ISSUE DATE : MAY

(1)

www.andamiro.com

www.andamirousa.com

(2)

(3)

(4)

PRECAUTIONS FOR USE

The following safety precautions are given throughout this manual. They must be strictly followed to protect

those who install, use or maintain this product as well as to protect players, visitors and property.

For safty reasons.

• The following suggestions should be adhered to:

• The following graphic suggestions describe the types of precautions to be followed.

• Precautions to be followed:

C A U T I O N

Disregarding could result in injury or product damage.

W A R N I N G

Disregarding could result in serious injury.

Indicates a matter which must be performed.

Indicates a care should be taken.

Certain procedures require a qualified in-shop maintenance person or industry specialist. For such

instructions, a qualified person must take care of the jobs.

•Otherwise an electric shock, machine trouble, or a serious accident may result.

•Replacing the machine parts, inspecting and maintaining the machines, and troubleshooting must be assigned only

to a qualified in-shop maintenance person or industry specialist. This booklet gives instructions that hazardous jobs in

particular must be handled by an industry specialist. Qualified in-shop maintenance person and industry specialist are

defined as follows.

Qualified in-shop maintenance person

•A service staff shall have experience in operations of game machines. The staff shall be responsible for assembly,

installation, inspection and maintenance of the machine.

Industry specialist

•An industry specialist must be engaged in designing, manufacturing, inspecting and servicing amusement machines.

He or she must have an education in electrical, electronic and mechanical engineering, and routinely maintain and

repair amusement machines.

(5)

Be sure to consult an industry specialist when setting

up, moving or transporting this product.

•This product should not be set up, moved or transported

by any one other than an industry specialist.

•When installing this product, set the 4 leg levelers evenly

on the floor and make sure that the product is installed

stably in a horizontal position. Unstable installation may

result in injury or accident.

•When installing this product, do not apply undue force on

movable parts. Otherwise, injury and accident may result,

or the product may be damaged.

The machine for indoor usage only does not

install outside.

Do not set the game machine up near

emergency exits.

Protect the game machine from:

•Rain or moisture.

•Direct sunlight.

•Direct heat from air-conditioning and heating equipment,

etc..

• Hazardous flammable substances.

•Otherwise an accident or malfunction may result.

Do not place containers holding chemicals or

water on or near the game machine.

Do not place objects near the ventilating holes.

Do not bend the power cord by force or place

heavy objects on it.

Never plug or unplug the power cord with wet

hands.

Never unplug the game machine by pulling the

power cord.

Be sure to use indoor wiring within the specified

voltage requirements. For extension cord, use the

specified rating or more.

Be sure to use the attached power cord.

Never plug more than one cord at a time into

the electrical receptacle.

Do not lay the power cord where people

walk through.

Be sure to ground this product.

Do not exert excessive force when moving

the machine.

For proper ventilation, keep the game machine

100mm(4

″

″) away from the walls.

Do not alter the system related dipswitch settings.

W A R N I N G

C A U T I O N

(6)

PRECAUTIONS FOR USE

If there is any abnormality such as smoke,

bad smell or abnormal noise being emitted

from the machine, immediately turn OFF the

main power switch and unplug the power cord from

the receptacle to stop operating it.

•Using the machine in abnormal conditions could result

in fire or accidents.

Do not leave the power cord plugged in

improperly or covered with dust.

•Doing so could resu t the power cord

periodically.

C A U T I O N

W A R N I N G

Do not use this product anywhere other than

industrial areas.

•Using in a residential area or an area next to a

residential area could affect signal reception of radios,

television sets, telephones, etc..

•Do not give shock the surface of glass products.

Do not plug or unplug the power cord with wet

hands.

In handling the power cord, follow the

instructions below.

If the power cord or power plug becomes damaged,

stop using the machine immediately and ask your

nearest dealer to replace the parts.

1. Turn OFF the main power switch. 2. Unplug the power cord from the receptacle. 3 . Contact your nearest dealer.

In case of abnormality

•

Please do not play this game if

•

When you do drinking;

•

When your physical condition is not normal;

•

When you are in pregnancy;

•

When you have on a pulse controller;

•

When you have recently experienced a cramp or fainting away while watching TV.

•

Avoid excessive force/shock while playing/moving the game.

•

While do games, pay attention to surrounding.

•

Do not damage the power cord.

•

Do not bend the power cord excessively.

•

Do not heat the power cord.

•

Do not bind the power cord.

•

Do not sandwich the power cord.

•

Do not modify the power cord.

•

Do not twist the power cord.

•

Do not pull the power cord.

•

Do not stand on the power cord.

•

Do not drive a nail into the power cord.

(7)

C A U T I O N

W A R N I N G

Components in the game are sensitive to

vibrations and impact. Care should be used

when moving and transporting the game

machine.

Be sure not to let the machine tip over.

Before moving the machine, be sure to turn

OFF the main power switch, unplug the

power cord from the receptacle and remove

the power cord form the machine.

Before moving take the machine, off the levelers and

move it on the casters.

Avoid excessive force while moving the machine.

P R E C A U T I O N S

IN HANDLING

•When setting up, inspecting, maintaining, moving or

transporting this product, follow the procedures and

instructions set forth in this manual and perform such

work safely.

•Do not set up, handle, inspect, maintain, move or

transport this product under conditions equivalent to

the condition of "WARNING" or "CAUTION" specified

in this manual.

•If a new owner is to have this product as a result of

transfer, etc., be sure to give this manual to the new

owner.

Be sure to turn OFF the main power switch

and unplug the power cord from the

receptacle before inspecting or cleaning the

machine.

When replacing parts, be sure to use parts of

the correct specifications. Never use parts

other than the specified ones.

Opening inside the machine shall be done by

machine specialist only as high electric

current is being sent inside. For game machine with

monitor, a care should be taken while opening its

back door. If not, a damage to the inside parts or the

monitor may occur.

If the sub power switch of the service panel

is turned OFF without turning OFF the main

power switch of the power supply unit, some

parts in the units remain live. When opening the

back door, be sure to turn OFF the main power

switch and unplug the power cord from the

receptacle.

Strictly refrain from disassembly and repair

of parts which are not indicated in this

manual, as well as settings and remodeling.

To clean the game machine, wipe it with a soft cloth

dampened in a neutral detergent.

•Using thinner of other organic solvent or alcohol may

decompose the material.

•Electrical shock or equipment failure could be caused

by water entering the inside of the machine.

