talking about in a room. Just place it
under a table in a room and call it. The phone receives the call without ringing and you can listen to
what people are saying.
NETWORK MONITOR
There is a hidden menu inside your Nokia phone. If you want to activate it, you'll have to re-program
some chips inside of your phone.
1. Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.
2. Take apart the phone.
3. De-solder the EEPROM (ATMEL AT 24C64).
4. Read out the data with an EEPROM programmer and save it to a file (Backup).
5. If you have v.33 or v4.73, change the address "03B8" from "00" to "FF".
6. If you have v5.24 then change the address "0378" from "00" to "FF".
7. Write the new data to the EEPROM and solder it back to the phone,
8. Power on your phone and you should have "Netmonitor" enabled.
The Network Monitor gives you the following information.
•
Carrier number
•
MS RX Level in DBM
•
Received signal quality
•
MS TX power level
•
C1 (Path loss criterion, used for cell selection and reselection). The range is -99 to 99.
•
RTL (Radio link timeout).
•
Timeslot
•
Indication of the transmitter status
•
Information on the Network parameters.
•
TMSI (Temporary Mobile Subscriber Identity).
•
MCC (Mobile country code)
•
MCN (Mobile network code)
•
LAC (Location area code)
•
Ciphering (On/Off)
•
Hopping (On/Off)
•
DTX (On/Off)
•
Discard cell barred information
CHECK SIM-LOCK
Note - If you bought your Nokia on UK Vodafone or UK Cellnet you do not need to check this
because they both transmit on GSM900, and they don't lock the phones. However if you bought your
phone on UK Orange or UK One2one your phone may be blocked. The reason is that they both
transmitt on GSM1800. To make a call on GSM1800 you need what is known as a "Dual band"
phone. A dual band phone is able to transmit on both GSM900 and GSM1800, so they lock the
phones so you can't use it with any other network simcard. If you find that your phone is locked you
can try different software to unlock it. (we havn't found one that works yet), or you can ask your
service provider who will gladly exchange the 10 digit code for about £35.
This is how to check the status of the 4 different locks. Aslo don't try entering the wrong number,
because after 3 times it will block the phone for good.
There are 4 different locks on your Nokia phone.
•
COUNTRY-LOCK
•
NETWORK-LOCK
•
PROVIDER-LOCK
•
SIMCARD-LOCK
The code to read out the sim-lock status of your phone is
#PW+(MASTERCODE)+(Y)#
•
# = DOUBLE-CROSS
•
W = PRESS "*" THREE TIMES
•
P = PRESS "*" FOUR TIMES
•
+ = PRESS "*" TWO TIMES
•
MASTERCODE = 1234567890
•
Y = NUMBER 1 TO 4
The master code is a secret code. The code has 10 digits, To read out the sim-lock status you can
enter every combination you want!
"Y" Shows the status of the network-lock. Here you can enter a number from "1" to "4". The "4" is for
the sim-card lock.
SIM-LOCK CHECKS
•
#PW+1234567890+1# = GIVES PROVIDER-LOCK STATUS
•
#PW+1234567890+2# = GIVES NETWORK-LOCK STATUS
•
#PW+1234567890+3# = GIVES COUNTRY-LOCK STATUS
•
#PW+1234567890+4# = GIVES SIM-CARD-LOCK STATUS.
How to Find the IMEI Number on a Mobile Phone
Having your cell phone or tablet stolen is not just a bad day at the zoo, it potentially compromises your safety
and security. Thanks to the FCC (back in the age of the dinosaurs, the early '80s), ESNs were created to give a
unique identifiers to mobile devices. Since then, usage of mobile devices has exploded, and the ESN of yore
became the IMEI (International Mobile Equipment Identity) and the MEID (Mobile Equipment ID—a superset
of IMEI) of today.
If a phone, iPad, or other mobile device is stolen, carriers in some countries can blacklist the IMEI or MEID so
that the thief cannot use the phone in any capacity (regardless of whether or not the SIM card has been
replaced). This is a number you should keep on file, in a secure place, should the need ever arise. We'll show
you a few tips on how to do this.
Steps
Keypad Method
Dial it in. Most phones have a very simple key-in method to retrieve IMEI/MEID numbers: enter a 5-digit string—*#06#—and the number will be displayed on your phone.
This is not true for all carriers or phones. For example, while an iPhone on the AT&T network will return the MEID number, an iPhone on the Verizon network dials the number and reaches a recording that says, "Your call cannot be completed as dialed." Good thing there are other methods!
Go to the dial screen on your phone. On the keypad, enter *#06# without any spaces, as shown:
Copy your IMEI. The IMEI will appear as you dial the final character, and should call the information automatically without your
having to hit dial or send.
Consider adding *#06# as a phone contact. That way you don’t have to look it up again! The Battery Method
Turn the phone completely off. As with any electronic device, it's always best to power down before you start poking around the innards. It's doubtful the phone will give you a jolt, but you could fritz out phone easily, and then what good would there be in having your IMEI?
Remove the back cover. Slide the back open carefully, and remove the battery.
