References, Reference List
2006-09-01
Staffan Granström, the president and one of the owners of ESSGE Systemteknik AB, is Swedish citizen and has engineering degrees in mechanical and electrical technology and long experience from mechanical design, electrical design, calculation and process
technology of electrical furnaces for metallurgical industries.
Staffan Granström has 17 years of experience from employment for ASEA AB, now ABB, and 23 years of experience as consult for steel plants and suppliers of steel plant
equipment all over the word and in industrial engineering especially of high temperature scrap preheating combined with post combustion of organic compounds, such as
hydrocarbons, chlorinated aromatics and dioxins, development of computers programs and simulations of arc furnace operations.
1980 to 1984 Staffan Granström was member of the UIE Disturbances Committee for development of the international recognised flicker meter, the UIE meter.
Apart of the enclosed personal references of Staffan Granström, he has with beginning of 1987, carried out a lot of consultant services for different steel plants in Italy, Spain, France, Belgium, Germany, Scandinavia and North America.
The commissions have basically included production and cost evaluation studies around the electrical melt shop and dimensioning and basic engineering of furnace transformers with series reactors for high power and power factor operations evaluations of scrap preheating systems, feasibility studies comprising modernisation of steel plant with arc furnaces, high temperature scrap preheating, shaft furnaces, ladle furnaces, phase compensation, process control and gas cleaning systems for arc furnaces and ladle furnaces.
These studies have led to substantial improvements in plant operation through new concepts on EAF revamp, guide lines on EAF operation together with Static Var Compensator (SVC) systems and diverse proposals in areas like preheating and pre-cleaning of scrap for increased production, improved environment and increased safety at production of steel to improve plant efficiency under todays tight and restricted
The commissions, so far, have been:
Impedance and Impedance Distribution for Secondary Systems to Arc Furnaces
Danieli & C, SpA (Various projects) Italy 1991
Centro-Met AB (Various projects) Sweden 1991
Furnace Transformer and Series Reactor Ratings (Dimensioning, technical specifications)
Acciaierie Ferriere del Tanaro SpA Italy 1987
Sidergurgica Sevillana S.A. Spain 1987
Accieries et Laminoirs de Paris (A.L.PA) France 1989
Ovako Steel Metallurgy AB Sweden 1989
Uddeholm Tooling AB Sweden 1989
Thy-Marcinelle S.A. Belgium 1990
Henningsdorfer Elektrostahlwerke GmbH Germany 1992 Danieli & C, SpA (Various projects) Italy 1991
Centro-Met AB (Varoius projects) Sweden 1991
Concast Standard AG Switzerland 1996
Keystone Steel & Wire USA 1997
CELSA Spain 1998
Det Danske Stålvalsevaerk A/S (DDS) Denmark 1998
Tehuantepec (HATCH Associates) Mexico 1999
Scana Björneborg AB Sweden 1999
ILVA SpA Italy 1999
Siderurgica Sevillana S.A. Spain 1999
SAM, Neuves-Maisons France 2001
Riva Acciaio SpA, Caronno Italy 2002
ABB Automation Technologies AB (Furnace Sweden 2004 project in Egypt)
Series Reactor for Arc Furnaces (Dimensioning, technical descriptions, technical specifications, inquiry documents, investment and profitability calculations)
AB Sandvik Steel Sweden 1989
Danieli & C, SpA (Various projects) Italy 1991 Centro-Met AB (Various projects) Sweden 1991
Fundia Special Bar AB Sweden 1996
Keystone Steel & Wire USA 1997
Electrical Systems, Furnace Transformers for Arc Furnaces and Ladle Furnaces
(Function descriptions, technical specifications, inquiry documents, guarantee specifications)
Ovako Steel Profiler AB Sweden 1989
Union Miniere S.A. Belgium 2000
SAM, Neuves-Maisons France 2001
Process Control of Arc Furnaces and Ladle Furnaces (Function descriptions, block diagrams, technical documentations, inquiry documents)
AB Sandvik Steel Sweden 1989
Avesta AB, Avesta Jernverk Sweden 1989
Ovako Steel Profiler AB Sweden 1989
Furnace Condition and Loss Analysis for Arc Furnaces
A.L.PA France 1988
Feasibility Study of Modernisation of Steel Plant comprising of revamp of electric arc furnace, new arc furnace, ladle furnace, high temperature scrap preheater, gas cleaning system and new melt shop
Acciaierie Ferriere del Tanaro SpA Italy 1988
Basic Study of Electric Arc Furnace Installation in Integrated Steel Plant comprising study of different arc furnace concepts, different scrap preheating concepts, different SVC and VSC concepts for flicker reduction, sizing of furnace transformers, melting process and optimisation of rated power in SVC, etc..