(8)

1. SPECIFICATION AND DIMENSIONS

780 [mm] (30.7 [inches])

1410 [mm] - 55.51 [inches]

1060 [mm] - 41.73 [inches]

POWER RATED VOLTAE RANGE

POWER RATED FREQUENCY RANGE

CONSUMPTION

WEGHT

AC 90 ~ 240 [V]

50 ~ 60 [Hz]

150 [Watts]

213 [Kg]

(10)

1. SPECIFICATION AND DIMENSIONS

1020 [mm] - 40.18 [inches]

780 [mm] 30.7 [inches] 1060 [mm] - 41.73 [inches]

POWER RATED VOLTAE RANGE

POWER RATED FREQUENCY RANGE

CONSUMPTION

WEGHT

AC 90 ~ 240 [V]

50 ~ 60 [Hz]

150 [Watts]

200 [Kg]

(11)

2. NAME OF PARTS

PRIZE OUT COUNTER

VOLUME SURVICE BUTTON POWER SWITCH S.M.P.S(5V/12V) S.M.P.S(24V) TRANSFORMER INPUT(EX.) OUTPUT 110V YELLOW 130 V 120 V 110 V 100 V 90 V 0 V 0 V 200 V 210 V 220 V 230 V 240 V 220V BLACK 110 V 220 V TEST BUTTON COIN COUNTER

TRANSFORMER

(12)

2. NAME OF PARTS

S.M.P.S(5V/12V) S.M.P.S(24V) INPUT(EX.) OUTPUT 110V YELLOW 130 V 120 V 110 V 100 V 90 V 0 V 0 V 200 V 210 V 220 V 230 V 240 V 220V BLACK 110 V 220 V PRIZE OUT COUNTER

VOLUME SURVICE BUTTON POWER SWITCH TEST BUTTON COIN COUNTER

TRANSFORMER

(13)

3. COMPONENTS

①

②

③

④

⑤

⑥

⑦

⑧

⑨

⑩

⑪

⑫

No.

NAMES

SPEC

Q’TY

REMARK

1

2

3

4

5

6

7

8

9

10

11

12

WRENCH WRENCH WRENCH WRENCH KEY KEY BOLT BOLT AC POWER CORD BALL MANUAL CAPSULE 4 [mm] 3 [mm] 2.5 [mm] 2 [mm] 1293 Ø85 1 1 1 1 2 2 2 8(16) 1 5 1 200

only capsule express (ticket express)

(14)

4. HOW TO ASSEMBLE

CAPSULE DISPENSER (4P-2EA) CONNECTION FND CONNECTOR (12P) CONNECTION ELECTRONIC BALLAST (3P) CONNECTION SPEAKER(2P) CONNECTION BOLTS SUPPLIED

(15)

4. HOW TO ASSEMBLE

ELECTRONIC BALLAST (3P) CONNECTION SPEAKER (2P) CONNECTION FND CONNECTOR (12P) CONNECTION BOLTS SUPPLIED REAR BILLBOARD ACRYL

(16)

5. TEST MODE AND ERROR NO.

No.

NAMES

REMARK

1

2

3

4

5

6

7

8

9

10

11 TEST MODE FINISHED

SOUND TEST

TRAIN MOTOR TEST

HURDLE 1,2,3 MOTOR TEST

CAPSULE DISPENSER TEST

AUTO TEST

HANDLE ENCODER TEST

SENSOR AND SWITCH TEST

COIN TEST

TRAIN MOTOR ENCODER TEST

HURDLE 3 MOTOR ENCODER TEST

(17)

5. TEST MODE AND ERROR NO.

PRESS “TEST BUTTON” TO DISPLAY 00

CONTROL HANDLE

TEST BUTTON

(18)

5. TEST MODE AND ERROR NO.

- Press “SERVICE BUTTON” to end “TEST MODE”

- Press “SERVICE BUTTON” to start “Sound Test”

- Use “CONTROL HANDLE” to test sound

- Press “SERVICE BUTTON” to end Sound Test

- Press “SERVICE BUTTON” to test Train

- Ball load onto the train when test mode runs

- Use “CONTROL HANDLE” to move train

- End Train test

- Press “SERVICE BUTTON” to test Obstacles

- Three Obstacles function when test mode runs

- Press “SERVICE BUTTON” to end Obstacles Test

- Press “SERVICE BUTTON” to start “Capsule Test”

- Each time Control Handle pressed, one capsule is given

- Press “SERVICE BUTTON” to end Capsule Test

- Press “SERVICE BUTTON” to RUN AUTO GAME Test

- Press “SERVICE BUTTON” to end AUTO GAME Test

- Press “SERVICE BUTTON” to start “Handle Encoder Test”

- Move “CONTROL HANDLE” to display Train Speed number (Encoder) on Credit FND

- Press “SERVICE BUTTON” to end Handle Encoder Test

TIME

CREDIT

(19)

5. TEST MODE AND ERROR NO.

- Press “SERVICE BUTTON” to start SENSOR & SWITCH Test

- When each SENSOR & SWITCH is sensed, Credit FND shows Number for each SENSOR

& SWITCH listed below

- When two or more SENSOR & SWITCH are sensed at the same time, lower NO. show on

the FND

- Press “SERVICE BUTTON” to end SENSOR & SWITCH Test

No.

NAMES

REMARK

01 TRAIN HOME SENSOR 02 TEST BUTTON 03 SERVICE BUTTON 04 COIN 1 SWITCH 05 COIN 2 SWITCH 06 BALL LOAD SENSOR 07 BALL OUT SENSOR 08 SUCCESS SENSOR

09 CAPSULE OUT CHECK SWITCH ONLY CAPSULE EXPRESS 10 1st HURDLE PASS SENSOR ONLY TICKET EXPRESS 11 2nd HURDLE PASS SENSOR ONLY TICKET EXPRESS 12 TICKET DISPENSER SENSOR ONLY TICKET EXPRESS 13 TICKET EMPTY SENSOR ONLY TICKET EXPRESS 14 HANDLE MAX SENSOR

15 HANDLE MIN SENSOR

CAPSULE EXPRESS

TICKET EXPRESS

15 15 14 12 13 5 4 3 2 14 2 8 11 8 6 1 7 10 6 1 7 9 3 4 5

(20)

5. TEST MODE AND ERROR NO.

- Press “SERVICE BUTTON” to start Encoder Test

- Move the train by using “CONTROL HANDLE” to display Train Speed(Encoder) on Credit FND

- Press “SERVICE BUTTON” to end Encoder Test

- Press “SERVICE BUTTON” to start Counter Test

- Each time Coin Sensor operates, coin counter increased by one

- Press “SERVICE BUTTON” to end Counter Test

- Press “SERVICE BUTTON” to start Ticket Test

- Each time Control Handle pressed, one ticket is given

- Press “SERVICE BUTTON” to end Ticket Test

TIME

CREDIT

ex.)

- Press “SERVICE BUTTON” to start Encoder Test

- Hurdle 3 functions when test mode runs. Hurlde 3 speed displays on Credit FND

- Press “SERVICE BUTTON” to end Encoder Test

TIME

CREDIT

(21)

5. TEST MODE AND ERROR NO.

No.