Find the IMEI. Look in the empty battery slot for a white label noting the IMEI (highlighted in yellow here). It should be 15 or 17 digits, not including a few forward slashes, and shouldn’t contain any letters. Only the first 15 digits are needed.
iPhone and iPad1
Tap Settings. This will open up the Settings window where you can set and see all your preferences.
Scroll down to General, and tap that. You will be shown a list of all the basic information about your pad or tablet. Tap the About field, hightlighted on the iPhone below:
3
Locate your MEID. Scroll down the information list that tells you about your songs, videos, photos, etc. Towards the bottom, you will see MEID and to the right of that, a 14-digit number. This is your MEID. Shown below on an iPad:
Look on iTunes. Connect your iPhone to your computer, and launch iTunes.5
Locate your phone. It will be listed on the left-hand column, under the heading Devices. At the top you will see a picture of your phone, along with your name, capacity, software version, serial number, and phone number.6
Click on your phone number. When you click on your phone number in iTunes, it will toggle between your number and your MEID.
Android
Use the dial method. From the phone keypad, enter *#06#, and your IMEI will be displayed. 2
Look under the battery. Like all phones with an accessible battery, the IMEI is located on a label underneath. 3
Look in settings. From the home screen, press Menu, then Settings, then About phone, and then Status. Your IMEI (or IMSI) will be located on the resulting screen.
Motorola iDen Units
Turn on your phone. Power up your phone and go to the dialing screen. Press the following key sequence in rapid succession: # * [menu] [right arrow]. Try not to pause or linger.
2
Locate your IMEI. On units with SIM cards, scroll down until you see IMEI/SIM ID and select Enter. From here you can view your IMEI, SIM, and on some units, your MSN. The first fourteen digits are displayed; the fifteenth is always a 0.
On older units without SIM cards:
Continue to hit the [right arrow] key until you see IMEI [0] on the display. The first seven digits are displayed.
Hit the menu key and then the "soft key" under "next" to display the next seven digits. The fifteenth and final digit is most often a 0. Lost or Stolen Phone
Locate the original packaging for your mobile device. Don’t worry about the booklet; look for the box. 2
Locate the barcoded label stuck to your box. It might have been placed over the opening to act as a seal. 3
Look for the IMEI. It should be clearly labeled and is usually listed together with the barcode and serial number. Tips
Write your IMEI down before your phone gets lost or stolen.
Not all phones have an IMEI number. Currently, it’s on all GSM and UMTS mobile phones commonly found in Europe, Asia, Africa, Australia, and increasingly in America. AT&T & T-Mobile are the major US carriers using GSM with IMEI numbers, but there are growing numbers of regional carriers who are switching to GSM like Centennial Wireless, Highland Cellular, Dobson Cellular to name a few. Verizon and Sprint phones will generally not have IMEI numbers but rather MEID numbers—unless they have a dual mode module for overseas use. Most pre-paid and non-contract phones in America don’t have IMEIs; the same applies to disposable phones throughout Europe, Asia, and Africa.
If your mobile phone is stolen, you can call or go to the nearest service center of your mobile network and give that IMEI number to staff to block your phone.
If you are South African, you are required by law to report the theft to your service provider and to the police (either SAPS or your local Metro Police). It will be blacklisted across ALL networks so that it can't be used for criminal activities. If it is recovered, it is possible to de-blacklist it provided that you have proof of ownership.
Warnings
Blocking a stolen or lost phone via the IMEI will cut off all communication between your phone and your carrier, making it impossible for the phone to be recovered via tracking. Only do this as a last resort if your phone contains sensitive information. Some thieves replace the IMEI numbers of phones they steal with the IMEIs of other devices. If you purchased a phone from someone or someplace you don’t quite trust, try to research whether or not your supposed IMEI actually goes with that model of phone.
Analysis of IMEI numbersAll mobile phones are assigned a unique 15 digit IMEI code upon production. Below you can check all known information regarding manufacturer, model type, and country of approval of a handset.Tip! The IMEI can be displayed on most mobile handsets by dialling *#06#. Otherwise check the compliance plate under the
battery.Enter IMEI number below Example: 350077-52-323751-3
Information on IMEI
Type Allocation Holder Nokia
Mobile Equipment Type Nokia 9300
GSM Implementation Phase 2/2+
IMEI Validity Assessment >|< Very likely
Information on range assignment
Est. Date of Range Issuance Around Q3 2004
Reporting Body British Approvals Board of Telecommunications (BABT)
Primary Market Europe
Legal Basis for Allocation EU R&TTE Directive Information on number format
Full IMEI Presentation
Reporting Body Identifier 35 Type Allocation Code
Serial Number
Check Digit 8
Bonyeza hapa utaipata hii website International Numbering Plans, © 2001-2012
Bonyeza hapa http://www.numberingplans.com/?page=analysis&sub=imeinr
IMEI stands for The International Mobile Equipment Identity. It is a number unique to every GSM and WCDMA and iDEN mobile phone as well as some satellite phones. It is usually found printed on the phone underneath the battery. All mobile phones are assigned a unique 15 digit IMEI code upon production. You can find it by typing *#06# on your handset.
