Kelvin Probe Force Microscopy
Surface Characterisation of a Ferroelectric Single Crystal by Kelvin Probe Force Microscopy
... Surface Characterisation of a Ferroelectric Single Crystal by Kelvin Probe Force Microscopy Kenny Lau 1 , Yun Liu 1* , Qian Li 1 , Zhenrong Li 2 , Ray L. Withers 1 , Zhuo Xu 2 1 Research ...
5
Applications of Kelvin Probe Force Microscopy in the characterization of 2D materials and their composites
... Kelvin Probe Force Microscopy (KPFM), since its relatively recent introduction in 1991, has become a widely used technique to assess surface charge distribution and work fu[r] ...
134
Quantitative dopant profiling in semiconductors: A new approach to Kelvin probe force microscopy
... In the presented work it is shown that Kelvin probe force microscopy (KPFM) is a very promising electrical nanometrology technique to face this challenge. The technical and physical aspects of ...
161
Investigation of the Surface Potential on Iron Nanoparticles During the Corrosion by Atomic Force Microscopy (AFM) and Kelvin Probe Force Microscopy (KFM)
... atomic force microscopy (AFM) and Kelvin probe force microscopy (KFM) was a powerful technique to obtain high-resolution maps of the surface potential distribution on the pure ...
11
MOVPE-grown quantum cascade laser structures studied by Kelvin probe force microscopy
... Abstract: A technique for direct study of the distribution of the applied voltage within a quantum cascade laser (QCL) has been developed. The detailed profile of the potential in the laser claddings and laser core ...
9
Potential Dip in Organic Photovoltaics Probed by Cross sectional Kelvin Probe Force Microscopy
... Jongjin Lee 1* and Jaemin Kong 2 Abstract Cross-sectional potential distribution of high open-circuit voltage bulk heterojunction photovoltaic device was measured using Kelvin probe force ...
7
Low Temperature Reduction of Graphene Oxide: Electrical Conductance and Scanning Kelvin Probe Force Microscopy
... Atomic force microscopy, Scanning Kelvin probe force microscopy, Raman spectroscopy, FTIR spectroscopy Background Graphene and graphene-based materials have very attractive ...
11
Investigation of Kelvin probe force microscopy efficiency for the detection of hydrogen ingress by cathodic charging in an aluminium alloy
... a Universite´ de Toulouse, CIRIMAT, UPS/INPT/CNRS, ENSIACET, 4 alle´e Emile Monso, BP 44362, 31030 Toulouse Cedex 4, France b Universite´ de Toulouse, LGP, ENIT, 47 avenue d’Azereix, BP 1629, 65016 Tarbes Cedex, France ...
6
Investigation of Filiform Corrosion of Epoxy-Coated 1045 Carbon Steel by Scanning Kelvin Probe Force Microscopy
... The mechanism for filiform corrosion (FFC) is thought to involve oxygen diffusion through the tail to the active head. The primary cathodic region is near the back of the head (at the head/tail boundary), where oxygen ...
17
Super-resolution and signal separation in contact Kelvin probe force microscopy of electrochemically active ferroelectric materials
... To probe the coupled polarization and electrochemical behaviors in these materials, we use the contact Kelvin Probe Force Microscopy (cKPFM) ...piezoresponse force spectroscopy ...
15
Molecular Dynamics simulations and Kelvin Probe Force microscopy to study of cholesterol-induced electrostatic nanodomains in complex lipid mixtures
... Atomic force microscopy (AFM) is one of the few methods which provides direct, nanoscale information on membrane organization 22-26 ...is Kelvin Probe Force Microscopy (KPFM), a ...
19
Crystallographic order and decomposition of [MnIII6CrIII]3+ single molecule magnets deposited in submonolayers and monolayers on HOPG studied by means of molecular resolved atomic force microscopy (AFM) and Kelvin probe force microscopy in UHV
... atomic force microscopy (nc-AFM) as well as by Kelvin probe force microscopy (KPFM) show island-like structures with heights resembling the height of the ...
8
Sub-Microscopic Phenomena of Metallic Corrosion Studied by a Combined Photoelectron Spectroscopy in Air (PESA) and Scanning Kelvin Probe Force Microscopy (SKPFM) Approach
... Scanning Kelvin Probe Force Microscopy (SKPFM), the two components today can be readily measured at the atomic-level resolution and ...
20
Phase Separation in Ti-6Al-4V Alloys with Boron Additions for Biomedical Applications: Scanning Kelvin Probe Force Microscopy Investigation of Microgalvanic Couples and Corrosion Initiation
... scanning Kelvin probe force microscopy and scanning electron microscopy/energy-dispersive spectroscopy revealed the presence of both alpha (a) and beta (b) phase titanium, enriched in ...
11
Time-Resolved Kelvin Probe Force Microscopy of Nanostructured Devices
... A second, conventional KPFM control loop operating at a different modulation frequency is used to minimize the remnant electric force.. Both the probe signal and the output of the second[r] ...
170
AFM tip characterization by Kelvin probe force microscopy - Supporting information -
... In this supporting information, three dierent models for the calculation of the mean Kelvin voltage are considered. All models assume that the macroscopic part of the AFM tip and the surface can be represented by ...
5
Characterization of Corrosion Interfaces by the Scanning Kelvin Probe Force Microscopy Technique
... mation on defects at the metal-coating interface. 27-30 Standard scan- ning Kelvin probes have a lateral resolution for potential measure- ment of around 100 m. 23 The advantage of the SKPFM lies in its enhanced ...
11
Electronic Disorder in Organic Semiconducting Films Observed with Kelvin Probe Force Microscopy
... The contents of this paper will describe for the case of diF-TES-ADT further study of the effects of grain boundaries and the interfacial effect of organic thin films with dielectrics on electrostatic properties related ...
147
Kelvin Probe Force Microscopy on Graphene Thin Films for Solar Cell and Biosensing Applications
... Although Kelvin probe force microcopy is useful technique for our goal, it cannot determine the exact nature of the chemical interactions between different ...
212
Investigation of electrical contact resistances in graphene-based devices by Kelvin Probe Force Microscopy
... In Figure 5.8a the KPFM map of a FGS 24 device at V ds = 2 V is shown. At this level of reduction, a more gradual change in the contrast from drain contact to FGS and from FGS to source contact can be observed. In Figure ...
173