Iron and Alloys
Tissue Reactions and Sensitivity to Iron Chromium Alloys
... materials: Iron (Fe)–chromium (Cr) binary alloys with various Cr compositions (10%Cr–Fe alloy, 15%Cr–Fe alloy, 20%Cr–Fe alloy, 30%Cr–Fe alloy), pure Cr (100%Cr) and 316L type stainless steel (SUS316L) were ...
7
Factors affecting the constitution and stability of iron base austenitic alloys
... scans across an austenite grain for iron, chromium and nickel. It is clearly demonstrated that within experimental error the element composition across the grain was constant, thereby confirming that the ...
301
A structural investigation of the passive film on iron and iron/chromium alloys
... on iron is a semiconductor in nature, a lot o f effort has gone into the study o f its electronic structure using photocurrent ...on iron 30 which has been found to be significantly different from that ...
144
Anisotropy of Magnetostriction of Functional BCC Iron Based Alloys
... Ga alloys applied with magnetic fields along the [010] direction is shown in ...FeGa alloys are related to the magnetoelastic properties discussed in previous ...FeGa alloys under a moderate ...
10
Fatigue crack growth in iron silicon alloys
... industrial alloys are not ideally suited to the task of determining the basic mechanisms occurring at low fatigue crack growth ...An iron silicon, single phase, system was considered ideal for the purpose ...
367
Determination of Young’s Modulus of Aluminium, Copper, Iron, Brass and Steel Alloys by Using Double Exposure Holographic Interferometry (DEHI) Technique
... In case of steel alloys K 1 , K 2 and K 3 (general titles given) value of Y found is higher than that of iron. It is mostly dependent of percentage of carbon in that alloy. This percentage of carbon is ...
5
Decarburization of iron carbon alloys with oxidising slags
... It has now been well established that during oxygen steelmaking a great portion of the metallic charge is found dispersed in the slag forming a metal-slag-gas emulsion (70,83,86,87). In order to attain an insight into ...
387
Thermo Mechanical Processing of Iron Phosphorous Carbon Alloys
... Modern iron and steel industry is based on the iron – carbon ...these alloys is that they corrode and cause losses to the tune of 5% of GDP to the ...Indian Iron artefacts like the Delhi ...
8
Massive and martensitic transformations in very dilute iron-carbon alloys.
... pure iron, based on extrapolation from iron-chromium data, of 700°C and use a thermodynamic approach to sup port their ...dilute iron-carbon ...
84
Electrochemical investigations on formation and pitting susceptibility of passive films on iron and iron-based alloys
... its alloys are the most popular metallic materials that have been used in ...on iron or iron-based alloys have not yet been well ...on iron and iron-based alloys in ...
39
Development of Alloys on an Iron Basis
... in alloys considerably is not shown that proves to be true the diagramme presented on ...and alloys on its basis possess high damping ability at small and at considerable amplitudes of deformation ( = ...
7
Mechanical and Tribological Characterisation of Sintered Iron and Aluminium based Alloys
... based iron alloys are to be evaluated using powder metallurgy ...of iron based alloy compositions are prepared by varying nickel and chromium at ...of iron, alluminium, nickel and chromium ...
5
Method of forming magnetostrictive rods from rare earth-iron alloys
... magnetrostructive alloys of iron with rare earth elements are formed by flowing a body of rare earth- iron alloy in a crucible enclosed in a chamber maintained under an inert gas atmosphere, forcing ...
10
Rhombohedral magnetostriction in dilute iron (Co) alloys Nicholas J. Jones
... The magnetostriction and elastic constants of pure iron and two compositions of single crystal Fe-Co alloys (low Co concentration) have been measured. By adding small percen- tages of Co to the Fe matrix, ...
7
Preparations of rare earth iron alloys by thermite reduction
... conditions, to a temperature suf?cient to react the rare An improved method for the preparation of high earth and iron ?uoride mixture with the calcium to form purity rare earth-iron all[r] ...
6
Twin Roll Strip Casting of Iron Base Amorphous Alloys
... amorphous alloys, e.g., Zr- and Cu-base alloys, can be continuously fabricated in sheet form by twin-roll strip casting which can produce flat rolled products directly from melt in a single ...base ...
5
A study of the transformation behaviour and mechanical properties of iron manganese alloys
... Available from Sheffield Hallam University Research Archive SHURA at: http://shura.shu.ac.uk/19367/.. This document is the author deposited version.[r] ...
355
Investigation of the magnetic properties of copper, aluminium and iron copper alloys
... All rights reserved INFORMATION TO ALL USERS The quality of this reproduction is dependent upon the quality of the copy submitted.. In the unlikely event that the author did not send a c[r] ...
157
Gyromagnetic Ratios for Iron, Cobalt and Certain Binary Alloys of Iron, Cobalt and Nickel
... 1 The horizontal component of the residual earth's field acting on the horizontal component of the magnetic moment of the rotor h will produce a torque about a vertical axis... If the ho[r] ...
74
An investigation of aluminum-iron alloys from powders as possible electrical strip.
... Under this license, works must always be attributed to the copyright holder (original author), cannot be used for any commercial purposes, and may not be altered.. Any other use would..[r] ...
93