Light-Weight PaneLs
high quality panels
www.stenca.com
C O L D H e a t F i r e i N s u L a t i O N
a C O u s t i C s P r O j e C t i N g
a C C O m m O D a t i O N a D v i s i N g
WeLCOMe tO stenCa tRaDing
- global focus with local service
Stenca Trading offers optimal solutions for the offshore, marine, refineries and cogeneration industry.
Worldwide stenca trading provides professional assistance in insulation,
outfitting, accommodation and fire protection equipment for oil rigs, ships, onshore terminals and FPSOs.
Aalborg, Denmark is the headquarter of Stenca Trading, but our offices can also be found in Stavanger, Norway, and in Flensburg, Germany. Our agents are located in Vietnam, Singapore, Korea, Spain, Nigeria and China.
We are very aware of the developments in the offshore and marine industry, and we are contributing to development and innovation of new products in these areas.
We work closely with our partners and suppliers which ensures our customers a wide range of services regarding our heat, cold, sound insulation and fire protection equipment.
We strive to engage in long term relationships and having a large group of satisfied customers. Satisfied customers are our greatest asset - good and fast service is essential for us.
03 www.stenca.com
stenca Light-Weight Panel is a very exclusive and high quality hard core panel system. it is an innovative con-cept of ultra-light, non-combustible panel material for in-dustrial plants, refineries, shipbuilding and offshore use.
the panels offer a considerable weight saving over similar bulkheads, because it consists of a calcium silicate core with very low weight. Full comply with the requirements of Marine equipment Directive (MeD). Likewise, the pan-els are produced in accordance with the requirements of international conventions sOLas and with Resolution a754 (18) of international Maritime Organization (iMO). Can be used for several purposes like internal fire pro-tection and are ideal as ceiling- and wall panels, or they
can be used as fire blast walls indoors and outdoors. The panels have also noise reduction capabilities.
Light-Weight Panels are made of calcium silicate plates with different surfaces, which are pressed on a sandwich element. the core material has a density of only 290 kg/ m3, which is about half as much as comparable
non-com-bustible panel material.
the panels can be supplied with decorative surfaces, such as laminate, aluminium, stainless or galvanized steel etc., according to the thickness of the panel and the demanded characteristics.
stenCa Light-Weight PaneL
MATeriAl VeriFiCATiON
Type Thickness WeighT/m2 WeighT/m2 surface sTandard
incl. surface excl. surface incl. surface size/mm
B-15 t&g 22,0 mm 6 kg 9,28 kg Laminate 2400 x 600 a-60 t&g 53,4 mm 15 kg 26 kg steel 2400 x 580
C O L D H e a t F i r e i N s u L a t i O N
a C O u s t i C s P r O j e C t i N g
a C C O m m O D a t i O N a D v i s i N g
DATA OF STeNCA liGhT-WeiGhT PANelS
surfaces
B15 Panel is a very light fire protection panel for bulk-head. On each side there can be applied high pressure laminate (hPL) with thickness from 0,8 mm to 1,2 mm, which comply fully with the requirements of Marine equip-ment Directive (MeD).
A60 Panel is a very thin and light fire protection panel for bulkhead and deck. it is pre-bonded with steel on two sides with thickness from 0,6 mm to 0,8 mm.
On request the panels can also be processed to custom-er requirements, e.g. decorative hPL laminates, papcustom-er, glass tissue, veneers, plywood, steel sheets or aluminium sheets.
dimension
Other panel sizes can be made on customer request.
handling and storage
stored dry, shielded from sun, chill and water. During the handling and working process of the panels, particular
at-tention is required to the edges and to the corners of the single panel. the panel has to maintain in plain position, horizontal and well supported, to avoid flexion. Single panel must stand in straight position for avoiding struc-tural damages - also in the installation phase.
production of panels
the core consists of calcium silicate. the material is pro-duced of plates in different thicknesses at one produc-tion plant, and is afterwards send to the panel producproduc-tion plant. here the panels are being prepared for the gluing process. the surfaces are glued on the panels on a spe-cially gluing process system, which insures the surfaces and panel are fitted perfectly together, which makes the panels very strong.
Panel fixing and connection
installation of the panels has to be done on site. the pan-els have to be mounted in top and bottom profiles. Panpan-els with tong and groove (t&g) shall be glued together along the sides with an adhesive, to ensure a closely and fire safe jointing.
05 www.stenca.com
teChniCaL Data · Light-Weight PaneLs
specificaTion
thickness of core material mm B15: 20,4
mm a60: 52
Composition mm 0,6-1,2 + core + 0,6-1,2 standard Dimension mm B15: 2400 x 1200
mm a60: 2400 x 580 Weight core material kg/m3 290 ± 10 %
Bending resisTance uni en 310:1994
Bending Resistance ƒm(n/mm2) 17,5 (hPL 0,8 mm)
sound insulaTion uni en iso 717-1
airborne sound level Rw dB 24 (hPL 0,8 mm)
elasTic modulus uni en 310:1994
elastic Modulus em(n/mm2) 3780 (hPL 0,8 mm)
Thermal properTies en 12667 Thermal Conductivity W/(m*K) 0,0791 (hPl 0,8 mm) thermal Resistance (m2K)/W 0,292 (hPl 0,8 mm) dimensional Tolerances thickness mm ± 3 % Width mm :1000=±1 ; 1000+2000=±1,5 ; >2000=±2
C O L D H e a t F i r e i N s u L a t i O N
a C O u s t i C s P r O j e C t i N g
a C C O m m O D a t i O N a D v i s i N g
teChniCaL Data · Light-Weight PaneLs
compressiVe resisTance asTm 2559 d 905-98
Compression Rm (dan/cm2) 19,5 ± 10 %
core humidiTy conTenT
inside factory 1,5 ± 10 % (thickness core 19,6 mm)
WaTer aBsorpTion uni en 317:1994
swelling 0,1 % ( hPL 0,8 mm)
surface TracTion en 1607 / en 28510
traction Rm (dan/cm2) 2,2 – 3,90 (hPL 0,8 mm) Peeling F.Adh (N/mm) 0.020 – 0,030 (hPl 0,8 mm)
fire resisTance class
sOLas 74 as amended : Regulation ii-2/3.4
iMO reS. 61 (67) (FTP Code) iMO MSC/Cirs 1120 B-15 & A60
All products are certified in accordance with international regulations and iSO standards, like they are marked with wheel mark after iMO standards. the panels are likewise Ph neutral and comply with all environmental requirements.