TIME FND

REMARK

1

2

3

4

5

6

7

8

9

10

11 TRAIN MOTOR OR

HOME SENSOR ERROR

BALL LOAD MOTOR OR

BALL LOAD SENSOR ERROR

TRAIN MOTOR OR

TRAIN ENCODER ERROR

HURDLE 3 MOTOR OR

HURDLE 3 ENCODER SENSOR ERROR

BALL OUT SENSOR ERROR

CAPSUEL DISPENSER MOTOR OR

CAPSULE DISPENSER SWITCH

ERROR (NO CAPSULE ERROR)

TRAIN MOTOR OVERLOAD

ELEVATOR MOTOR OVERLOAD

1st HURDLE MOTOR OVERLOAD

3rd HURDLE MOTOR OVERLOAD

TICKET DISPENSER SENSOR ERROR

(NO TICKET ERROR)

only capsule express

(22)

6. TROUBLESHOOTING

When the train cannot stop

at the starting point

Problem with sensor

Check the sensor by test mode

Check if the connector is coupled

to the sensor

The train malfuncions

Check if the connector is coupled

to the motor

Check if wires are connected

Check the bolts to make sure

the motor is secure. If they

are loose, tighten them by using

the tools supplied

MOTOR

Problem with motor

(23)

6. TROUBLESHOOTING

When balls are not dispensed

Check if balls are normally loaded into

the elevator

Check if wires to the motor are

properly connected

Check the blots to make sure the

motor is secure, and if

they are loose, tigenten them using

the tools supplied

Check if the motor is normal.

Refer to the assembly

drawing on 8-1-9.

Main plate(2) and 8-1-10.

Elevator for replacement

Problem with motor

When balls continue to

be dispensed

Problem with motor

Check the sensor by test mode

Check if the connector is coupled

to the sensor

MOTOR

(24)

6. TROUBLESHOOTING

Problem with motor

See if the train malfunctions

When hurdle NO.3 malfunctions

Problem with motor

Check the wire pin connected

to the motor

Check if bolts in the motor

are secure

Check the sensor. If faulty,

replace it with new one.

Refer to assembly drawing

on 8-1-5.Main plate(1) and

drawing on 8-1-8. Hurdle 3

for replacement

Repace the main board with new

one if hurdle NO.3 still

Problem with sensor

Check if the connector is

coupled to the sensor

MOTOR

SENSOR

MAIN SPROCKET

(25)

6. TROUBLESHOOTING

Problem with sensor

Check if the connector is coupled

to the sensor

Check the sensor by test mode

When hurdle NO.3 functions

Problem with sensor

Check the sensor.

Refer to the assembly drawing

on 8-1-8.

Hurdle 3 for replacement

Check if the connector is coupled to

the sensor

SENSOR

(26)

6. TROUBLESHOOTING

CONFIRM THE STATUS OF

MOTOR & MOTOR WIRE CONNECTION CONFIRM THE STATUS OF

SWITCH & SWITCH WIRE CONNECTION MICRO SWITCH

N.O G N.C

(27)

6. TROUBLESHOOTING

When the lamp is OFF

Check if there is a damaged ticket

inside the ticket dispenser

Check if the connector is couled to

the Ticket dispenser

When the lamp is ON

Check if there are tickets

in the ticket box.

(28)

7. DIP SWITCH MANUAL

DIP S/W 1

1

2

3

4 COIN

1 COIN 1 CREDIT OFF OFF OFF 2 COIN 1 CREDIT ON OFF OFF 3 COIN 1 CREDIT OFF ON OFF 4 COIN 1 CREDIT ON ON OFF 5 COIN 1 CREDIT OFF OFF ON 1 COIN 2 CREDIT ON OFF ON 1 COIN 3 CREDIT OFF ON ON FREE PLAY ON ON ON

COIN ACCUMULATION ON OFF COIN ACCUMULATION OFF ON

DIP S/W 2

1

2

3

4

5

6

7

8 GAME TIME

WHILE DEMO

TICKET EMPTY

MODE SELECT

2nd HURDLE

HORIZONTAL MOTOR

15 SEC OFF OFF 20 SEC ON OFF 25 SEC OFF ON 30 SEC ON ON DEMO SOUND ON OFF DEMO SOUND OFF ON 2nd HURDLE ON OFF 2nd HURDLE OFF ON

SOUND ON OFF

SOUND OFF ON

PRIZE MODE OFF

TICKET MODE ON

ON OFF

(29)

7. DIP SWITCH MANUAL

DIP S/W 3

1

2

3

4

5

6

7

8 A-MODE

PRIZE OUT

B-MODE

MODE SELECT

VENDING MACHINE

MODE

1 / 4 OFF OFF OFF OFF 1 / 5 ON OFF OFF OFF 1 / 6 OFF ON OFF OFF 1 / 7 ON ON OFF OFF 1 / 8 OFF OFF ON OFF 1 / 9 ON OFF ON OFF 1 / 10 OFF ON ON OFF 1 / 12 ON ON ON OFF 1 / 14 OFF OFF OFF ON 1 / 15 ON OFF OFF ON 1 / 16 OFF ON OFF ON 1 / 18 ON ON OFF ON 1 / 20 OFF OFF ON ON 1 / 25 ON OFF ON ON 1 / 30 OFF ON ON ON 1 / 35 ON ON ON ON

EASY OFF OFF

NORMAL ON OFF HARD OFF ON EXPERT ON ON A-MODE OFF B-MODE ON OFF OFF ON ON

(30)

7. DIP SWITCH MANUAL

DIP S/W 3

1

2

3

4

5

6

7

8 TICKET OUTPUT

FOR SUCCESS

TICKET OUTPUT

FOR 1st & 2nd

HURDLE PASS

TICKET OUTPUT

FOR REGARDLESS

SUCCESS OR

FAILURE

0 X LEFT TIME OFF OFF OFF 2 X LEFT TIME ON OFF OFF 4 X LEFT TIME OFF ON OFF 6 X LEFT TIME ON ON OFF 8 X LEFT TIME OFF OFF ON 10 X LEFT TIME ON OFF ON 12 X LEFT TIME OFF ON ON 14 X LEFT TIME ON ON ON

0 OFF OFF OFF

1 ON OFF OFF 2 OFF ON OFF 3 ON ON OFF 4 OFF OFF ON 5 ON OFF ON 7 OFF ON ON 10 ON ON ON 0 OFF OFF 1 ON OFF 3 OFF ON 5 ON ON

(31)

8. ASSEMBLY DRAWING AND PARTS LIST

1 1 1 2 1 1 1 1 2

No. NAME SPEC Q’TY CODE NO. No. NAME SPEC Q’TY CODE NO. 1 2 3 4 5 6 7 8 9 CABINET LOW

FRONT BILLBOARD FIXING BRACKET HANDLE COVER PLATE FRONT BILLBOARD ACRYL L/R COIN DOOR ASS’Y ELECTRONIC BALLAST AC POWER SWITCH PLATE AC POWER SWITCH SUPPORT COUNTER CAPSULE FL-20W-DK2221 AMMC-712 MCAP1WOO002 MCAP1MEP014 MCAP1MEP017 MCAP1ACR004 AZZZ0COD001 MCAP0MEP002 MCAP1MEP001 MCAP1MEP002 MZZZ0COU002 1 1 1 1 5 2 4 4 10 11 12 13 14 15 16 17 18 VOLUME