Now you can check the validity of IMEI number of your mobile phone by visiting NumberingPlansand entering your unique 15 digit IMEI code. After entering 15 digit IMEI code you will get the information regarding manufacturer, model type, and country of approval of a handset.
By the way if you are wondering about the of need of checking the validity of IMEI number of a mobile phone, then here comes the very simple answer:
Suppose your mobile phone with a valid IMEI number is stolen, now if you know your valid IMEI number you can call your network provider and instruct them to “ban” the phone using its IMEI number. Now IMEI number is generally valid when you buy a mobile phone through a cellular operator, but in some other cases there are chances that your newly bought mobile phone may have invalid IMEI number. So its always better to check the validity of your mobile phone’s IMEI number.
How To Block Lost/Stolen Mobile phone Using IMEI Number
International Mobile Equipment Identity or IMEI number is a unique number for every GSM, WCDMA and iDEN mobile phone as well as some satellite phones. We have already covered some important IMEI aspects onVirginTech, like how to
check IMEI validity, how to find a valid IMEI number and how to find iPhone IMEInumber. If you’ve not gone through them earlier, I would recommend you to take a minute to go through them.
How to block Lost/Stolen Mobile Phone using IMEI number:
Mobile phones have a IMEI number associated with them which you must note down at some secret location. The point that makes these IMEI numbers very important is that with the help of IMEI number you can impose a ban on your stolen or lost mobile phone.
If you have IMEI no of your stolen phone then report it to your local operator to block the device. This makes your network provider to put your phone’s IMEI no in a shared database called as an Equipment Identity Register (EIR) which reduces the threats of theft of handsets by enabling individual operators to prevent the use of stolen handsets in their own network.
Now to make the stolen phone inaccessible in other networks (service providers) also, your IMEI no is transferred to Central Equipment Identity Register (CEIR) which is a database of the IMEI numbers of blacklisted handsets. Once the device number is listed on CEIR, it wouldn’t work with any of the network provider.
Reporting Body Identifier codes
According to Permanent Reference Document TW.06, Appendix A of the GSM Association, the current RBI codes indicate the following approval/allocation bodies:
Code Group/indication Origin
00 Test IMEI Nations with 2-digit CCs 01 PTCRB United States
10 DECT devices
30 Iridium United States (satellite phones)
33 DGPT France
35 BABT United Kingdom
44 BABT United Kingdom
45 NTA Denmark
49 BZT / BAPT Germany
50 BZT ETS Germany
51 Cetecom ICT Germany
52 Cetecom Germany
53 TUV Germany
54 Phoenix Test Lab Germany
86 TAF China
91 MSAI India
98 BABT United Kingdom
99 GHA For multi RAT 3GPP2/3GPP
Normally, when a RBI is 35, the phone device has 1800 band, but if its 01, it will not have it, e.g. Motorola, Nokia. There are some exceptions for the RBI 01, e.g. on LG and Sony Ericsson.
Reporting Body Identifier vs Regional Code
The "Reporting Body Identifier" is also known as the Regional Code in the CDMA world. The IMEI and MEID structures are superficially the same except that the first two digits must be decimal for an IMEI, and must be hexadecimal for an MEID. In 3GPP2 speak the GSMA is the Global Decimal Administrator while the TIA is the Global Hexadecimal Administrator.
Phone compatibility
Check your phone will work on XT.
Do you have a phone or data device that you bought from someone other than Telecom? Take the steps below to check its compatibility with Telecom Mobile on our XT Mobile Network. You'll need your device identification (IMEI) number.
What else you should know...
XT is a 3G network, using the 850mhz and 2100mhz frequencies.
If your phone is incompatible with EITHER of the 850mhz or 2100mhz frequencies, it's likely to receive limited or no reception, meaning calling, texting and data will perform poorly or not at all. Please check your phone or device specifications to ensure it is compatible.
The information in our IMEI checker is indicative only, and doesn't guarantee that your device can connect to our Smartphone Network. Also, please be aware that some services may be different or unavailable with a device that was not sourced from Telecom.
We recommend you test your device with a Telecom SIM - just visit us in store to try one out! Tested on iPhone, Nokia, Samsung, LG, Sony Ericsson and Motorola phones. However, it should work on any brand.
Press *#06# on your phone and the International Mobile Equipment Identity (IMEI) number appears. Then check the 7th and 8th digit.
1 2 3 4 5 6 7th 8th 9 10 11 12 13 14 15
Phone IMEI No. x x x x x x ? ? x x x x x x x
IF the Seventh & Eighth digits are 02 or 20 this means your cell phone was assembled in China which is of low quality. IF the Seventh & Eighth digits are 08 or 80 this means your cell phone was manufactured in Germany which is of fair quality. IF the Seventh & Eighth digits are 01 or 10 this means your cell phone was manufactured in Finland which is of very good quality.
IF the Seventh & Eighth digits are 00 this means your cell phone was manufactured in original factory which is the best phone quality.
IF the Seventh & Eighth digits are 13 this means your cell phone was assembled in Azerbaijan which is of very bad quality and may also be dangerous for your health.
Other 7th and 8th digits exist representing other countries however we will not put them online before we can confirm them. Once we have confirmation, we will add them to the list above.
