ISM Band
A Survey on Interference Mitigation Techniques for 2 4 GHz ISM Band
... When a narrowband signal is elaborated into a large or wide band spectrum, then the wide band spectrum is termed as spread spectrum. Nowadays both WPAN and WLAN techniques are using this spread spectrum. ...
5
ANN and FA Based Design of Hybrid Fractal Antenna for ISM Band Applications
... Abstract—In this paper, a compact Giuseppe Peano, Cantor Set, and Sierpinski Carpet fractals based hybrid fractal antenna (GCSA) is designed and developed for Industrial, Scientific and Medical (ISM) band ...
14
Design Of Band Pass Filter Embedded With Low Noise Amplifier For Ism Band Applications
... The Co-design of Band Pass Filter embedded with Low Noise Amplifier for ISM band application is presented in this paper. LNA stand-alone and BPF-LNA with lumped and distributed components are ...
8
Performance of Efficient CMOS Power Amplifier for ISM Band Applications
... Abstract: Power amplifiers are one of the most important functional blocks in the Radio Frequency (RF) frontend for reliable wireless communications. The power amplifiers amplify and boost the input signal to needed ...
6
Design of an Implantable Antenna Operating at ISM Band Using Magneto-Dielectric Material
... Abstract—A novel technique to design a wideband implantable antenna has been proposed by using magneto-dielectric material. The antenna is a half cutting of a coplanar waveguide fed antenna with symmetric geometry ...
8
Co-Operative Spectrum Sensing In Cognitive Radio Network in ISM Band
... One of the promising solution for the underutilized spectrum in the wireless communication is cognitive radio network.it gives the solution for the unlicensed users (i.e. Secondary users) by utilizing the unused spectrum ...
7
Analysis of scanned channel estimation in 2.4 GHz ISM Band
... Mehdi Vasef [3] presented an investigative approach which includes Laplace’s method for determining effective capacity of uncorrelated Rayleigh fading channel when uncorrelated Rayleigh fading interference is present. ...
5
A Multiple Antenna System for ISM Band Transmission
... We present a multiple antenna system for industrial, scientific, and medical (ISM)-band transmission (MASI). The hardware demonstrator was developed and realized at our institute. It enables multiple-input ...
13
A Compact CPW Fed UWB Antenna with Quad Band Notch Characteristics for ISM Band Applications
... A compact UWB patch antenna with quad notched-bands is presented in this paper. The method combines mender-line strip, couple of F-slots, inverted diamond-slot, and pair of J-slots on a UWB antenna to reject four bands ...
10
An ISM Band Conventional CPW Rectenna for Low Power Levels
... In this work, we propose to use coplanar waveguide (CPW) technology depicted in Figure 1 to construct a rectenna operating in the ISM band 2.4–2.5 GHz. In this technology, the ground planes and the ...
10
PLANAR ANTENNA DESIGNS FOR ISM BAND WIRELESS APPLICATIONS
... The objective of this project was to develop a planar single element microstrip antenna and antenna array that have a good performance in terms of bandwidth and gain for ISM band wireless applications. The ...
12
ISM Band Radio for Wireless Monitoring and Control
... The ISM Band Radio operates in license free band of ...2.4835GHz. ISM Band Radio module consists of User interface card and RF interface ...So, ISM Band Radio’s wireless ...
5
Design and Analysis of 2X2 MIMO System for 2 4 GHz ISM Band Applications
... The industrial, scientific and medical (ISM) radio bands are radio bands (portions of the radio spectrum) reserved internationally for the use of radio frequency (RF) energy for industrial, scientific and medical ...
5
Design & Simulation of Rectangular Shaped Patch Antenna Used for ISM band using HFSS
... The design procedure used throughout thesis is applicable for antennas that work in the frequency range of ISM band. The frequency band is used in Cordless phones, Bluetooth devices, NFC devices, and ...
5
Statistical Analysis And Optimization Of A Low Noise Amplifier Operating At 5.8 Ghz ISM Band
... The objective of this project is to design a low noise amplifier, simulate and optimize the circuit of a low noise amplifier which is operating at 5.8 GHz ISM band with overall gain of at least 40 dB and ...
24
DISSEMINATE INNOVATIVE SKY TIE EXPERTISE FOR LONG DISTANCE COMMUNIQUÉ TO P2P DURING ISM BAND 2.4 GHZ
... Communication is as most proven and one of the most effective in human life cycle. In this world every using mobile along with Bluetooth and Wi-Fi [1].These two processes working through 2.4GHz ISM Band and ...
10
Design Of Slotted Meander Line Antenna With Probe Feed Method For ISM Band Application
... The main objective of this project is to design, simulate and fabricate a slotted meander line antenna to be used at ISM band (2.4 – 2.5 GHz). It is designed to be smaller in size compared to existing ...
24
Design Of Parasitic Meander Line Antenna At ISM Band
... The scope of the project is designing the basic meander line antenna then enhances the design by adding parasitic element at low cost of simple structure. The parasitic meander line antenna is designed to operate at ...
24
Investigation Of Wireles Implant’s Performance At ISM Band For Medical Application: A Simulation-Based Analysis
... The main objective of this project is to achieve a high performance rate in term of the antenna gain and also its radiation efficiency. This two parameter is very important in order to know whether the antenna designed ...
24
Design Of Slot X-Polarized Microstrip Patch Antenna At ISM Band
... xv are varied 4.2.4 a X-polarized microstrip patch antenna 59 4.2.4 b Simulation result for X-polarized microstrip patch antenna 60 4.2.5.1 a X-slot X-polarized microstrip patch antenna [r] ...
24