PUSH BUTTON SWITCH

ROCKER SWITCH

ITH(ROUND HEAD WRENCH TYPE) 1TH

ROUND HEAD WRENCH BOLT SEMS BA25Y-10KΩ 412R 412W T-125 4P M4×12Ni Plated M4×12 M4×12Ni Plated M4×10 MELE0VOL008 MELE0PUS001 MELE0PUS002 MELE0SWI004 1 2 3 6 4 9 10 11 12 13 5 7 8 15 16 14 17

(32)

8. ASSEMBLY DRAWING AND PARTS LIST

1 2 1 1 1

No. NAME SPEC Q’TY CODE NO. No. NAME SPEC Q’TY CODE NO. 1 2 3 4 5 LAMP(FRUORESCENT) LAMP CLAMP LAMP BRACKET LAMP COVER ACRYL TRANSFOMER FL20SD-20W 300W MELE0LAM002 MWET0PRO007 MCAP0MEP071 MCAP0ACR005 MELE0TRF016 1 1 1 2 12 9 10 11 12 13 WORKING MDF NOISE FILTER NOISE FILTER BRACKET SEMS SEMS 1P-0642-H2 M4×10 M4×30 MCAP0WOO004 MELE0NOI002 MCAP0MEP075 2 3 4 2 1 3 4 10 16 13 11 12 13 13 14 15 5 6 7 8 9

(33)

8. ASSEMBLY DRAWING AND PARTS LIST

1 1 1 1 1 1 1 1

No. NAME SPEC Q’TY CODE NO. No. NAME SPEC Q’TY CODE NO. 1 2 3 4 5 6 7 8

MAIN PLATE SUPPORT SHAFT-A MAIN PLATE SUPPORT SHAFT-B MAIN PLATE SUPPORT SHAFT-C MAIN PLATE SHAFT BRACLET-A MAIN PLATE SHAFT BRACLET-B HURDLE 2 ASS’Y BEARING HURDLE 2 ROATE RW-26 MCAP0PRO049 MCAP0PRO050 MCAP0PRO051 MCAP0MEP076 MCAP0MEP077 ACAP1PRO004 MZZZ0BEA031 MCAP0PRO009 1 1 12 3 3 4 2 4 9 10 11 12 13 14 15 16

HUDLE 2 MOTOR BRACKET -B MOTOR 1TH WRENCH BOLT WRENCH BOLT SEMS WRENCH BOLT SEMS KGE-116-3448A M4×12 M8×20 M4×30 M4×20 M4×12 M4×8 MCAP0MEP046 MWET0MOT002 1 2 3 4 5 13 14 15 16 10 11 12 6 7 8 9

(34)

8. ASSEMBLY DRAWING AND PARTS LIST

2 4 4 4 1 4 2 2

HURDLE 2 LM SHAFT BRACKET HURDLE 2 RETURN SPRING HURDLE 2 LM SHAFT HURDLE 2 RETURN SPRING SPACER HURDLE 2 FRONT BRACKET HURDLE 2 CUSHION HURDLE 2 LM BEARING HOUSING ASS’Y ROLLER BEARING UNIT ASS’Y

MCAP0MEP083 MCAP0SPR002 MCAP0PRO007 MCAP0PRO041 MCAP0MEP082 MCAP0PRO008 ACAP1PRO014 ARES0PRO027 1 1 2 2 1 24 4 4 12 13 14 15 16 17 18 19

HURDLE 2 MOTOR BRACKET-A MOTOR

LINEAR

HURDLE 2 LINEAR BRACKET HURDLE 2 BASE SEMS WRENCH BOLT SEMS KGE-116-3448A TS-270-200 M4×10 M4×12 M5×20 MCAP1MEP045 MWET0MOT002 MCAP0PRO011 MCAP1MEP043 MCAP1MEP041 1 2 17 3 4 5 1 6 7 17 22 16 15 21 14 13 11 17 10 18 9 8 12 17 20 19

(35)

8. ASSEMBLY DRAWING AND PARTS LIST

1 4 3 14 1 1 1 1 1

No. NAME SPEC Q’TY CODE NO. No. NAME SPEC Q’TY CODE NO. 1 2 3 4 5 6 7 8 9

MAIN CHAIN ASS’Y CHAIN ROLLER ASS’Y SPROCKET ASS’Y MAIN SPACE SHAFT SENSOR GUDIE BRACKET SENSOR PCB ASS’Y HURDLE 3 ASS’Y MAIN SPACE BRACKET MAIN MOTOR ASS’Y

RS35-170 ACAP0PRO019 ACAP0PRO018 ACAP0PRO016 MCAP0PRO016 MCAP0MEP026 AWET0PCB005 ACAP1PRO005 MCAP0MEP078 ACAP1PRO002 1 1 14 4 2 8 8 8 18 10 11 12 13 14 15 16 17 18 MAIN PLATE HURDLE 1 ASS’Y FLANGE NUT SEMS SEMS PLATE WASHER SPRING WASHER WRENCH BOLT SEMS M5 M4×10 M3×10 M5 M5 M5×20 M5×20 MCAP1MEP020 ACAP0PRO003 1 ₈ 9 18 10 13 11 15 16 17 2 3 4 5 6 7 12 13 14 15 16 17 18

(36)

8. ASSEMBLY DRAWING AND PARTS LIST

1 1 1 1 1

No. NAME SPEC Q’TY CODE NO. No. NAME SPEC Q’TY CODE NO. 1

2 3 4 5

MAIN SPROCKET ASS’Y ENCODER

MAIN SPROCKET ENCODER SHAFT MAIN SPROCKET COUPLING BEARING HOUSING BRACKET

ACAP0PRO001 MCAP0MEP035 MCAP0PRO003 MCAP0PRO002 MCAP0MEP034 1 1 6 2 4 9 10 11 12 13

MAIN SPROCKET SENSOR BRACKET ENCODER PCB2 ASS’Y SEMS SET SCREW WRENCH BOLT M3×6 M4×6 M4×12 MCAP1MEP037 AWET2PCB006 1 11 13 14 15 13 2 3 4 5 6 7 8 12 9 10 11 16

(37)

