• No results found

high power laser systems

EMP control and characterisation on high-power laser systems

EMP control and characterisation on high-power laser systems

... energy, when more escaping electrons can be produced. Since the GHz component of the EMP is caused by a neutralization current propagating across the target stalk, by reducing the magnitude and duration of this current ...

8

Packing and Characterizing High- power Laser Diode

Packing and Characterizing High- power Laser Diode

... packaging high-power laser diodes, they normally use a combination of different technological equipment such as a Clean Room, Die/Wire Bonders, Optical Table Systems, Alignment Stages, Probe ...

10

Microstructural Characterization of Thermal Barrier Coatings
Glazed by a High Power Laser

Microstructural Characterization of Thermal Barrier Coatings Glazed by a High Power Laser

... propulsion systems. Plasma-sprayed thermal barrier coatings have relatively high interconnected porosity and lamina structure, which bring out low bond strength, and lead to a short thermal cycling ...were ...

5

The development of high power, pulsed fiber laser systems and their applications

The development of high power, pulsed fiber laser systems and their applications

... Therefore, high pump intensity can lead to peak gain at wavelengths close to 1030 nm, whereas lower pump intensities result in gain at wavelengths >1070 ...very high pump-intensities due to ~100% overlap ...

181

Advances in high power short pulse fiber laser systems and technology

Advances in high power short pulse fiber laser systems and technology

... the power is contained within a hollow-core and is delivered in a single ...for high power pulsed amplification ...CPA systems [33, ...fiber laser has also now been reported, and due to ...

9

Ellipsoidal plasma mirror focusing of high power laser pulses to ultra-high intensities

Ellipsoidal plasma mirror focusing of high power laser pulses to ultra-high intensities

... of high-power laser-plasma science new avenues of research have been enabled by increasing the peak laser intensity ...include laser- driven particle acceleration [1, 2], radiation ...

20

Centrifuge Modelling With Transparent Soil and Laser Aided Imaging

Centrifuge Modelling With Transparent Soil and Laser Aided Imaging

... new laser module was purchased specifically for use on the University of Sheffield centrifuge platform from Kvant Laser Systems ...separate laser module rated 1 W at 520 nm wavelength and a ...

14

High power disk laser

High power disk laser

... of high av- erage power lasers, only sources operating in two re- gimes find applications, ...P-P laser sources with a pulse repetition rate up to hundreds of Hz and pulse duration from tens of ...

7

Nd:YVO4 microchip lasers and amplifiers

Nd:YVO4 microchip lasers and amplifiers

... of high power laser diode pumped bulk Nd:YV04 systems and microchip based Nd:YV04.. Summarized through the first part of this chapter are the main conclusions drawn from[r] ...

198

Advanced high power pulsed fibre laser systems and their applications

Advanced high power pulsed fibre laser systems and their applications

... increasing power levels produced by fibre sources in CW and pulsed operation, photodarkening has appeared as another limiting factor for further power ...reason, high-energy pulsed system with an ...

157

Plasma Mirrors for Cleaning Laser Pulses from the Infrared to the Ultraviolet

Plasma Mirrors for Cleaning Laser Pulses from the Infrared to the Ultraviolet

... Ultrashort laser pulses are generally preceded by prepulses which – in case of high main pulse intensities - may generate preplasmas on solid surfaces, thus making the initial conditions for the ...

6

Kreuzer, Christian
  

(2018):


	Technological developments for Laser Ion Acceleration.


Dissertation, LMU München: Fakultät für Physik

Kreuzer, Christian (2018): Technological developments for Laser Ion Acceleration. Dissertation, LMU München: Fakultät für Physik

... Generating high power laser pulses is a challenging ...scale laser (NOVA laser [73]) has been successfully oper- ...then, laser systems worldwide have been established, ...

140

Pulses on Demand in Fibre and Hybrid Lasers

Pulses on Demand in Fibre and Hybrid Lasers

... for high-precision manufacturing processes, laser-based tools are ...flexible laser systems, capable of processing advanced patterns and structures at high speeds, has ...a laser ...

10

Different Coating Processes for Surface Hardening of Aluminium

Different Coating Processes for Surface Hardening of Aluminium

... developing automatic laser cladding machines. Maximun process parameters must be manually set like laser power, laser focal point, substrate velocity, powder injection rate, etc., and thus it ...

5

Dropout dynamics in pulsed quantum dot lasers due to mode jumping

Dropout dynamics in pulsed quantum dot lasers due to mode jumping

... with high- and antireflection coatings on the rear and front facets lase either at the GS (around 1265 nm, 50 mA threshold at the pulsed pump) or simultaneously at the GS and ES (around 1190 nm, 1:5 A threshold at ...

6

A Review of HVDC Converter Topologies

A Review of HVDC Converter Topologies

... An Enhanced Equivalent Model (EEM) of the monopole half bridge symmetrical modular multilevel converter has introduced [25], [26] to analyze he electromagnetic transients. The existing model has compared with this ...

9

High power (60mW) single frequency erbium:ytterbium codoped fiber laser

High power (60mW) single frequency erbium:ytterbium codoped fiber laser

... Recent modelling of single frequency Yb:Er fibre laser.?, has pointed out that fibres with a high concentrationof Er and Yb ions should show reduced bottlenecking due to the increased Yb[r] ...

5

On the Management of Power Constraints for High Performance Systems.

On the Management of Power Constraints for High Performance Systems.

... work, power was shifted within systems via scheduling while adhering to a global power cap [ Ell15 ] ...unused power, it does not detect wasteful power consumption of the processors at ...

112

Ozawa, Akira
  

(2009):


	Frequency combs in the extreme ultraviolet.


Dissertation, LMU München: Fakultät für Physik

Ozawa, Akira (2009): Frequency combs in the extreme ultraviolet. Dissertation, LMU München: Fakultät für Physik

... infinitely high potential barrier in order to obtain discretized energy levels for ionized ...The high harmonic spectrum is obtained by taking the Fourier transform of the dipole ...obtained high ...

157

Haffa, Daniel
  

(2019):


	Tailored online diagnostics for a laser-driven plasma ion source prototype.


Dissertation, LMU München: Fakultät für Physik

Haffa, Daniel (2019): Tailored online diagnostics for a laser-driven plasma ion source prototype. Dissertation, LMU München: Fakultät für Physik

... repetition rate of 1 Hz. In our experiment the energy was attenuated to about 12 J on target with enhanced temporal contrast using a re-collimating single plasma mir- ror [231]. Using plastic foil targets with a ...

221

Show all 10000 documents...

Related subjects