Power and Energy Supply of Steel Plant (Feasibility study regarding power and energy supply to arc furnace, ladle furnace, rolling mill, phase compensation (SVC), high
temperature scrap preheating and proposal of future development potentials etc.)
Uddeholm Tooling AB Sweden 1989
Thy-Marcinelle S.A. Belgium 1990
Danieli & C SpA (Various projects) Italy 1991
Siderurgica Sevillana S.A. Spain 1994
Brandenburger Elektrostahlwerke GmbH Germany 1997 Henningsdorfer Elektrostahlwerke GmbH Germany 1997
Keystone Steel & Wire USA 1997
Fundia Bygg AS Norway 1997
Brandenburger Elektrostahlwerke GmbH Germany 1998 Henningsdorfer Elektrostahlwerke GmbH Germany 1998
Siderurgica Sevillana S.A. Spain 1999
Brandenburger Elektrostahlwerke GmbH Germany 2002 Henningsdorfer Elektrostahlwerke GmbH Germany 2002
Load Curves for Arc Furnaces
Acciaierie Ferriere del Tanaro SpA Italy 1988 Acciaierie Ferriere de Caronno SpA Italy 1988
Siderurgica Sevillana S.A. Spain 1988
A.L.PA France 1989
Iton Seine S.A. France 1989
Thy-Marcinelle S.A. Belgium 1990
Officine é Fonderie Galtarossa SpA Italy 1991
Centro-Met AB (Various projects) Sweden 1991
Danieli & C, SpA (Various projects) Italy 1991
Centro-Met AB (Various projects) Sweden 1991
Acciaierie Ferriere del Tanaro SpA Italy 1994 Acciaierie Ferriere de Caronno SpA Italy 1994 Officine é Fonderie Galtarossa SpA Italy 1994
A.L.PA France 1994
Iton Seine S.A. France 1994
Siderurgica Sevillana S.A. Spain 1995
Thy-Marcinelle S.A. Belgium 1995
Brandenburger Elektrostahlwerke GmbH Germany 1995 Henningsdorfer Elektrostahlwerke GmbH Germany 1995
AB Sandvik Steel Sweden 1996
Fundia Bygg AS (Norsk Jernverk) Norway 1997
CELSA Spain 1998
Birmingham Steel Corporation, Jackson USA 1998 (ABB Industrial Systems Inc.)
Birmingham Steel Corporation, Birmingham USA 1998 (ABB Industrial Systems Inc.)
Acciaierie Ferriere del Tanaro SpA Italy 1998 Det Danske Stålvalsevaerk A/S (DDS) Denmark 1998
Scana Björneborg AB Sweden 1999
Melt down Programs and Furnace Operation Optimisation
Iton-Seine S.A. France 1994
A.L.PA France 1994
Officine é Fonderie Galtarossa SpA Italy 1994 Acciaierie Ferriere del Tanaro SpA Italy 1994 Acciaierie Ferriere di Caronno SpA Italy 1994
Siderurgica Sevillana S.A. Spain 1995
Henningsdorfer Elektrostahlwerke GmbH Germany 1995 Brandenburger Elektrostahlwerke GmbH Germany 1995
Thy-Marcinelle S.A. Belgium 1995
AB Sandvik Steel Sweden 1995
Fundia Bygg AS Norway 1997
Thy-Marcinelle S.A. Belgium 1997
Keystone Steel & Wire USA 1997
CELSA Spain 1998
Birmingham Steel Corporation, Jackson USA 1998 (ABB Industrial Systems Inc.)