8. ASSEMBLY DRAWING AND PARTS LIST

1 1 1 1 1 1 1

No. NAME SPEC Q’TY CODE NO. No. NAME SPEC Q’TY CODE NO. 1 2 3 4 5 6 7

HURDLE 1 COVER BRACKET HURDLE 1 SHAFT-B ASS’Y HURDLE 1 SHAFT-A ASS’Y HURDLE COUPLING TIMMING BELT

HURDLE 1 BEARING HOUSING BRACKET HURDLE 1 MOTOR BRACKET

120XL9.5T MCAP0MEP039 ACAP0PRO012 ACAP0PRO011 MCAP0PRO004 MWET0BEL001 MCAP0MEP038 MCAP0MEP040 1 6 4 4 4 4 8 9 10 11 12 13 14 MOTOR

FLAT HEAD CAP SCREW WRENCH BOLT SEMS

FLAT HEAD CAP SCREW SEMS KGE-050-3448A M3×10 M4×12 M5×20 M4×10 M4×8 MWET0MOT005 1 9 10 10 12 13 11 2 3 4 5 6 7 8

(38)

8. ASSEMBLY DRAWING AND PARTS LIST

1 1 1 1 1 4 2 5

HURDLE 3 COVER BRACKET-L HURDLE 3 COVER BRACKET-R HURDLE 3 COVER SUPPORT-L HURDLE 3 COVER SUPPORT-R HURDLE 3 RAIL BRACKET HURDLE 3 SHAFT

HURDLE 3 BEARING BRACKET SPACER

BEARING RW-26 MCAP0MEP048 MCAP0MEP049 MCAP0MEP050 MCAP1MEP051 MCAP0MEP054 MCAP0PRO006 MCAP0PRO042 MZZZ0BEA031 1 1 1 1 8 8 16 2 12 13 14 15 16 17 18 19

HURDLE 3 ENCODER SENSOR BRACKET ENCODER PCB2 ASS’Y HURDLE 3 MOTOR BRACKET MOTOR

FLAT HEAD CAP SCREW FLAT HEAD CAP SCREW SEMS SET SCREW KGE-050-3448A M3×10 M4×10 M4×10 M4×6 MCAP0MEP052 AWET2PCB006 MCAP0MEP053 MWET0MOT005 16 1 2 3 4 5 17 18 10 11 12 13 14 15 18 6 7 8 19 20 20 21 18 18 9 8

(39)

8. ASSEMBLY DRAWING AND PARTS LIST

1 1 1 1

2 3 4

BALL LOADING COVER ELEVATOR ASS’Y BALL GUIDE BRACKET-A BALL GUIDE BRACKET-B

MCAP0MEP006 MCAP0MEP049 MCAP1MEP003 MCAP1MEP005 1 8 13 2 5 6 7 8 PHOTO SENSOR SEMS SEMS SEMS SB-32SA-05 M5×20 M4×10 M3×10 MELE0PHO011 1 2 3 4 5 8 6 7 7 7 6

(40)

8. ASSEMBLY DRAWING AND PARTS LIST

2 2 1

2 3

ELEVATOR TENSION SPRING ELEVATOR BRACKET ELEVATOR SPROCKET-A ASS’Y

MWET0SPR001 MCAP0MEP056 ACAP0PRO015 3 1 2 7 8 9

BALL LOADING BRACKET ELEVATOR CHAIN WRENCH BOLT RS35-76 M5×50 MCAP1MEP055 MELE0PHO011 1 2 3 4 5 6 7 8 10 11 9 10 12

(41)

8. ASSEMBLY DRAWING AND PARTS LIST

1 1 1 1 1 1 1 1 1

No. NAME SPEC Q’TY CODE NO. No. NAME SPEC Q’TY CODE NO. 1 2 3 4 5 6 7 8 9 RAIL BASE-A RAIL BASE-B RAIL BASE-C RAIL BASE-D MAIN PLATE COVER HURDLE 3 COVER BRACKET-L HURDLE 3 COVER BRACKET-R HURDLE 3 COVER BLOCK HURDLE 1 COVER SHAFT

MCAP1MEP022 MCAP1MEP023 MCAP0MEP024 MCAP0MEP025 MCAP1MEP019 MCAP0MEP048 MCAP0MEP049 MCAP0PRO045 MCAP0PRO044 1 1 1 1 1 11 24 2 6 10 11 12 13 14 15 16 17 18 OBSTRUCT

CENTER SENSOR BRACKET PHOTO SENSOR HANDLE ASS’Y OBSTRUCT-B SEMS

FLAT HEAD CAP SCREW SEMS

FLAT HEAD CAP SCREW

SB-32SA-05 M4×10 M3×10 M3×10 M4×25 MCAP0MEP021 MCAP1MEP007 MELE0PHO011 ACAP1PRO007 MCAP0MEP079 1 8 6 10 15 7 3 17 11 11 12 15 18 13 14 14 16 15 2 15 15 5 9 4

(42)

8. ASSEMBLY DRAWING AND PARTS LIST

1 1 4 1 1 1 2 2 2 2 2 1

No. NAME SPEC Q’TY CODE NO. No. NAME SPEC Q’TY CODE NO. 1 2 3 4 5 6 7 8 9 10 11 12 HANDLE

HANDLE COVER BLOCK-L HANDLE CUSHION HANDLE RETURN SPRING GEAR-50

GEAR-20

HANDLE ENCODER SHAFT BUSHING HANDLE SIDE BRACKET HANDLE SHAFT BUSHING HANDLE CHECK SHAFT HANDLE CHECK SHAFT SPRING HANDLE CHECK SHAFT BLOCK

MCAP0PRO025 MCAP0PRO019 MCAP1PRO021 MCAP0SPR004 MPOC0PLA002 MPOC0PLA001 MCAP0PRO022 MCAP0MEP069 MCAP0PRO026 MCAP0PRO018 MCAP0SPR003 MCAP0PRO017 1 1 1 1 1 1 3 8 1 27 8 4 17 18 19 20 21 22 23 24 25 26 27 28

HURDLE COVER BLOCK-R HANDLE ENCODER SHAFT HANDLE ENCODER ENCODER PCB2 ASS’Y

HANDLE ENCODER SENSOR BRACKET HANDLE COVER ACRYL WRENCH BOLT WRENCH BOLT WRENCH BOLT SEMS SEMS

FLAT HEAD CAP SCRREW

M4×30 M3×6 M5×20 M4×12 M3×6 M4×10 MCAP0PRO020 MCAP0PRO023 MCAP0MEP067 AWET2PCB006 MCAP0MEP066 MCAP0ACR007 1 2 3 4 5 6 7 30 10 11 12 13 27 28 14 15 26 26 8 9 22 16 17 23 24 26 31 25 31 29 32 30 18 19 26 27 20 21

(43)

8. ASSEMBLY DRAWING AND PARTS LIST

1 1 1 1 1 1 1 1 1 1 1 1 2 1

No. NAME SPEC Q’TY CODE NO. No. NAME SPEC Q’TY CODE NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14

ELEVATOR COVER TOP ELEVATOR COVER MAIN PHOTO SENSOR

SUCCESS SENSOR BRACKET ELEVATOR BRACKET GUIDE

ELEVATOR BRACKET FRONT TRAIN HEAD

TRAIN JOIN SPRING GOODS WAGON TRAIN BASE HANDLE COVER

HANDLE COVER SUPPORT-B HANDLE COVER SUPPORT HURDLE 3 ACRYL-L SB-32SA-05 MCAP0MEP011 MCAP0MEP010 MELE0PHO011 MCAP0MEP026 MCAP1MEP009 MCAP0MEP008 MWET0PLA003 MWET0SPR003 MWET0PLA005 MWET0PLA002 MCAP0ACR011 MCAP0MEP085 MCAP1MEP018 MCAP1ACR001 1 2 6 4 14 1 1 4 6 2 2 2 1 15 16 17 18 19 20 21 22 23 24 25 26 27 28 HURDLE 3 ACRYL-R TONADO SEMS

FLAT HEAD CAP SCREW PH

1TH(ROUND HEAD WRENCH TYPE) SEMS

FLAT HEAD CAP SCREW PH WRENCH BOLT PH M3×10 M3×10 M4×12 M4×16 M4×20 M4×12-Ni Plated M4×20 M4×20 M4×25 M4×30 M3×30 MCAP1ACR002 MWET0SPR004 1 2 3 4 5 6 8 9 7 19 27 20 21 10 11 22 24 12 23 13 17 18 17 19 25 14 19 15 26 16

(44)

8. ASSEMBLY DRAWING AND PARTS LIST

1 1

2

CABINET UP

BILLBOARD FIXING BRACKET

CAPSULE MCAP1WOO001 MCAP1MEP070 2 21 6 7 SPEAKER

ROUND HEAD WRENCH BOLT

4.5 inch M4×30-Ni Plated

MZZZ0SPE004

(45)

8. ASSEMBLY DRAWING AND PARTS LIST

1 2 1 1

2 3 4

LAMP COVER ACRYL-B LAMP CLAMP LAMP ELECTRONIC BALLAST FL20SD-20W FL20W-DK2221 MCAP0ACR006 MWET0PRO007 MELE0LAM002 MELE0BAL001 1 10 6 5 6 7 8

CAPSULE DISPENSER ASS'Y 1TH

FLAT HEAD CAP SCREW

M4×12 M4×20 ACAP1PRO008 1 6 5 7 2 3 6 6 4

(46)

8. ASSEMBLY DRAWING AND PARTS LIST

1 1 1 1 4 1 2 2

No. NAME SPEC Q’TY CODE NO. No. NAME SPEC Q’TY CODE NO. 1 2 3 4 5 6 7 8 MIX SHAFT

CAPSULE BLOCK SPRING BRACKET BLOCK SPRING

CAPSULE ROTATE UP SPACE SHAFT CAPSULE ROTATE LOW CAPSULE GUIDE BRACKET-R CAPSULE GUIDE BRACKET-L

MHAM0PRO001 MCAP0MEP057 MMAL0SPR001 MCAP1MEP063 MCAP0PRO043 MCAP1MEP061 MCAP0MEP059 MCAP0MEP058 1 1 1 1 1 22 22 2 12 13 14 15 16 17 18 19

CAPSULE MAIN BRACKET MICRO SWITCH

CAPSULE SWITCH BRACKET MOTOR

WRENCH BOLT FLAT HEAD CAP SCREW SEMS WRENCH BOLT CNR-05H-03 KGE-615-3448D M5×20 M4×10 M4×10 M4×10 MCAP0MEP060 MELE0MIC002 MCAP0MEP064 MELE0MIC002 3 1 2 4 5 6 7 8 19 17 12 18 21 13 14 17 16 18 9 18 17 10 11 20 18 15

(47)

8. ASSEMBLY DRAWING AND PARTS LIST

1 1 1 2 1 1 1 1 1

No. NAME SPEC Q’TY CODE NO. No. NAME SPEC Q’TY CODE NO. 1 2 3 4 5 6 7 8 9 CABINET LOW

FRONT COVER FIXING BRACKET HANDLE COVER PLATE FRONT COVER PLATE TICKET DOOR ASS'Y TICKET DISPENSER COIN DOOR ASS’Y ELECTRONIC BALLAST AC POWER SWITCH PLATE

TICKET DL-1275 FL-20W-DK2221 MCAP0WOO006 MCAP0MEP089 MCAP0MEP091 MCAP0MEP090 AHAM0PRE001 MMAL0TID001 AZZZ0COD001 MELE0BAL001 MCAP1MEP001 1 2 1 1 1 1 6 14 4 10 11 12 13 14 15 16 17 18

AC POWER SWITCH SUPPORT COUNTER

VOLUME

PUSH BUTTON SWITCH

ROCKER SWITCH

1TH(ROUND HEAD WRENCH TYPE) 1TH SEMS AMMC-712 BA25Y-10KΩ 412R 412W T-125 4P M4×12-Ni Plated M4×12 M4×10 MCAP1MEP002 MZZZ0COU002 MELE0VOL008 MELE0PUS001 MELE0PUS002 MELE0SWI004 2 1 6 16 17 4 5 7 3 8 17 9 10 18 11 12 13 1514

(48)

8. ASSEMBLY DRAWING AND PARTS LIST

1 2 1 1 1 1 1

No. NAME SPEC Q’TY CODE NO. No. NAME SPEC Q’TY CODE NO. 1 2 3 4 5 6 7 LAMP(FRUORESCENT) LAMP CLAMP LAMP BRACKET LAMP COVER ACRYL TRANSFOMER TERMINAL BLOCK POWER-SMPS FL20SD-20W 300W 10P MSF80-24 MELE0LAM002 MWET0PRO007 MCAP0MEP071 MCAP0ACR005 MELE0TRF016 MELE0TEB003 MELE0SMP009 1 1 1 2 12 2 14 11 12 13 14 15 16 17

BALL CHECK SENSOR BRACKET-B NOISE FILTER

NOISE FILTER BRACKET SEMS SEMS 1TH 1TH IP-0642-H2 M4×10 M4×30 M4×30 M4×12 MCAP0MEP087 MELE0NOI002 MCAP0MEP075 2 3 4 1 14 15 15 19 20 10 11 16 17 5 6 7 8 9 18 15 13 12

(49)

8. ASSEMBLY DRAWING AND PARTS LIST

1 1 1 1 1 1 1 1

MAIN PLATE SUPPORT SHAFT-A MAIN PLATE SUPPORT SHAFT-B MAIN PLATE SUPPORT SHAFT-C MAIN PLATE SHAFT BRACLET-A MAIN PLATE SHAFT BRACLET-B HURDLE 2 ASS’Y BEARING HURDLE 2 ROATE RW-26 MCAP0PRO049 MCAP0PRO050 MCAP0PRO051 MCAP0MEP076 MCAP0MEP077 ACAP1PRO004 MZZZ0BEA031 MCAP0PRO009 1 1 12 3 3 4 2 4 9 10 11 12 13 14 15 16