Birmingham Steel Corporation, Birmingham USA 1998 (ABB Industrial Systems Inc.)
Acciaierie Ferriere del Tanaro SpA Italy 1998 Det Danske Stålvalsevaerk A/S (DDS) Denmark 1998 Nortwestern Steel & Wire (HATCH Associates) USA 1998
Scana Björneborg AB Sweden 1999
Nervacero S.A. Spain 1999
Siderurgica Sevillana S.A. Spain 2000
Avesta Polarit AB, Avesta Sweden 2001
Global Steel Wire S.A. Spain 2001
Riva Acciaio S p A, Lesegno Italy 2002
Riva Acciaio S p A, Caronno Italy 2002
Avesta Polarit AB, Avesta Sweden 2003
Tremorfa Steelworks (CELSA UK) Wales 2003
ICDAS CELIC A.S., Istanbul Turkey 2004
OVAKO Smedjebacken AB Sweden 2005
Production and Production Costs Analysis
Acciaierie Ferriere del Tanaro SpA Italy 1988
A.L.PA France 1988
Uddeholm Tooling AB Sweden 1989
Thy-Marcinelle S.A. Belgium 1990
Danieli & C, SpA (Various projects) Italy 1991 Henningsdorfer Elektrostahlwerke GmbH Germany 1992 Acciaierie Ferriere del Tanaro SpA Italy 1992
Siderurgica Sevillana S.A. Spain 1992
Iton Seine S.A. France 1992
Thy-Marcinelle S.A. Belgium 1993
Fundia Special Bar AB Sweden 1996
Concast Standard AG Switzerland 1996
Fundia Bygg AS (Norsk Jernverk) Norway 1997
Brandenburger Elektrostahlwerke GmbH Germany 1997 Henningsdorfer Elektrostahlwerke GmbH Germany 1997
Keystone Steel & Wire USA 1997
Acciaierie Ferriere del Tanaro SpA Italy 1998 Det Danske Stålvalsevaerk A/S (DDS) Denmark 1998 Northwestern Steel & Wire (HATCH Associates) USA 1998
Tehuantepec (HATCH Associates) Mexico 1999
Scana Björneborg AB Sweden 1999
ILVA S p A Italy 1999
Fundia Bygg AS (Norsk Jernverk) Norway 1999
Siderurgica Sevillana S.A. Spain 1999
Nedstaal B.V. (AGA AB) Netherlands 2000
Global Steel Wire S.A. Spain 2001
ABB Utilities AB (CELSA, Spain) Sweden 2001
Riva Acciaio S p A, Lesegno Italy 2002
Riva Acciaio S p A, Caronno Italy 2002
ABB Utilities AB (ACERALIA Olaberia, Spain) Sweden 2002 ABB Utilities AB (Global Steel Wire S.A, Spain) Sweden 2003
Tremorfa Steelworks (CELSA UK) Wales 2003
CELSA Huta Poland 2003
ICDAS CELIC A.S., Istanbul Turkey 2004
ABB Automation Technologies AB (Furnace Sweden 2004 project in Egypt)
OVAKO Smedjebacken AB Sweden 2005
Heating Cycles for Ladle Furnace (Computer simulations)
Acciaierie Ferriere del Tanaro SpA Italy 1988
Ovako Steel Profiler AB Sweden 1989
Uddeholm Tooling AB Sweden 1989
Thy-Marcinelle S.A. Belgium 1990
Danieli & C, SpA (Various projects) Italy 1991
Riva Acciaio S p A, Lesegno Italy 2002
SSAB Oxelösund AB (Team Met AB) Sweden 2005
Simulations of AC, DC Arc Furnaces, SVC Systems and Flicker Meters
Thy-Marcinelle S.A. Belgium 1991
Acciaierie Ferriere del Tanaro SpA Italy 1991 Danieli & C, SpA (Various projects) Italy 1991 Brandenburger Elektrostahlwerke GmbH Germany 1992 Danieli & C, SpA (Various projects) Italy 1992
Centro-Met AB (Various projects) Sweden 1992
Thy-Marcinelle S.A. Belgium 1993
Fundia Special Bar AB Sweden 1996
Brandenburger Elektrostahlwerke GmbH Germany 1997 Henningsdorfer Elektrostahlwerke GmbH Germany 1997