HUDLE 2 MOTOR BRACKET -B MOTOR 1TH WRENCH BOLT WRENCH BOLT SEMS WRENCH BOLT SEMS KGE-116-3448A M4×12 M8×20 M4×30 M4×20 M4×12 M4×8 MCAP0MEP046 MWET0MOT002 1 2 3 4 5 13 14 15 16 10 11 12 6 7 8 9

(50)

8. ASSEMBLY DRAWING AND PARTS LIST

2 4 4 4 1 4 2 2

HURDLE 2 LM SHAFT BRACKET HURDLE 2 RETURN SPRING HURDLE 2 LM SHAFT HURDLE 2 RETURN SPRING SPACER HURDLE 2 FRONT BRACKET HURDLE 2 CUSHION HURDLE 2 LM BEARING HOUSING ASS’Y ROLLER BEARING UNIT ASS’Y

MCAP0MEP083 MCAP0SPR002 MCAP0PRO007 MCAP0PRO041 MCAP0MEP082 MCAP0PRO008 ACAP1PRO014 ARES0PRO027 1 1 2 2 1 24 4 4 12 13 14 15 16 17 18 19

HURDLE 2 MOTOR BRACKET-A MOTOR

LINEAR

HURDLE 2 LINEAR BRACKET HURDLE 2 BASE SEMS WRENCH BOLT SEMS KGE-116-3448A TS-270-200 M4×10 M4×12 M5×20 MCAP1MEP045 MWET0MOT002 MCAP0PRO011 MCAP1MEP043 MCAP1MEP041 1 2 17 3 4 5 1 6 7 17 22 16 15 21 14 13 11 17 10 18 9 8 12 17 20 19

(51)

8. ASSEMBLY DRAWING AND PARTS LIST

1 4 3 14 1 1 1 1 1

No. NAME SPEC Q’TY CODE NO. No. NAME SPEC Q’TY CODE NO. 1 2 3 4 5 6 7 8 9

MAIN CHAIN ASS’Y CHAIN ROLLER ASS’Y SPROCKET ASS’Y MAIN SPACE SHAFT SENSOR GUDIE BRACKET SENSOR PCB ASS’Y HURDLE 3 ASS’Y MAIN SPACE BRACKET MAIN MOTOR ASS’Y

RS35-170 ACAP0PRO019 ACAP0PRO018 ACAP0PRO016 MCAP0PRO016 MCAP0MEP026 AWET0PCB005 ACAP1PRO005 MCAP0MEP078 ACAP1PRO002 1 1 14 4 2 8 8 8 18 10 11 12 13 14 15 16 17 18 MAIN PLATE HURDLE 1 ASS’Y FLANGE NUT SEMS SEMS PLATE WASHER SPRING WASHER WRENCH BOLT SEMS M5 M4×10 M3×10 M5 M5 M5×20 M5×20 MCAP1MEP020 ACAP0PRO003 1 ₈ 9 18 10 13 11 15 16 17 2 3 4 5 6 7 12 13 14 15 16 17 18

(52)

8. ASSEMBLY DRAWING AND PARTS LIST

1 1 1 1 1

2 3 4 5

MAIN SPROCKET ASS’Y ENCODER

MAIN SPROCKET ENCODER SHAFT MAIN SPROCKET COUPLING BEARING HOUSING BRACKET

ACAP0PRO001 MCAP0MEP035 MCAP0PRO003 MCAP0PRO002 MCAP0MEP034 1 1 6 2 4 9 10 11 12 13

MAIN SPROCKET SENSOR BRACKET ENCODER PCB2 ASS’Y SEMS SET SCREW WRENCH BOLT M3×6 M4×6 M4×12 MCAP1MEP037 AWET2PCB006 1 11 13 14 15 13 2 3 4 5 6 7 8 12 9 10 11 16

(53)

8. ASSEMBLY DRAWING AND PARTS LIST

1 1 1 1 1 1 1

No. NAME SPEC Q’TY CODE NO. No. NAME SPEC Q’TY CODE NO. 1 2 3 4 5 6 7

HURDLE 1 COVER BRACKET HURDLE 1 SHAFT-B ASS’Y HURDLE 1 SHAFT-A ASS’Y HURDLE COUPLING TIMMING BELT

HURDLE 1 BEARING HOUSING BRACKET HURDLE 1 MOTOR BRACKET

120XL9.5T MCAP0MEP039 ACAP0PRO012 ACAP0PRO011 MCAP0PRO004 MWET0BEL001 MCAP0MEP038 MCAP0MEP040 1 6 4 4 4 4 8 9 10 11 12 13 14 MOTOR

FLAT HEAD CAP SCREW WRENCH BOLT SEMS

FLAT HEAD CAP SCREW SEMS KGE-050-3448A M3×10 M4×12 M5×20 M4×10 M4×8 MWET0MOT005 1 9 10 10 12 13 11 2 3 4 5 6 7 8

(54)

8. ASSEMBLY DRAWING AND PARTS LIST

1 1 1 1 1 4 2 5

HURDLE 3 COVER BRACKET-L HURDLE 3 COVER BRACKET-R HURDLE 3 COVER SUPPORT-L HURDLE 3 COVER SUPPORT-R HURDLE 3 RAIL BRACKET HURDLE 3 SHAFT

HURDLE 3 BEARING BRACKET SPACER

BEARING RW-26 MCAP0MEP048 MCAP0MEP049 MCAP0MEP050 MCAP1MEP051 MCAP0MEP054 MCAP0PRO006 MCAP0PRO042 MZZZ0BEA031 1 1 1 1 8 8 16 2 12 13 14 15 16 17 18 19

HURDLE 3 ENCODER SENSOR BRACKET ENCODER PCB2 ASS’Y HURDLE 3 MOTOR BRACKET MOTOR

FLAT HEAD CAP SCREW FLAT HEAD CAP SCREW SEMS SET SCREW KGE-050-3448A M3×10 M4×10 M4×10 M4×6 MCAP0MEP052 AWET2PCB006 MCAP0MEP053 MWET0MOT005 16 1 2 3 4 5 17 18 10 11 12 13 14 15 18 6 7 8 19 20 20 21 18 18 9 8

(55)

8. ASSEMBLY DRAWING AND PARTS LIST

1 1 1 1

2 3 4

BALL LOADING COVER ELEVATOR ASS’Y BALL GUIDE BRACKET-A BALL GUIDE BRACKET-B

MCAP0MEP006 MCAP0MEP049 MCAP1MEP003 MCAP1MEP005 1 8 13 2 5 6 7 8 PHOTO SENSOR SEMS SEMS SEMS SB-32SA-05 M5×20 M4×10 M3×10 MELE0PHO011 1 2 3 4 5 8 6 7 7 7 6

(56)

8. ASSEMBLY DRAWING AND PARTS LIST

2 2 1

2 3

ELEVATOR TENSION SPRING ELEVATOR BRACKET ELEVATOR SPROCKET-A ASS’Y

MWET0SPR001 MCAP0MEP056 ACAP0PRO015 3 1 2 7 8 9

BALL LOADING BRACKET ELEVATOR CHAIN WRENCH BOLT RS35-76 M5×50 MCAP1MEP055 MELE0PHO011 1 2 3 4 5 6 7 8 10 11 9 10 12

(57)

8. ASSEMBLY DRAWING AND PARTS LIST

1 1 1 1 1 1 1 1 1 1

No. NAME SPEC Q’TY CODE NO. No. NAME SPEC Q’TY CODE NO. 1 2 3 4 5 6 7 8 9 10 RAIL BASE-A RAIL BASE-B RAIL BASE-C RAIL BASE-D MAIN PLATE COVER HURDLE 3 COVER BRACKET-L HURDLE 3 COVER BRACKET-R HURDLE 3 COVER BLOCK HURDLE 1 COVER SHAFT OBSTRUCT MCAP1MEP022 MCAP1MEP023 MCAP0MEP024 MCAP0MEP025 MCAP1MEP019 MCAP0MEP048 MCAP0MEP049 MCAP0PRO045 MCAP0PRO044 MCAP0MEP021 1 2 1 1 1 13 24 4 6 11 12 13 14 15 16 17 18 19 20

CENTER SENSOR BRACKET PHOTO SENSOR HANDLE ASS’Y OBSTRUCT-B

BALL CHECK SENSOR BRACKET-A SEMS

FLAT HEAD CAP SCREW

SB-32SA-05 M4×10 M3×10 M3×10 M4×25 MCAP1MEP007 MELE0PHO011 ACAP1PRO007 MCAP0MEP079 MCAP0MEP004 1 8 6 10 16 7 3 18 11 11 12 16 19 13 14 18 12 15 14 17 16 2 16 16 5 9 4

(58)

8. ASSEMBLY DRAWING AND PARTS LIST

1 1 4 1 1 1 2 2 2 2 2 1

No. NAME SPEC Q’TY CODE NO. No. NAME SPEC Q’TY CODE NO. 1 2 3 4 5 6 7 8 9 10 11 12 HANDLE

HANDLE COVER BLOCK-L HANDLE CUSHION HANDLE RETURN SPRING GEAR-50

GEAR-20

HANDLE ENCODER SHAFT BUSHING HANDLE SIDE BRACKET HANDLE SHAFT BUSHING HANDLE CHECK SHAFT HANDLE CHECK SHAFT SPRING HANDLE CHECK SHAFT BLOCK

MCAP0PRO025 MCAP0PRO019 MCAP1PRO021 MCAP0SPR004 MPOC0PLA002 MPOC0PLA001 MCAP0PRO022 MCAP0MEP069 MCAP0PRO026 MCAP0PRO018 MCAP0SPR003 MCAP0PRO017 1 1 1 1 1 1 3 8 1 27 8 4 17 18 19 20 21 22 23 24 25 26 27 28

HURDLE COVER BLOCK-R HANDLE ENCODER SHAFT HANDLE ENCODER ENCODER PCB2 ASS’Y

HANDLE ENCODER SENSOR BRACKET HANDLE COVER ACRYL WRENCH BOLT WRENCH BOLT WRENCH BOLT SEMS SEMS

FLAT HEAD CAP SCRREW

M4×30 M3×6 M5×20 M4×12 M3×6 M4×10 MCAP0PRO020 MCAP0PRO023 MCAP0MEP067 AWET2PCB006 MCAP0MEP066 MCAP0ACR007 1 2 3 4 5 6 7 30 10 11 12 13 27 28 14 15 26 26 8 9 22 16 17 23 24 26 31 25 31 29 32 30 18 19 26 27 20 21

(59)

8. ASSEMBLY DRAWING AND PARTS LIST

1 1 1 1 1 1 1 1 1 1 1 1 2 1

No. NAME SPEC Q’TY CODE NO. No. NAME SPEC Q’TY CODE NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14

ELEVATOR COVER TOP ELEVATOR COVER MAIN PHOTO SENSOR

SUCCESS SENSOR BRACKET ELEVATOR BRACKET GUIDE

ELEVATOR BRACKET FRONT TRAIN HEAD

TRAIN JOIN SPRING GOODS WAGON TRAIN BASE HANDLE COVER

HANDLE COVER SUPPORT-B HANDLE COVER SUPPORT HURDLE 3 ACRYL-L SB-32SA-05 MCAP0MEP011 MCAP0MEP010 MELE0PHO011 MCAP0MEP026 MCAP1MEP009 MCAP0MEP008 MWET0PLA003 MWET0SPR003 MWET0PLA005 MWET0PLA002 MCAP0ACR011 MCAP0MEP085 MCAP1MEP018 MCAP1ACR001 1 2 6 4 14 1 1 4 6 2 2 2 1 15 16 17 18 19 20 21 22 23 24 25 26 27 28 HURDLE 3 ACRYL-R TONADO SEMS

FLAT HEAD CAP SCREW PH

1TH(ROUND HEAD WRENCH TYPE) SEMS

FLAT HEAD CAP SCREW PH WRENCH BOLT PH M3×10 M3×10 M4×12 M4×16 M4×20 M4×12-Ni Plated M4×20 M4×20 M4×25 M4×30 M3×30 MCAP1ACR002 MWET0SPR004 1 2 3 4 5 6 8 9 7 19 27 20 21 10 11 22 24 12 23 13 17 18 17 19 25 14 19 15 26 16

(60)

8. ASSEMBLY DRAWING AND PARTS LIST

1 2 1

No. NAME SPEC Q’TY CODE NO. No. NAME SPEC Q’TY CODE NO. 1 2 3 CABINET LOW LAMP CLAMP ELECTRONIC BALLAST FL20W-DK2221 MCAP0WOO005 MWET0PRO007 MELE0BAL001 2 1 2 7 8 9 FND 2 PCB ASS'Y FND 1 PCB ASS'Y SPEAKER 4.5 inch ACAP0PCB003 ACAP0PCB002 MZZZ0SPE004 1 2 10 10 3 4 11 5 11 6 7 8 12 9 10

(61)

8. ASSEMBLY DRAWING AND PARTS LIST

1 2 1

No. NAME SPEC Q’TY CODE NO. No. NAME SPEC Q’TY CODE NO. 1 2 3 BILLBOARD COVER SPEAKER COVER BILLBOARD ACRYL MCAP0PLA002 MCAP0MEP092 MCAP0ACR008 2 6 14 4 5 6 SPEAKER NET TRUSS BOLT RIVER BOLT M6×30 M4×10 MCAP0MEP086 5 2 1 6 3 5 4

(62)

(63)

(64)

(65)

(66)

(67)

(68)