Keystone Steel & Wire USA 1997
S.N. Longos S.A. Portugal 1997
Acciaierie Ferriere del Tanaro SpA Italy 1998 Det Danske Stålvalsevaerk A/S (DDS) Denmark 1998 Northwestern Steel & Wire (HATCH Associate) USA 1998
Tehuantepec (HATCH Associates) Mexico 1999
Riva Acciaio S p A, Lesegno Italy 1999
ILVA S p A Italy 1999
Nervacero S.A. Spain 1999
Siderurgica Sevillana S.A. Spain 1999
Avesta Polarit AB, Avesta Sweden 2001
ABB Utilities AB (CELSA, Spain) Sweden 2001
Brandenburger Elektrostahlwerke GmbH Germany 2002 Henningsdorfer Elektrostahlwerke GmbH Germany 2002
Riva Acciaio S p A, Lesegno Italy 2002
Riva Acciaio S p A, Caronno Italy 2002
ABB Utilities AB (ACERALIA Olaberia, Spain) Sweden 2002 ABB Utilities AB (Global Steel Wire S.A, Spain) Sweden 2003
Simulations of AC, DC Arc Furnaces, SVC Systems and Flicker Meters (Continue)
OVAKO Smedjebacken AB Sweden 2005
SSAB Oxelösund AB (Team Met AB) Sweden 2005
Acierie de L’Atlantique S.A. France 2006
Phase Compensation, Harmonic Filters (Dimensioning, technical descriptions, technical specifications, inquiry documents, investment and profitability calculations)
AB Sandvik Steel Sweden 1989
Thy-Marcinelle S.A. Belgium 1990
A.L.PA France 1991
Danieli & C, SpA (Various projects) Italy 1991
Centro-Met AB (Various projects) Sweden 1991
Concast Standard AG Switzerland 1996
CELSA Spain 1998
Static Var Compensators (Dimensioning, technical specifications, inquiry documents, investments and profitability calculations, offer evaluations)
Danieli & C, SpA (Various projects) Italy 1992- Acciaierie Ferriere di Caronno SpA Italy 1993
Thy-Marcinelle S.A. Belgium 1993
Siderurgica Sevillana S.A. Spain 1993
Concast Standard AG Switzerland 1996
Brandenburger Elektrostahlwerke GmbH Germany 1999 Henningsdorfer Elektrostahlwerke GmbH Germany 1999
Riva Acciaio S p A, Lesegno Italy 1999
ILVA S p A Italy 1999
Riva Acciaio S p A, Lesegno Italy 2001
Iton-Seine S.A. France 2001
Brandenburger Elektrostahlwerke GmbH Germany 2002 Henningsdorfer Elektrostahlwerke GmbH Germany 2002
Scrap Pre-Heating Systems (Evaluation of and technical advising for improvement of efficiency for Scrap Pre-Heating System)
A.L.PA France 1988
Nervacero S.A. (Finger Shaft Furnace) Spain 1999
Scrap Pre-Heating Systems (Evaluation of the impact of different Scrap-Pre-Heating Systems on furnace operation, environment, production, production costs and investment benefit analysis)
Keystone Steel & Wire USA 1997
ILVA S p A Italy 1999
Fundia Bygg AS (Norsk Jernverk) Norway 1999
CELSA Spain 2000
Avesta Polarit AB, Avesta Sweden 2001
High Temperature Scrap Pre-Heating/Pre-Cleaning Systems with Post Combustion of Hydrocarbon, Chlorinated Aromatics and Dioxins
Fundia Bygg AS (Feasibility Study) Norway 1997 Keystone Steel & Wire (Feasibility Study) USA 1997
Riva Acciaio S p.A Italy 1999
CELSA Spain 2000
Riva Acciaio S p A, Verona Italy 2000
Riva Acciaio S p A, Lesegno Italy 2002
Riva Acciaio S p A, Caronno Italy 2002
OVAKO Steel AB Sweden 2003
MEFOS Sweden 2003
Impact of Oxy-Fuel Burners, Oxygen Lance Systems and Coherent Jet Burners on Production and Off-Gas Systems in Furnace Plants (Simulations of oxygen use in furnaces and the impact on specific consumption, production, off-gas system and bag house)
AGA AB Sweden 1999
Outokumpu Polarit Oy (AGA AB) Finland 1999
Nedstaal B.V. (AGA AB) Netherlands 2000
Siderurgica Sevillana S.A. Spain 2000
SAM, Neuves-Maisons France 2001
Global Steel Wire S.A. Spain 2001
Iton-Seine S.A. France 2001
Tremorfa Steelworks (CELSA UK) Wales 2003
CELSA Huta Poland 2003
OVAKO Smedjebacken AB Sweden 2005
Water Cooled Ducts and Pre Combustion Chamber for Arc Furnaces (Dimensioning and basic engineering)
Ravne via Fläkt Industri AB Jugoslavia 1990
Off-Gas Systems for Furnace Processes (Simulation of impacts of changed furnace operation on off-gas system (water cooled and self cooled ducts and bag house) with regards to off-gas flow, off-gas temperature and off-gas flow)
CELSA Spain 2000
Fundia Bygg AS Norway 2000
Nedstaal B.V. (AGA AB) Netherlands 2000
SAM, Neuves-Maisons France 2001
Global Steel Wire S.A. Spain 2001
Iton-Seine S.A. France 2001
OVAKO Steel AB Sweden 2003
Avesta Polarit, Avesta Sweden 2003
ICDAS CELIC A.S., Istanbul Turkey 2004
OVAKO Smedjebacken AB Sweden 2005
Off-Gas Systems for Furnace Processes (Basic engineering of ducts from canopy hood and furnace primary suction with dynamic simulations of melt shop ventilation)
OVAKO Steel AB Sweden 2005
Gas Cleaning for Arc Furnaces and Ladle Furnaces (Function descriptions, technical specifications, inquiry documents, guarantee specifications)
Acciaierie Ferriere del Tanaro SpA Italy 1988
Ovako Steel Profiler AB Sweden 1989
Water Cooled Duct System for a Wood Pelletizing Industry
(Dimensioning and basic engineering)
Infjärdens Värme AB (IVAB) Sweden 1997
Infjärdens Värme AB (IVAB) Sweden 2000
Optimisation of Refractory Linings in Combustion Chambers
Kvaerner Chemetics AB Sweden 1998
Measuring of Network Disturbances and Harmonics with Analysis of Recorded Results
ASSI Karlsborg AB (Pulp and Paper mill) Sweden 1989 SCA Nordliner AB (Kraftliner mill) Sweden 1989
Measuring of Short Circuit Impedances and Analysis in Arc Furnace Plants
Brandenburger Elektrostahlwerke GmbH Germany 1992 Henningsdorfer Elektrostahlwerke GmbH Germany 1992 Danieli & C, SpA (Various projects) Italy 1992
Thy-Marcinelle S.A. Belgium 1993
Iton-Seine S.A. France 1994
A.L.PA France 1994
Officine é Fonderie Galtarossa SpA Italy 1994 Acciaierie Ferriere del Tanaro SpA Italy 1994 Acciaierie Ferriere di Caronno SpA Italy 1994
Siderurgica Sevillana S.A. Spain 1994
Brandenburger Elektrostahlwerke GmbH Germany 1994 Henningsdorfer Elektrostahlwerke GmbH Germany 1994 Henningsdorfer Elektrostahlwerke GmbH Germany 1995
AB Sandvik Steel Sweden 1995
Ivaco Rolling Mills Canada 1995
Keystone Steel & Wire USA 1997
Birmingham Steel Corporation, Jackson USA 1998 (ABB Industrial Systems Inc.)
Birmingham Steel Corporation, Birmingham USA 1998 (ABB Industrial Systems Inc.)
Avesta Polarit AB, Avesta Sweden 2001
Development of Computer Programs and Calculation Methods Calculation of Impedance in Arc Furnaces and Ladle Furnaces
Centro-Met AB Sweden 1990
Danieli & C, SpA Italy 1990
Evaluation of Impedance Tests with Error Analysis for Arc Furnaces and Ladle Furnaces
Centro-Met AB Sweden 1990
Danieli & C, SpA Italy 1990
Load Parameters and Load Curves for Arc Furnaces and Ladle Furnaces
Centro-Met AB Sweden 1990
Danieli & C, SpA Italy 1990
Production and Production Costs for Arc Furnaces
Fläkt Industri AB Sweden 1990
Simulation of Scrap Preheating Systems
Fläkt Industri AB Sweden 1990
ABB Fläkt Industri AB Sweden 1993
Dynamic Simulation of Arc Furnaces (AC and DC), Static Var Compensators and Flicker Meters
Danieli & C, SpA Italy 1992
Centro-Met AB Sweden 1992
ABB Power System AB Sweden 1992
Dynamic Simulation of Melting Cycle in Arc Furnaces
HATCH Associates Consultants Inc. Canada, 1997 USA
MEFOS Sweden 1997
Avesta Sheffield AB, Degerfors Sweden 1997
Det Danske Stålvalsevaerk A/S (DDS) Denmark 1997
Fundia Special Bar AB Sweden 1997
Concast Standard AG Switzerland, 1997
Italy
Imatra Steel Oy Finland 1997
EraSteel Kloster AB Sweden 1997
AB Sandvik Steel Sweden 1997
Avesta Sheffield, Avesta Sweden 1997
AGA AB Sweden 1997
ALSTOM Power Italia S.p.A., Daneco Unit Italy 2000 Fundia Armeringsstål AS, Mo i Rana Norway 2001
Phase Compensation for Furnace Loads
Danieli/Centro-Met Sweden 1997
Harmonic Current and Voltage Distribution, Filter and SVC Components Ratings
Danieli/Centro-Met Sweden 1998
Dynamic Simulation of Off-Gas System in Arc Furnaces
ALSTOM Power Italia S.p.A., Daneco Unit Italy 2000
Sizing of Heat Exchangers (Excel)
Components
Air Cooled Scrap Bucket for High Temperature Scrap Preheating
ABB Fläkt Industri AB (For test in Avesta, Degerfors) Sweden 1992
Cooling Blocks "MEFLINE" in Safety Zone in Arc Furnaces
Acciaierie Ferriere di Caronno SpA Italy 1993
Cooling Blocks "MEFLINE" in Safety Zone in Arc Furnaces (Licence)
Iton-Seine S.A. France 1994
A.L.PA France 1994
Officine é Fonderie Galtarossa SpA Italy 1994 Acciaierie Ferriere del Tanaro SpA Italy 1994
Siderurgica Sevillana S.A. Spain 1994
Thy-Marcinelle S.A. Belgium 1995
Henningsdorfer Elektrostahlwerke GmbH Germany 1995 Brandenburger Elektrostahlwerke GmbH Germany 1995
Water Cooled Dampers for High Temperature Gases
Avesta Sheffield AB, Degerfors Sweden 1995
Low Heat Loss Water Cooled Panels ESSGEPAN
AB Sandvik Steel (Test panel) Sweden 1996
Fundia Special Bar AB (Test panel) Sweden 1996 Scana Björneborg AB (Test panels) Sweden 1998
Union Miniere S.A. Belgium 2001
Project Management